! Started logfile: J1450+0910_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:13 2017 obs J1450+0910_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1450+0910_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.5 visibilities/baseline/integration-bin. ! Found source: J1450+0910 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4320 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1450+0910_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.707827Jy sigma=0.010320 ! Fit after self-cal, rms=0.648596Jy sigma=0.009603 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=5.644 mas, bpa=-4.545 degrees ! Estimated noise=997.426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270214 Jy ! Component: 100 - total flux cleaned = 0.329138 Jy ! Total flux subtracted in 100 components = 0.329138 Jy ! Clean residual min=-0.011981 max=0.018608 Jy/beam ! Clean residual mean=-0.000100 rms=0.003337 Jy/beam ! Combined flux in latest and established models = 0.329138 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.329138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087024Jy sigma=0.001100 ! Fit after self-cal, rms=0.087019Jy sigma=0.001100 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=6.414 mas, bpa=-5.358 degrees ! Estimated noise=780.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201644 Jy ! Component: 100 - total flux cleaned = 0.0317978 Jy ! Component: 150 - total flux cleaned = 0.0393787 Jy ! Component: 200 - total flux cleaned = 0.0448477 Jy ! Total flux subtracted in 200 components = 0.0448477 Jy ! Clean residual min=-0.009706 max=0.009744 Jy/beam ! Clean residual mean=-0.000062 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.373986 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.373986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080093Jy sigma=0.001044 ! Fit after self-cal, rms=0.079878Jy sigma=0.001043 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.84 KP 1.00* LA 1.02 ! MK 0.99 NL 0.97 OV 0.97 PT 1.03 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 KP 1.00* LA 1.00 ! MK 1.01 NL 1.03 OV 1.01 PT 1.02 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 KP 1.00* LA 0.81 ! MK 1.02 NL 1.00 OV 0.93 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.98 KP 1.00* LA 0.88 ! MK 0.99 NL 1.08 OV 1.00 PT 1.05 ! SC 0.93 ! ! ! Fit before self-cal, rms=0.079878Jy sigma=0.001043 ! Fit after self-cal, rms=0.068802Jy sigma=0.000925 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.451 mas, bpa=-4.811 degrees ! Estimated noise=777.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00430508 Jy ! Component: 100 - total flux cleaned = -0.00649611 Jy ! Component: 150 - total flux cleaned = -0.00730346 Jy ! Component: 200 - total flux cleaned = -0.00780963 Jy ! Total flux subtracted in 200 components = -0.00780963 Jy ! Clean residual min=-0.004450 max=0.003951 Jy/beam ! Clean residual mean=-0.000004 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.366176 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.366176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068527Jy sigma=0.000921 ! Fit after self-cal, rms=0.068364Jy sigma=0.000920 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068364Jy sigma=0.000920 ! Fit after self-cal, rms=0.067971Jy sigma=0.000913 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=6.45 mas, bpa=-4.849 degrees ! Estimated noise=777.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00158374 Jy ! Component: 100 - total flux cleaned = -0.00144426 Jy ! Component: 150 - total flux cleaned = -0.00132755 Jy ! Component: 200 - total flux cleaned = -0.0012316 Jy ! Total flux subtracted in 200 components = -0.0012316 Jy ! Clean residual min=-0.003840 max=0.002797 Jy/beam ! Clean residual mean=-0.000023 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.364945 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.364945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067897Jy sigma=0.000912 ! Fit after self-cal, rms=0.067892Jy sigma=0.000912 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.59942e-05 Jy ! Component: 100 - total flux cleaned = 0.000102485 Jy ! Component: 150 - total flux cleaned = 7.84055e-05 Jy ! Component: 200 - total flux cleaned = 0.000101283 Jy ! Total flux subtracted in 200 components = 0.000101283 Jy ! Clean residual min=-0.003745 max=0.002850 Jy/beam ! Clean residual mean=-0.000022 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.365046 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 65 components and 0.365046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067871Jy sigma=0.000912 ! Fit after self-cal, rms=0.067874Jy sigma=0.000912 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067874Jy sigma=0.000912 ! Fit after self-cal, rms=0.067698Jy sigma=0.000912 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=6.453 mas, bpa=-4.863 degrees ! Estimated noise=776.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109006 Jy ! Component: 100 - total flux cleaned = -0.00132328 Jy ! Component: 150 - total flux cleaned = -0.00130042 Jy ! Component: 200 - total flux cleaned = -0.00123893 Jy ! Total flux subtracted in 200 components = -0.00123893 Jy ! Clean residual min=-0.003371 max=0.002728 Jy/beam ! Clean residual mean=-0.000022 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.363807 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 76 components and 0.363807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067669Jy sigma=0.000911 ! Fit after self-cal, rms=0.067660Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.06984e-05 Jy ! Component: 100 - total flux cleaned = -1.90954e-05 Jy ! Component: 150 - total flux cleaned = -1.18853e-06 Jy ! Component: 200 - total flux cleaned = -1.84429e-05 Jy ! Total flux subtracted in 200 components = -1.84429e-05 Jy ! Clean residual min=-0.003321 max=0.002769 Jy/beam ! Clean residual mean=-0.000022 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.363789 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.363789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067650Jy sigma=0.000911 ! Fit after self-cal, rms=0.067652Jy sigma=0.000911 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067652Jy sigma=0.000911 ! Fit after self-cal, rms=0.067531Jy sigma=0.000911 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=10.39 mas, bpa=8.162 degrees ! Estimated noise=960.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000178444 Jy ! Component: 100 - total flux cleaned = -0.000114128 Jy ! Component: 150 - total flux cleaned = -0.00012938 Jy ! Component: 200 - total flux cleaned = -0.000103357 Jy ! Total flux subtracted in 200 components = -0.000103357 Jy ! Clean residual min=-0.003010 max=0.002683 Jy/beam ! Clean residual mean=-0.000040 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.363685 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 0.363685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067520Jy sigma=0.000911 ! Fit after self-cal, rms=0.067514Jy sigma=0.000911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.09887e-05 Jy ! Component: 100 - total flux cleaned = 9.58161e-05 Jy ! Component: 150 - total flux cleaned = 0.000106764 Jy ! Component: 200 - total flux cleaned = 0.000117038 Jy ! Total flux subtracted in 200 components = 0.000117038 Jy ! Clean residual min=-0.002957 max=0.002659 Jy/beam ! Clean residual mean=-0.000039 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.363802 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 103 components and 0.363802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067510Jy sigma=0.000911 ! Fit after self-cal, rms=0.067513Jy sigma=0.000911 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=6.455 mas, bpa=-4.878 degrees ! Estimated noise=776.473 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 6.455 at -4.878 degrees (North through East) ! Clean map min=-0.0029757 max=0.34162 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=5.67 mas, bpa=-3.942 degrees ! Estimated noise=995.139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269587 Jy ! Component: 100 - total flux cleaned = 0.328403 Jy ! Component: 150 - total flux cleaned = 0.342327 Jy ! Component: 200 - total flux cleaned = 0.348345 Jy ! Total flux subtracted in 200 components = 0.348345 Jy ! Clean residual min=-0.004656 max=0.004794 Jy/beam ! Clean residual mean=-0.000034 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.348346 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.348346 Jy ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=6.455 mas, bpa=-4.878 degrees ! Estimated noise=776.473 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0049376 Jy ! Component: 100 - total flux cleaned = 0.00816713 Jy ! Component: 150 - total flux cleaned = 0.0104566 Jy ! Component: 200 - total flux cleaned = 0.0120868 Jy ! Total flux subtracted in 200 components = 0.0120868 Jy ! Clean residual min=-0.002612 max=0.002738 Jy/beam ! Clean residual mean=-0.000035 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.360432 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 42 components and 0.360433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=10.39 mas, bpa=8.162 degrees ! Estimated noise=960.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226717 Jy ! Component: 100 - total flux cleaned = 0.00377327 Jy ! Component: 150 - total flux cleaned = 0.0049265 Jy ! Component: 200 - total flux cleaned = 0.00582324 Jy ! Total flux subtracted in 200 components = 0.00582324 Jy ! Clean residual min=-0.002451 max=0.002551 Jy/beam ! Clean residual mean=-0.000023 rms=0.000735 Jy/beam ! Combined flux in latest and established models = 0.366256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713408 Jy ! Component: 100 - total flux cleaned = 0.00113651 Jy ! Component: 150 - total flux cleaned = 0.00138482 Jy ! Component: 200 - total flux cleaned = 0.00159628 Jy ! Total flux subtracted in 200 components = 0.00159628 Jy ! Clean residual min=-0.002431 max=0.002537 Jy/beam ! Clean residual mean=-0.000010 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.367852 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 0.367852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=6.455 mas, bpa=-4.878 degrees ! Estimated noise=776.473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.39129e-05 Jy ! Component: 100 - total flux cleaned = 4.27546e-05 Jy ! Component: 150 - total flux cleaned = 0.000168657 Jy ! Component: 200 - total flux cleaned = 0.000314489 Jy ! Total flux subtracted in 200 components = 0.000314489 Jy ! Clean residual min=-0.002842 max=0.002555 Jy/beam ! Clean residual mean=-0.000003 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.368167 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 94 components and 0.368167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067480Jy sigma=0.000910 ! Fit after self-cal, rms=0.067472Jy sigma=0.000910 wmodel J1450+0910_S_2014_01_04_pus_map.mod ! Writing 94 model components to file: J1450+0910_S_2014_01_04_pus_map.mod wobs J1450+0910_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1450+0910_S_2014_01_04_pus_uvs.fits wwins J1450+0910_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1450+0910_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.21841e-05 Jy ! Component: 100 - total flux cleaned = -0.000106475 Jy ! Component: 150 - total flux cleaned = -0.000347424 Jy ! Component: 200 - total flux cleaned = -0.000613764 Jy ! Component: 250 - total flux cleaned = -0.000828265 Jy ! Component: 300 - total flux cleaned = -0.00100115 Jy ! Component: 350 - total flux cleaned = -0.00116785 Jy ! Component: 400 - total flux cleaned = -0.00126373 Jy ! Component: 450 - total flux cleaned = -0.00145026 Jy ! Component: 500 - total flux cleaned = -0.00157015 Jy ! Component: 550 - total flux cleaned = -0.0015996 Jy ! Component: 600 - total flux cleaned = -0.00160008 Jy ! Component: 650 - total flux cleaned = -0.00171012 Jy ! Component: 700 - total flux cleaned = -0.00178976 Jy ! Component: 750 - total flux cleaned = -0.00184158 Jy ! Component: 800 - total flux cleaned = -0.00191795 Jy ! Component: 850 - total flux cleaned = -0.00206573 Jy ! Component: 900 - total flux cleaned = -0.00206506 Jy ! Component: 950 - total flux cleaned = -0.00215936 Jy ! Component: 1000 - total flux cleaned = -0.00222846 Jy ! Component: 1050 - total flux cleaned = -0.00229577 Jy ! Component: 1100 - total flux cleaned = -0.00231762 Jy ! Component: 1150 - total flux cleaned = -0.00238237 Jy ! Component: 1200 - total flux cleaned = -0.00242507 Jy ! Component: 1250 - total flux cleaned = -0.00244644 Jy ! Component: 1300 - total flux cleaned = -0.00248708 Jy ! Component: 1350 - total flux cleaned = -0.00258692 Jy ! Component: 1400 - total flux cleaned = -0.00268502 Jy ! Component: 1450 - total flux cleaned = -0.00276224 Jy ! Component: 1500 - total flux cleaned = -0.00283863 Jy ! Component: 1550 - total flux cleaned = -0.00293238 Jy ! Component: 1600 - total flux cleaned = -0.00306148 Jy ! Component: 1650 - total flux cleaned = -0.00318874 Jy ! Component: 1700 - total flux cleaned = -0.00326063 Jy ! Component: 1750 - total flux cleaned = -0.00342003 Jy ! Component: 1800 - total flux cleaned = -0.00350724 Jy ! Component: 1850 - total flux cleaned = -0.00364516 Jy ! Component: 1900 - total flux cleaned = -0.00381533 Jy ! Component: 1950 - total flux cleaned = -0.00393274 Jy ! Component: 2000 - total flux cleaned = -0.0040822 Jy ! Component: 2050 - total flux cleaned = -0.00424591 Jy ! Component: 2100 - total flux cleaned = -0.00437495 Jy ! Component: 2150 - total flux cleaned = -0.00450235 Jy ! Component: 2200 - total flux cleaned = -0.00464432 Jy ! Component: 2250 - total flux cleaned = -0.00481544 Jy ! Component: 2300 - total flux cleaned = -0.00495381 Jy ! Component: 2350 - total flux cleaned = -0.0051361 Jy ! Component: 2400 - total flux cleaned = -0.00528605 Jy ! Component: 2450 - total flux cleaned = -0.00541955 Jy ! Component: 2500 - total flux cleaned = -0.00553699 Jy ! Component: 2550 - total flux cleaned = -0.00566789 Jy ! Component: 2600 - total flux cleaned = -0.00584049 Jy ! Component: 2650 - total flux cleaned = -0.00598295 Jy ! Component: 2700 - total flux cleaned = -0.00613808 Jy ! Component: 2750 - total flux cleaned = -0.0062916 Jy ! Component: 2800 - total flux cleaned = -0.00642996 Jy ! Component: 2850 - total flux cleaned = -0.00653969 Jy ! Component: 2900 - total flux cleaned = -0.00667568 Jy ! Component: 2950 - total flux cleaned = -0.00679707 Jy ! Component: 3000 - total flux cleaned = -0.00687728 Jy ! Component: 3050 - total flux cleaned = -0.00701008 Jy ! Component: 3100 - total flux cleaned = -0.00710222 Jy ! Component: 3150 - total flux cleaned = -0.00716769 Jy ! Component: 3200 - total flux cleaned = -0.00727183 Jy ! Component: 3250 - total flux cleaned = -0.00737512 Jy ! Component: 3300 - total flux cleaned = -0.00743919 Jy ! Component: 3350 - total flux cleaned = -0.00752838 Jy ! Component: 3400 - total flux cleaned = -0.00756627 Jy ! Component: 3450 - total flux cleaned = -0.0076293 Jy ! Component: 3500 - total flux cleaned = -0.00766696 Jy ! Component: 3550 - total flux cleaned = -0.00776659 Jy ! Component: 3600 - total flux cleaned = -0.00781605 Jy ! Component: 3650 - total flux cleaned = -0.00788988 Jy ! Component: 3700 - total flux cleaned = -0.0079511 Jy ! Component: 3750 - total flux cleaned = -0.00801202 Jy ! Component: 3800 - total flux cleaned = -0.00808474 Jy ! Component: 3850 - total flux cleaned = -0.00815712 Jy ! Component: 3900 - total flux cleaned = -0.00824111 Jy ! Component: 3950 - total flux cleaned = -0.0083366 Jy ! Component: 4000 - total flux cleaned = -0.00841987 Jy ! Component: 4050 - total flux cleaned = -0.00847916 Jy ! Total flux subtracted in 4096 components = -0.00857373 Jy ! Clean residual min=-0.000835 max=0.000723 Jy/beam ! Clean residual mean=0.000005 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.359593 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 325 components and 0.359593 Jy ![Exited script file: muppet] wmap "J1450+0910_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 6.455 at -4.878 degrees (North through East) ! Clean map min=-0.0015192 max=0.34255 Jy/beam ! Writing clean map to FITS file: J1450+0910_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.342551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181419 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.158883 0.158883 0.317767 0.635533 1.27107 2.54213 5.08426 10.1685 20.3371 40.6741 81.3482 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.342 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 6.455 at -4.878 degrees (North through East) ! Clean map min=-0.0015192 max=0.34255 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1450+0910_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:17 2017