! Started logfile: J1441+6318_X_2015_01_23_pus_uvs.log on Sun Jan  1 22:17:34 2017
obs J1441+6318_X_2015_01_23_pus_uva.fits
! Reading UV FITS file: J1441+6318_X_2015_01_23_pus_uva.fits
! AN table 1: 116 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.866092 visibilities/baseline/integration-bin.
! Found source: J1441+6318
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 350 lines of history.
! 
! Reading 54252 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1441+6318_X_2015_01_23_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 82 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 136 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.899202Jy  sigma=0.010913
! Fit after  self-cal, rms=0.873809Jy  sigma=0.010613
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.836 mas, bmaj=0.9908 mas, bpa=80.45 degrees
! Estimated noise=806 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0927262 Jy
! Component: 100  -  total flux cleaned = 0.123182 Jy
! Total flux subtracted in 100 components = 0.123182 Jy
! Clean residual min=-0.006653 max=0.014004 Jy/beam
! Clean residual mean=-0.000051 rms=0.002066 Jy/beam
! Combined flux in latest and established models = 0.123182 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.123182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080872Jy  sigma=0.000927
! Fit after  self-cal, rms=0.080780Jy  sigma=0.000925
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015807 Jy
! Component: 100  -  total flux cleaned = 0.0253428 Jy
! Total flux subtracted in 100 components = 0.0253428 Jy
! Clean residual min=-0.005600 max=0.009096 Jy/beam
! Clean residual mean=-0.000012 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.148525 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.148525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075784Jy  sigma=0.000860
! Fit after  self-cal, rms=0.075729Jy  sigma=0.000859
! Inverting map 
! Added new window around map position (1.4, 0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927392 Jy
! Component: 100  -  total flux cleaned = 0.0148823 Jy
! Total flux subtracted in 100 components = 0.0148823 Jy
! Clean residual min=-0.005533 max=0.007908 Jy/beam
! Clean residual mean=0.000012 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.163407 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.163407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074134Jy  sigma=0.000840
! Fit after  self-cal, rms=0.073990Jy  sigma=0.000838
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=1.237 mas, bpa=79.74 degrees
! Estimated noise=257.963 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0076231 Jy
! Component: 100  -  total flux cleaned = 0.0121993 Jy
! Component: 150  -  total flux cleaned = 0.0151293 Jy
! Component: 200  -  total flux cleaned = 0.0168491 Jy
! Total flux subtracted in 200 components = 0.0168491 Jy
! Clean residual min=-0.007037 max=0.006901 Jy/beam
! Clean residual mean=0.000113 rms=0.001639 Jy/beam
! Combined flux in latest and established models = 0.180256 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 0.180256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073029Jy  sigma=0.000829
! Fit after  self-cal, rms=0.073001Jy  sigma=0.000828
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        1.04     KP        0.90     
!   LA        1.08     MK        0.94     NL        0.99     OV        0.96     
!   PT        0.99     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        1.05     KP        0.86     
!   LA        1.11     MK        0.95     NL        0.98     OV        0.97     
!   PT        0.94     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.10     HN        1.08     KP        0.80     
!   LA        1.11     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.92     SC        1.11     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.10     HN        1.06     KP        0.75     
!   LA        1.14     MK        0.98     NL        0.98     OV        0.96     
!   PT        0.95     SC        1.10     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.08     HN        1.06     KP        0.72     
!   LA        1.12     MK        1.04     NL        1.01     OV        0.97     
!   PT        0.94     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.06     KP        0.72     
!   LA        1.14     MK        0.98     NL        1.00     OV        0.99     
!   PT        0.93     SC        1.08     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.22     HN        1.12     KP        0.71     
!   LA        1.14     MK        1.04     NL        1.04     OV        1.05     
!   PT        1.02     SC        1.15     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.16     HN        1.15     KP        0.73     
!   LA        1.12     MK        0.99     NL        1.00     OV        1.02     
!   PT        0.96     SC        1.12     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        1.08     KP        0.74     
!   LA        1.15     MK        0.96     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.08     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.13     HN        1.12     KP        0.78     
!   LA        1.17     MK        1.02     NL        1.01     OV        1.00     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.14     HN        1.08     KP        0.79     
!   LA        1.16     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        1.07     KP        0.83     
!   LA        1.16     MK        0.99     NL        1.02     OV        1.01     
!   PT        0.97     SC        1.10     
! 
! 
! Fit before self-cal, rms=0.073001Jy  sigma=0.000828
! Fit after  self-cal, rms=0.070715Jy  sigma=0.000785
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=1.248 mas, bpa=82.01 degrees
! Estimated noise=260.399 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235554 Jy
! Component: 100  -  total flux cleaned = 0.00253841 Jy
! Component: 150  -  total flux cleaned = 0.00268158 Jy
! Component: 200  -  total flux cleaned = 0.00268118 Jy
! Total flux subtracted in 200 components = 0.00268118 Jy
! Clean residual min=-0.001658 max=0.001415 Jy/beam
! Clean residual mean=0.000001 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.182937 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 49 components and 0.182937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070413Jy  sigma=0.000782
! Fit after  self-cal, rms=0.070445Jy  sigma=0.000781
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070445Jy  sigma=0.000781
! Fit after  self-cal, rms=0.071254Jy  sigma=0.000780
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.251 mas, bpa=79.48 degrees
! Estimated noise=261.353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000528655 Jy
! Component: 100  -  total flux cleaned = 0.000485498 Jy
! Component: 150  -  total flux cleaned = 0.000334667 Jy
! Component: 200  -  total flux cleaned = 0.000235261 Jy
! Total flux subtracted in 200 components = 0.000235261 Jy
! Clean residual min=-0.000978 max=0.000884 Jy/beam
! Clean residual mean=-0.000007 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.183172 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.183172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071211Jy  sigma=0.000779
! Fit after  self-cal, rms=0.071216Jy  sigma=0.000779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.17083e-05 Jy
! Component: 100  -  total flux cleaned = 2.6657e-05 Jy
! Component: 150  -  total flux cleaned = 2.61164e-05 Jy
! Component: 200  -  total flux cleaned = 8.53195e-06 Jy
! Total flux subtracted in 200 components = 8.53195e-06 Jy
! Clean residual min=-0.000953 max=0.000840 Jy/beam
! Clean residual mean=-0.000006 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.183181 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.183181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071201Jy  sigma=0.000779
! Fit after  self-cal, rms=0.071199Jy  sigma=0.000779
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071199Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070985Jy  sigma=0.000779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.247 mas, bpa=80.3 degrees
! Estimated noise=260.727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000375075 Jy
! Component: 100  -  total flux cleaned = 0.000375924 Jy
! Component: 150  -  total flux cleaned = 0.000360925 Jy
! Component: 200  -  total flux cleaned = 0.000361375 Jy
! Total flux subtracted in 200 components = 0.000361375 Jy
! Clean residual min=-0.000896 max=0.000809 Jy/beam
! Clean residual mean=-0.000005 rms=0.000219 Jy/beam
! Combined flux in latest and established models = 0.183542 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.183542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070975Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070974Jy  sigma=0.000779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.46932e-05 Jy
! Component: 100  -  total flux cleaned = 3.49571e-05 Jy
! Component: 150  -  total flux cleaned = 3.49631e-05 Jy
! Component: 200  -  total flux cleaned = 2.35883e-05 Jy
! Total flux subtracted in 200 components = 2.35883e-05 Jy
! Clean residual min=-0.000886 max=0.000801 Jy/beam
! Clean residual mean=-0.000005 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.183566 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 74 components and 0.183566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070969Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070968Jy  sigma=0.000779
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070968Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070866Jy  sigma=0.000779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.293 mas, bmaj=2.798 mas, bpa=82.2 degrees
! Estimated noise=321.735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000227468 Jy
! Component: 100  -  total flux cleaned = 0.000314322 Jy
! Component: 150  -  total flux cleaned = 0.000379247 Jy
! Component: 200  -  total flux cleaned = 0.000418349 Jy
! Total flux subtracted in 200 components = 0.000418349 Jy
! Clean residual min=-0.000742 max=0.000700 Jy/beam
! Clean residual mean=-0.000011 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.183984 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 81 components and 0.183984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070866Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070864Jy  sigma=0.000779
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.35988e-06 Jy
! Component: 100  -  total flux cleaned = 2.93864e-05 Jy
! Component: 150  -  total flux cleaned = 5.3139e-05 Jy
! Component: 200  -  total flux cleaned = 6.97749e-05 Jy
! Total flux subtracted in 200 components = 6.97749e-05 Jy
! Clean residual min=-0.000738 max=0.000690 Jy/beam
! Clean residual mean=-0.000011 rms=0.000233 Jy/beam
! Combined flux in latest and established models = 0.184054 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 84 components and 0.184054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070864Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070864Jy  sigma=0.000779
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.245 mas, bpa=80.82 degrees
! Estimated noise=260.419 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.064 x 1.245 at 80.82 degrees (North through East)
! Clean map  min=-0.0010851  max=0.12052 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8445 mas, bmaj=0.9924 mas, bpa=82.71 degrees
! Estimated noise=823.958 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0945776 Jy
! Component: 100  -  total flux cleaned = 0.126489 Jy
! Component: 150  -  total flux cleaned = 0.143323 Jy
! Component: 200  -  total flux cleaned = 0.154086 Jy
! Total flux subtracted in 200 components = 0.154086 Jy
! Clean residual min=-0.003618 max=0.005908 Jy/beam
! Clean residual mean=-0.000044 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 0.154086 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.154086 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.245 mas, bpa=80.82 degrees
! Estimated noise=260.419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110825 Jy
! Component: 100  -  total flux cleaned = 0.0177534 Jy
! Component: 150  -  total flux cleaned = 0.0220301 Jy
! Component: 200  -  total flux cleaned = 0.0248653 Jy
! Total flux subtracted in 200 components = 0.0248653 Jy
! Clean residual min=-0.001235 max=0.001770 Jy/beam
! Clean residual mean=-0.000025 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.178952 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 47 components and 0.178952 Jy
! Inverting map 
! Added new window around map position (2.2, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200589 Jy
! Component: 100  -  total flux cleaned = 0.00339526 Jy
! Component: 150  -  total flux cleaned = 0.00420608 Jy
! Component: 200  -  total flux cleaned = 0.00448919 Jy
! Total flux subtracted in 200 components = 0.00448919 Jy
! Clean residual min=-0.000930 max=0.000892 Jy/beam
! Clean residual mean=-0.000007 rms=0.000225 Jy/beam
! Combined flux in latest and established models = 0.183441 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 65 components and 0.183441 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.293 mas, bmaj=2.798 mas, bpa=82.2 degrees
! Estimated noise=321.735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00063297 Jy
! Component: 100  -  total flux cleaned = 0.000711437 Jy
! Component: 150  -  total flux cleaned = 0.000772411 Jy
! Component: 200  -  total flux cleaned = 0.00078267 Jy
! Total flux subtracted in 200 components = 0.00078267 Jy
! Clean residual min=-0.000739 max=0.000677 Jy/beam
! Clean residual mean=-0.000009 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.184224 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.75471e-08 Jy
! Component: 100  -  total flux cleaned = -8.14498e-06 Jy
! Component: 150  -  total flux cleaned = -1.57196e-05 Jy
! Component: 200  -  total flux cleaned = -2.28682e-05 Jy
! Total flux subtracted in 200 components = -2.28682e-05 Jy
! Clean residual min=-0.000734 max=0.000649 Jy/beam
! Clean residual mean=-0.000009 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.184201 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.184201 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.245 mas, bpa=80.82 degrees
! Estimated noise=260.419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.44218e-05 Jy
! Component: 100  -  total flux cleaned = -0.0001169 Jy
! Component: 150  -  total flux cleaned = -9.87659e-05 Jy
! Component: 200  -  total flux cleaned = -9.92277e-05 Jy
! Total flux subtracted in 200 components = -9.92277e-05 Jy
! Clean residual min=-0.000806 max=0.000810 Jy/beam
! Clean residual mean=-0.000004 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.184102 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 0.184102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070855Jy  sigma=0.000779
! Fit after  self-cal, rms=0.070852Jy  sigma=0.000779
wmodel J1441+6318_X_2015_01_23_pus_map.mod
! Writing 93 model components to file: J1441+6318_X_2015_01_23_pus_map.mod
wobs J1441+6318_X_2015_01_23_pus_uvs.fits
! Writing UV FITS file: J1441+6318_X_2015_01_23_pus_uvs.fits
wwins J1441+6318_X_2015_01_23_pus_map.win
! wwins: Wrote 4 windows to J1441+6318_X_2015_01_23_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000112405 Jy
! Component: 100  -  total flux cleaned = -3.88065e-05 Jy
! Component: 150  -  total flux cleaned = -0.000180597 Jy
! Component: 200  -  total flux cleaned = -0.000254555 Jy
! Component: 250  -  total flux cleaned = -0.000301857 Jy
! Component: 300  -  total flux cleaned = -0.000336457 Jy
! Component: 350  -  total flux cleaned = -0.000392187 Jy
! Component: 400  -  total flux cleaned = -0.00044597 Jy
! Component: 450  -  total flux cleaned = -0.000487845 Jy
! Component: 500  -  total flux cleaned = -0.00053935 Jy
! Component: 550  -  total flux cleaned = -0.000609238 Jy
! Component: 600  -  total flux cleaned = -0.000657823 Jy
! Component: 650  -  total flux cleaned = -0.00066721 Jy
! Component: 700  -  total flux cleaned = -0.00068608 Jy
! Component: 750  -  total flux cleaned = -0.000741711 Jy
! Component: 800  -  total flux cleaned = -0.00078715 Jy
! Component: 850  -  total flux cleaned = -0.00081386 Jy
! Component: 900  -  total flux cleaned = -0.000831491 Jy
! Component: 950  -  total flux cleaned = -0.000857487 Jy
! Component: 1000  -  total flux cleaned = -0.000882982 Jy
! Component: 1050  -  total flux cleaned = -0.000899741 Jy
! Component: 1100  -  total flux cleaned = -0.000916341 Jy
! Component: 1150  -  total flux cleaned = -0.000908108 Jy
! Component: 1200  -  total flux cleaned = -0.000900036 Jy
! Component: 1250  -  total flux cleaned = -0.000924114 Jy
! Component: 1300  -  total flux cleaned = -0.000916185 Jy
! Component: 1350  -  total flux cleaned = -0.000924049 Jy
! Component: 1400  -  total flux cleaned = -0.000962509 Jy
! Component: 1450  -  total flux cleaned = -0.000916725 Jy
! Component: 1500  -  total flux cleaned = -0.000939354 Jy
! Component: 1550  -  total flux cleaned = -0.000924384 Jy
! Component: 1600  -  total flux cleaned = -0.000931792 Jy
! Component: 1650  -  total flux cleaned = -0.000931796 Jy
! Component: 1700  -  total flux cleaned = -0.000939011 Jy
! Component: 1750  -  total flux cleaned = -0.000924792 Jy
! Component: 1800  -  total flux cleaned = -0.000946065 Jy
! Component: 1850  -  total flux cleaned = -0.000932107 Jy
! Component: 1900  -  total flux cleaned = -0.000959788 Jy
! Component: 1950  -  total flux cleaned = -0.00095974 Jy
! Component: 2000  -  total flux cleaned = -0.000973338 Jy
! Total flux subtracted in 2048 components = -0.000973369 Jy
! Clean residual min=-0.000382 max=0.000359 Jy/beam
! Clean residual mean=-0.000002 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.183128 Jy
keep
! Adding 144 model components to the UV plane model.
! The established model now contains 237 components and 0.183128 Jy
![Exited script file: muppet]
wmap "J1441+6318_X_2015_01_23_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.064 x 1.245 at 80.82 degrees (North through East)
! Clean map  min=-0.00071886  max=0.12098 Jy/beam
! Writing clean map to FITS file: J1441+6318_X_2015_01_23_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.120983 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000120746 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.299412 0.299412 0.598824 1.19765 2.3953 4.79059 9.58119 19.1624 38.3247 76.6495
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.12 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.064 x 1.245 at 80.82 degrees (North through East)
! Clean map  min=-0.00071886  max=0.12098 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1441+6318_X_2015_01_23_pus_uvs.log closed on Sun Jan  1 22:17:37 2017