! Started logfile: J1440+0127_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:38 2017 obs J1440+0127_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1440+0127_S_2014_01_04_pus_uva.fits ! AN table 1: 108 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1440+0127 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1440+0127_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959700Jy sigma=0.013346 ! Fit after self-cal, rms=0.935934Jy sigma=0.012975 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=6.514 mas, bpa=-5.164 degrees ! Estimated noise=751.506 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050962 Jy ! Component: 100 - total flux cleaned = 0.062414 Jy ! Total flux subtracted in 100 components = 0.062414 Jy ! Clean residual min=-0.003180 max=0.003906 Jy/beam ! Clean residual mean=-0.000015 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.062414 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.062414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070931Jy sigma=0.000893 ! Fit after self-cal, rms=0.070875Jy sigma=0.000892 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=7.122 mas, bpa=-5.03 degrees ! Estimated noise=551.465 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475122 Jy ! Component: 100 - total flux cleaned = 0.00664194 Jy ! Component: 150 - total flux cleaned = 0.00770813 Jy ! Component: 200 - total flux cleaned = 0.00811122 Jy ! Total flux subtracted in 200 components = 0.00811122 Jy ! Clean residual min=-0.002471 max=0.001859 Jy/beam ! Clean residual mean=-0.000016 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0705253 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 19 components and 0.0705253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070566Jy sigma=0.000889 ! Fit after self-cal, rms=0.070618Jy sigma=0.000888 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 KP 1.00* LA 1.05 ! MK 0.99 NL 0.99 OV 0.95 PT 1.04 ! SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 KP 1.00* LA 1.12 ! MK 0.99 NL 1.06 OV 1.04 PT 0.97 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.19 KP 1.00* LA 0.84 ! MK 0.99 NL 0.98 OV 0.94 PT 1.02 ! SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 KP 1.00* LA 0.92 ! MK 1.01 NL 1.14 OV 1.04 PT 1.05 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.070618Jy sigma=0.000888 ! Fit after self-cal, rms=0.070278Jy sigma=0.000884 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=7.1 mas, bpa=-5.052 degrees ! Estimated noise=552.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000636047 Jy ! Component: 100 - total flux cleaned = 0.000693751 Jy ! Component: 150 - total flux cleaned = 0.000726823 Jy ! Component: 200 - total flux cleaned = 0.000772366 Jy ! Total flux subtracted in 200 components = 0.000772366 Jy ! Clean residual min=-0.001967 max=0.001646 Jy/beam ! Clean residual mean=-0.000014 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0712976 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0712976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070264Jy sigma=0.000884 ! Fit after self-cal, rms=0.070385Jy sigma=0.000884 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070385Jy sigma=0.000884 ! Fit after self-cal, rms=0.070455Jy sigma=0.000883 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.566 mas, bmaj=7.089 mas, bpa=-4.982 degrees ! Estimated noise=553.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217893 Jy ! Component: 100 - total flux cleaned = 0.000306184 Jy ! Component: 150 - total flux cleaned = 0.000332114 Jy ! Component: 200 - total flux cleaned = 0.000356056 Jy ! Total flux subtracted in 200 components = 0.000356056 Jy ! Clean residual min=-0.001877 max=0.001530 Jy/beam ! Clean residual mean=-0.000011 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 0.0716537 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0716537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070448Jy sigma=0.000883 ! Fit after self-cal, rms=0.070454Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.69054e-05 Jy ! Component: 100 - total flux cleaned = 9.13192e-05 Jy ! Component: 150 - total flux cleaned = 0.000113957 Jy ! Component: 200 - total flux cleaned = 0.000134939 Jy ! Total flux subtracted in 200 components = 0.000134939 Jy ! Clean residual min=-0.001865 max=0.001511 Jy/beam ! Clean residual mean=-0.000010 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0717886 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0717886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070450Jy sigma=0.000883 ! Fit after self-cal, rms=0.070456Jy sigma=0.000883 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070456Jy sigma=0.000883 ! Fit after self-cal, rms=0.070501Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=7.082 mas, bpa=-4.853 degrees ! Estimated noise=554.329 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024756 Jy ! Component: 100 - total flux cleaned = 0.000291519 Jy ! Component: 150 - total flux cleaned = 0.000311376 Jy ! Component: 200 - total flux cleaned = 0.000330124 Jy ! Total flux subtracted in 200 components = 0.000330124 Jy ! Clean residual min=-0.001863 max=0.001487 Jy/beam ! Clean residual mean=-0.000010 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0721187 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 37 components and 0.0721187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070497Jy sigma=0.000883 ! Fit after self-cal, rms=0.070501Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.69612e-05 Jy ! Component: 100 - total flux cleaned = 5.57978e-05 Jy ! Component: 150 - total flux cleaned = 6.49201e-05 Jy ! Component: 200 - total flux cleaned = 8.14664e-05 Jy ! Total flux subtracted in 200 components = 8.14664e-05 Jy ! Clean residual min=-0.001856 max=0.001477 Jy/beam ! Clean residual mean=-0.000010 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0722002 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.0722002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070498Jy sigma=0.000883 ! Fit after self-cal, rms=0.070501Jy sigma=0.000883 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070501Jy sigma=0.000883 ! Fit after self-cal, rms=0.070527Jy sigma=0.000883 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=11.37 mas, bpa=9.299 degrees ! Estimated noise=676.373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308992 Jy ! Component: 100 - total flux cleaned = 0.000331827 Jy ! Component: 150 - total flux cleaned = 0.000365435 Jy ! Component: 200 - total flux cleaned = 0.00039296 Jy ! Total flux subtracted in 200 components = 0.00039296 Jy ! Clean residual min=-0.001841 max=0.001185 Jy/beam ! Clean residual mean=-0.000018 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0725932 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0725932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070529Jy sigma=0.000883 ! Fit after self-cal, rms=0.070500Jy sigma=0.000883 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.79781e-05 Jy ! Component: 100 - total flux cleaned = 9.46848e-05 Jy ! Component: 150 - total flux cleaned = 9.93919e-05 Jy ! Component: 200 - total flux cleaned = 0.000109899 Jy ! Total flux subtracted in 200 components = 0.000109899 Jy ! Clean residual min=-0.001830 max=0.001162 Jy/beam ! Clean residual mean=-0.000018 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0727031 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 52 components and 0.0727031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070500Jy sigma=0.000883 ! Fit after self-cal, rms=0.070491Jy sigma=0.000883 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.074 mas, bpa=-4.746 degrees ! Estimated noise=554.967 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.558 x 7.074 at -4.746 degrees (North through East) ! Clean map min=-0.0017975 max=0.06536 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.07 mas, bmaj=6.471 mas, bpa=-4.986 degrees ! Estimated noise=762.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516291 Jy ! Component: 100 - total flux cleaned = 0.0637705 Jy ! Component: 150 - total flux cleaned = 0.0682224 Jy ! Component: 200 - total flux cleaned = 0.0704279 Jy ! Total flux subtracted in 200 components = 0.0704279 Jy ! Clean residual min=-0.002389 max=0.001934 Jy/beam ! Clean residual mean=-0.000006 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0704279 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0704279 Jy ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.074 mas, bpa=-4.746 degrees ! Estimated noise=554.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105239 Jy ! Component: 100 - total flux cleaned = 0.00129437 Jy ! Component: 150 - total flux cleaned = 0.00133888 Jy ! Component: 200 - total flux cleaned = 0.00137921 Jy ! Total flux subtracted in 200 components = 0.00137921 Jy ! Clean residual min=-0.001930 max=0.001492 Jy/beam ! Clean residual mean=-0.000012 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.0718071 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0718071 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.122 mas, bmaj=11.37 mas, bpa=9.299 degrees ! Estimated noise=676.373 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397202 Jy ! Component: 100 - total flux cleaned = 0.000461908 Jy ! Component: 150 - total flux cleaned = 0.000512145 Jy ! Component: 200 - total flux cleaned = 0.000545794 Jy ! Total flux subtracted in 200 components = 0.000545794 Jy ! Clean residual min=-0.001849 max=0.001242 Jy/beam ! Clean residual mean=-0.000020 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0723529 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75598e-05 Jy ! Component: 100 - total flux cleaned = 3.74003e-05 Jy ! Component: 150 - total flux cleaned = 5.54948e-05 Jy ! Component: 200 - total flux cleaned = 6.78527e-05 Jy ! Total flux subtracted in 200 components = 6.78527e-05 Jy ! Clean residual min=-0.001846 max=0.001238 Jy/beam ! Clean residual mean=-0.000020 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0724208 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0724208 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=7.074 mas, bpa=-4.746 degrees ! Estimated noise=554.967 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011099 Jy ! Component: 100 - total flux cleaned = -0.000187567 Jy ! Component: 150 - total flux cleaned = -0.000237722 Jy ! Component: 200 - total flux cleaned = -0.000223648 Jy ! Total flux subtracted in 200 components = -0.000223648 Jy ! Clean residual min=-0.001907 max=0.001442 Jy/beam ! Clean residual mean=-0.000011 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0721971 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.0721971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070494Jy sigma=0.000883 ! Fit after self-cal, rms=0.070489Jy sigma=0.000883 wmodel J1440+0127_S_2014_01_04_pus_map.mod ! Writing 40 model components to file: J1440+0127_S_2014_01_04_pus_map.mod wobs J1440+0127_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1440+0127_S_2014_01_04_pus_uvs.fits wwins J1440+0127_S_2014_01_04_pus_map.win ! wwins: Wrote 1 windows to J1440+0127_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829941 Jy ! Component: 100 - total flux cleaned = -0.00142325 Jy ! Component: 150 - total flux cleaned = -0.00173181 Jy ! Component: 200 - total flux cleaned = -0.00204496 Jy ! Component: 250 - total flux cleaned = -0.00222767 Jy ! Component: 300 - total flux cleaned = -0.00244597 Jy ! Component: 350 - total flux cleaned = -0.00259281 Jy ! Component: 400 - total flux cleaned = -0.00271425 Jy ! Component: 450 - total flux cleaned = -0.00277272 Jy ! Component: 500 - total flux cleaned = -0.00286701 Jy ! Component: 550 - total flux cleaned = -0.00295846 Jy ! Component: 600 - total flux cleaned = -0.00302973 Jy ! Component: 650 - total flux cleaned = -0.00309896 Jy ! Component: 700 - total flux cleaned = -0.00314964 Jy ! Component: 750 - total flux cleaned = -0.00319929 Jy ! Component: 800 - total flux cleaned = -0.00316711 Jy ! Component: 850 - total flux cleaned = -0.00319858 Jy ! Component: 900 - total flux cleaned = -0.00316783 Jy ! Component: 950 - total flux cleaned = -0.00316807 Jy ! Component: 1000 - total flux cleaned = -0.00316825 Jy ! Component: 1050 - total flux cleaned = -0.00318229 Jy ! Component: 1100 - total flux cleaned = -0.00318211 Jy ! Component: 1150 - total flux cleaned = -0.00316812 Jy ! Component: 1200 - total flux cleaned = -0.00318179 Jy ! Component: 1250 - total flux cleaned = -0.00316821 Jy ! Component: 1300 - total flux cleaned = -0.00316828 Jy ! Component: 1350 - total flux cleaned = -0.00312977 Jy ! Component: 1400 - total flux cleaned = -0.00310448 Jy ! Component: 1450 - total flux cleaned = -0.00312955 Jy ! Component: 1500 - total flux cleaned = -0.00303092 Jy ! Component: 1550 - total flux cleaned = -0.00303101 Jy ! Component: 1600 - total flux cleaned = -0.00301887 Jy ! Component: 1650 - total flux cleaned = -0.00299544 Jy ! Component: 1700 - total flux cleaned = -0.00298403 Jy ! Component: 1750 - total flux cleaned = -0.00293867 Jy ! Component: 1800 - total flux cleaned = -0.00292754 Jy ! Component: 1850 - total flux cleaned = -0.00294986 Jy ! Component: 1900 - total flux cleaned = -0.00297191 Jy ! Component: 1950 - total flux cleaned = -0.0029933 Jy ! Component: 2000 - total flux cleaned = -0.00301462 Jy ! Component: 2050 - total flux cleaned = -0.00301438 Jy ! Component: 2100 - total flux cleaned = -0.0030144 Jy ! Component: 2150 - total flux cleaned = -0.00301425 Jy ! Component: 2200 - total flux cleaned = -0.00300404 Jy ! Component: 2250 - total flux cleaned = -0.00302392 Jy ! Component: 2300 - total flux cleaned = -0.00303387 Jy ! Component: 2350 - total flux cleaned = -0.00304374 Jy ! Component: 2400 - total flux cleaned = -0.00310147 Jy ! Component: 2450 - total flux cleaned = -0.00313002 Jy ! Component: 2500 - total flux cleaned = -0.0031584 Jy ! Component: 2550 - total flux cleaned = -0.00321421 Jy ! Component: 2600 - total flux cleaned = -0.00323262 Jy ! Component: 2650 - total flux cleaned = -0.00328736 Jy ! Component: 2700 - total flux cleaned = -0.00327835 Jy ! Component: 2750 - total flux cleaned = -0.0033498 Jy ! Component: 2800 - total flux cleaned = -0.00341178 Jy ! Component: 2850 - total flux cleaned = -0.00346428 Jy ! Component: 2900 - total flux cleaned = -0.00349026 Jy ! Component: 2950 - total flux cleaned = -0.00356766 Jy ! Component: 3000 - total flux cleaned = -0.00361868 Jy ! Component: 3050 - total flux cleaned = -0.00364394 Jy ! Component: 3100 - total flux cleaned = -0.0036774 Jy ! Component: 3150 - total flux cleaned = -0.00366918 Jy ! Component: 3200 - total flux cleaned = -0.00373503 Jy ! Component: 3250 - total flux cleaned = -0.0037269 Jy ! Component: 3300 - total flux cleaned = -0.00375119 Jy ! Component: 3350 - total flux cleaned = -0.00376724 Jy ! Component: 3400 - total flux cleaned = -0.00379921 Jy ! Component: 3450 - total flux cleaned = -0.00381515 Jy ! Component: 3500 - total flux cleaned = -0.00383885 Jy ! Component: 3550 - total flux cleaned = -0.00386233 Jy ! Component: 3600 - total flux cleaned = -0.00387783 Jy ! Component: 3650 - total flux cleaned = -0.00388554 Jy ! Component: 3700 - total flux cleaned = -0.00390843 Jy ! Component: 3750 - total flux cleaned = -0.0038857 Jy ! Component: 3800 - total flux cleaned = -0.00387823 Jy ! Component: 3850 - total flux cleaned = -0.00390816 Jy ! Component: 3900 - total flux cleaned = -0.00390817 Jy ! Component: 3950 - total flux cleaned = -0.00391557 Jy ! Component: 4000 - total flux cleaned = -0.00393021 Jy ! Component: 4050 - total flux cleaned = -0.00393747 Jy ! Total flux subtracted in 4096 components = -0.0039158 Jy ! Clean residual min=-0.000403 max=0.000421 Jy/beam ! Clean residual mean=-0.000002 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.0682814 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 302 components and 0.0682813 Jy ![Exited script file: muppet] wmap "J1440+0127_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.558 x 7.074 at -4.746 degrees (North through East) ! Clean map min=-0.0010787 max=0.065541 Jy/beam ! Writing clean map to FITS file: J1440+0127_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.065541 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012635 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.578339 0.578339 1.15668 2.31336 4.62671 9.25342 18.5068 37.0137 74.0274 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.558 x 7.074 at -4.746 degrees (North through East) ! Clean map min=-0.0010787 max=0.065541 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1440+0127_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:43 2017