! Started logfile: J1429+6316_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:27:36 2017 obs J1429+6316_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1429+6316_S_2015_01_23_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.978329 visibilities/baseline/integration-bin. ! Found source: J1429+6316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 21308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1429+6316_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.965989Jy sigma=0.010267 ! Fit after self-cal, rms=0.941588Jy sigma=0.010094 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=3.583 mas, bpa=-77.57 degrees ! Estimated noise=867.393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0501831 Jy ! Component: 100 - total flux cleaned = 0.0624733 Jy ! Total flux subtracted in 100 components = 0.0624733 Jy ! Clean residual min=-0.003682 max=0.004584 Jy/beam ! Clean residual mean=0.000002 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0624733 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0624733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158905Jy sigma=0.000801 ! Fit after self-cal, rms=0.158879Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=4.522 mas, bpa=-88.82 degrees ! Estimated noise=478.381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00533107 Jy ! Component: 100 - total flux cleaned = 0.00781341 Jy ! Component: 150 - total flux cleaned = 0.00919037 Jy ! Component: 200 - total flux cleaned = 0.00998289 Jy ! Total flux subtracted in 200 components = 0.00998289 Jy ! Clean residual min=-0.003059 max=0.002554 Jy/beam ! Clean residual mean=0.000003 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0724562 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 38 components and 0.0724562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158497Jy sigma=0.000798 ! Fit after self-cal, rms=0.158482Jy sigma=0.000798 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.77 HN 1.00 KP 1.10 ! LA 0.97 MK 1.03 NL 1.00 OV 1.03 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.84 HN 1.08 KP 1.01 ! LA 0.93 MK 1.01 NL 1.12 OV 1.03 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.04 KP 0.89 ! LA 0.80 MK 1.03 NL 1.15 OV 0.95 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.55 HN 1.02 KP 0.85 ! LA 0.82 MK 1.01 NL 1.04 OV 1.03 ! PT 1.10 SC 1.01 ! ! ! Fit before self-cal, rms=0.158482Jy sigma=0.000798 ! Fit after self-cal, rms=0.115230Jy sigma=0.000793 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=4.57 mas, bpa=-88.6 degrees ! Estimated noise=480.945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320225 Jy ! Component: 100 - total flux cleaned = 0.000147207 Jy ! Component: 150 - total flux cleaned = 8.13363e-05 Jy ! Component: 200 - total flux cleaned = 3.87889e-05 Jy ! Total flux subtracted in 200 components = 3.87889e-05 Jy ! Clean residual min=-0.001928 max=0.001685 Jy/beam ! Clean residual mean=0.000005 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.072495 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.072495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115221Jy sigma=0.000793 ! Fit after self-cal, rms=0.115027Jy sigma=0.000793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115027Jy sigma=0.000793 ! Fit after self-cal, rms=0.105266Jy sigma=0.000792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=4.568 mas, bpa=-89.21 degrees ! Estimated noise=479.742 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.15465e-05 Jy ! Component: 100 - total flux cleaned = -7.66683e-05 Jy ! Component: 150 - total flux cleaned = -0.000102863 Jy ! Component: 200 - total flux cleaned = -0.000140103 Jy ! Total flux subtracted in 200 components = -0.000140103 Jy ! Clean residual min=-0.001751 max=0.001655 Jy/beam ! Clean residual mean=-0.000000 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0723549 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0723549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105260Jy sigma=0.000792 ! Fit after self-cal, rms=0.105239Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.21787e-07 Jy ! Component: 100 - total flux cleaned = -1.33339e-05 Jy ! Component: 150 - total flux cleaned = -4.67485e-05 Jy ! Component: 200 - total flux cleaned = -6.60864e-05 Jy ! Total flux subtracted in 200 components = -6.60864e-05 Jy ! Clean residual min=-0.001757 max=0.001658 Jy/beam ! Clean residual mean=0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0722888 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.0722888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105235Jy sigma=0.000792 ! Fit after self-cal, rms=0.105234Jy sigma=0.000792 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105234Jy sigma=0.000792 ! Fit after self-cal, rms=0.104989Jy sigma=0.000792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=4.574 mas, bpa=-89.38 degrees ! Estimated noise=480.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.53148e-05 Jy ! Component: 100 - total flux cleaned = -5.2251e-05 Jy ! Component: 150 - total flux cleaned = -7.3377e-05 Jy ! Component: 200 - total flux cleaned = -9.26032e-05 Jy ! Total flux subtracted in 200 components = -9.26032e-05 Jy ! Clean residual min=-0.001752 max=0.001627 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0721962 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0721961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104985Jy sigma=0.000792 ! Fit after self-cal, rms=0.104984Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.85739e-06 Jy ! Component: 100 - total flux cleaned = -2.3899e-05 Jy ! Component: 150 - total flux cleaned = -4.1908e-05 Jy ! Component: 200 - total flux cleaned = -5.81465e-05 Jy ! Total flux subtracted in 200 components = -5.81465e-05 Jy ! Clean residual min=-0.001756 max=0.001626 Jy/beam ! Clean residual mean=0.000000 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.072138 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.072138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104981Jy sigma=0.000792 ! Fit after self-cal, rms=0.104981Jy sigma=0.000792 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104981Jy sigma=0.000792 ! Fit after self-cal, rms=0.105058Jy sigma=0.000792 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=9.07 mas, bpa=77.26 degrees ! Estimated noise=613.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229444 Jy ! Component: 100 - total flux cleaned = 0.00022931 Jy ! Component: 150 - total flux cleaned = 0.000229456 Jy ! Component: 200 - total flux cleaned = 0.000221445 Jy ! Total flux subtracted in 200 components = 0.000221445 Jy ! Clean residual min=-0.001913 max=0.001927 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0723594 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 56 components and 0.0723594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105058Jy sigma=0.000792 ! Fit after self-cal, rms=0.105062Jy sigma=0.000792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.18821e-05 Jy ! Component: 100 - total flux cleaned = 8.16526e-05 Jy ! Component: 150 - total flux cleaned = 7.43659e-05 Jy ! Component: 200 - total flux cleaned = 7.38506e-05 Jy ! Total flux subtracted in 200 components = 7.38506e-05 Jy ! Clean residual min=-0.001919 max=0.001926 Jy/beam ! Clean residual mean=0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.0724333 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 59 components and 0.0724333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105063Jy sigma=0.000792 ! Fit after self-cal, rms=0.105064Jy sigma=0.000792 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.913 mas, bmaj=4.58 mas, bpa=-89.28 degrees ! Estimated noise=480.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.913 x 4.58 at -89.28 degrees (North through East) ! Clean map min=-0.0017562 max=0.063952 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.022 mas, bmaj=3.624 mas, bpa=-77.33 degrees ! Estimated noise=877.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0504145 Jy ! Component: 100 - total flux cleaned = 0.0629667 Jy ! Component: 150 - total flux cleaned = 0.0682031 Jy ! Component: 200 - total flux cleaned = 0.070064 Jy ! Total flux subtracted in 200 components = 0.070064 Jy ! Clean residual min=-0.002915 max=0.003617 Jy/beam ! Clean residual mean=0.000000 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0700641 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0700641 Jy ! Inverting map and beam ! Estimated beam: bmin=3.913 mas, bmaj=4.58 mas, bpa=-89.28 degrees ! Estimated noise=480.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019319 Jy ! Component: 100 - total flux cleaned = 0.00240568 Jy ! Component: 150 - total flux cleaned = 0.00267217 Jy ! Component: 200 - total flux cleaned = 0.00291584 Jy ! Total flux subtracted in 200 components = 0.00291584 Jy ! Clean residual min=-0.001810 max=0.001630 Jy/beam ! Clean residual mean=0.000001 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0729799 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.0729799 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.808 mas, bmaj=9.07 mas, bpa=77.26 degrees ! Estimated noise=613.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000479071 Jy ! Component: 100 - total flux cleaned = 0.000572264 Jy ! Component: 150 - total flux cleaned = 0.00063678 Jy ! Component: 200 - total flux cleaned = 0.000655693 Jy ! Total flux subtracted in 200 components = 0.000655693 Jy ! Clean residual min=-0.001903 max=0.002043 Jy/beam ! Clean residual mean=0.000002 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.0736356 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53611e-05 Jy ! Component: 100 - total flux cleaned = 4.09957e-05 Jy ! Component: 150 - total flux cleaned = 4.82907e-05 Jy ! Component: 200 - total flux cleaned = 6.22894e-05 Jy ! Total flux subtracted in 200 components = 6.22894e-05 Jy ! Clean residual min=-0.001891 max=0.002038 Jy/beam ! Clean residual mean=0.000003 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.0736979 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.0736979 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.913 mas, bmaj=4.58 mas, bpa=-89.28 degrees ! Estimated noise=480.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000267979 Jy ! Component: 100 - total flux cleaned = -0.000283269 Jy ! Component: 150 - total flux cleaned = -0.000269777 Jy ! Component: 200 - total flux cleaned = -0.000269577 Jy ! Total flux subtracted in 200 components = -0.000269577 Jy ! Clean residual min=-0.001779 max=0.001638 Jy/beam ! Clean residual mean=0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0734283 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 0.0734283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105044Jy sigma=0.000791 ! Fit after self-cal, rms=0.105029Jy sigma=0.000791 wmodel J1429+6316_S_2015_01_23_pus_map.mod ! Writing 75 model components to file: J1429+6316_S_2015_01_23_pus_map.mod wobs J1429+6316_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1429+6316_S_2015_01_23_pus_uvs.fits wwins J1429+6316_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1429+6316_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233611 Jy ! Component: 100 - total flux cleaned = -0.000148161 Jy ! Component: 150 - total flux cleaned = -3.80699e-05 Jy ! Component: 200 - total flux cleaned = -1.22335e-05 Jy ! Component: 250 - total flux cleaned = -1.21699e-05 Jy ! Component: 300 - total flux cleaned = 1.24645e-05 Jy ! Component: 350 - total flux cleaned = 3.5975e-05 Jy ! Component: 400 - total flux cleaned = 5.88518e-05 Jy ! Component: 450 - total flux cleaned = 5.89918e-05 Jy ! Component: 500 - total flux cleaned = 3.71579e-05 Jy ! Component: 550 - total flux cleaned = -2.65558e-05 Jy ! Component: 600 - total flux cleaned = -6.87511e-05 Jy ! Component: 650 - total flux cleaned = -0.000171825 Jy ! Component: 700 - total flux cleaned = -0.00023242 Jy ! Component: 750 - total flux cleaned = -0.000272591 Jy ! Component: 800 - total flux cleaned = -0.000369919 Jy ! Component: 850 - total flux cleaned = -0.00046559 Jy ! Component: 900 - total flux cleaned = -0.000484533 Jy ! Component: 950 - total flux cleaned = -0.000540167 Jy ! Component: 1000 - total flux cleaned = -0.000631202 Jy ! Component: 1050 - total flux cleaned = -0.000738965 Jy ! Component: 1100 - total flux cleaned = -0.000862329 Jy ! Component: 1150 - total flux cleaned = -0.000914331 Jy ! Component: 1200 - total flux cleaned = -0.00101744 Jy ! Component: 1250 - total flux cleaned = -0.00108541 Jy ! Component: 1300 - total flux cleaned = -0.00115242 Jy ! Component: 1350 - total flux cleaned = -0.00120208 Jy ! Component: 1400 - total flux cleaned = -0.00126732 Jy ! Component: 1450 - total flux cleaned = -0.00131557 Jy ! Component: 1500 - total flux cleaned = -0.0013955 Jy ! Component: 1550 - total flux cleaned = -0.00147429 Jy ! Component: 1600 - total flux cleaned = -0.00155221 Jy ! Component: 1650 - total flux cleaned = -0.00159863 Jy ! Component: 1700 - total flux cleaned = -0.00161384 Jy ! Component: 1750 - total flux cleaned = -0.00164422 Jy ! Component: 1800 - total flux cleaned = -0.00173411 Jy ! Component: 1850 - total flux cleaned = -0.00174888 Jy ! Component: 1900 - total flux cleaned = -0.00174893 Jy ! Component: 1950 - total flux cleaned = -0.00174884 Jy ! Component: 2000 - total flux cleaned = -0.00180681 Jy ! Component: 2050 - total flux cleaned = -0.00186415 Jy ! Component: 2100 - total flux cleaned = -0.0018784 Jy ! Component: 2150 - total flux cleaned = -0.00193469 Jy ! Component: 2200 - total flux cleaned = -0.00189273 Jy ! Component: 2250 - total flux cleaned = -0.00193414 Jy ! Component: 2300 - total flux cleaned = -0.001989 Jy ! Component: 2350 - total flux cleaned = -0.00200264 Jy ! Component: 2400 - total flux cleaned = -0.00205673 Jy ! Component: 2450 - total flux cleaned = -0.00206998 Jy ! Component: 2500 - total flux cleaned = -0.00209681 Jy ! Component: 2550 - total flux cleaned = -0.00212308 Jy ! Component: 2600 - total flux cleaned = -0.00217544 Jy ! Component: 2650 - total flux cleaned = -0.00222736 Jy ! Component: 2700 - total flux cleaned = -0.00224016 Jy ! Component: 2750 - total flux cleaned = -0.00221452 Jy ! Component: 2800 - total flux cleaned = -0.00225275 Jy ! Component: 2850 - total flux cleaned = -0.0022906 Jy ! Component: 2900 - total flux cleaned = -0.00221533 Jy ! Component: 2950 - total flux cleaned = -0.00230255 Jy ! Component: 3000 - total flux cleaned = -0.00226553 Jy ! Component: 3050 - total flux cleaned = -0.00225332 Jy ! Component: 3100 - total flux cleaned = -0.00227781 Jy ! Component: 3150 - total flux cleaned = -0.00237473 Jy ! Component: 3200 - total flux cleaned = -0.00237463 Jy ! Component: 3250 - total flux cleaned = -0.00235075 Jy ! Component: 3300 - total flux cleaned = -0.00236264 Jy ! Component: 3350 - total flux cleaned = -0.00242156 Jy ! Component: 3400 - total flux cleaned = -0.00244484 Jy ! Component: 3450 - total flux cleaned = -0.00243305 Jy ! Component: 3500 - total flux cleaned = -0.00253743 Jy ! Component: 3550 - total flux cleaned = -0.0025374 Jy ! Component: 3600 - total flux cleaned = -0.00250289 Jy ! Component: 3650 - total flux cleaned = -0.00258259 Jy ! Component: 3700 - total flux cleaned = -0.00261651 Jy ! Component: 3750 - total flux cleaned = -0.00260529 Jy ! Component: 3800 - total flux cleaned = -0.00265003 Jy ! Component: 3850 - total flux cleaned = -0.00269448 Jy ! Component: 3900 - total flux cleaned = -0.00271657 Jy ! Component: 3950 - total flux cleaned = -0.00277136 Jy ! Component: 4000 - total flux cleaned = -0.00278217 Jy ! Component: 4050 - total flux cleaned = -0.00279311 Jy ! Total flux subtracted in 4096 components = -0.00282545 Jy ! Clean residual min=-0.000618 max=0.000641 Jy/beam ! Clean residual mean=0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0706029 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 366 components and 0.0706028 Jy ![Exited script file: muppet] wmap "J1429+6316_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.913 x 4.58 at -89.28 degrees (North through East) ! Clean map min=-0.0015776 max=0.064165 Jy/beam ! Writing clean map to FITS file: J1429+6316_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0641646 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.916392 0.916392 1.83278 3.66557 7.33113 14.6623 29.3245 58.6491 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.913 x 4.58 at -89.28 degrees (North through East) ! Clean map min=-0.0015776 max=0.064165 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1429+6316_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:27:40 2017