! Started logfile: J1421-0643_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:56:08 2017 obs J1421-0643_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1421-0643_S_2015_01_22_pus_uva.fits ! AN table 1: 86 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.684238 visibilities/baseline/integration-bin. ! Found source: J1421-0643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 10592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1421-0643_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 155 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.895823Jy sigma=0.010847 ! Fit after self-cal, rms=0.877970Jy sigma=0.010689 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=6.481 mas, bpa=2.561 degrees ! Estimated noise=934.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0868204 Jy ! Component: 100 - total flux cleaned = 0.120763 Jy ! Total flux subtracted in 100 components = 0.120763 Jy ! Clean residual min=-0.010168 max=0.016636 Jy/beam ! Clean residual mean=0.000025 rms=0.003317 Jy/beam ! Combined flux in latest and established models = 0.120763 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.120763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107477Jy sigma=0.001068 ! Fit after self-cal, rms=0.107229Jy sigma=0.001066 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=7.892 mas, bpa=5.202 degrees ! Estimated noise=655.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230982 Jy ! Component: 100 - total flux cleaned = 0.0347037 Jy ! Component: 150 - total flux cleaned = 0.0413195 Jy ! Component: 200 - total flux cleaned = 0.0452578 Jy ! Total flux subtracted in 200 components = 0.0452578 Jy ! Clean residual min=-0.010386 max=0.015575 Jy/beam ! Clean residual mean=0.000006 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 0.16602 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.16602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100253Jy sigma=0.001074 ! Fit after self-cal, rms=0.100178Jy sigma=0.001074 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.00* HN 0.87 KP 0.96 ! LA 0.95 MK 0.97 NL 1.72 OV 0.88 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 2.95 FD 1.00* HN 0.95 KP 0.89 ! LA 0.98 MK 0.90 NL 1.53 OV 0.90 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 0.97 KP 0.77 ! LA 0.75 MK 0.89 NL 1.45 OV 0.83 ! PT 0.94 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* HN 0.91 KP 0.72 ! LA 0.86 MK 0.91 NL 0.95 OV 0.86 ! PT 1.01 SC 0.98 ! ! ! Fit before self-cal, rms=0.100178Jy sigma=0.001074 ! Fit after self-cal, rms=0.118483Jy sigma=0.000883 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.609 mas, bmaj=7.997 mas, bpa=3.61 degrees ! Estimated noise=669.808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277693 Jy ! Component: 100 - total flux cleaned = 0.0027947 Jy ! Component: 150 - total flux cleaned = 0.00256647 Jy ! Component: 200 - total flux cleaned = 0.00246869 Jy ! Total flux subtracted in 200 components = 0.00246869 Jy ! Clean residual min=-0.009194 max=0.009574 Jy/beam ! Clean residual mean=0.000003 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.168489 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.168489 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117715Jy sigma=0.000882 ! Fit after self-cal, rms=0.118090Jy sigma=0.000879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118090Jy sigma=0.000879 ! Fit after self-cal, rms=0.131346Jy sigma=0.000811 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.537 mas, bmaj=7.955 mas, bpa=2.482 degrees ! Estimated noise=661.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017731 Jy ! Component: 100 - total flux cleaned = 0.00196194 Jy ! Component: 150 - total flux cleaned = 0.00196344 Jy ! Component: 200 - total flux cleaned = 0.00196789 Jy ! Total flux subtracted in 200 components = 0.00196789 Jy ! Clean residual min=-0.004017 max=0.006873 Jy/beam ! Clean residual mean=0.000000 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 0.170457 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.170457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131135Jy sigma=0.000809 ! Fit after self-cal, rms=0.131322Jy sigma=0.000808 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00580038 Jy ! Component: 100 - total flux cleaned = 0.00872275 Jy ! Component: 150 - total flux cleaned = 0.00996604 Jy ! Component: 200 - total flux cleaned = 0.0104861 Jy ! Total flux subtracted in 200 components = 0.0104861 Jy ! Clean residual min=-0.003328 max=0.003853 Jy/beam ! Clean residual mean=-0.000001 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.180943 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 79 components and 0.180943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130975Jy sigma=0.000802 ! Fit after self-cal, rms=0.130919Jy sigma=0.000802 ! Inverting map ! Added new window around map position (8.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415868 Jy ! Component: 100 - total flux cleaned = 0.00481806 Jy ! Component: 150 - total flux cleaned = 0.00508384 Jy ! Component: 200 - total flux cleaned = 0.00520078 Jy ! Total flux subtracted in 200 components = 0.00520078 Jy ! Clean residual min=-0.002746 max=0.002920 Jy/beam ! Clean residual mean=-0.000002 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.186144 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 99 components and 0.186144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130646Jy sigma=0.000800 ! Fit after self-cal, rms=0.130606Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130606Jy sigma=0.000800 ! Fit after self-cal, rms=0.136458Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.515 mas, bmaj=7.909 mas, bpa=2.493 degrees ! Estimated noise=664.983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282484 Jy ! Component: 100 - total flux cleaned = 0.00358016 Jy ! Component: 150 - total flux cleaned = 0.00382394 Jy ! Component: 200 - total flux cleaned = 0.00387734 Jy ! Total flux subtracted in 200 components = 0.00387734 Jy ! Clean residual min=-0.002762 max=0.002631 Jy/beam ! Clean residual mean=-0.000001 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.190021 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.190021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136202Jy sigma=0.000798 ! Fit after self-cal, rms=0.136187Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859934 Jy ! Component: 100 - total flux cleaned = 0.000762511 Jy ! Component: 150 - total flux cleaned = 0.000852393 Jy ! Component: 200 - total flux cleaned = 0.000936149 Jy ! Total flux subtracted in 200 components = 0.000936149 Jy ! Clean residual min=-0.002527 max=0.002593 Jy/beam ! Clean residual mean=-0.000001 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.190957 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 126 components and 0.190957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136083Jy sigma=0.000798 ! Fit after self-cal, rms=0.136079Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136079Jy sigma=0.000798 ! Fit after self-cal, rms=0.139508Jy sigma=0.000797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=14.02 mas, bpa=5.615 degrees ! Estimated noise=815.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175793 Jy ! Component: 100 - total flux cleaned = 0.0019533 Jy ! Component: 150 - total flux cleaned = 0.00205587 Jy ! Component: 200 - total flux cleaned = 0.00219101 Jy ! Total flux subtracted in 200 components = 0.00219101 Jy ! Clean residual min=-0.002645 max=0.003169 Jy/beam ! Clean residual mean=-0.000000 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.193148 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 145 components and 0.193148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139285Jy sigma=0.000798 ! Fit after self-cal, rms=0.139277Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372816 Jy ! Component: 100 - total flux cleaned = 0.000372433 Jy ! Component: 150 - total flux cleaned = 0.000370765 Jy ! Component: 200 - total flux cleaned = 0.000337019 Jy ! Total flux subtracted in 200 components = 0.000337019 Jy ! Clean residual min=-0.002716 max=0.003034 Jy/beam ! Clean residual mean=-0.000000 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.193485 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 171 components and 0.193485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139193Jy sigma=0.000798 ! Fit after self-cal, rms=0.139195Jy sigma=0.000798 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=7.897 mas, bpa=2.668 degrees ! Estimated noise=670.178 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 7.897 at 2.668 degrees (North through East) ! Clean map min=-0.0050351 max=0.11047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.519 mas, bpa=-0.2375 degrees ! Estimated noise=917.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874442 Jy ! Component: 100 - total flux cleaned = 0.124905 Jy ! Component: 150 - total flux cleaned = 0.145534 Jy ! Component: 200 - total flux cleaned = 0.157649 Jy ! Total flux subtracted in 200 components = 0.157649 Jy ! Clean residual min=-0.006009 max=0.008503 Jy/beam ! Clean residual mean=0.000008 rms=0.001380 Jy/beam ! Combined flux in latest and established models = 0.157649 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.157649 Jy ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=7.897 mas, bpa=2.668 degrees ! Estimated noise=670.178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108708 Jy ! Component: 100 - total flux cleaned = 0.018144 Jy ! Component: 150 - total flux cleaned = 0.0232573 Jy ! Component: 200 - total flux cleaned = 0.0261716 Jy ! Total flux subtracted in 200 components = 0.0261716 Jy ! Clean residual min=-0.005161 max=0.003893 Jy/beam ! Clean residual mean=0.000002 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.183821 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 78 components and 0.183821 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=14.02 mas, bpa=5.615 degrees ! Estimated noise=815.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277152 Jy ! Component: 100 - total flux cleaned = 0.00430039 Jy ! Component: 150 - total flux cleaned = 0.00532977 Jy ! Component: 200 - total flux cleaned = 0.005911 Jy ! Total flux subtracted in 200 components = 0.005911 Jy ! Clean residual min=-0.003508 max=0.003402 Jy/beam ! Clean residual mean=0.000001 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.189732 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510827 Jy ! Component: 100 - total flux cleaned = 0.00103409 Jy ! Component: 150 - total flux cleaned = 0.00136278 Jy ! Component: 200 - total flux cleaned = 0.00154249 Jy ! Total flux subtracted in 200 components = 0.00154249 Jy ! Clean residual min=-0.002955 max=0.003148 Jy/beam ! Clean residual mean=0.000001 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.191274 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 158 components and 0.191274 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=7.897 mas, bpa=2.668 degrees ! Estimated noise=670.178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102398 Jy ! Component: 100 - total flux cleaned = -0.000742658 Jy ! Component: 150 - total flux cleaned = -0.000423264 Jy ! Component: 200 - total flux cleaned = -0.000191069 Jy ! Total flux subtracted in 200 components = -0.000191069 Jy ! Clean residual min=-0.003039 max=0.002590 Jy/beam ! Clean residual mean=0.000000 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.191083 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 174 components and 0.191083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139241Jy sigma=0.000798 ! Fit after self-cal, rms=0.139225Jy sigma=0.000798 wmodel J1421-0643_S_2015_01_22_pus_map.mod ! Writing 174 model components to file: J1421-0643_S_2015_01_22_pus_map.mod wobs J1421-0643_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1421-0643_S_2015_01_22_pus_uvs.fits wwins J1421-0643_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1421-0643_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000989178 Jy ! Component: 100 - total flux cleaned = -0.00157733 Jy ! Component: 150 - total flux cleaned = -0.00226022 Jy ! Component: 200 - total flux cleaned = -0.00298812 Jy ! Component: 250 - total flux cleaned = -0.00368172 Jy ! Component: 300 - total flux cleaned = -0.00408704 Jy ! Component: 350 - total flux cleaned = -0.00433646 Jy ! Component: 400 - total flux cleaned = -0.00454524 Jy ! Component: 450 - total flux cleaned = -0.00478119 Jy ! Component: 500 - total flux cleaned = -0.00501053 Jy ! Component: 550 - total flux cleaned = -0.00520203 Jy ! Component: 600 - total flux cleaned = -0.00538995 Jy ! Component: 650 - total flux cleaned = -0.00554307 Jy ! Component: 700 - total flux cleaned = -0.00563309 Jy ! Component: 750 - total flux cleaned = -0.00569132 Jy ! Component: 800 - total flux cleaned = -0.0057197 Jy ! Component: 850 - total flux cleaned = -0.00577593 Jy ! Component: 900 - total flux cleaned = -0.00580314 Jy ! Component: 950 - total flux cleaned = -0.00588403 Jy ! Component: 1000 - total flux cleaned = -0.00588369 Jy ! Component: 1050 - total flux cleaned = -0.00598819 Jy ! Component: 1100 - total flux cleaned = -0.00614208 Jy ! Component: 1150 - total flux cleaned = -0.00616686 Jy ! Component: 1200 - total flux cleaned = -0.00614209 Jy ! Component: 1250 - total flux cleaned = -0.00619157 Jy ! Component: 1300 - total flux cleaned = -0.00623973 Jy ! Component: 1350 - total flux cleaned = -0.00609626 Jy ! Component: 1400 - total flux cleaned = -0.00616687 Jy ! Component: 1450 - total flux cleaned = -0.00614395 Jy ! Component: 1500 - total flux cleaned = -0.00612081 Jy ! Component: 1550 - total flux cleaned = -0.00607541 Jy ! Component: 1600 - total flux cleaned = -0.0060975 Jy ! Component: 1650 - total flux cleaned = -0.00600843 Jy ! Component: 1700 - total flux cleaned = -0.00596461 Jy ! Component: 1750 - total flux cleaned = -0.0059 Jy ! Component: 1800 - total flux cleaned = -0.00587877 Jy ! Component: 1850 - total flux cleaned = -0.0058359 Jy ! Component: 1900 - total flux cleaned = -0.00577321 Jy ! Component: 1950 - total flux cleaned = -0.00573186 Jy ! Component: 2000 - total flux cleaned = -0.00577276 Jy ! Component: 2050 - total flux cleaned = -0.00569221 Jy ! Component: 2100 - total flux cleaned = -0.0056922 Jy ! Component: 2150 - total flux cleaned = -0.00561368 Jy ! Component: 2200 - total flux cleaned = -0.00565249 Jy ! Component: 2250 - total flux cleaned = -0.005614 Jy ! Component: 2300 - total flux cleaned = -0.00553781 Jy ! Component: 2350 - total flux cleaned = -0.00550033 Jy ! Component: 2400 - total flux cleaned = -0.00546324 Jy ! Component: 2450 - total flux cleaned = -0.00540786 Jy ! Component: 2500 - total flux cleaned = -0.00540791 Jy ! Component: 2550 - total flux cleaned = -0.00533545 Jy ! Component: 2600 - total flux cleaned = -0.00529975 Jy ! Component: 2650 - total flux cleaned = -0.00526431 Jy ! Component: 2700 - total flux cleaned = -0.00521155 Jy ! Component: 2750 - total flux cleaned = -0.00517647 Jy ! Component: 2800 - total flux cleaned = -0.00510725 Jy ! Component: 2850 - total flux cleaned = -0.00505605 Jy ! Component: 2900 - total flux cleaned = -0.00502205 Jy ! Component: 2950 - total flux cleaned = -0.00493803 Jy ! Component: 3000 - total flux cleaned = -0.00490503 Jy ! Component: 3050 - total flux cleaned = -0.00485575 Jy ! Component: 3100 - total flux cleaned = -0.00485551 Jy ! Component: 3150 - total flux cleaned = -0.00487143 Jy ! Component: 3200 - total flux cleaned = -0.00480713 Jy ! Component: 3250 - total flux cleaned = -0.00474357 Jy ! Component: 3300 - total flux cleaned = -0.00479083 Jy ! Component: 3350 - total flux cleaned = -0.00474389 Jy ! Component: 3400 - total flux cleaned = -0.00474373 Jy ! Component: 3450 - total flux cleaned = -0.00478994 Jy ! Component: 3500 - total flux cleaned = -0.00474403 Jy ! Component: 3550 - total flux cleaned = -0.00475924 Jy ! Component: 3600 - total flux cleaned = -0.00480435 Jy ! Component: 3650 - total flux cleaned = -0.00481918 Jy ! Component: 3700 - total flux cleaned = -0.00483421 Jy ! Component: 3750 - total flux cleaned = -0.00484892 Jy ! Component: 3800 - total flux cleaned = -0.00487815 Jy ! Component: 3850 - total flux cleaned = -0.00483451 Jy ! Component: 3900 - total flux cleaned = -0.00484877 Jy ! Component: 3950 - total flux cleaned = -0.00484899 Jy ! Component: 4000 - total flux cleaned = -0.00482065 Jy ! Component: 4050 - total flux cleaned = -0.00480661 Jy ! Total flux subtracted in 4096 components = -0.00479258 Jy ! Clean residual min=-0.000809 max=0.000865 Jy/beam ! Clean residual mean=-0.000000 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.18629 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 452 components and 0.18629 Jy ![Exited script file: muppet] wmap "J1421-0643_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 7.897 at 2.668 degrees (North through East) ! Clean map min=-0.0044761 max=0.11028 Jy/beam ! Writing clean map to FITS file: J1421-0643_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.110282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000262033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.712809 0.712809 1.42562 2.85124 5.70247 11.4049 22.8099 45.6198 91.2396 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 7.897 at 2.668 degrees (North through East) ! Clean map min=-0.0044761 max=0.11028 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1421-0643_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:56:15 2017