! Started logfile: J1440+0157_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:44 2017 obs J1440+0157_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1440+0157_S_2014_01_04_pus_uva.fits ! AN table 1: 75 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.59963 visibilities/baseline/integration-bin. ! Found source: J1440+0157 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 6476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1440+0157_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.850822Jy sigma=0.011931 ! Fit after self-cal, rms=0.842189Jy sigma=0.011812 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=6.274 mas, bpa=-6.222 degrees ! Estimated noise=1086.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119224 Jy ! Component: 100 - total flux cleaned = 0.148872 Jy ! Total flux subtracted in 100 components = 0.148872 Jy ! Clean residual min=-0.010390 max=0.014025 Jy/beam ! Clean residual mean=-0.000058 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 0.148872 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.148872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078788Jy sigma=0.000980 ! Fit after self-cal, rms=0.078765Jy sigma=0.000980 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=7.076 mas, bpa=-4.736 degrees ! Estimated noise=660.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, -14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166315 Jy ! Component: 100 - total flux cleaned = 0.0256669 Jy ! Component: 150 - total flux cleaned = 0.0316732 Jy ! Component: 200 - total flux cleaned = 0.0359214 Jy ! Total flux subtracted in 200 components = 0.0359214 Jy ! Clean residual min=-0.004922 max=0.004751 Jy/beam ! Clean residual mean=-0.000044 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.184793 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.184793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074386Jy sigma=0.000935 ! Fit after self-cal, rms=0.074120Jy sigma=0.000933 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.82 KP 1.00* LA 1.03 ! MK 0.95 NL 0.99 OV 0.96 PT 1.01 ! SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 KP 1.00* LA 0.99 ! MK 0.99 NL 1.02 OV 0.98 PT 1.01 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.08 KP 1.00* LA 0.83 ! MK 1.02 NL 1.01 OV 0.91 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.93 KP 1.00* LA 0.90 ! MK 1.08 NL 1.10 OV 0.99 PT 1.01 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.074120Jy sigma=0.000933 ! Fit after self-cal, rms=0.069528Jy sigma=0.000904 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=7.142 mas, bpa=-4.068 degrees ! Estimated noise=655.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120204 Jy ! Component: 100 - total flux cleaned = 0.00156159 Jy ! Component: 150 - total flux cleaned = 0.00174089 Jy ! Component: 200 - total flux cleaned = 0.00171073 Jy ! Total flux subtracted in 200 components = 0.00171073 Jy ! Clean residual min=-0.002379 max=0.002462 Jy/beam ! Clean residual mean=0.000004 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.186504 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.186504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069471Jy sigma=0.000904 ! Fit after self-cal, rms=0.069271Jy sigma=0.000903 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069271Jy sigma=0.000903 ! Fit after self-cal, rms=0.069432Jy sigma=0.000902 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=7.142 mas, bpa=-4.113 degrees ! Estimated noise=655.331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000339179 Jy ! Component: 100 - total flux cleaned = 0.000306964 Jy ! Component: 150 - total flux cleaned = 0.00025109 Jy ! Component: 200 - total flux cleaned = 0.000251287 Jy ! Total flux subtracted in 200 components = 0.000251287 Jy ! Clean residual min=-0.002379 max=0.002138 Jy/beam ! Clean residual mean=-0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.186755 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 0.186755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069404Jy sigma=0.000901 ! Fit after self-cal, rms=0.069418Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000103736 Jy ! Component: 100 - total flux cleaned = 8.20503e-05 Jy ! Component: 150 - total flux cleaned = 0.000102352 Jy ! Component: 200 - total flux cleaned = 8.29605e-05 Jy ! Total flux subtracted in 200 components = 8.29605e-05 Jy ! Clean residual min=-0.002370 max=0.002122 Jy/beam ! Clean residual mean=-0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.186838 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.186838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069403Jy sigma=0.000901 ! Fit after self-cal, rms=0.069404Jy sigma=0.000901 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069404Jy sigma=0.000901 ! Fit after self-cal, rms=0.069508Jy sigma=0.000901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=7.146 mas, bpa=-4.17 degrees ! Estimated noise=655.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.35043e-05 Jy ! Component: 100 - total flux cleaned = 8.44579e-05 Jy ! Component: 150 - total flux cleaned = 8.53876e-05 Jy ! Component: 200 - total flux cleaned = 0.000103509 Jy ! Total flux subtracted in 200 components = 0.000103509 Jy ! Clean residual min=-0.002361 max=0.002081 Jy/beam ! Clean residual mean=-0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.186942 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.186942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069496Jy sigma=0.000901 ! Fit after self-cal, rms=0.069497Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17668e-05 Jy ! Component: 100 - total flux cleaned = 4.23205e-05 Jy ! Component: 150 - total flux cleaned = 4.29044e-05 Jy ! Component: 200 - total flux cleaned = 5.70281e-05 Jy ! Total flux subtracted in 200 components = 5.70281e-05 Jy ! Clean residual min=-0.002350 max=0.002073 Jy/beam ! Clean residual mean=-0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.186999 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.186999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069489Jy sigma=0.000901 ! Fit after self-cal, rms=0.069490Jy sigma=0.000901 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069490Jy sigma=0.000901 ! Fit after self-cal, rms=0.069527Jy sigma=0.000901 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.164 mas, bmaj=11.51 mas, bpa=7.577 degrees ! Estimated noise=791.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198861 Jy ! Component: 100 - total flux cleaned = 0.000210276 Jy ! Component: 150 - total flux cleaned = 0.00021895 Jy ! Component: 200 - total flux cleaned = 0.000218743 Jy ! Total flux subtracted in 200 components = 0.000218743 Jy ! Clean residual min=-0.002377 max=0.002595 Jy/beam ! Clean residual mean=-0.000004 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.187217 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.187217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069524Jy sigma=0.000901 ! Fit after self-cal, rms=0.069520Jy sigma=0.000901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.52353e-05 Jy ! Component: 100 - total flux cleaned = 9.03188e-05 Jy ! Component: 150 - total flux cleaned = 8.36734e-05 Jy ! Component: 200 - total flux cleaned = 7.71763e-05 Jy ! Total flux subtracted in 200 components = 7.71763e-05 Jy ! Clean residual min=-0.002360 max=0.002602 Jy/beam ! Clean residual mean=-0.000003 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.187295 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.187295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069519Jy sigma=0.000901 ! Fit after self-cal, rms=0.069520Jy sigma=0.000901 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=7.149 mas, bpa=-4.213 degrees ! Estimated noise=655.804 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.565 x 7.149 at -4.213 degrees (North through East) ! Clean map min=-0.0022686 max=0.15367 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=6.317 mas, bpa=-5.34 degrees ! Estimated noise=1090.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119549 Jy ! Component: 100 - total flux cleaned = 0.148483 Jy ! Component: 150 - total flux cleaned = 0.162239 Jy ! Component: 200 - total flux cleaned = 0.170072 Jy ! Total flux subtracted in 200 components = 0.170072 Jy ! Clean residual min=-0.005004 max=0.004620 Jy/beam ! Clean residual mean=-0.000022 rms=0.001215 Jy/beam ! Combined flux in latest and established models = 0.170072 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.170072 Jy ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=7.149 mas, bpa=-4.213 degrees ! Estimated noise=655.804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548474 Jy ! Component: 100 - total flux cleaned = 0.00858383 Jy ! Component: 150 - total flux cleaned = 0.0107794 Jy ! Component: 200 - total flux cleaned = 0.012424 Jy ! Total flux subtracted in 200 components = 0.012424 Jy ! Clean residual min=-0.002491 max=0.002069 Jy/beam ! Clean residual mean=-0.000016 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.182496 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 36 components and 0.182496 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.164 mas, bmaj=11.51 mas, bpa=7.577 degrees ! Estimated noise=791.288 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148067 Jy ! Component: 100 - total flux cleaned = 0.00240837 Jy ! Component: 150 - total flux cleaned = 0.00303853 Jy ! Component: 200 - total flux cleaned = 0.00326118 Jy ! Total flux subtracted in 200 components = 0.00326118 Jy ! Clean residual min=-0.002423 max=0.002547 Jy/beam ! Clean residual mean=-0.000012 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.185757 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120246 Jy ! Component: 100 - total flux cleaned = 0.000238564 Jy ! Component: 150 - total flux cleaned = 0.000328236 Jy ! Component: 200 - total flux cleaned = 0.000406816 Jy ! Total flux subtracted in 200 components = 0.000406816 Jy ! Clean residual min=-0.002411 max=0.002515 Jy/beam ! Clean residual mean=-0.000010 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.186164 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 69 components and 0.186164 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=7.149 mas, bpa=-4.213 degrees ! Estimated noise=655.804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104403 Jy ! Component: 100 - total flux cleaned = 0.000103743 Jy ! Component: 150 - total flux cleaned = 0.000134269 Jy ! Component: 200 - total flux cleaned = 0.000163058 Jy ! Total flux subtracted in 200 components = 0.000163058 Jy ! Clean residual min=-0.002308 max=0.002137 Jy/beam ! Clean residual mean=-0.000005 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.186327 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.186327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069555Jy sigma=0.000901 ! Fit after self-cal, rms=0.069571Jy sigma=0.000901 wmodel J1440+0157_S_2014_01_04_pus_map.mod ! Writing 88 model components to file: J1440+0157_S_2014_01_04_pus_map.mod wobs J1440+0157_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1440+0157_S_2014_01_04_pus_uvs.fits wwins J1440+0157_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1440+0157_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429831 Jy ! Component: 100 - total flux cleaned = -0.000825796 Jy ! Component: 150 - total flux cleaned = -0.0012638 Jy ! Component: 200 - total flux cleaned = -0.00161482 Jy ! Component: 250 - total flux cleaned = -0.0018898 Jy ! Component: 300 - total flux cleaned = -0.00212319 Jy ! Component: 350 - total flux cleaned = -0.00229044 Jy ! Component: 400 - total flux cleaned = -0.00242404 Jy ! Component: 450 - total flux cleaned = -0.00252792 Jy ! Component: 500 - total flux cleaned = -0.00257877 Jy ! Component: 550 - total flux cleaned = -0.00260349 Jy ! Component: 600 - total flux cleaned = -0.00262685 Jy ! Component: 650 - total flux cleaned = -0.00260403 Jy ! Component: 700 - total flux cleaned = -0.00262667 Jy ! Component: 750 - total flux cleaned = -0.00260505 Jy ! Component: 800 - total flux cleaned = -0.00258402 Jy ! Component: 850 - total flux cleaned = -0.00258441 Jy ! Component: 900 - total flux cleaned = -0.00258501 Jy ! Component: 950 - total flux cleaned = -0.00254529 Jy ! Component: 1000 - total flux cleaned = -0.00244755 Jy ! Component: 1050 - total flux cleaned = -0.00240955 Jy ! Component: 1100 - total flux cleaned = -0.00240975 Jy ! Component: 1150 - total flux cleaned = -0.00240987 Jy ! Component: 1200 - total flux cleaned = -0.00237364 Jy ! Component: 1250 - total flux cleaned = -0.00233791 Jy ! Component: 1300 - total flux cleaned = -0.00230302 Jy ! Component: 1350 - total flux cleaned = -0.00223371 Jy ! Component: 1400 - total flux cleaned = -0.0021486 Jy ! Component: 1450 - total flux cleaned = -0.00209829 Jy ! Component: 1500 - total flux cleaned = -0.00201531 Jy ! Component: 1550 - total flux cleaned = -0.00191736 Jy ! Component: 1600 - total flux cleaned = -0.00185294 Jy ! Component: 1650 - total flux cleaned = -0.00178925 Jy ! Component: 1700 - total flux cleaned = -0.00166368 Jy ! Component: 1750 - total flux cleaned = -0.00163284 Jy ! Component: 1800 - total flux cleaned = -0.00157161 Jy ! Component: 1850 - total flux cleaned = -0.00154122 Jy ! Component: 1900 - total flux cleaned = -0.00143679 Jy ! Component: 1950 - total flux cleaned = -0.00137805 Jy ! Component: 2000 - total flux cleaned = -0.00136346 Jy ! Component: 2050 - total flux cleaned = -0.00127707 Jy ! Component: 2100 - total flux cleaned = -0.00117761 Jy ! Component: 2150 - total flux cleaned = -0.00112159 Jy ! Component: 2200 - total flux cleaned = -0.0010937 Jy ! Component: 2250 - total flux cleaned = -0.00102513 Jy ! Component: 2300 - total flux cleaned = -0.0009574 Jy ! Component: 2350 - total flux cleaned = -0.000930642 Jy ! Component: 2400 - total flux cleaned = -0.000917239 Jy ! Component: 2450 - total flux cleaned = -0.000851618 Jy ! Component: 2500 - total flux cleaned = -0.000825596 Jy ! Component: 2550 - total flux cleaned = -0.000787244 Jy ! Component: 2600 - total flux cleaned = -0.000711236 Jy ! Component: 2650 - total flux cleaned = -0.000686343 Jy ! Component: 2700 - total flux cleaned = -0.000636498 Jy ! Component: 2750 - total flux cleaned = -0.00059957 Jy ! Component: 2800 - total flux cleaned = -0.000551037 Jy ! Component: 2850 - total flux cleaned = -0.000514891 Jy ! Component: 2900 - total flux cleaned = -0.00046716 Jy ! Component: 2950 - total flux cleaned = -0.000467208 Jy ! Component: 3000 - total flux cleaned = -0.00043207 Jy ! Component: 3050 - total flux cleaned = -0.00037402 Jy ! Component: 3100 - total flux cleaned = -0.000328161 Jy ! Component: 3150 - total flux cleaned = -0.000316821 Jy ! Component: 3200 - total flux cleaned = -0.000294109 Jy ! Component: 3250 - total flux cleaned = -0.000260445 Jy ! Component: 3300 - total flux cleaned = -0.00021605 Jy ! Component: 3350 - total flux cleaned = -0.000194117 Jy ! Component: 3400 - total flux cleaned = -0.000194068 Jy ! Component: 3450 - total flux cleaned = -0.000172392 Jy ! Component: 3500 - total flux cleaned = -0.000183038 Jy ! Component: 3550 - total flux cleaned = -0.000151135 Jy ! Component: 3600 - total flux cleaned = -0.000182863 Jy ! Component: 3650 - total flux cleaned = -0.000151285 Jy ! Component: 3700 - total flux cleaned = -0.000192921 Jy ! Component: 3750 - total flux cleaned = -0.000172175 Jy ! Component: 3800 - total flux cleaned = -0.000161918 Jy ! Component: 3850 - total flux cleaned = -0.00015168 Jy ! Component: 3900 - total flux cleaned = -0.000121228 Jy ! Component: 3950 - total flux cleaned = -0.00010102 Jy ! Component: 4000 - total flux cleaned = -0.000101052 Jy ! Component: 4050 - total flux cleaned = -9.11019e-05 Jy ! Total flux subtracted in 4096 components = -6.14429e-05 Jy ! Clean residual min=-0.000495 max=0.000594 Jy/beam ! Clean residual mean=-0.000001 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.186266 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 336 components and 0.186265 Jy ![Exited script file: muppet] wmap "J1440+0157_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.565 x 7.149 at -4.213 degrees (North through East) ! Clean map min=-0.0018202 max=0.15498 Jy/beam ! Writing clean map to FITS file: J1440+0157_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.154975 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000159988 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309703 0.309703 0.619406 1.23881 2.47763 4.95525 9.9105 19.821 39.642 79.284 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.154 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.565 x 7.149 at -4.213 degrees (North through East) ! Clean map min=-0.0018202 max=0.15498 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1440+0157_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:48 2017