! Started logfile: J1442+3234_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:30:03 2017 obs J1442+3234_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1442+3234_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1442+3234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6536 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1442+3234_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.843115Jy sigma=0.011999 ! Fit after self-cal, rms=0.824461Jy sigma=0.011758 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=4.497 mas, bpa=35.99 degrees ! Estimated noise=1066.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.129972 Jy ! Component: 100 - total flux cleaned = 0.161007 Jy ! Total flux subtracted in 100 components = 0.161007 Jy ! Clean residual min=-0.011603 max=0.016871 Jy/beam ! Clean residual mean=-0.000021 rms=0.003201 Jy/beam ! Combined flux in latest and established models = 0.161007 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.161007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087471Jy sigma=0.001092 ! Fit after self-cal, rms=0.087491Jy sigma=0.001091 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.561 mas, bmaj=5.232 mas, bpa=36.93 degrees ! Estimated noise=657.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211995 Jy ! Component: 100 - total flux cleaned = 0.031804 Jy ! Component: 150 - total flux cleaned = 0.0385136 Jy ! Component: 200 - total flux cleaned = 0.0429283 Jy ! Total flux subtracted in 200 components = 0.0429283 Jy ! Clean residual min=-0.014812 max=0.020163 Jy/beam ! Clean residual mean=0.000007 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 0.203935 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.203935 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080865Jy sigma=0.001041 ! Fit after self-cal, rms=0.080791Jy sigma=0.001040 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.73 KP 1.00* LA 0.94 ! MK 0.99 NL 0.99 OV 1.16 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.85 KP 1.00* LA 0.91 ! MK 1.00 NL 1.05 OV 1.19 PT 0.91 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.96 KP 1.00* LA 0.75 ! MK 0.99 NL 1.03 OV 1.10 PT 0.87 ! SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.87 KP 1.00* LA 0.80 ! MK 0.97 NL 1.09 OV 1.18 PT 0.94 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.080791Jy sigma=0.001040 ! Fit after self-cal, rms=0.072494Jy sigma=0.000944 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.598 mas, bmaj=5.271 mas, bpa=33.27 degrees ! Estimated noise=658.383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (27.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143462 Jy ! Component: 100 - total flux cleaned = 0.0213176 Jy ! Component: 150 - total flux cleaned = 0.0233085 Jy ! Component: 200 - total flux cleaned = 0.0249139 Jy ! Total flux subtracted in 200 components = 0.0249139 Jy ! Clean residual min=-0.006293 max=0.008478 Jy/beam ! Clean residual mean=0.000037 rms=0.001881 Jy/beam ! Combined flux in latest and established models = 0.228849 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.228849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069735Jy sigma=0.000903 ! Fit after self-cal, rms=0.069217Jy sigma=0.000899 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069217Jy sigma=0.000899 ! Fit after self-cal, rms=0.068026Jy sigma=0.000894 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.604 mas, bmaj=5.224 mas, bpa=33.15 degrees ! Estimated noise=650.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440085 Jy ! Component: 100 - total flux cleaned = 0.0055154 Jy ! Component: 150 - total flux cleaned = 0.00591378 Jy ! Component: 200 - total flux cleaned = 0.00612132 Jy ! Total flux subtracted in 200 components = 0.00612132 Jy ! Clean residual min=-0.005468 max=0.006167 Jy/beam ! Clean residual mean=0.000035 rms=0.001529 Jy/beam ! Combined flux in latest and established models = 0.23497 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.23497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067701Jy sigma=0.000889 ! Fit after self-cal, rms=0.067677Jy sigma=0.000888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000888479 Jy ! Component: 100 - total flux cleaned = 0.00101087 Jy ! Component: 150 - total flux cleaned = 0.00106179 Jy ! Component: 200 - total flux cleaned = 0.00105927 Jy ! Total flux subtracted in 200 components = 0.00105927 Jy ! Clean residual min=-0.005268 max=0.005907 Jy/beam ! Clean residual mean=0.000036 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.23603 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 87 components and 0.23603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067587Jy sigma=0.000887 ! Fit after self-cal, rms=0.067574Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067574Jy sigma=0.000887 ! Fit after self-cal, rms=0.067241Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.601 mas, bmaj=5.224 mas, bpa=33.09 degrees ! Estimated noise=647.894 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167029 Jy ! Component: 100 - total flux cleaned = 0.00199944 Jy ! Component: 150 - total flux cleaned = 0.00223758 Jy ! Component: 200 - total flux cleaned = 0.00232419 Jy ! Total flux subtracted in 200 components = 0.00232419 Jy ! Clean residual min=-0.004987 max=0.005729 Jy/beam ! Clean residual mean=0.000034 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.238354 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.238354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067152Jy sigma=0.000885 ! Fit after self-cal, rms=0.067149Jy sigma=0.000885 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320761 Jy ! Component: 100 - total flux cleaned = 0.000397558 Jy ! Component: 150 - total flux cleaned = 0.00046832 Jy ! Component: 200 - total flux cleaned = 0.000501103 Jy ! Total flux subtracted in 200 components = 0.000501103 Jy ! Clean residual min=-0.004889 max=0.005593 Jy/beam ! Clean residual mean=0.000034 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 0.238855 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.238855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067114Jy sigma=0.000884 ! Fit after self-cal, rms=0.067108Jy sigma=0.000884 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067108Jy sigma=0.000884 ! Fit after self-cal, rms=0.066942Jy sigma=0.000884 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.608 mas, bmaj=9.673 mas, bpa=40.76 degrees ! Estimated noise=739.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00150121 Jy ! Component: 100 - total flux cleaned = 0.0019742 Jy ! Component: 150 - total flux cleaned = 0.00236655 Jy ! Component: 200 - total flux cleaned = 0.00253798 Jy ! Total flux subtracted in 200 components = 0.00253798 Jy ! Clean residual min=-0.006042 max=0.007362 Jy/beam ! Clean residual mean=0.000059 rms=0.002080 Jy/beam ! Combined flux in latest and established models = 0.241393 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.241393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066940Jy sigma=0.000884 ! Fit after self-cal, rms=0.066919Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169268 Jy ! Component: 100 - total flux cleaned = 0.000509927 Jy ! Component: 150 - total flux cleaned = 0.000585195 Jy ! Component: 200 - total flux cleaned = 0.000620494 Jy ! Total flux subtracted in 200 components = 0.000620494 Jy ! Clean residual min=-0.006023 max=0.007302 Jy/beam ! Clean residual mean=0.000059 rms=0.002034 Jy/beam ! Combined flux in latest and established models = 0.242014 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.242014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066937Jy sigma=0.000883 ! Fit after self-cal, rms=0.066925Jy sigma=0.000883 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.599 mas, bmaj=5.228 mas, bpa=33.08 degrees ! Estimated noise=646.926 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.599 x 5.228 at 33.08 degrees (North through East) ! Clean map min=-0.004729 max=0.16839 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.825 mas, bmaj=4.429 mas, bpa=31.7 degrees ! Estimated noise=1066.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130077 Jy ! Component: 100 - total flux cleaned = 0.162791 Jy ! Component: 150 - total flux cleaned = 0.178507 Jy ! Component: 200 - total flux cleaned = 0.189246 Jy ! Total flux subtracted in 200 components = 0.189246 Jy ! Clean residual min=-0.007408 max=0.009598 Jy/beam ! Clean residual mean=0.000002 rms=0.002082 Jy/beam ! Combined flux in latest and established models = 0.189246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.189246 Jy ! Inverting map and beam ! Estimated beam: bmin=4.599 mas, bmaj=5.228 mas, bpa=33.08 degrees ! Estimated noise=646.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136403 Jy ! Component: 100 - total flux cleaned = 0.0230942 Jy ! Component: 150 - total flux cleaned = 0.0302684 Jy ! Component: 200 - total flux cleaned = 0.0358379 Jy ! Total flux subtracted in 200 components = 0.0358379 Jy ! Clean residual min=-0.005128 max=0.005205 Jy/beam ! Clean residual mean=0.000027 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.225084 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 64 components and 0.225084 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.608 mas, bmaj=9.673 mas, bpa=40.76 degrees ! Estimated noise=739.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697768 Jy ! Component: 100 - total flux cleaned = 0.0116818 Jy ! Component: 150 - total flux cleaned = 0.0150395 Jy ! Component: 200 - total flux cleaned = 0.0174969 Jy ! Total flux subtracted in 200 components = 0.0174969 Jy ! Clean residual min=-0.005200 max=0.005820 Jy/beam ! Clean residual mean=0.000056 rms=0.001681 Jy/beam ! Combined flux in latest and established models = 0.24258 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182592 Jy ! Component: 100 - total flux cleaned = 0.00310354 Jy ! Component: 150 - total flux cleaned = 0.00356226 Jy ! Component: 200 - total flux cleaned = 0.00368816 Jy ! Total flux subtracted in 200 components = 0.00368816 Jy ! Clean residual min=-0.005078 max=0.005880 Jy/beam ! Clean residual mean=0.000056 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.246269 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 131 components and 0.246269 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.599 mas, bmaj=5.228 mas, bpa=33.08 degrees ! Estimated noise=646.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.2716e-05 Jy ! Component: 100 - total flux cleaned = 2.82272e-05 Jy ! Component: 150 - total flux cleaned = 0.000253447 Jy ! Component: 200 - total flux cleaned = 0.000405666 Jy ! Total flux subtracted in 200 components = 0.000405666 Jy ! Clean residual min=-0.004011 max=0.004111 Jy/beam ! Clean residual mean=0.000030 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.246674 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 149 components and 0.246674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066554Jy sigma=0.000876 ! Fit after self-cal, rms=0.066432Jy sigma=0.000875 wmodel J1442+3234_S_2014_01_04_pus_map.mod ! Writing 149 model components to file: J1442+3234_S_2014_01_04_pus_map.mod wobs J1442+3234_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1442+3234_S_2014_01_04_pus_uvs.fits wwins J1442+3234_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1442+3234_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000295436 Jy ! Component: 100 - total flux cleaned = 0.00082071 Jy ! Component: 150 - total flux cleaned = 0.00166268 Jy ! Component: 200 - total flux cleaned = 0.00233758 Jy ! Component: 250 - total flux cleaned = 0.00302551 Jy ! Component: 300 - total flux cleaned = 0.0037223 Jy ! Component: 350 - total flux cleaned = 0.00414597 Jy ! Component: 400 - total flux cleaned = 0.00446117 Jy ! Component: 450 - total flux cleaned = 0.00476282 Jy ! Component: 500 - total flux cleaned = 0.00500853 Jy ! Component: 550 - total flux cleaned = 0.0051274 Jy ! Component: 600 - total flux cleaned = 0.00531923 Jy ! Component: 650 - total flux cleaned = 0.00546733 Jy ! Component: 700 - total flux cleaned = 0.00557219 Jy ! Component: 750 - total flux cleaned = 0.00557213 Jy ! Component: 800 - total flux cleaned = 0.00553961 Jy ! Component: 850 - total flux cleaned = 0.00554004 Jy ! Component: 900 - total flux cleaned = 0.00538385 Jy ! Component: 950 - total flux cleaned = 0.00526367 Jy ! Component: 1000 - total flux cleaned = 0.00517476 Jy ! Component: 1050 - total flux cleaned = 0.00505939 Jy ! Component: 1100 - total flux cleaned = 0.00497524 Jy ! Component: 1150 - total flux cleaned = 0.00481257 Jy ! Component: 1200 - total flux cleaned = 0.00468093 Jy ! Component: 1250 - total flux cleaned = 0.00463005 Jy ! Component: 1300 - total flux cleaned = 0.00455411 Jy ! Component: 1350 - total flux cleaned = 0.00438256 Jy ! Component: 1400 - total flux cleaned = 0.00431077 Jy ! Component: 1450 - total flux cleaned = 0.00423973 Jy ! Component: 1500 - total flux cleaned = 0.00403427 Jy ! Component: 1550 - total flux cleaned = 0.00403388 Jy ! Component: 1600 - total flux cleaned = 0.00394651 Jy ! Component: 1650 - total flux cleaned = 0.00396767 Jy ! Component: 1700 - total flux cleaned = 0.00394631 Jy ! Component: 1750 - total flux cleaned = 0.00392588 Jy ! Component: 1800 - total flux cleaned = 0.003966 Jy ! Component: 1850 - total flux cleaned = 0.00394622 Jy ! Component: 1900 - total flux cleaned = 0.00398486 Jy ! Component: 1950 - total flux cleaned = 0.00400378 Jy ! Component: 2000 - total flux cleaned = 0.0040042 Jy ! Component: 2050 - total flux cleaned = 0.00404074 Jy ! Component: 2100 - total flux cleaned = 0.00407678 Jy ! Component: 2150 - total flux cleaned = 0.00414759 Jy ! Component: 2200 - total flux cleaned = 0.00423467 Jy ! Component: 2250 - total flux cleaned = 0.00428602 Jy ! Component: 2300 - total flux cleaned = 0.00435377 Jy ! Component: 2350 - total flux cleaned = 0.0044202 Jy ! Component: 2400 - total flux cleaned = 0.00446901 Jy ! Component: 2450 - total flux cleaned = 0.00450125 Jy ! Component: 2500 - total flux cleaned = 0.0046119 Jy ! Component: 2550 - total flux cleaned = 0.00462725 Jy ! Component: 2600 - total flux cleaned = 0.00468858 Jy ! Component: 2650 - total flux cleaned = 0.00473379 Jy ! Component: 2700 - total flux cleaned = 0.00477846 Jy ! Component: 2750 - total flux cleaned = 0.00482261 Jy ! Component: 2800 - total flux cleaned = 0.00482254 Jy ! Component: 2850 - total flux cleaned = 0.0049087 Jy ! Component: 2900 - total flux cleaned = 0.00493716 Jy ! Component: 2950 - total flux cleaned = 0.00496511 Jy ! Component: 3000 - total flux cleaned = 0.00497902 Jy ! Component: 3050 - total flux cleaned = 0.00500652 Jy ! Component: 3100 - total flux cleaned = 0.00503358 Jy ! Component: 3150 - total flux cleaned = 0.00507367 Jy ! Component: 3200 - total flux cleaned = 0.0051002 Jy ! Component: 3250 - total flux cleaned = 0.00510029 Jy ! Component: 3300 - total flux cleaned = 0.00512622 Jy ! Component: 3350 - total flux cleaned = 0.00519044 Jy ! Component: 3400 - total flux cleaned = 0.00524126 Jy ! Component: 3450 - total flux cleaned = 0.00522845 Jy ! Component: 3500 - total flux cleaned = 0.00526582 Jy ! Component: 3550 - total flux cleaned = 0.00530295 Jy ! Component: 3600 - total flux cleaned = 0.00535199 Jy ! Component: 3650 - total flux cleaned = 0.00541284 Jy ! Component: 3700 - total flux cleaned = 0.00548508 Jy ! Component: 3750 - total flux cleaned = 0.00553301 Jy ! Component: 3800 - total flux cleaned = 0.0056158 Jy ! Component: 3850 - total flux cleaned = 0.00563918 Jy ! Component: 3900 - total flux cleaned = 0.00569751 Jy ! Component: 3950 - total flux cleaned = 0.0057784 Jy ! Component: 4000 - total flux cleaned = 0.00582413 Jy ! Component: 4050 - total flux cleaned = 0.00588098 Jy ! Total flux subtracted in 4096 components = 0.00593735 Jy ! Clean residual min=-0.000649 max=0.000792 Jy/beam ! Clean residual mean=0.000006 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.252612 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 435 components and 0.252612 Jy ![Exited script file: muppet] wmap "J1442+3234_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.599 x 5.228 at 33.08 degrees (North through East) ! Clean map min=-0.0016606 max=0.17054 Jy/beam ! Writing clean map to FITS file: J1442+3234_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.170536 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204786 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.360251 0.360251 0.720503 1.44101 2.88201 5.76402 11.528 23.0561 46.1122 92.2244 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.17 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.599 x 5.228 at 33.08 degrees (North through East) ! Clean map min=-0.0016606 max=0.17054 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1442+3234_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:07 2017