! Started logfile: J1451-0127_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:56:37 2017 obs J1451-0127_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1451-0127_S_2015_01_22_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1451-0127 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 10944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1451-0127_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.868614Jy sigma=0.009780 ! Fit after self-cal, rms=0.860937Jy sigma=0.009695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.623 mas, bmaj=6.415 mas, bpa=-3.034 degrees ! Estimated noise=765.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108304 Jy ! Component: 100 - total flux cleaned = 0.139247 Jy ! Total flux subtracted in 100 components = 0.139247 Jy ! Clean residual min=-0.012349 max=0.014741 Jy/beam ! Clean residual mean=0.000036 rms=0.003146 Jy/beam ! Combined flux in latest and established models = 0.139247 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.139247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091045Jy sigma=0.000945 ! Fit after self-cal, rms=0.091021Jy sigma=0.000945 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.068 mas, bmaj=7.268 mas, bpa=-3.638 degrees ! Estimated noise=613.169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152062 Jy ! Component: 100 - total flux cleaned = 0.0219929 Jy ! Component: 150 - total flux cleaned = 0.024802 Jy ! Component: 200 - total flux cleaned = 0.0247991 Jy ! Total flux subtracted in 200 components = 0.0247991 Jy ! Clean residual min=-0.010681 max=0.016905 Jy/beam ! Clean residual mean=0.000027 rms=0.003252 Jy/beam ! Combined flux in latest and established models = 0.164046 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.164046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088803Jy sigma=0.000918 ! Fit after self-cal, rms=0.088783Jy sigma=0.000918 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 0.91 KP 1.01 ! LA 1.40 MK 1.04 NL 1.28 OV 0.93 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.01 KP 0.91 ! LA 1.34 MK 1.04 NL 1.35 OV 0.96 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 1.03 KP 0.81 ! LA 1.01 MK 1.07 NL 1.24 OV 0.89 ! PT 0.93 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.95 KP 0.77 ! LA 1.15 MK 1.07 NL 1.01 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.088783Jy sigma=0.000918 ! Fit after self-cal, rms=0.089237Jy sigma=0.000865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.264 mas, bpa=-3.037 degrees ! Estimated noise=615.228 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164684 Jy ! Component: 100 - total flux cleaned = 0.0253803 Jy ! Component: 150 - total flux cleaned = 0.0311714 Jy ! Component: 200 - total flux cleaned = 0.0335465 Jy ! Total flux subtracted in 200 components = 0.0335465 Jy ! Clean residual min=-0.006089 max=0.007601 Jy/beam ! Clean residual mean=0.000018 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.197592 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 71 components and 0.197593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086093Jy sigma=0.000819 ! Fit after self-cal, rms=0.086038Jy sigma=0.000816 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086038Jy sigma=0.000816 ! Fit after self-cal, rms=0.085991Jy sigma=0.000790 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.116 mas, bmaj=7.291 mas, bpa=-3.039 degrees ! Estimated noise=605.023 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00469571 Jy ! Component: 100 - total flux cleaned = 0.00743026 Jy ! Component: 150 - total flux cleaned = 0.00852772 Jy ! Component: 200 - total flux cleaned = 0.00891372 Jy ! Total flux subtracted in 200 components = 0.00891372 Jy ! Clean residual min=-0.003583 max=0.004457 Jy/beam ! Clean residual mean=-0.000004 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.206506 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 96 components and 0.206506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085733Jy sigma=0.000785 ! Fit after self-cal, rms=0.085801Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (46.5, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389454 Jy ! Component: 100 - total flux cleaned = 0.00591363 Jy ! Component: 150 - total flux cleaned = 0.00696511 Jy ! Component: 200 - total flux cleaned = 0.00778411 Jy ! Total flux subtracted in 200 components = 0.00778411 Jy ! Clean residual min=-0.003295 max=0.004009 Jy/beam ! Clean residual mean=-0.000003 rms=0.000836 Jy/beam ! Combined flux in latest and established models = 0.21429 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 128 components and 0.21429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085617Jy sigma=0.000782 ! Fit after self-cal, rms=0.085600Jy sigma=0.000782 ! Inverting map ! Added new window around map position (24, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335828 Jy ! Component: 100 - total flux cleaned = 0.00519252 Jy ! Component: 150 - total flux cleaned = 0.00639064 Jy ! Component: 200 - total flux cleaned = 0.00744951 Jy ! Total flux subtracted in 200 components = 0.00744951 Jy ! Clean residual min=-0.003170 max=0.003058 Jy/beam ! Clean residual mean=-0.000002 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.22174 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 157 components and 0.22174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085432Jy sigma=0.000779 ! Fit after self-cal, rms=0.085423Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085423Jy sigma=0.000779 ! Fit after self-cal, rms=0.085713Jy sigma=0.000779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.312 mas, bpa=-3.068 degrees ! Estimated noise=602.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141748 Jy ! Component: 100 - total flux cleaned = 0.0020943 Jy ! Component: 150 - total flux cleaned = 0.00246832 Jy ! Component: 200 - total flux cleaned = 0.00276753 Jy ! Total flux subtracted in 200 components = 0.00276753 Jy ! Clean residual min=-0.002976 max=0.002821 Jy/beam ! Clean residual mean=-0.000003 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.224507 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 177 components and 0.224507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085664Jy sigma=0.000778 ! Fit after self-cal, rms=0.085669Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000717515 Jy ! Component: 100 - total flux cleaned = 0.00107825 Jy ! Component: 150 - total flux cleaned = 0.00122848 Jy ! Component: 200 - total flux cleaned = 0.00147687 Jy ! Total flux subtracted in 200 components = 0.00147687 Jy ! Clean residual min=-0.002915 max=0.002719 Jy/beam ! Clean residual mean=-0.000003 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.225984 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 189 components and 0.225984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085641Jy sigma=0.000778 ! Fit after self-cal, rms=0.085638Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085638Jy sigma=0.000778 ! Fit after self-cal, rms=0.085700Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.119 mas, bmaj=11.9 mas, bpa=-1.065 degrees ! Estimated noise=772.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220467 Jy ! Component: 100 - total flux cleaned = 0.00346794 Jy ! Component: 150 - total flux cleaned = 0.00422046 Jy ! Component: 200 - total flux cleaned = 0.00455274 Jy ! Total flux subtracted in 200 components = 0.00455274 Jy ! Clean residual min=-0.003912 max=0.003621 Jy/beam ! Clean residual mean=-0.000008 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.230537 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 211 components and 0.230537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085702Jy sigma=0.000777 ! Fit after self-cal, rms=0.085697Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115716 Jy ! Component: 100 - total flux cleaned = 0.00153466 Jy ! Component: 150 - total flux cleaned = 0.00186304 Jy ! Component: 200 - total flux cleaned = 0.00210115 Jy ! Total flux subtracted in 200 components = 0.00210115 Jy ! Clean residual min=-0.003798 max=0.003436 Jy/beam ! Clean residual mean=-0.000008 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.232638 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 227 components and 0.232638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085705Jy sigma=0.000777 ! Fit after self-cal, rms=0.085699Jy sigma=0.000777 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.32 mas, bpa=-3.104 degrees ! Estimated noise=602.125 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.32 at -3.104 degrees (North through East) ! Clean map min=-0.0026213 max=0.1424 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=6.462 mas, bpa=-2.327 degrees ! Estimated noise=750.323 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105924 Jy ! Component: 100 - total flux cleaned = 0.134635 Jy ! Component: 150 - total flux cleaned = 0.150416 Jy ! Component: 200 - total flux cleaned = 0.161814 Jy ! Total flux subtracted in 200 components = 0.161814 Jy ! Clean residual min=-0.005082 max=0.006696 Jy/beam ! Clean residual mean=0.000007 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.161814 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.161814 Jy ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.32 mas, bpa=-3.104 degrees ! Estimated noise=602.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111624 Jy ! Component: 100 - total flux cleaned = 0.0195115 Jy ! Component: 150 - total flux cleaned = 0.0262293 Jy ! Component: 200 - total flux cleaned = 0.0317397 Jy ! Total flux subtracted in 200 components = 0.0317397 Jy ! Clean residual min=-0.003973 max=0.004338 Jy/beam ! Clean residual mean=-0.000003 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.193553 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 57 components and 0.193553 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.119 mas, bmaj=11.9 mas, bpa=-1.065 degrees ! Estimated noise=772.472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00836811 Jy ! Component: 100 - total flux cleaned = 0.0144689 Jy ! Component: 150 - total flux cleaned = 0.0191968 Jy ! Component: 200 - total flux cleaned = 0.0229701 Jy ! Total flux subtracted in 200 components = 0.0229701 Jy ! Clean residual min=-0.004217 max=0.004356 Jy/beam ! Clean residual mean=-0.000008 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.216523 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305356 Jy ! Component: 100 - total flux cleaned = 0.00556375 Jy ! Component: 150 - total flux cleaned = 0.00765693 Jy ! Component: 200 - total flux cleaned = 0.00942177 Jy ! Total flux subtracted in 200 components = 0.00942177 Jy ! Clean residual min=-0.003864 max=0.003643 Jy/beam ! Clean residual mean=-0.000008 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.225945 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 178 components and 0.225945 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.121 mas, bmaj=7.32 mas, bpa=-3.104 degrees ! Estimated noise=602.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019728 Jy ! Component: 100 - total flux cleaned = 0.00275876 Jy ! Component: 150 - total flux cleaned = 0.00310295 Jy ! Component: 200 - total flux cleaned = 0.00359505 Jy ! Total flux subtracted in 200 components = 0.00359505 Jy ! Clean residual min=-0.002776 max=0.002830 Jy/beam ! Clean residual mean=-0.000004 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.22954 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 202 components and 0.22954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085789Jy sigma=0.000778 ! Fit after self-cal, rms=0.085775Jy sigma=0.000778 wmodel J1451-0127_S_2015_01_22_pus_map.mod ! Writing 202 model components to file: J1451-0127_S_2015_01_22_pus_map.mod wobs J1451-0127_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1451-0127_S_2015_01_22_pus_uvs.fits wwins J1451-0127_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1451-0127_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582077 Jy ! Component: 100 - total flux cleaned = 0.00119813 Jy ! Component: 150 - total flux cleaned = 0.00172435 Jy ! Component: 200 - total flux cleaned = 0.00209484 Jy ! Component: 250 - total flux cleaned = 0.00232764 Jy ! Component: 300 - total flux cleaned = 0.00258709 Jy ! Component: 350 - total flux cleaned = 0.00290689 Jy ! Component: 400 - total flux cleaned = 0.00314716 Jy ! Component: 450 - total flux cleaned = 0.0034776 Jy ! Component: 500 - total flux cleaned = 0.00360516 Jy ! Component: 550 - total flux cleaned = 0.00363619 Jy ! Component: 600 - total flux cleaned = 0.00375675 Jy ! Component: 650 - total flux cleaned = 0.00384459 Jy ! Component: 700 - total flux cleaned = 0.0038734 Jy ! Component: 750 - total flux cleaned = 0.00378992 Jy ! Component: 800 - total flux cleaned = 0.00384495 Jy ! Component: 850 - total flux cleaned = 0.00384514 Jy ! Component: 900 - total flux cleaned = 0.00392315 Jy ! Component: 950 - total flux cleaned = 0.00397357 Jy ! Component: 1000 - total flux cleaned = 0.00399816 Jy ! Component: 1050 - total flux cleaned = 0.00402294 Jy ! Component: 1100 - total flux cleaned = 0.00404749 Jy ! Component: 1150 - total flux cleaned = 0.00404747 Jy ! Component: 1200 - total flux cleaned = 0.00402475 Jy ! Component: 1250 - total flux cleaned = 0.00409301 Jy ! Component: 1300 - total flux cleaned = 0.00411484 Jy ! Component: 1350 - total flux cleaned = 0.00409285 Jy ! Component: 1400 - total flux cleaned = 0.00400626 Jy ! Component: 1450 - total flux cleaned = 0.00402789 Jy ! Component: 1500 - total flux cleaned = 0.00411172 Jy ! Component: 1550 - total flux cleaned = 0.00405011 Jy ! Component: 1600 - total flux cleaned = 0.00405039 Jy ! Component: 1650 - total flux cleaned = 0.00410991 Jy ! Component: 1700 - total flux cleaned = 0.00410955 Jy ! Component: 1750 - total flux cleaned = 0.00412852 Jy ! Component: 1800 - total flux cleaned = 0.00409031 Jy ! Component: 1850 - total flux cleaned = 0.00414625 Jy ! Component: 1900 - total flux cleaned = 0.0040719 Jy ! Component: 1950 - total flux cleaned = 0.004109 Jy ! Component: 2000 - total flux cleaned = 0.00416329 Jy ! Component: 2050 - total flux cleaned = 0.00419926 Jy ! Component: 2100 - total flux cleaned = 0.00421711 Jy ! Component: 2150 - total flux cleaned = 0.00425226 Jy ! Component: 2200 - total flux cleaned = 0.00426955 Jy ! Component: 2250 - total flux cleaned = 0.00432102 Jy ! Component: 2300 - total flux cleaned = 0.00430424 Jy ! Component: 2350 - total flux cleaned = 0.00430426 Jy ! Component: 2400 - total flux cleaned = 0.00427114 Jy ! Component: 2450 - total flux cleaned = 0.00425474 Jy ! Component: 2500 - total flux cleaned = 0.00425507 Jy ! Component: 2550 - total flux cleaned = 0.00427124 Jy ! Component: 2600 - total flux cleaned = 0.00420754 Jy ! Component: 2650 - total flux cleaned = 0.00417609 Jy ! Component: 2700 - total flux cleaned = 0.00412931 Jy ! Component: 2750 - total flux cleaned = 0.00411395 Jy ! Component: 2800 - total flux cleaned = 0.00408322 Jy ! Component: 2850 - total flux cleaned = 0.00397692 Jy ! Component: 2900 - total flux cleaned = 0.00390173 Jy ! Component: 2950 - total flux cleaned = 0.00397603 Jy ! Component: 3000 - total flux cleaned = 0.00390209 Jy ! Component: 3050 - total flux cleaned = 0.00379956 Jy ! Component: 3100 - total flux cleaned = 0.00375594 Jy ! Component: 3150 - total flux cleaned = 0.00368399 Jy ! Component: 3200 - total flux cleaned = 0.00356982 Jy ! Component: 3250 - total flux cleaned = 0.00352749 Jy ! Component: 3300 - total flux cleaned = 0.00348546 Jy ! Component: 3350 - total flux cleaned = 0.00340198 Jy ! Component: 3400 - total flux cleaned = 0.00338837 Jy ! Component: 3450 - total flux cleaned = 0.00332001 Jy ! Component: 3500 - total flux cleaned = 0.00326559 Jy ! Component: 3550 - total flux cleaned = 0.00323867 Jy ! Component: 3600 - total flux cleaned = 0.00319892 Jy ! Component: 3650 - total flux cleaned = 0.00319882 Jy ! Component: 3700 - total flux cleaned = 0.00312 Jy ! Component: 3750 - total flux cleaned = 0.00312004 Jy ! Component: 3800 - total flux cleaned = 0.00306832 Jy ! Component: 3850 - total flux cleaned = 0.00299136 Jy ! Component: 3900 - total flux cleaned = 0.00297876 Jy ! Component: 3950 - total flux cleaned = 0.00294079 Jy ! Component: 4000 - total flux cleaned = 0.00295333 Jy ! Component: 4050 - total flux cleaned = 0.00291593 Jy ! Total flux subtracted in 4096 components = 0.00289109 Jy ! Clean residual min=-0.000767 max=0.000716 Jy/beam ! Clean residual mean=-0.000001 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.232432 Jy keep ! Adding 326 model components to the UV plane model. ! The established model now contains 528 components and 0.232432 Jy ![Exited script file: muppet] wmap "J1451-0127_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.32 at -3.104 degrees (North through East) ! Clean map min=-0.0016566 max=0.14298 Jy/beam ! Writing clean map to FITS file: J1451-0127_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.142977 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000225466 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.473081 0.473081 0.946161 1.89232 3.78464 7.56929 15.1386 30.2772 60.5543 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.142 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.121 x 7.32 at -3.104 degrees (North through East) ! Clean map min=-0.0016566 max=0.14298 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1451-0127_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:56:42 2017