! Started logfile: J1435-0414_X_2015_01_22_pus_uvs.log on Wed Jan 4 13:11:37 2017 obs J1435-0414_X_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1435-0414_X_2015_01_22_pus_uva.fits ! AN table 1: 117 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.988604 visibilities/baseline/integration-bin. ! Found source: J1435-0414 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 295 lines of history. ! ! Reading 62460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1435-0414_X_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.980706Jy sigma=0.011210 ! Fit after self-cal, rms=0.956726Jy sigma=0.010968 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7076 mas, bmaj=1.715 mas, bpa=-1.943 degrees ! Estimated noise=647.606 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319717 Jy ! Component: 100 - total flux cleaned = 0.0424506 Jy ! Total flux subtracted in 100 components = 0.0424506 Jy ! Clean residual min=-0.003489 max=0.005478 Jy/beam ! Clean residual mean=-0.000009 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.0424506 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0424506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081716Jy sigma=0.000811 ! Fit after self-cal, rms=0.081261Jy sigma=0.000806 ! Inverting map ! Added new window around map position (-0.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751117 Jy ! Component: 100 - total flux cleaned = 0.0126302 Jy ! Total flux subtracted in 100 components = 0.0126302 Jy ! Clean residual min=-0.002613 max=0.003897 Jy/beam ! Clean residual mean=-0.000007 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.0550809 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.0550809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080113Jy sigma=0.000788 ! Fit after self-cal, rms=0.080072Jy sigma=0.000787 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.859 mas, bmaj=2.004 mas, bpa=-1.969 degrees ! Estimated noise=267.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791568 Jy ! Component: 100 - total flux cleaned = 0.013173 Jy ! Component: 150 - total flux cleaned = 0.0168375 Jy ! Component: 200 - total flux cleaned = 0.0194295 Jy ! Total flux subtracted in 200 components = 0.0194295 Jy ! Clean residual min=-0.001972 max=0.004512 Jy/beam ! Clean residual mean=0.000001 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0745104 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 61 components and 0.0745104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079248Jy sigma=0.000773 ! Fit after self-cal, rms=0.079209Jy sigma=0.000772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.02 KP 1.07 ! LA 0.92 MK 1.03 NL 1.08 OV 0.92 ! PT 0.99 SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.02 KP 0.99 ! LA 0.93 MK 1.12 NL 1.07 OV 0.90 ! PT 0.93 SC 1.25 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 0.99 KP 0.97 ! LA 0.91 MK 1.14 NL 1.14 OV 0.94 ! PT 0.92 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 0.97 KP 0.94 ! LA 0.97 MK 1.17 NL 1.09 OV 0.90 ! PT 0.90 SC 1.21 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.98 HN 0.92 KP 0.87 ! LA 0.88 MK 1.00 NL 1.14 OV 0.90 ! PT 0.95 SC 1.11 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.94 KP 0.88 ! LA 0.87 MK 1.02 NL 1.11 OV 0.96 ! PT 0.89 SC 1.13 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.09 HN 1.02 KP 0.83 ! LA 0.89 MK 1.07 NL 1.13 OV 0.99 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.07 HN 1.07 KP 0.84 ! LA 0.84 MK 0.95 NL 1.14 OV 0.95 ! PT 0.92 SC 1.10 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.02 HN 0.95 KP 0.90 ! LA 1.15 MK 0.88 NL 1.12 OV 0.96 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.95 KP 0.96 ! LA 0.97 MK 0.97 NL 1.07 OV 0.92 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.86 KP 0.94 ! LA 0.93 MK 0.91 NL 1.15 OV 0.94 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.86 KP 0.96 ! LA 0.91 MK 0.87 NL 1.08 OV 0.93 ! PT 0.96 SC 1.00 ! ! ! Fit before self-cal, rms=0.079209Jy sigma=0.000772 ! Fit after self-cal, rms=0.078940Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8716 mas, bmaj=2.061 mas, bpa=-2.815 degrees ! Estimated noise=265.114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122227 Jy ! Component: 100 - total flux cleaned = 0.0013486 Jy ! Component: 150 - total flux cleaned = 0.00141889 Jy ! Component: 200 - total flux cleaned = 0.00150888 Jy ! Total flux subtracted in 200 components = 0.00150888 Jy ! Clean residual min=-0.001713 max=0.002252 Jy/beam ! Clean residual mean=-0.000007 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0760193 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.0760193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078905Jy sigma=0.000768 ! Fit after self-cal, rms=0.078976Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078976Jy sigma=0.000768 ! Fit after self-cal, rms=0.078689Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8603 mas, bmaj=2.062 mas, bpa=-3.283 degrees ! Estimated noise=262.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000725782 Jy ! Component: 100 - total flux cleaned = 0.00091032 Jy ! Component: 150 - total flux cleaned = 0.00103517 Jy ! Component: 200 - total flux cleaned = 0.0011185 Jy ! Total flux subtracted in 200 components = 0.0011185 Jy ! Clean residual min=-0.001439 max=0.002013 Jy/beam ! Clean residual mean=-0.000006 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0771378 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.0771378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078671Jy sigma=0.000767 ! Fit after self-cal, rms=0.078680Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211339 Jy ! Component: 100 - total flux cleaned = 0.00344582 Jy ! Component: 150 - total flux cleaned = 0.00386745 Jy ! Component: 200 - total flux cleaned = 0.0041767 Jy ! Total flux subtracted in 200 components = 0.0041767 Jy ! Clean residual min=-0.001301 max=0.001812 Jy/beam ! Clean residual mean=-0.000008 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0813145 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.0813145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078613Jy sigma=0.000766 ! Fit after self-cal, rms=0.078570Jy sigma=0.000765 ! Inverting map ! Added new window around map position (-0.2, 16.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174853 Jy ! Component: 100 - total flux cleaned = 0.0029346 Jy ! Component: 150 - total flux cleaned = 0.00387689 Jy ! Component: 200 - total flux cleaned = 0.00437298 Jy ! Total flux subtracted in 200 components = 0.00437298 Jy ! Clean residual min=-0.001120 max=0.001285 Jy/beam ! Clean residual mean=-0.000007 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0856875 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.0856875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078515Jy sigma=0.000765 ! Fit after self-cal, rms=0.078468Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078468Jy sigma=0.000764 ! Fit after self-cal, rms=0.078113Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8555 mas, bmaj=2.058 mas, bpa=-3.577 degrees ! Estimated noise=261.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123758 Jy ! Component: 100 - total flux cleaned = 0.00179279 Jy ! Component: 150 - total flux cleaned = 0.00219393 Jy ! Component: 200 - total flux cleaned = 0.00251915 Jy ! Total flux subtracted in 200 components = 0.00251915 Jy ! Clean residual min=-0.001050 max=0.001164 Jy/beam ! Clean residual mean=-0.000004 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0882066 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 118 components and 0.0882066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078085Jy sigma=0.000764 ! Fit after self-cal, rms=0.078049Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000719973 Jy ! Component: 100 - total flux cleaned = 0.00105302 Jy ! Component: 150 - total flux cleaned = 0.00132119 Jy ! Component: 200 - total flux cleaned = 0.00146122 Jy ! Total flux subtracted in 200 components = 0.00146122 Jy ! Clean residual min=-0.001070 max=0.001130 Jy/beam ! Clean residual mean=-0.000005 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0896678 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 0.0896678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078033Jy sigma=0.000764 ! Fit after self-cal, rms=0.078015Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078015Jy sigma=0.000764 ! Fit after self-cal, rms=0.077813Jy sigma=0.000763 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=3.474 mas, bpa=1.913 degrees ! Estimated noise=328.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00120791 Jy ! Component: 100 - total flux cleaned = 0.00186789 Jy ! Component: 150 - total flux cleaned = 0.00211567 Jy ! Component: 200 - total flux cleaned = 0.00219538 Jy ! Total flux subtracted in 200 components = 0.00219538 Jy ! Clean residual min=-0.001250 max=0.001278 Jy/beam ! Clean residual mean=-0.000007 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0918632 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.0918632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077805Jy sigma=0.000763 ! Fit after self-cal, rms=0.077791Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473982 Jy ! Component: 100 - total flux cleaned = 0.000603219 Jy ! Component: 150 - total flux cleaned = 0.000670254 Jy ! Component: 200 - total flux cleaned = 0.000717 Jy ! Total flux subtracted in 200 components = 0.000717 Jy ! Clean residual min=-0.001276 max=0.001375 Jy/beam ! Clean residual mean=-0.000008 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0925802 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 147 components and 0.0925802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077790Jy sigma=0.000763 ! Fit after self-cal, rms=0.077787Jy sigma=0.000763 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8543 mas, bmaj=2.056 mas, bpa=-3.736 degrees ! Estimated noise=260.198 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8543 x 2.056 at -3.736 degrees (North through East) ! Clean map min=-0.00095634 max=0.039767 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=1.747 mas, bpa=-3.85 degrees ! Estimated noise=632.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313181 Jy ! Component: 100 - total flux cleaned = 0.0438836 Jy ! Component: 150 - total flux cleaned = 0.0518122 Jy ! Component: 200 - total flux cleaned = 0.0574188 Jy ! Total flux subtracted in 200 components = 0.0574188 Jy ! Clean residual min=-0.002834 max=0.003732 Jy/beam ! Clean residual mean=-0.000008 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0574188 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0574188 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8543 mas, bmaj=2.056 mas, bpa=-3.736 degrees ! Estimated noise=260.198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760838 Jy ! Component: 100 - total flux cleaned = 0.0128406 Jy ! Component: 150 - total flux cleaned = 0.016709 Jy ! Component: 200 - total flux cleaned = 0.0196798 Jy ! Total flux subtracted in 200 components = 0.0196798 Jy ! Clean residual min=-0.001850 max=0.001850 Jy/beam ! Clean residual mean=-0.000003 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.0770986 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 67 components and 0.0770986 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.126 mas, bmaj=3.474 mas, bpa=1.913 degrees ! Estimated noise=328.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00409772 Jy ! Component: 100 - total flux cleaned = 0.00677235 Jy ! Component: 150 - total flux cleaned = 0.00873492 Jy ! Component: 200 - total flux cleaned = 0.0102384 Jy ! Total flux subtracted in 200 components = 0.0102384 Jy ! Clean residual min=-0.001523 max=0.001435 Jy/beam ! Clean residual mean=-0.000008 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.087337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117362 Jy ! Component: 100 - total flux cleaned = 0.00210056 Jy ! Component: 150 - total flux cleaned = 0.00284954 Jy ! Component: 200 - total flux cleaned = 0.00346013 Jy ! Total flux subtracted in 200 components = 0.00346013 Jy ! Clean residual min=-0.001272 max=0.001253 Jy/beam ! Clean residual mean=-0.000008 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0907971 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 140 components and 0.0907972 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8543 mas, bmaj=2.056 mas, bpa=-3.736 degrees ! Estimated noise=260.198 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209839 Jy ! Component: 100 - total flux cleaned = 0.000535746 Jy ! Component: 150 - total flux cleaned = 0.000781443 Jy ! Component: 200 - total flux cleaned = 0.00104467 Jy ! Total flux subtracted in 200 components = 0.00104467 Jy ! Clean residual min=-0.001043 max=0.001032 Jy/beam ! Clean residual mean=-0.000004 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.0918418 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 160 components and 0.0918418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077784Jy sigma=0.000763 ! Fit after self-cal, rms=0.077746Jy sigma=0.000763 wmodel J1435-0414_X_2015_01_22_pus_map.mod ! Writing 160 model components to file: J1435-0414_X_2015_01_22_pus_map.mod wobs J1435-0414_X_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1435-0414_X_2015_01_22_pus_uvs.fits wwins J1435-0414_X_2015_01_22_pus_map.win ! wwins: Wrote 5 windows to J1435-0414_X_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.47934e-05 Jy ! Component: 100 - total flux cleaned = -2.47004e-05 Jy ! Component: 150 - total flux cleaned = -4.09836e-05 Jy ! Component: 200 - total flux cleaned = -7.10741e-05 Jy ! Component: 250 - total flux cleaned = -0.000128937 Jy ! Component: 300 - total flux cleaned = -0.000143017 Jy ! Component: 350 - total flux cleaned = -0.000170514 Jy ! Component: 400 - total flux cleaned = -0.00018376 Jy ! Component: 450 - total flux cleaned = -0.000209274 Jy ! Component: 500 - total flux cleaned = -0.000209205 Jy ! Component: 550 - total flux cleaned = -0.000209376 Jy ! Component: 600 - total flux cleaned = -0.000221222 Jy ! Component: 650 - total flux cleaned = -0.000266726 Jy ! Component: 700 - total flux cleaned = -0.000255201 Jy ! Component: 750 - total flux cleaned = -0.000233415 Jy ! Component: 800 - total flux cleaned = -0.000211903 Jy ! Component: 850 - total flux cleaned = -0.000170043 Jy ! Component: 900 - total flux cleaned = -0.000149424 Jy ! Component: 950 - total flux cleaned = -0.000128863 Jy ! Component: 1000 - total flux cleaned = -7.92632e-05 Jy ! Component: 1050 - total flux cleaned = -8.92957e-05 Jy ! Component: 1100 - total flux cleaned = -8.00043e-05 Jy ! Component: 1150 - total flux cleaned = -9.91534e-05 Jy ! Component: 1200 - total flux cleaned = -0.000154962 Jy ! Component: 1250 - total flux cleaned = -0.000164145 Jy ! Component: 1300 - total flux cleaned = -0.000209345 Jy ! Component: 1350 - total flux cleaned = -0.000236167 Jy ! Component: 1400 - total flux cleaned = -0.000289008 Jy ! Component: 1450 - total flux cleaned = -0.000332235 Jy ! Component: 1500 - total flux cleaned = -0.000340663 Jy ! Component: 1550 - total flux cleaned = -0.000332244 Jy ! Component: 1600 - total flux cleaned = -0.00038207 Jy ! Component: 1650 - total flux cleaned = -0.000406584 Jy ! Component: 1700 - total flux cleaned = -0.000414639 Jy ! Component: 1750 - total flux cleaned = -0.000462321 Jy ! Component: 1800 - total flux cleaned = -0.000462257 Jy ! Component: 1850 - total flux cleaned = -0.000493131 Jy ! Component: 1900 - total flux cleaned = -0.000493009 Jy ! Component: 1950 - total flux cleaned = -0.00048562 Jy ! Component: 2000 - total flux cleaned = -0.00050803 Jy ! Total flux subtracted in 2048 components = -0.000515514 Jy ! Clean residual min=-0.000430 max=0.000477 Jy/beam ! Clean residual mean=-0.000004 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.0913263 Jy keep ! Adding 147 model components to the UV plane model. ! The established model now contains 307 components and 0.0913263 Jy ![Exited script file: muppet] wmap "J1435-0414_X_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8543 x 2.056 at -3.736 degrees (North through East) ! Clean map min=-0.00073821 max=0.040201 Jy/beam ! Writing clean map to FITS file: J1435-0414_X_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0402014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000141621 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05684 1.05684 2.11367 4.22734 8.45469 16.9094 33.8188 67.6375 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8543 x 2.056 at -3.736 degrees (North through East) ! Clean map min=-0.00073821 max=0.040201 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1435-0414_X_2015_01_22_pus_uvs.log closed on Wed Jan 4 13:11:41 2017