! Started logfile: J1439+4958_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:08:31 2016 obs J1439+4958_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1439+4958_S_2014_08_09_pus_uva.fits ! AN table 1: 107 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.533956 visibilities/baseline/integration-bin. ! Found source: J1439+4958 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 10284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1439+4958_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 346 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911819Jy sigma=0.010452 ! Fit after self-cal, rms=0.888065Jy sigma=0.010181 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.568 mas, bmaj=5.753 mas, bpa=38.6 degrees ! Estimated noise=1067.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0875315 Jy ! Component: 100 - total flux cleaned = 0.106658 Jy ! Total flux subtracted in 100 components = 0.106658 Jy ! Clean residual min=-0.004579 max=0.005418 Jy/beam ! Clean residual mean=0.000010 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 0.106658 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.106658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074518Jy sigma=0.000784 ! Fit after self-cal, rms=0.074511Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.372 mas, bmaj=6.314 mas, bpa=38.92 degrees ! Estimated noise=620.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697367 Jy ! Component: 100 - total flux cleaned = 0.0105091 Jy ! Component: 150 - total flux cleaned = 0.0127666 Jy ! Component: 200 - total flux cleaned = 0.0142594 Jy ! Total flux subtracted in 200 components = 0.0142594 Jy ! Clean residual min=-0.002837 max=0.003069 Jy/beam ! Clean residual mean=0.000011 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.120918 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 39 components and 0.120918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073726Jy sigma=0.000778 ! Fit after self-cal, rms=0.073727Jy sigma=0.000778 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.87 HN 0.96 KP 1.03 ! LA 1.11 MK 1.03 NL 1.02 OV 0.99 ! PT 1.08 SC 0.97 ! ! ! Correcting IF 2. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.05 KP 1.04 ! LA 1.04 MK 1.08 NL 1.03 OV 1.01 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 3. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.07 KP 0.90 ! LA 0.82 MK 1.13 NL 0.99 OV 0.94 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 0.97 KP 0.88 ! LA 0.81 MK 1.01 NL 1.08 OV 0.98 ! PT 1.09 SC 0.98 ! ! ! Fit before self-cal, rms=0.073727Jy sigma=0.000778 ! Fit after self-cal, rms=0.071804Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.368 mas, bmaj=6.247 mas, bpa=39.33 degrees ! Estimated noise=631.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000358475 Jy ! Component: 100 - total flux cleaned = -0.000357469 Jy ! Component: 150 - total flux cleaned = -0.000373706 Jy ! Component: 200 - total flux cleaned = -0.000416416 Jy ! Total flux subtracted in 200 components = -0.000416416 Jy ! Clean residual min=-0.002331 max=0.002334 Jy/beam ! Clean residual mean=0.000008 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.120501 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.120501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071798Jy sigma=0.000771 ! Fit after self-cal, rms=0.071782Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071782Jy sigma=0.000771 ! Fit after self-cal, rms=0.071935Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.344 mas, bmaj=6.294 mas, bpa=39.5 degrees ! Estimated noise=630.982 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.94642e-05 Jy ! Component: 100 - total flux cleaned = -7.49057e-06 Jy ! Component: 150 - total flux cleaned = -4.86909e-05 Jy ! Component: 200 - total flux cleaned = -6.03392e-05 Jy ! Total flux subtracted in 200 components = -6.03392e-05 Jy ! Clean residual min=-0.001908 max=0.002088 Jy/beam ! Clean residual mean=0.000005 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.120441 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.120441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071927Jy sigma=0.000769 ! Fit after self-cal, rms=0.071944Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.17082e-06 Jy ! Component: 100 - total flux cleaned = -1.61537e-05 Jy ! Component: 150 - total flux cleaned = -3.58049e-05 Jy ! Component: 200 - total flux cleaned = -4.48184e-05 Jy ! Total flux subtracted in 200 components = -4.48184e-05 Jy ! Clean residual min=-0.001910 max=0.002078 Jy/beam ! Clean residual mean=0.000005 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.120396 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.120396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071941Jy sigma=0.000769 ! Fit after self-cal, rms=0.071940Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071940Jy sigma=0.000769 ! Fit after self-cal, rms=0.072061Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.335 mas, bmaj=6.303 mas, bpa=39.54 degrees ! Estimated noise=631.877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000143995 Jy ! Component: 100 - total flux cleaned = 0.00010937 Jy ! Component: 150 - total flux cleaned = 8.98772e-05 Jy ! Component: 200 - total flux cleaned = 7.21093e-05 Jy ! Total flux subtracted in 200 components = 7.21093e-05 Jy ! Clean residual min=-0.001912 max=0.002040 Jy/beam ! Clean residual mean=0.000005 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.120468 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 0.120468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072057Jy sigma=0.000769 ! Fit after self-cal, rms=0.072058Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84586e-05 Jy ! Component: 100 - total flux cleaned = -3.48125e-05 Jy ! Component: 150 - total flux cleaned = -4.91942e-05 Jy ! Component: 200 - total flux cleaned = -6.26388e-05 Jy ! Total flux subtracted in 200 components = -6.26388e-05 Jy ! Clean residual min=-0.001905 max=0.002040 Jy/beam ! Clean residual mean=0.000005 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.120406 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.120406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072056Jy sigma=0.000769 ! Fit after self-cal, rms=0.072056Jy sigma=0.000769 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072056Jy sigma=0.000769 ! Fit after self-cal, rms=0.072119Jy sigma=0.000769 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.986 mas, bmaj=8.442 mas, bpa=24.37 degrees ! Estimated noise=735.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356948 Jy ! Component: 100 - total flux cleaned = 0.000366889 Jy ! Component: 150 - total flux cleaned = 0.000375106 Jy ! Component: 200 - total flux cleaned = 0.000374793 Jy ! Total flux subtracted in 200 components = 0.000374793 Jy ! Clean residual min=-0.002014 max=0.001815 Jy/beam ! Clean residual mean=0.000010 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.12078 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 76 components and 0.12078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072119Jy sigma=0.000769 ! Fit after self-cal, rms=0.072119Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.33267e-05 Jy ! Component: 100 - total flux cleaned = 2.10289e-05 Jy ! Component: 150 - total flux cleaned = 2.07782e-05 Jy ! Component: 200 - total flux cleaned = 2.08802e-05 Jy ! Total flux subtracted in 200 components = 2.08802e-05 Jy ! Clean residual min=-0.002024 max=0.001791 Jy/beam ! Clean residual mean=0.000010 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.120801 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 78 components and 0.120801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072119Jy sigma=0.000769 ! Fit after self-cal, rms=0.072119Jy sigma=0.000769 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=6.311 mas, bpa=39.58 degrees ! Estimated noise=632.557 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.326 x 6.311 at 39.58 degrees (North through East) ! Clean map min=-0.0018483 max=0.11283 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.55 mas, bmaj=5.815 mas, bpa=38.9 degrees ! Estimated noise=1085.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874217 Jy ! Component: 100 - total flux cleaned = 0.106597 Jy ! Component: 150 - total flux cleaned = 0.112585 Jy ! Component: 200 - total flux cleaned = 0.116011 Jy ! Total flux subtracted in 200 components = 0.116011 Jy ! Clean residual min=-0.003239 max=0.003108 Jy/beam ! Clean residual mean=0.000004 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.116011 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.116011 Jy ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=6.311 mas, bpa=39.58 degrees ! Estimated noise=632.557 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00258614 Jy ! Component: 100 - total flux cleaned = 0.00380833 Jy ! Component: 150 - total flux cleaned = 0.0041086 Jy ! Component: 200 - total flux cleaned = 0.00423294 Jy ! Total flux subtracted in 200 components = 0.00423294 Jy ! Clean residual min=-0.001936 max=0.002041 Jy/beam ! Clean residual mean=0.000006 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.120244 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.120244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.986 mas, bmaj=8.442 mas, bpa=24.37 degrees ! Estimated noise=735.294 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501859 Jy ! Component: 100 - total flux cleaned = 0.000517459 Jy ! Component: 150 - total flux cleaned = 0.000530838 Jy ! Component: 200 - total flux cleaned = 0.000529891 Jy ! Total flux subtracted in 200 components = 0.000529891 Jy ! Clean residual min=-0.002017 max=0.001800 Jy/beam ! Clean residual mean=0.000010 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.120774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.24089e-07 Jy ! Component: 100 - total flux cleaned = -1.39816e-07 Jy ! Component: 150 - total flux cleaned = 9.16035e-06 Jy ! Component: 200 - total flux cleaned = 9.22968e-06 Jy ! Total flux subtracted in 200 components = 9.22968e-06 Jy ! Clean residual min=-0.002034 max=0.001791 Jy/beam ! Clean residual mean=0.000010 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.120783 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.120783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.326 mas, bmaj=6.311 mas, bpa=39.58 degrees ! Estimated noise=632.557 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000319825 Jy ! Component: 100 - total flux cleaned = -0.000264045 Jy ! Component: 150 - total flux cleaned = -0.000251792 Jy ! Component: 200 - total flux cleaned = -0.000251814 Jy ! Total flux subtracted in 200 components = -0.000251814 Jy ! Clean residual min=-0.001926 max=0.001982 Jy/beam ! Clean residual mean=0.000005 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.120531 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.120531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072122Jy sigma=0.000769 ! Fit after self-cal, rms=0.072122Jy sigma=0.000769 wmodel J1439+4958_S_2014_08_09_pus_map.mod ! Writing 50 model components to file: J1439+4958_S_2014_08_09_pus_map.mod wobs J1439+4958_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1439+4958_S_2014_08_09_pus_uvs.fits wwins J1439+4958_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1439+4958_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213918 Jy ! Component: 100 - total flux cleaned = 0.000346065 Jy ! Component: 150 - total flux cleaned = 0.000378348 Jy ! Component: 200 - total flux cleaned = 0.00034827 Jy ! Component: 250 - total flux cleaned = 0.00026098 Jy ! Component: 300 - total flux cleaned = 0.00031889 Jy ! Component: 350 - total flux cleaned = 0.000430575 Jy ! Component: 400 - total flux cleaned = 0.000566223 Jy ! Component: 450 - total flux cleaned = 0.000697521 Jy ! Component: 500 - total flux cleaned = 0.000722613 Jy ! Component: 550 - total flux cleaned = 0.000797985 Jy ! Component: 600 - total flux cleaned = 0.000847209 Jy ! Component: 650 - total flux cleaned = 0.000822887 Jy ! Component: 700 - total flux cleaned = 0.000822567 Jy ! Component: 750 - total flux cleaned = 0.000823382 Jy ! Component: 800 - total flux cleaned = 0.000846471 Jy ! Component: 850 - total flux cleaned = 0.000891549 Jy ! Component: 900 - total flux cleaned = 0.000847605 Jy ! Component: 950 - total flux cleaned = 0.00086955 Jy ! Component: 1000 - total flux cleaned = 0.000933887 Jy ! Component: 1050 - total flux cleaned = 0.000891623 Jy ! Component: 1100 - total flux cleaned = 0.000933406 Jy ! Component: 1150 - total flux cleaned = 0.000953966 Jy ! Component: 1200 - total flux cleaned = 0.000934053 Jy ! Component: 1250 - total flux cleaned = 0.000973669 Jy ! Component: 1300 - total flux cleaned = 0.000915158 Jy ! Component: 1350 - total flux cleaned = 0.000837743 Jy ! Component: 1400 - total flux cleaned = 0.000799703 Jy ! Component: 1450 - total flux cleaned = 0.000799795 Jy ! Component: 1500 - total flux cleaned = 0.000780998 Jy ! Component: 1550 - total flux cleaned = 0.000744364 Jy ! Component: 1600 - total flux cleaned = 0.000708417 Jy ! Component: 1650 - total flux cleaned = 0.000726607 Jy ! Component: 1700 - total flux cleaned = 0.000708896 Jy ! Component: 1750 - total flux cleaned = 0.000673578 Jy ! Component: 1800 - total flux cleaned = 0.000690844 Jy ! Component: 1850 - total flux cleaned = 0.000656363 Jy ! Component: 1900 - total flux cleaned = 0.000639307 Jy ! Component: 1950 - total flux cleaned = 0.000622546 Jy ! Component: 2000 - total flux cleaned = 0.000589353 Jy ! Component: 2050 - total flux cleaned = 0.00063857 Jy ! Component: 2100 - total flux cleaned = 0.000654885 Jy ! Component: 2150 - total flux cleaned = 0.000687011 Jy ! Component: 2200 - total flux cleaned = 0.000687022 Jy ! Component: 2250 - total flux cleaned = 0.000702876 Jy ! Component: 2300 - total flux cleaned = 0.000718471 Jy ! Component: 2350 - total flux cleaned = 0.000718761 Jy ! Component: 2400 - total flux cleaned = 0.000764312 Jy ! Component: 2450 - total flux cleaned = 0.00076436 Jy ! Component: 2500 - total flux cleaned = 0.00077942 Jy ! Component: 2550 - total flux cleaned = 0.000794215 Jy ! Component: 2600 - total flux cleaned = 0.000881682 Jy ! Component: 2650 - total flux cleaned = 0.000896082 Jy ! Component: 2700 - total flux cleaned = 0.000896005 Jy ! Component: 2750 - total flux cleaned = 0.000867673 Jy ! Component: 2800 - total flux cleaned = 0.000896006 Jy ! Component: 2850 - total flux cleaned = 0.000853981 Jy ! Component: 2900 - total flux cleaned = 0.000853965 Jy ! Component: 2950 - total flux cleaned = 0.000840185 Jy ! Component: 3000 - total flux cleaned = 0.000840276 Jy ! Component: 3050 - total flux cleaned = 0.00079959 Jy ! Component: 3100 - total flux cleaned = 0.000786361 Jy ! Component: 3150 - total flux cleaned = 0.000773032 Jy ! Component: 3200 - total flux cleaned = 0.000707025 Jy ! Component: 3250 - total flux cleaned = 0.000733274 Jy ! Component: 3300 - total flux cleaned = 0.000694411 Jy ! Component: 3350 - total flux cleaned = 0.00068134 Jy ! Component: 3400 - total flux cleaned = 0.000655877 Jy ! Component: 3450 - total flux cleaned = 0.000605058 Jy ! Component: 3500 - total flux cleaned = 0.00061762 Jy ! Component: 3550 - total flux cleaned = 0.000580098 Jy ! Component: 3600 - total flux cleaned = 0.000629826 Jy ! Component: 3650 - total flux cleaned = 0.0006298 Jy ! Component: 3700 - total flux cleaned = 0.000593014 Jy ! Component: 3750 - total flux cleaned = 0.000593107 Jy ! Component: 3800 - total flux cleaned = 0.000568926 Jy ! Component: 3850 - total flux cleaned = 0.000580773 Jy ! Component: 3900 - total flux cleaned = 0.000545034 Jy ! Component: 3950 - total flux cleaned = 0.00050965 Jy ! Component: 4000 - total flux cleaned = 0.000533149 Jy ! Component: 4050 - total flux cleaned = 0.000451405 Jy ! Total flux subtracted in 4096 components = 0.00047461 Jy ! Clean residual min=-0.000701 max=0.000597 Jy/beam ! Clean residual mean=0.000000 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.121006 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 332 components and 0.121006 Jy ![Exited script file: muppet] wmap "J1439+4958_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.326 x 6.311 at 39.58 degrees (North through East) ! Clean map min=-0.001463 max=0.11275 Jy/beam ! Writing clean map to FITS file: J1439+4958_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112746 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214019 device "J1439+4958_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1439+4958_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.569475 0.569475 1.13895 2.2779 4.5558 9.1116 18.2232 36.4464 72.8928 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.326 x 6.311 at 39.58 degrees (North through East) ! Clean map min=-0.001463 max=0.11275 Jy/beam quit ! Quitting program ! Log file J1439+4958_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:08:35 2016