! Started logfile: J1458+0416_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:56:42 2017 obs J1458+0416_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1458+0416_S_2015_01_22_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6125 visibilities/baseline/integration-bin. ! Found source: J1458+0416 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 1764 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1458+0416_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.840726Jy sigma=0.009259 ! Fit after self-cal, rms=0.836587Jy sigma=0.009218 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.721 mas, bmaj=7.1 mas, bpa=2.225 degrees ! Estimated noise=1792.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125661 Jy ! Component: 100 - total flux cleaned = 0.158464 Jy ! Total flux subtracted in 100 components = 0.158464 Jy ! Clean residual min=-0.008679 max=0.013382 Jy/beam ! Clean residual mean=0.000007 rms=0.002493 Jy/beam ! Combined flux in latest and established models = 0.158464 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.158464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080555Jy sigma=0.000802 ! Fit after self-cal, rms=0.080524Jy sigma=0.000802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=7.719 mas, bpa=-0.303 degrees ! Estimated noise=1560.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153185 Jy ! Component: 100 - total flux cleaned = 0.0224564 Jy ! Component: 150 - total flux cleaned = 0.0263975 Jy ! Component: 200 - total flux cleaned = 0.0286789 Jy ! Total flux subtracted in 200 components = 0.0286789 Jy ! Clean residual min=-0.005570 max=0.005495 Jy/beam ! Clean residual mean=-0.000002 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.187143 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 43 components and 0.187142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077452Jy sigma=0.000773 ! Fit after self-cal, rms=0.077432Jy sigma=0.000773 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.14 ! LA 1.05 MK 0.99 NL 0.92 OV 0.95 ! PT 1.03 SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.02 ! LA 1.07 MK 0.97 NL 1.04 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.07 KP 0.90 ! LA 0.85 MK 1.05 NL 1.02 OV 0.90 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.95 KP 0.83 ! LA 0.99 MK 1.08 NL 1.00 OV 0.96 ! PT 1.12 SC 0.98 ! ! ! Fit before self-cal, rms=0.077432Jy sigma=0.000773 ! Fit after self-cal, rms=0.074465Jy sigma=0.000751 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.747 mas, bpa=-0.2145 degrees ! Estimated noise=1560.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423815 Jy ! Component: 100 - total flux cleaned = -0.000424078 Jy ! Component: 150 - total flux cleaned = -0.000454422 Jy ! Component: 200 - total flux cleaned = -0.000507768 Jy ! Total flux subtracted in 200 components = -0.000507768 Jy ! Clean residual min=-0.005294 max=0.004760 Jy/beam ! Clean residual mean=-0.000000 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.186635 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.186635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074434Jy sigma=0.000751 ! Fit after self-cal, rms=0.074413Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074413Jy sigma=0.000751 ! Fit after self-cal, rms=0.074501Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=7.75 mas, bpa=-0.1859 degrees ! Estimated noise=1561.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149504 Jy ! Component: 100 - total flux cleaned = -0.000149435 Jy ! Component: 150 - total flux cleaned = -0.000174723 Jy ! Component: 200 - total flux cleaned = -0.000174813 Jy ! Total flux subtracted in 200 components = -0.000174813 Jy ! Clean residual min=-0.005249 max=0.004753 Jy/beam ! Clean residual mean=-0.000000 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.18646 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.18646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074482Jy sigma=0.000750 ! Fit after self-cal, rms=0.074478Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.23688e-06 Jy ! Component: 100 - total flux cleaned = -1.81449e-05 Jy ! Component: 150 - total flux cleaned = -1.77456e-05 Jy ! Component: 200 - total flux cleaned = -1.78799e-05 Jy ! Total flux subtracted in 200 components = -1.78799e-05 Jy ! Clean residual min=-0.005222 max=0.004744 Jy/beam ! Clean residual mean=-0.000000 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.186442 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.186442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074466Jy sigma=0.000750 ! Fit after self-cal, rms=0.074462Jy sigma=0.000750 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074462Jy sigma=0.000750 ! Fit after self-cal, rms=0.074515Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.752 mas, bpa=-0.1884 degrees ! Estimated noise=1563.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1776e-06 Jy ! Component: 100 - total flux cleaned = 1.11373e-06 Jy ! Component: 150 - total flux cleaned = 4.16546e-07 Jy ! Component: 200 - total flux cleaned = -4.51196e-07 Jy ! Total flux subtracted in 200 components = -4.51196e-07 Jy ! Clean residual min=-0.005178 max=0.004741 Jy/beam ! Clean residual mean=-0.000000 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.186442 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.186442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074506Jy sigma=0.000750 ! Fit after self-cal, rms=0.074503Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.15555e-06 Jy ! Component: 100 - total flux cleaned = -2.01324e-05 Jy ! Component: 150 - total flux cleaned = -2.86983e-06 Jy ! Component: 200 - total flux cleaned = -2.72201e-06 Jy ! Total flux subtracted in 200 components = -2.72201e-06 Jy ! Clean residual min=-0.005152 max=0.004734 Jy/beam ! Clean residual mean=-0.000000 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.186439 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 61 components and 0.186439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074495Jy sigma=0.000750 ! Fit after self-cal, rms=0.074493Jy sigma=0.000750 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074493Jy sigma=0.000750 ! Fit after self-cal, rms=0.074507Jy sigma=0.000750 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.171 mas, bmaj=13.51 mas, bpa=-10.95 degrees ! Estimated noise=2075.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101152 Jy ! Component: 100 - total flux cleaned = 7.66363e-05 Jy ! Component: 150 - total flux cleaned = 3.97162e-05 Jy ! Component: 200 - total flux cleaned = 9.89879e-06 Jy ! Total flux subtracted in 200 components = 9.89879e-06 Jy ! Clean residual min=-0.005214 max=0.004270 Jy/beam ! Clean residual mean=0.000000 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.186449 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 67 components and 0.186449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074505Jy sigma=0.000750 ! Fit after self-cal, rms=0.074497Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.21921e-05 Jy ! Component: 100 - total flux cleaned = -4.04673e-05 Jy ! Component: 150 - total flux cleaned = -5.62575e-05 Jy ! Component: 200 - total flux cleaned = -8.20272e-05 Jy ! Total flux subtracted in 200 components = -8.20272e-05 Jy ! Clean residual min=-0.005201 max=0.004297 Jy/beam ! Clean residual mean=0.000000 rms=0.001331 Jy/beam ! Combined flux in latest and established models = 0.186367 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 68 components and 0.186367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074497Jy sigma=0.000750 ! Fit after self-cal, rms=0.074492Jy sigma=0.000750 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.752 mas, bpa=-0.1921 degrees ! Estimated noise=1563.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.752 at -0.1921 degrees (North through East) ! Clean map min=-0.0049248 max=0.16516 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=7.123 mas, bpa=2.265 degrees ! Estimated noise=1797.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125849 Jy ! Component: 100 - total flux cleaned = 0.158872 Jy ! Component: 150 - total flux cleaned = 0.172092 Jy ! Component: 200 - total flux cleaned = 0.178629 Jy ! Total flux subtracted in 200 components = 0.178629 Jy ! Clean residual min=-0.005892 max=0.005043 Jy/beam ! Clean residual mean=0.000002 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 0.178629 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.178629 Jy ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.752 mas, bpa=-0.1921 degrees ! Estimated noise=1563.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428424 Jy ! Component: 100 - total flux cleaned = 0.00658966 Jy ! Component: 150 - total flux cleaned = 0.00703783 Jy ! Component: 200 - total flux cleaned = 0.0071467 Jy ! Total flux subtracted in 200 components = 0.0071467 Jy ! Clean residual min=-0.005289 max=0.004693 Jy/beam ! Clean residual mean=0.000000 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 0.185776 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.185776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.171 mas, bmaj=13.51 mas, bpa=-10.95 degrees ! Estimated noise=2075.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893795 Jy ! Component: 100 - total flux cleaned = 0.000900291 Jy ! Component: 150 - total flux cleaned = 0.00087682 Jy ! Component: 200 - total flux cleaned = 0.000856616 Jy ! Total flux subtracted in 200 components = 0.000856616 Jy ! Clean residual min=-0.005100 max=0.004325 Jy/beam ! Clean residual mean=0.000000 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.186633 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.21094e-05 Jy ! Component: 100 - total flux cleaned = -5.93109e-05 Jy ! Component: 150 - total flux cleaned = -8.20311e-05 Jy ! Component: 200 - total flux cleaned = -8.25488e-05 Jy ! Total flux subtracted in 200 components = -8.25488e-05 Jy ! Clean residual min=-0.005127 max=0.004309 Jy/beam ! Clean residual mean=0.000000 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.18655 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.18655 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.752 mas, bpa=-0.1921 degrees ! Estimated noise=1563.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319536 Jy ! Component: 100 - total flux cleaned = 0.000197569 Jy ! Component: 150 - total flux cleaned = 9.13507e-05 Jy ! Component: 200 - total flux cleaned = 6.05569e-05 Jy ! Total flux subtracted in 200 components = 6.05569e-05 Jy ! Clean residual min=-0.005214 max=0.004637 Jy/beam ! Clean residual mean=-0.000000 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.186611 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 0.186611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074538Jy sigma=0.000750 ! Fit after self-cal, rms=0.074531Jy sigma=0.000750 wmodel J1458+0416_S_2015_01_22_pus_map.mod ! Writing 63 model components to file: J1458+0416_S_2015_01_22_pus_map.mod wobs J1458+0416_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1458+0416_S_2015_01_22_pus_uvs.fits wwins J1458+0416_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1458+0416_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0014386 Jy ! Component: 100 - total flux cleaned = -0.00220686 Jy ! Component: 150 - total flux cleaned = -0.00282948 Jy ! Component: 200 - total flux cleaned = -0.00353428 Jy ! Component: 250 - total flux cleaned = -0.00438158 Jy ! Component: 300 - total flux cleaned = -0.00472428 Jy ! Component: 350 - total flux cleaned = -0.00488972 Jy ! Component: 400 - total flux cleaned = -0.00515098 Jy ! Component: 450 - total flux cleaned = -0.00525136 Jy ! Component: 500 - total flux cleaned = -0.00549335 Jy ! Component: 550 - total flux cleaned = -0.00558683 Jy ! Component: 600 - total flux cleaned = -0.0056324 Jy ! Component: 650 - total flux cleaned = -0.00545908 Jy ! Component: 700 - total flux cleaned = -0.00554527 Jy ! Component: 750 - total flux cleaned = -0.00558638 Jy ! Component: 800 - total flux cleaned = -0.0055861 Jy ! Component: 850 - total flux cleaned = -0.00562583 Jy ! Component: 900 - total flux cleaned = -0.00566541 Jy ! Component: 950 - total flux cleaned = -0.00581503 Jy ! Component: 1000 - total flux cleaned = -0.00577815 Jy ! Component: 1050 - total flux cleaned = -0.0058848 Jy ! Component: 1100 - total flux cleaned = -0.0059187 Jy ! Component: 1150 - total flux cleaned = -0.00588432 Jy ! Component: 1200 - total flux cleaned = -0.00595172 Jy ! Component: 1250 - total flux cleaned = -0.00601737 Jy ! Component: 1300 - total flux cleaned = -0.00598512 Jy ! Component: 1350 - total flux cleaned = -0.00598512 Jy ! Component: 1400 - total flux cleaned = -0.00598525 Jy ! Component: 1450 - total flux cleaned = -0.00598464 Jy ! Component: 1500 - total flux cleaned = -0.00592337 Jy ! Component: 1550 - total flux cleaned = -0.00589346 Jy ! Component: 1600 - total flux cleaned = -0.00589315 Jy ! Component: 1650 - total flux cleaned = -0.00592171 Jy ! Component: 1700 - total flux cleaned = -0.00589266 Jy ! Component: 1750 - total flux cleaned = -0.00597707 Jy ! Component: 1800 - total flux cleaned = -0.00600471 Jy ! Component: 1850 - total flux cleaned = -0.00605961 Jy ! Component: 1900 - total flux cleaned = -0.006114 Jy ! Component: 1950 - total flux cleaned = -0.00611398 Jy ! Component: 2000 - total flux cleaned = -0.0060069 Jy ! Component: 2050 - total flux cleaned = -0.00600698 Jy ! Component: 2100 - total flux cleaned = -0.00595422 Jy ! Component: 2150 - total flux cleaned = -0.00598058 Jy ! Component: 2200 - total flux cleaned = -0.00595461 Jy ! Component: 2250 - total flux cleaned = -0.00598082 Jy ! Component: 2300 - total flux cleaned = -0.00600685 Jy ! Component: 2350 - total flux cleaned = -0.00600689 Jy ! Component: 2400 - total flux cleaned = -0.00600678 Jy ! Component: 2450 - total flux cleaned = -0.00603259 Jy ! Component: 2500 - total flux cleaned = -0.00600683 Jy ! Component: 2550 - total flux cleaned = -0.006058 Jy ! Component: 2600 - total flux cleaned = -0.00613459 Jy ! Component: 2650 - total flux cleaned = -0.0061346 Jy ! Component: 2700 - total flux cleaned = -0.00616004 Jy ! Component: 2750 - total flux cleaned = -0.00621116 Jy ! Component: 2800 - total flux cleaned = -0.00623675 Jy ! Component: 2850 - total flux cleaned = -0.00623668 Jy ! Component: 2900 - total flux cleaned = -0.00623685 Jy ! Component: 2950 - total flux cleaned = -0.00626243 Jy ! Component: 3000 - total flux cleaned = -0.00631385 Jy ! Component: 3050 - total flux cleaned = -0.00633969 Jy ! Component: 3100 - total flux cleaned = -0.00633978 Jy ! Component: 3150 - total flux cleaned = -0.00631376 Jy ! Component: 3200 - total flux cleaned = -0.00633977 Jy ! Component: 3250 - total flux cleaned = -0.00626119 Jy ! Component: 3300 - total flux cleaned = -0.00620841 Jy ! Component: 3350 - total flux cleaned = -0.00615517 Jy ! Component: 3400 - total flux cleaned = -0.0061282 Jy ! Component: 3450 - total flux cleaned = -0.00604715 Jy ! Component: 3500 - total flux cleaned = -0.00599261 Jy ! Component: 3550 - total flux cleaned = -0.00591014 Jy ! Component: 3600 - total flux cleaned = -0.0058822 Jy ! Component: 3650 - total flux cleaned = -0.00588254 Jy ! Component: 3700 - total flux cleaned = -0.00577024 Jy ! Component: 3750 - total flux cleaned = -0.0057137 Jy ! Component: 3800 - total flux cleaned = -0.00559937 Jy ! Component: 3850 - total flux cleaned = -0.00554174 Jy ! Component: 3900 - total flux cleaned = -0.00548376 Jy ! Component: 3950 - total flux cleaned = -0.00539569 Jy ! Component: 4000 - total flux cleaned = -0.00530682 Jy ! Component: 4050 - total flux cleaned = -0.00521727 Jy ! Total flux subtracted in 4096 components = -0.00515679 Jy ! Clean residual min=-0.001754 max=0.002020 Jy/beam ! Clean residual mean=0.000002 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.181454 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 292 components and 0.181454 Jy ![Exited script file: muppet] wmap "J1458+0416_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.752 at -0.1921 degrees (North through East) ! Clean map min=-0.0045161 max=0.16455 Jy/beam ! Writing clean map to FITS file: J1458+0416_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164555 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000403325 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.735303 0.735303 1.47061 2.94121 5.88242 11.7648 23.5297 47.0594 94.1187 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 7.752 at -0.1921 degrees (North through East) ! Clean map min=-0.0045161 max=0.16455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1458+0416_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:56:47 2017