! Started logfile: J1439+3253_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:33 2017 obs J1439+3253_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1439+3253_S_2014_01_04_pus_uva.fits ! AN table 1: 106 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1439+3253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 9116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1439+3253_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 212 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986256Jy sigma=0.013849 ! Fit after self-cal, rms=0.959999Jy sigma=0.013445 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.637 mas, bmaj=4.348 mas, bpa=38.78 degrees ! Estimated noise=1045.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327884 Jy ! Component: 100 - total flux cleaned = 0.042277 Jy ! Total flux subtracted in 100 components = 0.042277 Jy ! Clean residual min=-0.004750 max=0.004299 Jy/beam ! Clean residual mean=-0.000008 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.042277 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.042277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068133Jy sigma=0.000836 ! Fit after self-cal, rms=0.067618Jy sigma=0.000829 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.546 mas, bmaj=5.199 mas, bpa=38.09 degrees ! Estimated noise=558.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00664709 Jy ! Component: 100 - total flux cleaned = 0.00975093 Jy ! Component: 150 - total flux cleaned = 0.0113503 Jy ! Component: 200 - total flux cleaned = 0.0122485 Jy ! Total flux subtracted in 200 components = 0.0122485 Jy ! Clean residual min=-0.003576 max=0.002918 Jy/beam ! Clean residual mean=0.000006 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0545255 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0545255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067143Jy sigma=0.000818 ! Fit after self-cal, rms=0.067233Jy sigma=0.000817 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.92 KP 1.00* LA 1.04 ! MK 0.95 NL 1.06 OV 1.01 PT 1.11 ! SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.01 KP 1.00* LA 1.01 ! MK 1.00 NL 1.16 OV 1.10 PT 1.10 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.10 KP 1.00* LA 0.90 ! MK 0.99 NL 1.01 OV 0.97 PT 1.03 ! SC 1.06 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 KP 1.00* LA 0.91 ! MK 0.99 NL 1.12 OV 1.16 PT 1.11 ! SC 0.89 ! ! ! Fit before self-cal, rms=0.067233Jy sigma=0.000817 ! Fit after self-cal, rms=0.067654Jy sigma=0.000812 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.478 mas, bmaj=5.179 mas, bpa=41.44 degrees ! Estimated noise=551.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000703787 Jy ! Component: 100 - total flux cleaned = 0.000979614 Jy ! Component: 150 - total flux cleaned = 0.00114817 Jy ! Component: 200 - total flux cleaned = 0.00132976 Jy ! Total flux subtracted in 200 components = 0.00132976 Jy ! Clean residual min=-0.002450 max=0.002961 Jy/beam ! Clean residual mean=0.000010 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.0558553 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.0558553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067598Jy sigma=0.000812 ! Fit after self-cal, rms=0.068331Jy sigma=0.000811 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068331Jy sigma=0.000811 ! Fit after self-cal, rms=0.070607Jy sigma=0.000809 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.377 mas, bmaj=5.167 mas, bpa=41.74 degrees ! Estimated noise=553.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000894891 Jy ! Component: 100 - total flux cleaned = 0.00116861 Jy ! Component: 150 - total flux cleaned = 0.00139445 Jy ! Component: 200 - total flux cleaned = 0.00153645 Jy ! Total flux subtracted in 200 components = 0.00153645 Jy ! Clean residual min=-0.002441 max=0.003183 Jy/beam ! Clean residual mean=0.000008 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0573918 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.0573918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070544Jy sigma=0.000809 ! Fit after self-cal, rms=0.070962Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210116 Jy ! Component: 100 - total flux cleaned = 0.00215315 Jy ! Component: 150 - total flux cleaned = 0.0021141 Jy ! Component: 200 - total flux cleaned = 0.00203946 Jy ! Total flux subtracted in 200 components = 0.00203946 Jy ! Clean residual min=-0.002537 max=0.002438 Jy/beam ! Clean residual mean=0.000006 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0594312 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0594312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070839Jy sigma=0.000806 ! Fit after self-cal, rms=0.070908Jy sigma=0.000806 ! Inverting map ! Added new window around map position (11, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253303 Jy ! Component: 100 - total flux cleaned = 0.00369156 Jy ! Component: 150 - total flux cleaned = 0.00391993 Jy ! Component: 200 - total flux cleaned = 0.00412276 Jy ! Total flux subtracted in 200 components = 0.00412276 Jy ! Clean residual min=-0.002230 max=0.001869 Jy/beam ! Clean residual mean=0.000005 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.063554 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.063554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070788Jy sigma=0.000804 ! Fit after self-cal, rms=0.070791Jy sigma=0.000804 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070791Jy sigma=0.000804 ! Fit after self-cal, rms=0.071889Jy sigma=0.000803 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.386 mas, bmaj=5.188 mas, bpa=42.07 degrees ! Estimated noise=554.454 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118322 Jy ! Component: 100 - total flux cleaned = 0.00165754 Jy ! Component: 150 - total flux cleaned = 0.00185697 Jy ! Component: 200 - total flux cleaned = 0.00206937 Jy ! Total flux subtracted in 200 components = 0.00206937 Jy ! Clean residual min=-0.001857 max=0.001787 Jy/beam ! Clean residual mean=0.000005 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.0656234 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 0.0656234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071816Jy sigma=0.000803 ! Fit after self-cal, rms=0.071969Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450092 Jy ! Component: 100 - total flux cleaned = 0.000614442 Jy ! Component: 150 - total flux cleaned = 0.000760857 Jy ! Component: 200 - total flux cleaned = 0.000860519 Jy ! Total flux subtracted in 200 components = 0.000860519 Jy ! Clean residual min=-0.001740 max=0.001735 Jy/beam ! Clean residual mean=0.000006 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.0664839 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 92 components and 0.0664839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071916Jy sigma=0.000801 ! Fit after self-cal, rms=0.071951Jy sigma=0.000801 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071951Jy sigma=0.000801 ! Fit after self-cal, rms=0.072454Jy sigma=0.000801 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=9.254 mas, bpa=42.59 degrees ! Estimated noise=660.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000762617 Jy ! Component: 100 - total flux cleaned = 0.00116397 Jy ! Component: 150 - total flux cleaned = 0.00145242 Jy ! Component: 200 - total flux cleaned = 0.00159328 Jy ! Total flux subtracted in 200 components = 0.00159328 Jy ! Clean residual min=-0.001542 max=0.001746 Jy/beam ! Clean residual mean=0.000008 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0680772 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 127 components and 0.0680772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072440Jy sigma=0.000801 ! Fit after self-cal, rms=0.072509Jy sigma=0.000801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307702 Jy ! Component: 100 - total flux cleaned = 0.000483546 Jy ! Component: 150 - total flux cleaned = 0.000576291 Jy ! Component: 200 - total flux cleaned = 0.000674721 Jy ! Total flux subtracted in 200 components = 0.000674721 Jy ! Clean residual min=-0.001572 max=0.001682 Jy/beam ! Clean residual mean=0.000008 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.0687519 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 133 components and 0.0687519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072501Jy sigma=0.000801 ! Fit after self-cal, rms=0.072506Jy sigma=0.000801 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.398 mas, bmaj=5.199 mas, bpa=42.38 degrees ! Estimated noise=554.164 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.398 x 5.199 at 42.38 degrees (North through East) ! Clean map min=-0.0026329 max=0.040112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=4.374 mas, bpa=41.71 degrees ! Estimated noise=1027.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0307289 Jy ! Component: 100 - total flux cleaned = 0.0419397 Jy ! Component: 150 - total flux cleaned = 0.047385 Jy ! Component: 200 - total flux cleaned = 0.0521323 Jy ! Total flux subtracted in 200 components = 0.0521323 Jy ! Clean residual min=-0.005061 max=0.004414 Jy/beam ! Clean residual mean=-0.000002 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.0521323 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0521323 Jy ! Inverting map and beam ! Estimated beam: bmin=4.398 mas, bmaj=5.199 mas, bpa=42.38 degrees ! Estimated noise=554.164 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507659 Jy ! Component: 100 - total flux cleaned = 0.00782136 Jy ! Component: 150 - total flux cleaned = 0.00959353 Jy ! Component: 200 - total flux cleaned = 0.0112046 Jy ! Total flux subtracted in 200 components = 0.0112046 Jy ! Clean residual min=-0.002305 max=0.002265 Jy/beam ! Clean residual mean=0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0633369 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 50 components and 0.0633369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.246 mas, bmaj=9.254 mas, bpa=42.59 degrees ! Estimated noise=660.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129215 Jy ! Component: 100 - total flux cleaned = 0.00223635 Jy ! Component: 150 - total flux cleaned = 0.00301643 Jy ! Component: 200 - total flux cleaned = 0.00366885 Jy ! Total flux subtracted in 200 components = 0.00366885 Jy ! Clean residual min=-0.001632 max=0.002073 Jy/beam ! Clean residual mean=0.000008 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0670057 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502406 Jy ! Component: 100 - total flux cleaned = 0.000905965 Jy ! Component: 150 - total flux cleaned = 0.00123242 Jy ! Component: 200 - total flux cleaned = 0.00146014 Jy ! Total flux subtracted in 200 components = 0.00146014 Jy ! Clean residual min=-0.001619 max=0.001857 Jy/beam ! Clean residual mean=0.000008 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.0684659 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 113 components and 0.0684659 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.398 mas, bmaj=5.199 mas, bpa=42.38 degrees ! Estimated noise=554.164 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225225 Jy ! Component: 100 - total flux cleaned = 0.000139357 Jy ! Component: 150 - total flux cleaned = 0.000178018 Jy ! Component: 200 - total flux cleaned = 0.000140857 Jy ! Total flux subtracted in 200 components = 0.000140857 Jy ! Clean residual min=-0.001623 max=0.001820 Jy/beam ! Clean residual mean=0.000004 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0686067 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.0686067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072485Jy sigma=0.000801 ! Fit after self-cal, rms=0.072498Jy sigma=0.000800 wmodel J1439+3253_S_2014_01_04_pus_map.mod ! Writing 128 model components to file: J1439+3253_S_2014_01_04_pus_map.mod wobs J1439+3253_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1439+3253_S_2014_01_04_pus_uvs.fits wwins J1439+3253_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1439+3253_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331771 Jy ! Component: 100 - total flux cleaned = 0.000415282 Jy ! Component: 150 - total flux cleaned = 0.000543692 Jy ! Component: 200 - total flux cleaned = 0.000641324 Jy ! Component: 250 - total flux cleaned = 0.000733578 Jy ! Component: 300 - total flux cleaned = 0.00077719 Jy ! Component: 350 - total flux cleaned = 0.000840753 Jy ! Component: 400 - total flux cleaned = 0.000901649 Jy ! Component: 450 - total flux cleaned = 0.000840352 Jy ! Component: 500 - total flux cleaned = 0.000800945 Jy ! Component: 550 - total flux cleaned = 0.000800617 Jy ! Component: 600 - total flux cleaned = 0.000857508 Jy ! Component: 650 - total flux cleaned = 0.000912883 Jy ! Component: 700 - total flux cleaned = 0.000985198 Jy ! Component: 750 - total flux cleaned = 0.000967403 Jy ! Component: 800 - total flux cleaned = 0.00096789 Jy ! Component: 850 - total flux cleaned = 0.000985625 Jy ! Component: 900 - total flux cleaned = 0.00105298 Jy ! Component: 950 - total flux cleaned = 0.00105274 Jy ! Component: 1000 - total flux cleaned = 0.00106885 Jy ! Component: 1050 - total flux cleaned = 0.00110074 Jy ! Component: 1100 - total flux cleaned = 0.00111645 Jy ! Component: 1150 - total flux cleaned = 0.00117784 Jy ! Component: 1200 - total flux cleaned = 0.0012079 Jy ! Component: 1250 - total flux cleaned = 0.00122272 Jy ! Component: 1300 - total flux cleaned = 0.00129628 Jy ! Component: 1350 - total flux cleaned = 0.00133992 Jy ! Component: 1400 - total flux cleaned = 0.0013544 Jy ! Component: 1450 - total flux cleaned = 0.00139629 Jy ! Component: 1500 - total flux cleaned = 0.00139631 Jy ! Component: 1550 - total flux cleaned = 0.00145069 Jy ! Component: 1600 - total flux cleaned = 0.00145032 Jy ! Component: 1650 - total flux cleaned = 0.00147689 Jy ! Component: 1700 - total flux cleaned = 0.00147693 Jy ! Component: 1750 - total flux cleaned = 0.00152882 Jy ! Component: 1800 - total flux cleaned = 0.001567 Jy ! Component: 1850 - total flux cleaned = 0.00155418 Jy ! Component: 1900 - total flux cleaned = 0.00156663 Jy ! Component: 1950 - total flux cleaned = 0.00161585 Jy ! Component: 2000 - total flux cleaned = 0.00164024 Jy ! Component: 2050 - total flux cleaned = 0.00167662 Jy ! Component: 2100 - total flux cleaned = 0.00173632 Jy ! Component: 2150 - total flux cleaned = 0.00183065 Jy ! Component: 2200 - total flux cleaned = 0.00191241 Jy ! Component: 2250 - total flux cleaned = 0.00199316 Jy ! Component: 2300 - total flux cleaned = 0.00205026 Jy ! Component: 2350 - total flux cleaned = 0.00211823 Jy ! Component: 2400 - total flux cleaned = 0.00220786 Jy ! Component: 2450 - total flux cleaned = 0.00224098 Jy ! Component: 2500 - total flux cleaned = 0.00227381 Jy ! Component: 2550 - total flux cleaned = 0.00231729 Jy ! Component: 2600 - total flux cleaned = 0.00234952 Jy ! Component: 2650 - total flux cleaned = 0.00237095 Jy ! Component: 2700 - total flux cleaned = 0.00243446 Jy ! Component: 2750 - total flux cleaned = 0.00243447 Jy ! Component: 2800 - total flux cleaned = 0.00245526 Jy ! Component: 2850 - total flux cleaned = 0.00244499 Jy ! Component: 2900 - total flux cleaned = 0.00249604 Jy ! Component: 2950 - total flux cleaned = 0.00252641 Jy ! Component: 3000 - total flux cleaned = 0.00253652 Jy ! Component: 3050 - total flux cleaned = 0.00254643 Jy ! Component: 3100 - total flux cleaned = 0.00255637 Jy ! Component: 3150 - total flux cleaned = 0.00257602 Jy ! Component: 3200 - total flux cleaned = 0.002576 Jy ! Component: 3250 - total flux cleaned = 0.00262441 Jy ! Component: 3300 - total flux cleaned = 0.00263396 Jy ! Component: 3350 - total flux cleaned = 0.00264353 Jy ! Component: 3400 - total flux cleaned = 0.00268149 Jy ! Component: 3450 - total flux cleaned = 0.00275679 Jy ! Component: 3500 - total flux cleaned = 0.00274737 Jy ! Component: 3550 - total flux cleaned = 0.00276599 Jy ! Component: 3600 - total flux cleaned = 0.00280281 Jy ! Component: 3650 - total flux cleaned = 0.00282124 Jy ! Component: 3700 - total flux cleaned = 0.00285763 Jy ! Component: 3750 - total flux cleaned = 0.0028485 Jy ! Component: 3800 - total flux cleaned = 0.00290239 Jy ! Component: 3850 - total flux cleaned = 0.00290244 Jy ! Component: 3900 - total flux cleaned = 0.00292906 Jy ! Component: 3950 - total flux cleaned = 0.00292906 Jy ! Component: 4000 - total flux cleaned = 0.0029554 Jy ! Component: 4050 - total flux cleaned = 0.00301641 Jy ! Total flux subtracted in 4096 components = 0.00302506 Jy ! Clean residual min=-0.000439 max=0.000512 Jy/beam ! Clean residual mean=0.000002 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.0716318 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 358 components and 0.0716318 Jy ![Exited script file: muppet] wmap "J1439+3253_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.398 x 5.199 at 42.38 degrees (North through East) ! Clean map min=-0.002322 max=0.039577 Jy/beam ! Writing clean map to FITS file: J1439+3253_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0395774 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142432 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.07965 1.07965 2.15929 4.31859 8.63718 17.2744 34.5487 69.0974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.398 x 5.199 at 42.38 degrees (North through East) ! Clean map min=-0.002322 max=0.039577 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1439+3253_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:38 2017