! Started logfile: J1453+3505_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:17 2017 obs J1453+3505_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1453+3505_S_2014_01_04_pus_uva.fits ! AN table 1: 112 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.590774 visibilities/baseline/integration-bin. ! Found source: J1453+3505 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1453+3505_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862269Jy sigma=0.012822 ! Fit after self-cal, rms=0.802015Jy sigma=0.011650 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=4.339 mas, bpa=43.17 degrees ! Estimated noise=949.114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150997 Jy ! Component: 100 - total flux cleaned = 0.184483 Jy ! Total flux subtracted in 100 components = 0.184483 Jy ! Clean residual min=-0.007052 max=0.010855 Jy/beam ! Clean residual mean=-0.000011 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.184483 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.184483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074261Jy sigma=0.000942 ! Fit after self-cal, rms=0.074254Jy sigma=0.000942 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.633 mas, bmaj=5.049 mas, bpa=48.05 degrees ! Estimated noise=535.736 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013423 Jy ! Component: 100 - total flux cleaned = 0.0206284 Jy ! Component: 150 - total flux cleaned = 0.0252368 Jy ! Component: 200 - total flux cleaned = 0.0282161 Jy ! Total flux subtracted in 200 components = 0.0282161 Jy ! Clean residual min=-0.005288 max=0.006127 Jy/beam ! Clean residual mean=-0.000008 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.212699 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.212699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070949Jy sigma=0.000916 ! Fit after self-cal, rms=0.070862Jy sigma=0.000916 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.82 KP 1.00* LA 1.02 ! MK 0.98 NL 0.98 OV 0.95 PT 1.01 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 KP 1.00* LA 1.00 ! MK 0.99 NL 1.05 OV 0.98 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.13 KP 1.00* LA 0.80 ! MK 1.04 NL 1.01 OV 0.92 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.99 KP 1.00* LA 0.88 ! MK 1.03 NL 1.07 OV 1.00 PT 1.01 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.070862Jy sigma=0.000916 ! Fit after self-cal, rms=0.066053Jy sigma=0.000863 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.634 mas, bmaj=5.092 mas, bpa=44.77 degrees ! Estimated noise=538.199 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104291 Jy ! Component: 100 - total flux cleaned = -0.00123341 Jy ! Component: 150 - total flux cleaned = -0.0014103 Jy ! Component: 200 - total flux cleaned = -0.00157544 Jy ! Total flux subtracted in 200 components = -0.00157544 Jy ! Clean residual min=-0.002310 max=0.001962 Jy/beam ! Clean residual mean=-0.000009 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.211123 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.211123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066005Jy sigma=0.000862 ! Fit after self-cal, rms=0.065762Jy sigma=0.000862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065762Jy sigma=0.000862 ! Fit after self-cal, rms=0.065751Jy sigma=0.000861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.636 mas, bmaj=5.088 mas, bpa=45.07 degrees ! Estimated noise=537.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000694631 Jy ! Component: 100 - total flux cleaned = -0.000795429 Jy ! Component: 150 - total flux cleaned = -0.000951277 Jy ! Component: 200 - total flux cleaned = -0.00106801 Jy ! Total flux subtracted in 200 components = -0.00106801 Jy ! Clean residual min=-0.002109 max=0.001847 Jy/beam ! Clean residual mean=0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.210055 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.210055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065706Jy sigma=0.000860 ! Fit after self-cal, rms=0.065704Jy sigma=0.000860 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012508 Jy ! Component: 100 - total flux cleaned = -0.000254633 Jy ! Component: 150 - total flux cleaned = -0.0003537 Jy ! Component: 200 - total flux cleaned = -0.000470341 Jy ! Total flux subtracted in 200 components = -0.000470341 Jy ! Clean residual min=-0.001920 max=0.001832 Jy/beam ! Clean residual mean=0.000000 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.209585 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.209585 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065682Jy sigma=0.000860 ! Fit after self-cal, rms=0.065684Jy sigma=0.000860 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065684Jy sigma=0.000860 ! Fit after self-cal, rms=0.065693Jy sigma=0.000860 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.637 mas, bmaj=5.079 mas, bpa=45.34 degrees ! Estimated noise=536.965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522825 Jy ! Component: 100 - total flux cleaned = -0.000625543 Jy ! Component: 150 - total flux cleaned = -0.000721455 Jy ! Component: 200 - total flux cleaned = -0.000835003 Jy ! Total flux subtracted in 200 components = -0.000835003 Jy ! Clean residual min=-0.001732 max=0.001844 Jy/beam ! Clean residual mean=0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.20875 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.20875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065667Jy sigma=0.000860 ! Fit after self-cal, rms=0.065664Jy sigma=0.000860 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-65, 94.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124427 Jy ! Component: 100 - total flux cleaned = 0.00135277 Jy ! Component: 150 - total flux cleaned = 0.00144642 Jy ! Component: 200 - total flux cleaned = 0.00147256 Jy ! Total flux subtracted in 200 components = 0.00147256 Jy ! Clean residual min=-0.001576 max=0.001371 Jy/beam ! Clean residual mean=0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.210222 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.210222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065603Jy sigma=0.000859 ! Fit after self-cal, rms=0.065604Jy sigma=0.000859 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065604Jy sigma=0.000859 ! Fit after self-cal, rms=0.065563Jy sigma=0.000859 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.628 mas, bmaj=9.645 mas, bpa=48.31 degrees ! Estimated noise=613.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001189 Jy ! Component: 100 - total flux cleaned = 0.000181139 Jy ! Component: 150 - total flux cleaned = 0.000165941 Jy ! Component: 200 - total flux cleaned = 0.000125866 Jy ! Total flux subtracted in 200 components = 0.000125866 Jy ! Clean residual min=-0.001467 max=0.001322 Jy/beam ! Clean residual mean=0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.210348 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.210348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065554Jy sigma=0.000859 ! Fit after self-cal, rms=0.065553Jy sigma=0.000859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.8155e-05 Jy ! Component: 100 - total flux cleaned = -7.12395e-05 Jy ! Component: 150 - total flux cleaned = -9.35e-05 Jy ! Component: 200 - total flux cleaned = -0.00011347 Jy ! Total flux subtracted in 200 components = -0.00011347 Jy ! Clean residual min=-0.001421 max=0.001364 Jy/beam ! Clean residual mean=0.000002 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.210235 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.210235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065549Jy sigma=0.000859 ! Fit after self-cal, rms=0.065551Jy sigma=0.000859 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.639 mas, bmaj=5.074 mas, bpa=45.41 degrees ! Estimated noise=536.427 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.639 x 5.074 at 45.41 degrees (North through East) ! Clean map min=-0.0014174 max=0.19209 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=4.346 mas, bpa=41.92 degrees ! Estimated noise=964.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.153444 Jy ! Component: 100 - total flux cleaned = 0.187486 Jy ! Component: 150 - total flux cleaned = 0.197628 Jy ! Component: 200 - total flux cleaned = 0.200993 Jy ! Total flux subtracted in 200 components = 0.200993 Jy ! Clean residual min=-0.003351 max=0.003277 Jy/beam ! Clean residual mean=-0.000001 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.200993 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.200993 Jy ! Inverting map and beam ! Estimated beam: bmin=4.639 mas, bmaj=5.074 mas, bpa=45.41 degrees ! Estimated noise=536.427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268595 Jy ! Component: 100 - total flux cleaned = 0.00414721 Jy ! Component: 150 - total flux cleaned = 0.00497744 Jy ! Component: 200 - total flux cleaned = 0.00554697 Jy ! Total flux subtracted in 200 components = 0.00554697 Jy ! Clean residual min=-0.001512 max=0.001578 Jy/beam ! Clean residual mean=0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.20654 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 31 components and 0.20654 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.628 mas, bmaj=9.645 mas, bpa=48.31 degrees ! Estimated noise=613.855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000961839 Jy ! Component: 100 - total flux cleaned = 0.00141651 Jy ! Component: 150 - total flux cleaned = 0.00177935 Jy ! Component: 200 - total flux cleaned = 0.00197854 Jy ! Total flux subtracted in 200 components = 0.00197854 Jy ! Clean residual min=-0.001255 max=0.001429 Jy/beam ! Clean residual mean=0.000002 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.208518 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013586 Jy ! Component: 100 - total flux cleaned = 0.000224848 Jy ! Component: 150 - total flux cleaned = 0.000306101 Jy ! Component: 200 - total flux cleaned = 0.000392276 Jy ! Total flux subtracted in 200 components = 0.000392276 Jy ! Clean residual min=-0.001246 max=0.001368 Jy/beam ! Clean residual mean=0.000002 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.208911 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 74 components and 0.208911 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.639 mas, bmaj=5.074 mas, bpa=45.41 degrees ! Estimated noise=536.427 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103551 Jy ! Component: 100 - total flux cleaned = -0.000160069 Jy ! Component: 150 - total flux cleaned = -0.000237973 Jy ! Component: 200 - total flux cleaned = -0.000213402 Jy ! Total flux subtracted in 200 components = -0.000213402 Jy ! Clean residual min=-0.001266 max=0.001398 Jy/beam ! Clean residual mean=0.000000 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.208697 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 0.208697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065518Jy sigma=0.000859 ! Fit after self-cal, rms=0.065527Jy sigma=0.000859 wmodel J1453+3505_S_2014_01_04_pus_map.mod ! Writing 90 model components to file: J1453+3505_S_2014_01_04_pus_map.mod wobs J1453+3505_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1453+3505_S_2014_01_04_pus_uvs.fits wwins J1453+3505_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1453+3505_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155937 Jy ! Component: 100 - total flux cleaned = 0.00024928 Jy ! Component: 150 - total flux cleaned = 0.000380593 Jy ! Component: 200 - total flux cleaned = 0.000443702 Jy ! Component: 250 - total flux cleaned = 0.000584234 Jy ! Component: 300 - total flux cleaned = 0.00066175 Jy ! Component: 350 - total flux cleaned = 0.000775129 Jy ! Component: 400 - total flux cleaned = 0.000884847 Jy ! Component: 450 - total flux cleaned = 0.000920773 Jy ! Component: 500 - total flux cleaned = 0.00095594 Jy ! Component: 550 - total flux cleaned = 0.000989209 Jy ! Component: 600 - total flux cleaned = 0.0010221 Jy ! Component: 650 - total flux cleaned = 0.00110262 Jy ! Component: 700 - total flux cleaned = 0.00119731 Jy ! Component: 750 - total flux cleaned = 0.00127407 Jy ! Component: 800 - total flux cleaned = 0.0012738 Jy ! Component: 850 - total flux cleaned = 0.00133319 Jy ! Component: 900 - total flux cleaned = 0.00137687 Jy ! Component: 950 - total flux cleaned = 0.0014484 Jy ! Component: 1000 - total flux cleaned = 0.00149056 Jy ! Component: 1050 - total flux cleaned = 0.00154559 Jy ! Component: 1100 - total flux cleaned = 0.0015592 Jy ! Component: 1150 - total flux cleaned = 0.00158604 Jy ! Component: 1200 - total flux cleaned = 0.00161248 Jy ! Component: 1250 - total flux cleaned = 0.0016255 Jy ! Component: 1300 - total flux cleaned = 0.00162559 Jy ! Component: 1350 - total flux cleaned = 0.00165049 Jy ! Component: 1400 - total flux cleaned = 0.00158872 Jy ! Component: 1450 - total flux cleaned = 0.00158882 Jy ! Component: 1500 - total flux cleaned = 0.00158888 Jy ! Component: 1550 - total flux cleaned = 0.00158875 Jy ! Component: 1600 - total flux cleaned = 0.00150756 Jy ! Component: 1650 - total flux cleaned = 0.00150771 Jy ! Component: 1700 - total flux cleaned = 0.00150755 Jy ! Component: 1750 - total flux cleaned = 0.00147403 Jy ! Component: 1800 - total flux cleaned = 0.0014631 Jy ! Component: 1850 - total flux cleaned = 0.00144142 Jy ! Component: 1900 - total flux cleaned = 0.00148435 Jy ! Component: 1950 - total flux cleaned = 0.00145264 Jy ! Component: 2000 - total flux cleaned = 0.0014945 Jy ! Component: 2050 - total flux cleaned = 0.0014841 Jy ! Component: 2100 - total flux cleaned = 0.00153529 Jy ! Component: 2150 - total flux cleaned = 0.00152512 Jy ! Component: 2200 - total flux cleaned = 0.00153514 Jy ! Component: 2250 - total flux cleaned = 0.00154511 Jy ! Component: 2300 - total flux cleaned = 0.00157478 Jy ! Component: 2350 - total flux cleaned = 0.00155532 Jy ! Component: 2400 - total flux cleaned = 0.00158428 Jy ! Component: 2450 - total flux cleaned = 0.00160349 Jy ! Component: 2500 - total flux cleaned = 0.00159383 Jy ! Component: 2550 - total flux cleaned = 0.00159378 Jy ! Component: 2600 - total flux cleaned = 0.00164045 Jy ! Component: 2650 - total flux cleaned = 0.00158464 Jy ! Component: 2700 - total flux cleaned = 0.0015846 Jy ! Component: 2750 - total flux cleaned = 0.00158449 Jy ! Component: 2800 - total flux cleaned = 0.00157547 Jy ! Component: 2850 - total flux cleaned = 0.00158448 Jy ! Component: 2900 - total flux cleaned = 0.00155753 Jy ! Component: 2950 - total flux cleaned = 0.00157538 Jy ! Component: 3000 - total flux cleaned = 0.00156648 Jy ! Component: 3050 - total flux cleaned = 0.00155782 Jy ! Component: 3100 - total flux cleaned = 0.00155786 Jy ! Component: 3150 - total flux cleaned = 0.00155786 Jy ! Component: 3200 - total flux cleaned = 0.00159238 Jy ! Component: 3250 - total flux cleaned = 0.00155802 Jy ! Component: 3300 - total flux cleaned = 0.00159211 Jy ! Component: 3350 - total flux cleaned = 0.00157511 Jy ! Component: 3400 - total flux cleaned = 0.00159204 Jy ! Component: 3450 - total flux cleaned = 0.00160885 Jy ! Component: 3500 - total flux cleaned = 0.00161718 Jy ! Component: 3550 - total flux cleaned = 0.00162551 Jy ! Component: 3600 - total flux cleaned = 0.00161718 Jy ! Component: 3650 - total flux cleaned = 0.00163361 Jy ! Component: 3700 - total flux cleaned = 0.00163364 Jy ! Component: 3750 - total flux cleaned = 0.00161731 Jy ! Component: 3800 - total flux cleaned = 0.00162548 Jy ! Component: 3850 - total flux cleaned = 0.0016174 Jy ! Component: 3900 - total flux cleaned = 0.00163349 Jy ! Component: 3950 - total flux cleaned = 0.00158545 Jy ! Component: 4000 - total flux cleaned = 0.00163333 Jy ! Component: 4050 - total flux cleaned = 0.00161745 Jy ! Total flux subtracted in 4096 components = 0.00165706 Jy ! Clean residual min=-0.000575 max=0.000522 Jy/beam ! Clean residual mean=-0.000001 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.210354 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 347 components and 0.210354 Jy ![Exited script file: muppet] wmap "J1453+3505_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.639 x 5.074 at 45.41 degrees (North through East) ! Clean map min=-0.00103 max=0.19493 Jy/beam ! Writing clean map to FITS file: J1453+3505_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.194932 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130434 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.200737 0.200737 0.401474 0.802948 1.6059 3.21179 6.42359 12.8472 25.6943 51.3887 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.194 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.639 x 5.074 at 45.41 degrees (North through East) ! Clean map min=-0.00103 max=0.19493 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1453+3505_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:23 2017