! Started logfile: J1441-3456_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:58 2017 obs J1441-3456_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1441-3456_S_2014_01_04_pus_uva.fits ! AN table 1: 125 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.373333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1441-3456 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1441-3456_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 439 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.842623Jy sigma=0.008231 ! Fit after self-cal, rms=0.757479Jy sigma=0.007385 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.24 mas, bmaj=6.642 mas, bpa=-0.2362 degrees ! Estimated noise=1543.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1796 Jy ! Component: 100 - total flux cleaned = 0.225282 Jy ! Total flux subtracted in 100 components = 0.225282 Jy ! Clean residual min=-0.016213 max=0.021600 Jy/beam ! Clean residual mean=0.000622 rms=0.004517 Jy/beam ! Combined flux in latest and established models = 0.225282 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.225282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119075Jy sigma=0.001044 ! Fit after self-cal, rms=0.119056Jy sigma=0.001044 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=8.059 mas, bpa=-0.8136 degrees ! Estimated noise=935.979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313493 Jy ! Component: 100 - total flux cleaned = 0.0458061 Jy ! Component: 150 - total flux cleaned = 0.0532643 Jy ! Component: 200 - total flux cleaned = 0.0573238 Jy ! Total flux subtracted in 200 components = 0.0573238 Jy ! Clean residual min=-0.010177 max=0.016995 Jy/beam ! Clean residual mean=0.000371 rms=0.003438 Jy/beam ! Combined flux in latest and established models = 0.282606 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 43 components and 0.282606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109415Jy sigma=0.000996 ! Fit after self-cal, rms=0.109511Jy sigma=0.000995 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* KP 1.00* LA 0.99 ! MK 1.00 NL 1.07 OV 0.94 PT 0.98 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.00* KP 1.00* LA 0.96 ! MK 1.00 NL 1.12 OV 0.97 PT 0.95 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* KP 1.00* LA 0.81 ! MK 1.01 NL 1.10 OV 0.91 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 1.00* KP 1.00* LA 0.86 ! MK 1.02 NL 1.26 OV 0.95 PT 0.99 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.109511Jy sigma=0.000995 ! Fit after self-cal, rms=0.103566Jy sigma=0.000889 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=8.159 mas, bpa=-0.6567 degrees ! Estimated noise=940.004 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140416 Jy ! Component: 100 - total flux cleaned = 0.00179936 Jy ! Component: 150 - total flux cleaned = 0.00203341 Jy ! Component: 200 - total flux cleaned = 0.00228014 Jy ! Total flux subtracted in 200 components = 0.00228014 Jy ! Clean residual min=-0.003642 max=0.003328 Jy/beam ! Clean residual mean=-0.000091 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.284886 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.284886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103495Jy sigma=0.000889 ! Fit after self-cal, rms=0.103174Jy sigma=0.000888 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103174Jy sigma=0.000888 ! Fit after self-cal, rms=0.103667Jy sigma=0.000887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.872 mas, bmaj=8.152 mas, bpa=-0.6377 degrees ! Estimated noise=944.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159264 Jy ! Component: 100 - total flux cleaned = 0.0018362 Jy ! Component: 150 - total flux cleaned = 0.00204588 Jy ! Component: 200 - total flux cleaned = 0.00222696 Jy ! Total flux subtracted in 200 components = 0.00222696 Jy ! Clean residual min=-0.003353 max=0.003195 Jy/beam ! Clean residual mean=0.000203 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.287113 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.287113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103614Jy sigma=0.000887 ! Fit after self-cal, rms=0.103605Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21951e-05 Jy ! Component: 100 - total flux cleaned = 9.48921e-05 Jy ! Component: 150 - total flux cleaned = 9.48473e-05 Jy ! Component: 200 - total flux cleaned = 0.000119446 Jy ! Total flux subtracted in 200 components = 0.000119446 Jy ! Clean residual min=-0.003313 max=0.003213 Jy/beam ! Clean residual mean=0.000197 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.287233 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 58 components and 0.287233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103588Jy sigma=0.000887 ! Fit after self-cal, rms=0.103588Jy sigma=0.000887 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103588Jy sigma=0.000887 ! Fit after self-cal, rms=0.103879Jy sigma=0.000887 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.867 mas, bmaj=8.147 mas, bpa=-0.6162 degrees ! Estimated noise=947.762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143575 Jy ! Component: 100 - total flux cleaned = 0.00180697 Jy ! Component: 150 - total flux cleaned = 0.00196906 Jy ! Component: 200 - total flux cleaned = 0.00210977 Jy ! Total flux subtracted in 200 components = 0.00210977 Jy ! Clean residual min=-0.003235 max=0.003179 Jy/beam ! Clean residual mean=0.000196 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.289343 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.289343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103841Jy sigma=0.000887 ! Fit after self-cal, rms=0.103837Jy sigma=0.000887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.91448e-05 Jy ! Component: 100 - total flux cleaned = 0.00010132 Jy ! Component: 150 - total flux cleaned = 0.000119552 Jy ! Component: 200 - total flux cleaned = 0.000120112 Jy ! Total flux subtracted in 200 components = 0.000120112 Jy ! Clean residual min=-0.003207 max=0.003196 Jy/beam ! Clean residual mean=0.000193 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.289463 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 60 components and 0.289463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103828Jy sigma=0.000887 ! Fit after self-cal, rms=0.103827Jy sigma=0.000887 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103827Jy sigma=0.000887 ! Fit after self-cal, rms=0.104086Jy sigma=0.000886 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=24.61 mas, bpa=3.387 degrees ! Estimated noise=1229.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173427 Jy ! Component: 100 - total flux cleaned = 0.00234866 Jy ! Component: 150 - total flux cleaned = 0.0024269 Jy ! Component: 200 - total flux cleaned = 0.00245091 Jy ! Total flux subtracted in 200 components = 0.00245091 Jy ! Clean residual min=-0.003696 max=0.002968 Jy/beam ! Clean residual mean=0.000400 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.291914 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 61 components and 0.291914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104065Jy sigma=0.000886 ! Fit after self-cal, rms=0.104062Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106639 Jy ! Component: 100 - total flux cleaned = 0.000107242 Jy ! Component: 150 - total flux cleaned = 0.000107667 Jy ! Component: 200 - total flux cleaned = 0.000108052 Jy ! Total flux subtracted in 200 components = 0.000108052 Jy ! Clean residual min=-0.003697 max=0.002937 Jy/beam ! Clean residual mean=0.000396 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.292022 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 63 components and 0.292022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104066Jy sigma=0.000886 ! Fit after self-cal, rms=0.104065Jy sigma=0.000886 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=8.14 mas, bpa=-0.5883 degrees ! Estimated noise=950.933 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.862 x 8.14 at -0.5883 degrees (North through East) ! Clean map min=-0.0031758 max=0.23906 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.687 mas, bpa=0.4895 degrees ! Estimated noise=1577.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.183438 Jy ! Component: 100 - total flux cleaned = 0.232857 Jy ! Component: 150 - total flux cleaned = 0.254994 Jy ! Component: 200 - total flux cleaned = 0.267618 Jy ! Total flux subtracted in 200 components = 0.267618 Jy ! Clean residual min=-0.006912 max=0.007586 Jy/beam ! Clean residual mean=0.000272 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.267618 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.267618 Jy ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=8.14 mas, bpa=-0.5883 degrees ! Estimated noise=950.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113327 Jy ! Component: 100 - total flux cleaned = 0.0171397 Jy ! Component: 150 - total flux cleaned = 0.0202285 Jy ! Component: 200 - total flux cleaned = 0.0219122 Jy ! Total flux subtracted in 200 components = 0.0219122 Jy ! Clean residual min=-0.003183 max=0.003151 Jy/beam ! Clean residual mean=0.000227 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.289531 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 0.289531 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.609 mas, bmaj=24.61 mas, bpa=3.387 degrees ! Estimated noise=1229.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143027 Jy ! Component: 100 - total flux cleaned = 0.0016764 Jy ! Component: 150 - total flux cleaned = 0.00172978 Jy ! Component: 200 - total flux cleaned = 0.00176268 Jy ! Total flux subtracted in 200 components = 0.00176268 Jy ! Clean residual min=-0.003727 max=0.003277 Jy/beam ! Clean residual mean=0.000429 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.291293 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.06356e-05 Jy ! Component: 100 - total flux cleaned = 6.03714e-05 Jy ! Component: 150 - total flux cleaned = 8.93615e-05 Jy ! Component: 200 - total flux cleaned = 0.000117637 Jy ! Total flux subtracted in 200 components = 0.000117637 Jy ! Clean residual min=-0.003717 max=0.003224 Jy/beam ! Clean residual mean=0.000423 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.291411 Jy ! Adding 5 model components to the UV plane model. ! The established model now contains 56 components and 0.291411 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=8.14 mas, bpa=-0.5883 degrees ! Estimated noise=950.933 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000373721 Jy ! Component: 100 - total flux cleaned = -0.000411029 Jy ! Component: 150 - total flux cleaned = -0.000350977 Jy ! Component: 200 - total flux cleaned = -0.000273063 Jy ! Total flux subtracted in 200 components = -0.000273063 Jy ! Clean residual min=-0.003190 max=0.003209 Jy/beam ! Clean residual mean=0.000193 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.291138 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 62 components and 0.291138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104076Jy sigma=0.000887 ! Fit after self-cal, rms=0.104067Jy sigma=0.000887 wmodel J1441-3456_S_2014_01_04_pus_map.mod ! Writing 62 model components to file: J1441-3456_S_2014_01_04_pus_map.mod wobs J1441-3456_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1441-3456_S_2014_01_04_pus_uvs.fits wwins J1441-3456_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1441-3456_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000473446 Jy ! Component: 100 - total flux cleaned = -0.000735869 Jy ! Component: 150 - total flux cleaned = -0.000883565 Jy ! Component: 200 - total flux cleaned = -0.0010228 Jy ! Component: 250 - total flux cleaned = -0.00119822 Jy ! Component: 300 - total flux cleaned = -0.00136483 Jy ! Component: 350 - total flux cleaned = -0.00144422 Jy ! Component: 400 - total flux cleaned = -0.00140619 Jy ! Component: 450 - total flux cleaned = -0.001333 Jy ! Component: 500 - total flux cleaned = -0.00122702 Jy ! Component: 550 - total flux cleaned = -0.00115925 Jy ! Component: 600 - total flux cleaned = -0.00106134 Jy ! Component: 650 - total flux cleaned = -0.000967524 Jy ! Component: 700 - total flux cleaned = -0.000845717 Jy ! Component: 750 - total flux cleaned = -0.0007267 Jy ! Component: 800 - total flux cleaned = -0.000697395 Jy ! Component: 850 - total flux cleaned = -0.000640484 Jy ! Component: 900 - total flux cleaned = -0.000722727 Jy ! Component: 950 - total flux cleaned = -0.000749242 Jy ! Component: 1000 - total flux cleaned = -0.000723087 Jy ! Component: 1050 - total flux cleaned = -0.000878686 Jy ! Component: 1100 - total flux cleaned = -0.000955288 Jy ! Component: 1150 - total flux cleaned = -0.00110519 Jy ! Component: 1200 - total flux cleaned = -0.00120324 Jy ! Component: 1250 - total flux cleaned = -0.00137182 Jy ! Component: 1300 - total flux cleaned = -0.00151406 Jy ! Component: 1350 - total flux cleaned = -0.00167743 Jy ! Component: 1400 - total flux cleaned = -0.00186158 Jy ! Component: 1450 - total flux cleaned = -0.00208857 Jy ! Component: 1500 - total flux cleaned = -0.00233457 Jy ! Component: 1550 - total flux cleaned = -0.00255538 Jy ! Component: 1600 - total flux cleaned = -0.00279526 Jy ! Component: 1650 - total flux cleaned = -0.00305389 Jy ! Component: 1700 - total flux cleaned = -0.0032883 Jy ! Component: 1750 - total flux cleaned = -0.00360494 Jy ! Component: 1800 - total flux cleaned = -0.00387697 Jy ! Component: 1850 - total flux cleaned = -0.00414688 Jy ! Component: 1900 - total flux cleaned = -0.00445582 Jy ! Component: 1950 - total flux cleaned = -0.00472148 Jy ! Component: 2000 - total flux cleaned = -0.00502558 Jy ! Component: 2050 - total flux cleaned = -0.00532752 Jy ! Component: 2100 - total flux cleaned = -0.00566745 Jy ! Component: 2150 - total flux cleaned = -0.00598549 Jy ! Component: 2200 - total flux cleaned = -0.00630133 Jy ! Component: 2250 - total flux cleaned = -0.00661559 Jy ! Component: 2300 - total flux cleaned = -0.00692813 Jy ! Component: 2350 - total flux cleaned = -0.00725869 Jy ! Component: 2400 - total flux cleaned = -0.0075685 Jy ! Component: 2450 - total flux cleaned = -0.00787701 Jy ! Component: 2500 - total flux cleaned = -0.00818451 Jy ! Component: 2550 - total flux cleaned = -0.00851008 Jy ! Component: 2600 - total flux cleaned = -0.00883456 Jy ! Component: 2650 - total flux cleaned = -0.00913909 Jy ! Component: 2700 - total flux cleaned = -0.00948066 Jy ! Component: 2750 - total flux cleaned = -0.00978337 Jy ! Component: 2800 - total flux cleaned = -0.0101043 Jy ! Component: 2850 - total flux cleaned = -0.0104243 Jy ! Component: 2900 - total flux cleaned = -0.010725 Jy ! Component: 2950 - total flux cleaned = -0.011044 Jy ! Component: 3000 - total flux cleaned = -0.0114003 Jy ! Component: 3050 - total flux cleaned = -0.0117003 Jy ! Component: 3100 - total flux cleaned = -0.0120375 Jy ! Component: 3150 - total flux cleaned = -0.0123746 Jy ! Component: 3200 - total flux cleaned = -0.0127117 Jy ! Component: 3250 - total flux cleaned = -0.0130489 Jy ! Component: 3300 - total flux cleaned = -0.0133675 Jy ! Component: 3350 - total flux cleaned = -0.0137425 Jy ! Component: 3400 - total flux cleaned = -0.0140802 Jy ! Component: 3450 - total flux cleaned = -0.0144184 Jy ! Component: 3500 - total flux cleaned = -0.014738 Jy ! Component: 3550 - total flux cleaned = -0.0150771 Jy ! Component: 3600 - total flux cleaned = -0.0154169 Jy ! Component: 3650 - total flux cleaned = -0.0157765 Jy ! Component: 3700 - total flux cleaned = -0.0161369 Jy ! Component: 3750 - total flux cleaned = -0.0164792 Jy ! Component: 3800 - total flux cleaned = -0.0168416 Jy ! Component: 3850 - total flux cleaned = -0.0172049 Jy ! Component: 3900 - total flux cleaned = -0.0175695 Jy ! Component: 3950 - total flux cleaned = -0.0179159 Jy ! Component: 4000 - total flux cleaned = -0.018302 Jy ! Component: 4050 - total flux cleaned = -0.0186702 Jy ! Total flux subtracted in 4096 components = -0.0190203 Jy ! Clean residual min=-0.001289 max=0.001053 Jy/beam ! Clean residual mean=-0.000072 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.272118 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 289 components and 0.272118 Jy ![Exited script file: muppet] wmap "J1441-3456_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.862 x 8.14 at -0.5883 degrees (North through East) ! Clean map min=-0.0034557 max=0.24024 Jy/beam ! Writing clean map to FITS file: J1441-3456_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.240242 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293571 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.366594 0.366594 0.733188 1.46638 2.93275 5.8655 11.731 23.462 46.924 93.848 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.862 x 8.14 at -0.5883 degrees (North through East) ! Clean map min=-0.0034557 max=0.24024 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1441-3456_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:30:03 2017