! Started logfile: J1454-3400_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:27:57 2017 obs J1454-3400_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1454-3400_S_2015_01_23_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.837443 visibilities/baseline/integration-bin. ! Found source: J1454-3400 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 11004 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1454-3400_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862901Jy sigma=0.005973 ! Fit after self-cal, rms=0.827518Jy sigma=0.005757 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=7.905 mas, bpa=-0.466 degrees ! Estimated noise=1586.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141181 Jy ! Component: 100 - total flux cleaned = 0.209883 Jy ! Total flux subtracted in 100 components = 0.209883 Jy ! Clean residual min=-0.033148 max=0.059741 Jy/beam ! Clean residual mean=0.000083 rms=0.010105 Jy/beam ! Combined flux in latest and established models = 0.209883 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.209883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.281085Jy sigma=0.001634 ! Fit after self-cal, rms=0.280697Jy sigma=0.001633 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.648 mas, bpa=-1.832 degrees ! Estimated noise=1000.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10719 Jy ! Component: 100 - total flux cleaned = 0.172965 Jy ! Component: 150 - total flux cleaned = 0.215095 Jy ! Component: 200 - total flux cleaned = 0.242696 Jy ! Total flux subtracted in 200 components = 0.242696 Jy ! Clean residual min=-0.028256 max=0.045066 Jy/beam ! Clean residual mean=-0.000234 rms=0.007950 Jy/beam ! Combined flux in latest and established models = 0.452579 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 94 components and 0.452579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243594Jy sigma=0.001083 ! Fit after self-cal, rms=0.238753Jy sigma=0.001032 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.19 HN 1.39 KP 0.93 ! LA 0.93 MK 1.00 NL 1.38 OV 0.99 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.52 HN 1.78 KP 0.84 ! LA 0.92 MK 0.97 NL 1.53 OV 1.02 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.96 HN 1.58 KP 0.75 ! LA 0.75 MK 0.99 NL 1.45 OV 0.96 ! PT 0.90 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.53 HN 1.34 KP 0.68 ! LA 0.83 MK 0.97 NL 1.34 OV 1.02 ! PT 0.95 SC 0.95 ! ! ! Fit before self-cal, rms=0.238753Jy sigma=0.001032 ! Fit after self-cal, rms=0.365415Jy sigma=0.000866 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=8.563 mas, bpa=-1.323 degrees ! Estimated noise=1009.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00740466 Jy ! Component: 100 - total flux cleaned = 0.00547023 Jy ! Component: 150 - total flux cleaned = 0.00440229 Jy ! Component: 200 - total flux cleaned = 0.00345599 Jy ! Total flux subtracted in 200 components = 0.00345599 Jy ! Clean residual min=-0.011760 max=0.013965 Jy/beam ! Clean residual mean=-0.000035 rms=0.003684 Jy/beam ! Combined flux in latest and established models = 0.456035 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 0.456035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.364856Jy sigma=0.000855 ! Fit after self-cal, rms=0.366188Jy sigma=0.000852 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366188Jy sigma=0.000852 ! Fit after self-cal, rms=0.367309Jy sigma=0.000852 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=8.475 mas, bpa=-1.365 degrees ! Estimated noise=994.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391008 Jy ! Component: 100 - total flux cleaned = 0.00343611 Jy ! Component: 150 - total flux cleaned = 0.00322999 Jy ! Component: 200 - total flux cleaned = 0.00266444 Jy ! Total flux subtracted in 200 components = 0.00266444 Jy ! Clean residual min=-0.011241 max=0.013059 Jy/beam ! Clean residual mean=-0.000035 rms=0.003519 Jy/beam ! Combined flux in latest and established models = 0.458699 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 132 components and 0.458699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367071Jy sigma=0.000847 ! Fit after self-cal, rms=0.366982Jy sigma=0.000846 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104348 Jy ! Component: 100 - total flux cleaned = 0.000860503 Jy ! Component: 150 - total flux cleaned = 0.000526691 Jy ! Component: 200 - total flux cleaned = -8.81034e-05 Jy ! Total flux subtracted in 200 components = -8.81034e-05 Jy ! Clean residual min=-0.011101 max=0.012870 Jy/beam ! Clean residual mean=-0.000036 rms=0.003472 Jy/beam ! Combined flux in latest and established models = 0.458611 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.458611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366862Jy sigma=0.000843 ! Fit after self-cal, rms=0.366813Jy sigma=0.000842 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366813Jy sigma=0.000842 ! Fit after self-cal, rms=0.405579Jy sigma=0.000835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.948 mas, bmaj=8.472 mas, bpa=-1.482 degrees ! Estimated noise=996.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261646 Jy ! Component: 100 - total flux cleaned = 0.00262227 Jy ! Component: 150 - total flux cleaned = 0.00248606 Jy ! Component: 200 - total flux cleaned = 0.0023573 Jy ! Total flux subtracted in 200 components = 0.0023573 Jy ! Clean residual min=-0.010347 max=0.011793 Jy/beam ! Clean residual mean=-0.000023 rms=0.003267 Jy/beam ! Combined flux in latest and established models = 0.460968 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 150 components and 0.460968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405478Jy sigma=0.000833 ! Fit after self-cal, rms=0.405463Jy sigma=0.000832 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000660921 Jy ! Component: 100 - total flux cleaned = 0.000541326 Jy ! Component: 150 - total flux cleaned = 0.000433216 Jy ! Component: 200 - total flux cleaned = 0.000324973 Jy ! Total flux subtracted in 200 components = 0.000324973 Jy ! Clean residual min=-0.010102 max=0.011670 Jy/beam ! Clean residual mean=-0.000023 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.461293 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 157 components and 0.461293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405411Jy sigma=0.000831 ! Fit after self-cal, rms=0.405363Jy sigma=0.000831 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405363Jy sigma=0.000831 ! Fit after self-cal, rms=0.404533Jy sigma=0.000831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=22.85 mas, bpa=-0.4352 degrees ! Estimated noise=1290.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133063 Jy ! Component: 100 - total flux cleaned = 0.000832655 Jy ! Component: 150 - total flux cleaned = 0.000494694 Jy ! Component: 200 - total flux cleaned = 8.51464e-05 Jy ! Total flux subtracted in 200 components = 8.51464e-05 Jy ! Clean residual min=-0.016600 max=0.020028 Jy/beam ! Clean residual mean=-0.000068 rms=0.006087 Jy/beam ! Combined flux in latest and established models = 0.461378 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 163 components and 0.461378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404529Jy sigma=0.000831 ! Fit after self-cal, rms=0.404442Jy sigma=0.000830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188066 Jy ! Component: 100 - total flux cleaned = -0.000573337 Jy ! Component: 150 - total flux cleaned = -0.000934247 Jy ! Component: 200 - total flux cleaned = -0.00118756 Jy ! Total flux subtracted in 200 components = -0.00118756 Jy ! Clean residual min=-0.016424 max=0.019777 Jy/beam ! Clean residual mean=-0.000074 rms=0.006060 Jy/beam ! Combined flux in latest and established models = 0.460191 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 172 components and 0.460191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404472Jy sigma=0.000831 ! Fit after self-cal, rms=0.404438Jy sigma=0.000831 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.472 mas, bpa=-1.594 degrees ! Estimated noise=995.527 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 8.472 at -1.594 degrees (North through East) ! Clean map min=-0.010465 max=0.14782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=7.7 mas, bpa=0.2324 degrees ! Estimated noise=1605.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144506 Jy ! Component: 100 - total flux cleaned = 0.231638 Jy ! Component: 150 - total flux cleaned = 0.293625 Jy ! Component: 200 - total flux cleaned = 0.33852 Jy ! Total flux subtracted in 200 components = 0.33852 Jy ! Clean residual min=-0.020106 max=0.025437 Jy/beam ! Clean residual mean=0.000049 rms=0.005525 Jy/beam ! Combined flux in latest and established models = 0.33852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 62 model components to the UV plane model. ! The established model now contains 62 components and 0.33852 Jy ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.472 mas, bpa=-1.594 degrees ! Estimated noise=995.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510628 Jy ! Component: 100 - total flux cleaned = 0.081022 Jy ! Component: 150 - total flux cleaned = 0.0991872 Jy ! Component: 200 - total flux cleaned = 0.110349 Jy ! Total flux subtracted in 200 components = 0.110349 Jy ! Clean residual min=-0.011919 max=0.010901 Jy/beam ! Clean residual mean=-0.000035 rms=0.003345 Jy/beam ! Combined flux in latest and established models = 0.44887 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 116 components and 0.44887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=22.85 mas, bpa=-0.4352 degrees ! Estimated noise=1290.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769471 Jy ! Component: 100 - total flux cleaned = 0.00858526 Jy ! Component: 150 - total flux cleaned = 0.00920475 Jy ! Component: 200 - total flux cleaned = 0.0093636 Jy ! Total flux subtracted in 200 components = 0.0093636 Jy ! Clean residual min=-0.017979 max=0.020315 Jy/beam ! Clean residual mean=-0.000072 rms=0.005941 Jy/beam ! Combined flux in latest and established models = 0.458233 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.86395e-06 Jy ! Component: 100 - total flux cleaned = -5.13767e-06 Jy ! Component: 150 - total flux cleaned = -1.38362e-05 Jy ! Component: 200 - total flux cleaned = -0.000114606 Jy ! Total flux subtracted in 200 components = -0.000114606 Jy ! Clean residual min=-0.017662 max=0.019860 Jy/beam ! Clean residual mean=-0.000078 rms=0.005944 Jy/beam ! Combined flux in latest and established models = 0.458119 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 135 components and 0.458119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=8.472 mas, bpa=-1.594 degrees ! Estimated noise=995.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00255781 Jy ! Component: 100 - total flux cleaned = 0.00108653 Jy ! Component: 150 - total flux cleaned = 0.000683359 Jy ! Component: 200 - total flux cleaned = 0.000446907 Jy ! Total flux subtracted in 200 components = 0.000446907 Jy ! Clean residual min=-0.011880 max=0.011081 Jy/beam ! Clean residual mean=-0.000035 rms=0.003205 Jy/beam ! Combined flux in latest and established models = 0.458566 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 0.458566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.404560Jy sigma=0.000832 ! Fit after self-cal, rms=0.404480Jy sigma=0.000830 wmodel J1454-3400_S_2015_01_23_pus_map.mod ! Writing 147 model components to file: J1454-3400_S_2015_01_23_pus_map.mod wobs J1454-3400_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1454-3400_S_2015_01_23_pus_uvs.fits wwins J1454-3400_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1454-3400_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328083 Jy ! Component: 100 - total flux cleaned = 0.0041916 Jy ! Component: 150 - total flux cleaned = 0.00519458 Jy ! Component: 200 - total flux cleaned = 0.00612879 Jy ! Component: 250 - total flux cleaned = 0.00745627 Jy ! Component: 300 - total flux cleaned = 0.00857823 Jy ! Component: 350 - total flux cleaned = 0.00977841 Jy ! Component: 400 - total flux cleaned = 0.0107974 Jy ! Component: 450 - total flux cleaned = 0.0120269 Jy ! Component: 500 - total flux cleaned = 0.0134423 Jy ! Component: 550 - total flux cleaned = 0.0143528 Jy ! Component: 600 - total flux cleaned = 0.0149062 Jy ! Component: 650 - total flux cleaned = 0.015335 Jy ! Component: 700 - total flux cleaned = 0.0160586 Jy ! Component: 750 - total flux cleaned = 0.0168585 Jy ! Component: 800 - total flux cleaned = 0.0172455 Jy ! Component: 850 - total flux cleaned = 0.0179995 Jy ! Component: 900 - total flux cleaned = 0.0185489 Jy ! Component: 950 - total flux cleaned = 0.0189029 Jy ! Component: 1000 - total flux cleaned = 0.019163 Jy ! Component: 1050 - total flux cleaned = 0.0196745 Jy ! Component: 1100 - total flux cleaned = 0.0200078 Jy ! Component: 1150 - total flux cleaned = 0.0202514 Jy ! Component: 1200 - total flux cleaned = 0.0206513 Jy ! Component: 1250 - total flux cleaned = 0.0209627 Jy ! Component: 1300 - total flux cleaned = 0.0213451 Jy ! Component: 1350 - total flux cleaned = 0.0217187 Jy ! Component: 1400 - total flux cleaned = 0.0219399 Jy ! Component: 1450 - total flux cleaned = 0.0225132 Jy ! Component: 1500 - total flux cleaned = 0.0230073 Jy ! Component: 1550 - total flux cleaned = 0.0236972 Jy ! Component: 1600 - total flux cleaned = 0.0239015 Jy ! Component: 1650 - total flux cleaned = 0.0245031 Jy ! Component: 1700 - total flux cleaned = 0.0250281 Jy ! Component: 1750 - total flux cleaned = 0.0258011 Jy ! Component: 1800 - total flux cleaned = 0.0261175 Jy ! Component: 1850 - total flux cleaned = 0.0265542 Jy ! Component: 1900 - total flux cleaned = 0.027169 Jy ! Component: 1950 - total flux cleaned = 0.0277131 Jy ! Component: 2000 - total flux cleaned = 0.0280122 Jy ! Component: 2050 - total flux cleaned = 0.0287164 Jy ! Component: 2100 - total flux cleaned = 0.0290058 Jy ! Component: 2150 - total flux cleaned = 0.0295202 Jy ! Component: 2200 - total flux cleaned = 0.0300829 Jy ! Component: 2250 - total flux cleaned = 0.0304729 Jy ! Component: 2300 - total flux cleaned = 0.0310224 Jy ! Component: 2350 - total flux cleaned = 0.0316717 Jy ! Component: 2400 - total flux cleaned = 0.0320988 Jy ! Component: 2450 - total flux cleaned = 0.0326794 Jy ! Component: 2500 - total flux cleaned = 0.0330973 Jy ! Component: 2550 - total flux cleaned = 0.0336649 Jy ! Component: 2600 - total flux cleaned = 0.0340225 Jy ! Component: 2650 - total flux cleaned = 0.0345777 Jy ! Component: 2700 - total flux cleaned = 0.0349274 Jy ! Component: 2750 - total flux cleaned = 0.0355199 Jy ! Component: 2800 - total flux cleaned = 0.0359098 Jy ! Component: 2850 - total flux cleaned = 0.0362487 Jy ! Component: 2900 - total flux cleaned = 0.036728 Jy ! Component: 2950 - total flux cleaned = 0.0372014 Jy ! Component: 3000 - total flux cleaned = 0.0376702 Jy ! Component: 3050 - total flux cleaned = 0.0380884 Jy ! Component: 3100 - total flux cleaned = 0.0384561 Jy ! Component: 3150 - total flux cleaned = 0.039048 Jy ! Component: 3200 - total flux cleaned = 0.0394085 Jy ! Component: 3250 - total flux cleaned = 0.0397657 Jy ! Component: 3300 - total flux cleaned = 0.0400757 Jy ! Component: 3350 - total flux cleaned = 0.0405588 Jy ! Component: 3400 - total flux cleaned = 0.0409071 Jy ! Component: 3450 - total flux cleaned = 0.0412527 Jy ! Component: 3500 - total flux cleaned = 0.0415096 Jy ! Component: 3550 - total flux cleaned = 0.041892 Jy ! Component: 3600 - total flux cleaned = 0.0421445 Jy ! Component: 3650 - total flux cleaned = 0.0424786 Jy ! Component: 3700 - total flux cleaned = 0.0427688 Jy ! Component: 3750 - total flux cleaned = 0.0429745 Jy ! Component: 3800 - total flux cleaned = 0.0432605 Jy ! Component: 3850 - total flux cleaned = 0.0434634 Jy ! Component: 3900 - total flux cleaned = 0.0437052 Jy ! Component: 3950 - total flux cleaned = 0.0439053 Jy ! Component: 4000 - total flux cleaned = 0.044104 Jy ! Component: 4050 - total flux cleaned = 0.0442227 Jy ! Total flux subtracted in 4096 components = 0.0445362 Jy ! Clean residual min=-0.002799 max=0.002190 Jy/beam ! Clean residual mean=-0.000029 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.503102 Jy keep ! Adding 507 model components to the UV plane model. ! The established model now contains 654 components and 0.503102 Jy ![Exited script file: muppet] wmap "J1454-3400_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 8.472 at -1.594 degrees (North through East) ! Clean map min=-0.010118 max=0.15128 Jy/beam ! Writing clean map to FITS file: J1454-3400_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.15128 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000866518 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.71838 1.71838 3.43675 6.8735 13.747 27.494 54.988 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.151 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.949 x 8.472 at -1.594 degrees (North through East) ! Clean map min=-0.010118 max=0.15128 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1454-3400_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:28:01 2017