! Started logfile: J1457+0749_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:23 2017 obs J1457+0749_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1457+0749_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1457+0749 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1457+0749_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918746Jy sigma=0.013365 ! Fit after self-cal, rms=0.908937Jy sigma=0.013220 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=5.934 mas, bpa=-2.764 degrees ! Estimated noise=860.394 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702264 Jy ! Component: 100 - total flux cleaned = 0.0864069 Jy ! Total flux subtracted in 100 components = 0.0864069 Jy ! Clean residual min=-0.004348 max=0.006013 Jy/beam ! Clean residual mean=-0.000104 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.0864069 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0864069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069709Jy sigma=0.000912 ! Fit after self-cal, rms=0.069720Jy sigma=0.000912 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=6.806 mas, bpa=-4.41 degrees ! Estimated noise=708.794 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732714 Jy ! Component: 100 - total flux cleaned = 0.0108048 Jy ! Component: 150 - total flux cleaned = 0.0130383 Jy ! Component: 200 - total flux cleaned = 0.0145439 Jy ! Total flux subtracted in 200 components = 0.0145439 Jy ! Clean residual min=-0.003623 max=0.002976 Jy/beam ! Clean residual mean=-0.000080 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.100951 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 21 components and 0.100951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068765Jy sigma=0.000904 ! Fit after self-cal, rms=0.068722Jy sigma=0.000904 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.81 KP 1.00* LA 1.06 ! MK 0.92 NL 1.01 OV 1.01 PT 0.98 ! SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 KP 1.00* LA 0.99 ! MK 1.05 NL 1.03 OV 1.02 PT 0.95 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.17 KP 1.00* LA 0.78 ! MK 1.00 NL 0.95 OV 0.95 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.01 KP 1.00* LA 0.90 ! MK 1.07 NL 1.14 OV 1.00 PT 0.99 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.068722Jy sigma=0.000904 ! Fit after self-cal, rms=0.066573Jy sigma=0.000891 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=6.854 mas, bpa=-4.026 degrees ! Estimated noise=708.758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.08529e-06 Jy ! Component: 100 - total flux cleaned = 0.000103816 Jy ! Component: 150 - total flux cleaned = 7.46306e-05 Jy ! Component: 200 - total flux cleaned = 7.39597e-05 Jy ! Total flux subtracted in 200 components = 7.39597e-05 Jy ! Clean residual min=-0.002630 max=0.002751 Jy/beam ! Clean residual mean=-0.000054 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.101025 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.101025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066541Jy sigma=0.000891 ! Fit after self-cal, rms=0.066434Jy sigma=0.000890 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066434Jy sigma=0.000890 ! Fit after self-cal, rms=0.066383Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=6.834 mas, bpa=-4.112 degrees ! Estimated noise=708.436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240586 Jy ! Component: 100 - total flux cleaned = 0.000318968 Jy ! Component: 150 - total flux cleaned = 0.000336557 Jy ! Component: 200 - total flux cleaned = 0.000350599 Jy ! Total flux subtracted in 200 components = 0.000350599 Jy ! Clean residual min=-0.002060 max=0.002194 Jy/beam ! Clean residual mean=-0.000029 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.101375 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 36 components and 0.101375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066372Jy sigma=0.000888 ! Fit after self-cal, rms=0.066373Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.68764e-05 Jy ! Component: 100 - total flux cleaned = -1.28506e-05 Jy ! Component: 150 - total flux cleaned = -1.30067e-05 Jy ! Component: 200 - total flux cleaned = -1.44213e-06 Jy ! Total flux subtracted in 200 components = -1.44213e-06 Jy ! Clean residual min=-0.002044 max=0.002213 Jy/beam ! Clean residual mean=-0.000030 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.101374 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.101374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066368Jy sigma=0.000888 ! Fit after self-cal, rms=0.066371Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066371Jy sigma=0.000888 ! Fit after self-cal, rms=0.066163Jy sigma=0.000888 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=6.827 mas, bpa=-4.131 degrees ! Estimated noise=707.914 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229979 Jy ! Component: 100 - total flux cleaned = 0.000291016 Jy ! Component: 150 - total flux cleaned = 0.000303521 Jy ! Component: 200 - total flux cleaned = 0.000315217 Jy ! Total flux subtracted in 200 components = 0.000315217 Jy ! Clean residual min=-0.002039 max=0.002155 Jy/beam ! Clean residual mean=-0.000028 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.101689 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 43 components and 0.101689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066156Jy sigma=0.000887 ! Fit after self-cal, rms=0.066150Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.31151e-06 Jy ! Component: 100 - total flux cleaned = 8.07553e-06 Jy ! Component: 150 - total flux cleaned = 8.25055e-06 Jy ! Component: 200 - total flux cleaned = 8.15895e-06 Jy ! Total flux subtracted in 200 components = 8.15895e-06 Jy ! Clean residual min=-0.002025 max=0.002148 Jy/beam ! Clean residual mean=-0.000028 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.101697 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.101697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066146Jy sigma=0.000887 ! Fit after self-cal, rms=0.066149Jy sigma=0.000887 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066149Jy sigma=0.000887 ! Fit after self-cal, rms=0.065975Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.135 mas, bmaj=10.9 mas, bpa=8.308 degrees ! Estimated noise=858.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000695398 Jy ! Component: 100 - total flux cleaned = 0.000811156 Jy ! Component: 150 - total flux cleaned = 0.00091267 Jy ! Component: 200 - total flux cleaned = 0.00098101 Jy ! Total flux subtracted in 200 components = 0.00098101 Jy ! Clean residual min=-0.002337 max=0.002207 Jy/beam ! Clean residual mean=-0.000050 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.102678 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.102678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065981Jy sigma=0.000887 ! Fit after self-cal, rms=0.065950Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.06249e-05 Jy ! Component: 100 - total flux cleaned = 8.78582e-05 Jy ! Component: 150 - total flux cleaned = 0.000125243 Jy ! Component: 200 - total flux cleaned = 0.000159278 Jy ! Total flux subtracted in 200 components = 0.000159278 Jy ! Clean residual min=-0.002321 max=0.002178 Jy/beam ! Clean residual mean=-0.000050 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.102838 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.102838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065953Jy sigma=0.000887 ! Fit after self-cal, rms=0.065949Jy sigma=0.000887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=6.821 mas, bpa=-4.152 degrees ! Estimated noise=707.494 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.581 x 6.821 at -4.152 degrees (North through East) ! Clean map min=-0.0019107 max=0.089586 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.995 mas, bmaj=5.948 mas, bpa=-2.358 degrees ! Estimated noise=861.685 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703096 Jy ! Component: 100 - total flux cleaned = 0.0867784 Jy ! Component: 150 - total flux cleaned = 0.0931463 Jy ! Component: 200 - total flux cleaned = 0.0961265 Jy ! Total flux subtracted in 200 components = 0.0961265 Jy ! Clean residual min=-0.002909 max=0.002796 Jy/beam ! Clean residual mean=-0.000041 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0961265 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0961265 Jy ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=6.821 mas, bpa=-4.152 degrees ! Estimated noise=707.494 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224902 Jy ! Component: 100 - total flux cleaned = 0.0035388 Jy ! Component: 150 - total flux cleaned = 0.00399638 Jy ! Component: 200 - total flux cleaned = 0.00419801 Jy ! Total flux subtracted in 200 components = 0.00419801 Jy ! Clean residual min=-0.002239 max=0.002174 Jy/beam ! Clean residual mean=-0.000033 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.100325 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 34 components and 0.100325 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.135 mas, bmaj=10.9 mas, bpa=8.308 degrees ! Estimated noise=858.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128202 Jy ! Component: 100 - total flux cleaned = 0.00159937 Jy ! Component: 150 - total flux cleaned = 0.00176268 Jy ! Component: 200 - total flux cleaned = 0.00185928 Jy ! Total flux subtracted in 200 components = 0.00185928 Jy ! Clean residual min=-0.002346 max=0.002257 Jy/beam ! Clean residual mean=-0.000055 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.102184 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.51572e-05 Jy ! Component: 100 - total flux cleaned = 0.000148636 Jy ! Component: 150 - total flux cleaned = 0.000217573 Jy ! Component: 200 - total flux cleaned = 0.000269203 Jy ! Total flux subtracted in 200 components = 0.000269203 Jy ! Clean residual min=-0.002347 max=0.002203 Jy/beam ! Clean residual mean=-0.000053 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.102453 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.102453 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=6.821 mas, bpa=-4.152 degrees ! Estimated noise=707.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376966 Jy ! Component: 100 - total flux cleaned = -0.00046826 Jy ! Component: 150 - total flux cleaned = -0.00046838 Jy ! Component: 200 - total flux cleaned = -0.000487189 Jy ! Total flux subtracted in 200 components = -0.000487189 Jy ! Clean residual min=-0.002025 max=0.002164 Jy/beam ! Clean residual mean=-0.000027 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.101966 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.101966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065949Jy sigma=0.000888 ! Fit after self-cal, rms=0.065972Jy sigma=0.000888 wmodel J1457+0749_S_2014_01_04_pus_map.mod ! Writing 53 model components to file: J1457+0749_S_2014_01_04_pus_map.mod wobs J1457+0749_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1457+0749_S_2014_01_04_pus_uvs.fits wwins J1457+0749_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1457+0749_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565754 Jy ! Component: 100 - total flux cleaned = 0.000422876 Jy ! Component: 150 - total flux cleaned = 0.000186551 Jy ! Component: 200 - total flux cleaned = -3.80803e-05 Jy ! Component: 250 - total flux cleaned = -0.00025335 Jy ! Component: 300 - total flux cleaned = -0.000462041 Jy ! Component: 350 - total flux cleaned = -0.000634044 Jy ! Component: 400 - total flux cleaned = -0.000634828 Jy ! Component: 450 - total flux cleaned = -0.00071686 Jy ! Component: 500 - total flux cleaned = -0.000796129 Jy ! Component: 550 - total flux cleaned = -0.000847389 Jy ! Component: 600 - total flux cleaned = -0.000872359 Jy ! Component: 650 - total flux cleaned = -0.000848516 Jy ! Component: 700 - total flux cleaned = -0.000896238 Jy ! Component: 750 - total flux cleaned = -0.000896044 Jy ! Component: 800 - total flux cleaned = -0.00082763 Jy ! Component: 850 - total flux cleaned = -0.00082775 Jy ! Component: 900 - total flux cleaned = -0.000827634 Jy ! Component: 950 - total flux cleaned = -0.000762892 Jy ! Component: 1000 - total flux cleaned = -0.000763254 Jy ! Component: 1050 - total flux cleaned = -0.00078353 Jy ! Component: 1100 - total flux cleaned = -0.000782946 Jy ! Component: 1150 - total flux cleaned = -0.000782862 Jy ! Component: 1200 - total flux cleaned = -0.000763082 Jy ! Component: 1250 - total flux cleaned = -0.000781943 Jy ! Component: 1300 - total flux cleaned = -0.000781855 Jy ! Component: 1350 - total flux cleaned = -0.000837068 Jy ! Component: 1400 - total flux cleaned = -0.000782758 Jy ! Component: 1450 - total flux cleaned = -0.000800862 Jy ! Component: 1500 - total flux cleaned = -0.000783501 Jy ! Component: 1550 - total flux cleaned = -0.000748827 Jy ! Component: 1600 - total flux cleaned = -0.000714656 Jy ! Component: 1650 - total flux cleaned = -0.000647768 Jy ! Component: 1700 - total flux cleaned = -0.000631272 Jy ! Component: 1750 - total flux cleaned = -0.000566126 Jy ! Component: 1800 - total flux cleaned = -0.000550128 Jy ! Component: 1850 - total flux cleaned = -0.000502699 Jy ! Component: 1900 - total flux cleaned = -0.000502786 Jy ! Component: 1950 - total flux cleaned = -0.000502814 Jy ! Component: 2000 - total flux cleaned = -0.000487786 Jy ! Component: 2050 - total flux cleaned = -0.000517786 Jy ! Component: 2100 - total flux cleaned = -0.000443353 Jy ! Component: 2150 - total flux cleaned = -0.000457978 Jy ! Component: 2200 - total flux cleaned = -0.000486861 Jy ! Component: 2250 - total flux cleaned = -0.000429652 Jy ! Component: 2300 - total flux cleaned = -0.000444063 Jy ! Component: 2350 - total flux cleaned = -0.000486301 Jy ! Component: 2400 - total flux cleaned = -0.000500471 Jy ! Component: 2450 - total flux cleaned = -0.000555468 Jy ! Component: 2500 - total flux cleaned = -0.000596305 Jy ! Component: 2550 - total flux cleaned = -0.000677232 Jy ! Component: 2600 - total flux cleaned = -0.000743805 Jy ! Component: 2650 - total flux cleaned = -0.000809806 Jy ! Component: 2700 - total flux cleaned = -0.000848943 Jy ! Component: 2750 - total flux cleaned = -0.000926581 Jy ! Component: 2800 - total flux cleaned = -0.0010036 Jy ! Component: 2850 - total flux cleaned = -0.00097823 Jy ! Component: 2900 - total flux cleaned = -0.00107924 Jy ! Component: 2950 - total flux cleaned = -0.00111667 Jy ! Component: 3000 - total flux cleaned = -0.00114143 Jy ! Component: 3050 - total flux cleaned = -0.00119078 Jy ! Component: 3100 - total flux cleaned = -0.00126395 Jy ! Component: 3150 - total flux cleaned = -0.00128812 Jy ! Component: 3200 - total flux cleaned = -0.00130011 Jy ! Component: 3250 - total flux cleaned = -0.00133582 Jy ! Component: 3300 - total flux cleaned = -0.001383 Jy ! Component: 3350 - total flux cleaned = -0.00144154 Jy ! Component: 3400 - total flux cleaned = -0.00141836 Jy ! Component: 3450 - total flux cleaned = -0.00145301 Jy ! Component: 3500 - total flux cleaned = -0.00148742 Jy ! Component: 3550 - total flux cleaned = -0.00152136 Jy ! Component: 3600 - total flux cleaned = -0.0015214 Jy ! Component: 3650 - total flux cleaned = -0.00157753 Jy ! Component: 3700 - total flux cleaned = -0.00159971 Jy ! Component: 3750 - total flux cleaned = -0.00161083 Jy ! Component: 3800 - total flux cleaned = -0.00166572 Jy ! Component: 3850 - total flux cleaned = -0.00166571 Jy ! Component: 3900 - total flux cleaned = -0.00168753 Jy ! Component: 3950 - total flux cleaned = -0.00175216 Jy ! Component: 4000 - total flux cleaned = -0.00177354 Jy ! Component: 4050 - total flux cleaned = -0.00180546 Jy ! Total flux subtracted in 4096 components = -0.00184783 Jy ! Clean residual min=-0.000607 max=0.000671 Jy/beam ! Clean residual mean=-0.000009 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.100118 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 324 components and 0.100118 Jy ![Exited script file: muppet] wmap "J1457+0749_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.581 x 6.821 at -4.152 degrees (North through East) ! Clean map min=-0.0014481 max=0.089874 Jy/beam ! Writing clean map to FITS file: J1457+0749_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0898741 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180517 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.602567 0.602567 1.20513 2.41027 4.82054 9.64108 19.2822 38.5643 77.1286 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.581 x 6.821 at -4.152 degrees (North through East) ! Clean map min=-0.0014481 max=0.089874 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1457+0749_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:28 2017