! Started logfile: J1419+5423_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:30:12 2016 obs J1419+5423_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1419+5423_S_2014_08_05_pus_uva.fits ! AN table 1: 33 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712458 visibilities/baseline/integration-bin. ! Found source: J1419+5423 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 4232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+5423_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.309988Jy sigma=0.003356 ! Fit after self-cal, rms=0.277968Jy sigma=0.002992 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=7.293 mas, bpa=54.56 degrees ! Estimated noise=1254.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.590231 Jy ! Component: 100 - total flux cleaned = 0.71922 Jy ! Total flux subtracted in 100 components = 0.71922 Jy ! Clean residual min=-0.023905 max=0.038523 Jy/beam ! Clean residual mean=-0.000075 rms=0.007069 Jy/beam ! Combined flux in latest and established models = 0.71922 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.71922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163318Jy sigma=0.001587 ! Fit after self-cal, rms=0.163315Jy sigma=0.001587 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.705 mas, bmaj=7.81 mas, bpa=56.83 degrees ! Estimated noise=1003.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560187 Jy ! Component: 100 - total flux cleaned = 0.0891221 Jy ! Component: 150 - total flux cleaned = 0.110799 Jy ! Component: 200 - total flux cleaned = 0.125223 Jy ! Total flux subtracted in 200 components = 0.125223 Jy ! Clean residual min=-0.022095 max=0.035845 Jy/beam ! Clean residual mean=0.000049 rms=0.005388 Jy/beam ! Combined flux in latest and established models = 0.844443 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 0.844443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138893Jy sigma=0.001342 ! Fit after self-cal, rms=0.138636Jy sigma=0.001339 ! Inverting map ! Added new window around map position (11.5, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031611 Jy ! Component: 100 - total flux cleaned = 0.0477543 Jy ! Component: 150 - total flux cleaned = 0.0585836 Jy ! Component: 200 - total flux cleaned = 0.0641219 Jy ! Total flux subtracted in 200 components = 0.0641219 Jy ! Clean residual min=-0.017650 max=0.019963 Jy/beam ! Clean residual mean=0.000106 rms=0.004108 Jy/beam ! Combined flux in latest and established models = 0.908565 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 70 components and 0.908565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130262Jy sigma=0.001255 ! Fit after self-cal, rms=0.129483Jy sigma=0.001246 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.86 HN 0.99 KP 1.08 ! LA 1.11 MK 1.00* NL 0.97 OV 0.98 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.03 ! LA 1.06 MK 1.00* NL 1.02 OV 1.01 ! PT 1.03 SC 1.11 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.15 HN 1.01 KP 0.90 ! LA 0.85 MK 1.00* NL 0.99 OV 0.94 ! PT 1.00 SC 1.08 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.00 KP 0.87 ! LA 0.81 MK 1.00* NL 1.06 OV 0.98 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.129483Jy sigma=0.001246 ! Fit after self-cal, rms=0.090208Jy sigma=0.000871 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.754 mas, bmaj=7.825 mas, bpa=56.94 degrees ! Estimated noise=999.561 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218993 Jy ! Component: 100 - total flux cleaned = 0.00443586 Jy ! Component: 150 - total flux cleaned = 0.00646076 Jy ! Component: 200 - total flux cleaned = 0.00749229 Jy ! Total flux subtracted in 200 components = 0.00749229 Jy ! Clean residual min=-0.010244 max=0.009859 Jy/beam ! Clean residual mean=-0.000026 rms=0.002403 Jy/beam ! Combined flux in latest and established models = 0.916057 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.916057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087820Jy sigma=0.000850 ! Fit after self-cal, rms=0.087690Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087690Jy sigma=0.000848 ! Fit after self-cal, rms=0.083792Jy sigma=0.000810 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.71 mas, bmaj=7.913 mas, bpa=56.24 degrees ! Estimated noise=997.727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00484595 Jy ! Component: 100 - total flux cleaned = -0.00416229 Jy ! Component: 150 - total flux cleaned = -0.00343388 Jy ! Component: 200 - total flux cleaned = -0.00298278 Jy ! Total flux subtracted in 200 components = -0.00298278 Jy ! Clean residual min=-0.006225 max=0.007012 Jy/beam ! Clean residual mean=0.000006 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.913074 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 114 components and 0.913074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082556Jy sigma=0.000796 ! Fit after self-cal, rms=0.082535Jy sigma=0.000796 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696444 Jy ! Component: 100 - total flux cleaned = 0.0116549 Jy ! Component: 150 - total flux cleaned = 0.0153353 Jy ! Component: 200 - total flux cleaned = 0.0167154 Jy ! Total flux subtracted in 200 components = 0.0167154 Jy ! Clean residual min=-0.005455 max=0.004005 Jy/beam ! Clean residual mean=0.000022 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.92979 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 149 components and 0.92979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081695Jy sigma=0.000786 ! Fit after self-cal, rms=0.081675Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081675Jy sigma=0.000786 ! Fit after self-cal, rms=0.081470Jy sigma=0.000783 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.709 mas, bmaj=7.932 mas, bpa=56.04 degrees ! Estimated noise=995.703 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00454428 Jy ! Component: 100 - total flux cleaned = -0.00368964 Jy ! Component: 150 - total flux cleaned = -0.00326971 Jy ! Component: 200 - total flux cleaned = -0.00288671 Jy ! Total flux subtracted in 200 components = -0.00288671 Jy ! Clean residual min=-0.004414 max=0.003771 Jy/beam ! Clean residual mean=0.000026 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.926903 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 0.926903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081026Jy sigma=0.000779 ! Fit after self-cal, rms=0.081025Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000561065 Jy ! Component: 100 - total flux cleaned = 0.000967742 Jy ! Component: 150 - total flux cleaned = 0.00140271 Jy ! Component: 200 - total flux cleaned = 0.00173054 Jy ! Total flux subtracted in 200 components = 0.00173054 Jy ! Clean residual min=-0.004162 max=0.003682 Jy/beam ! Clean residual mean=0.000028 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.928634 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 175 components and 0.928634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080889Jy sigma=0.000778 ! Fit after self-cal, rms=0.080885Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080885Jy sigma=0.000777 ! Fit after self-cal, rms=0.080884Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.352 mas, bmaj=10.25 mas, bpa=74.54 degrees ! Estimated noise=1120.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188959 Jy ! Component: 100 - total flux cleaned = -0.0017024 Jy ! Component: 150 - total flux cleaned = -0.00180121 Jy ! Component: 200 - total flux cleaned = -0.00180059 Jy ! Total flux subtracted in 200 components = -0.00180059 Jy ! Clean residual min=-0.003834 max=0.003706 Jy/beam ! Clean residual mean=0.000054 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.926833 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 207 components and 0.926833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080738Jy sigma=0.000775 ! Fit after self-cal, rms=0.080740Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222452 Jy ! Component: 100 - total flux cleaned = 0.000221527 Jy ! Component: 150 - total flux cleaned = 0.000188355 Jy ! Component: 200 - total flux cleaned = 0.000219364 Jy ! Total flux subtracted in 200 components = 0.000219364 Jy ! Clean residual min=-0.003751 max=0.003650 Jy/beam ! Clean residual mean=0.000054 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.927052 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 220 components and 0.927052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080703Jy sigma=0.000775 ! Fit after self-cal, rms=0.080701Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.708 mas, bmaj=7.946 mas, bpa=55.9 degrees ! Estimated noise=994.834 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.708 x 7.946 at 55.9 degrees (North through East) ! Clean map min=-0.0035513 max=0.74845 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080701Jy sigma=0.000775 ! Fit after self-cal, rms=0.074457Jy sigma=0.000712 ! Inverting map and beam ! Estimated beam: bmin=4.711 mas, bmaj=7.952 mas, bpa=55.82 degrees ! Estimated noise=994.085 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231694 Jy ! Component: 100 - total flux cleaned = -0.00319665 Jy ! Component: 150 - total flux cleaned = -0.0035379 Jy ! Component: 200 - total flux cleaned = -0.00373891 Jy ! Total flux subtracted in 200 components = -0.00373891 Jy ! Clean residual min=-0.003228 max=0.003520 Jy/beam ! Clean residual mean=0.000029 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.923314 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 234 components and 0.923314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074314Jy sigma=0.000710 ! Fit after self-cal, rms=0.074311Jy sigma=0.000710 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126848 Jy ! Component: 100 - total flux cleaned = -0.000168187 Jy ! Component: 150 - total flux cleaned = -0.000248136 Jy ! Component: 200 - total flux cleaned = -0.000360417 Jy ! Total flux subtracted in 200 components = -0.000360417 Jy ! Clean residual min=-0.003214 max=0.003457 Jy/beam ! Clean residual mean=0.000029 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 0.922953 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 245 components and 0.922953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074267Jy sigma=0.000710 ! Fit after self-cal, rms=0.074266Jy sigma=0.000710 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074266Jy sigma=0.000710 ! Fit after self-cal, rms=0.074314Jy sigma=0.000709 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.844 mas, bmaj=7.428 mas, bpa=53.78 degrees ! Estimated noise=1241.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.584165 Jy ! Component: 100 - total flux cleaned = 0.71157 Jy ! Component: 150 - total flux cleaned = 0.75146 Jy ! Component: 200 - total flux cleaned = 0.77816 Jy ! Total flux subtracted in 200 components = 0.77816 Jy ! Clean residual min=-0.008912 max=0.015048 Jy/beam ! Clean residual mean=-0.000054 rms=0.002870 Jy/beam ! Combined flux in latest and established models = 0.77816 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.77816 Jy ! Inverting map and beam ! Estimated beam: bmin=4.712 mas, bmaj=7.96 mas, bpa=55.74 degrees ! Estimated noise=993.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296407 Jy ! Component: 100 - total flux cleaned = 0.0499709 Jy ! Component: 150 - total flux cleaned = 0.064952 Jy ! Component: 200 - total flux cleaned = 0.0764357 Jy ! Total flux subtracted in 200 components = 0.0764357 Jy ! Clean residual min=-0.005584 max=0.006929 Jy/beam ! Clean residual mean=-0.000036 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.854596 Jy ! Adding 111 model components to the UV plane model. ! The established model now contains 124 components and 0.854596 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.371 mas, bmaj=10.26 mas, bpa=74.16 degrees ! Estimated noise=1117.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134216 Jy ! Component: 100 - total flux cleaned = 0.0232576 Jy ! Component: 150 - total flux cleaned = 0.0309197 Jy ! Component: 200 - total flux cleaned = 0.0370204 Jy ! Total flux subtracted in 200 components = 0.0370204 Jy ! Clean residual min=-0.004852 max=0.005098 Jy/beam ! Clean residual mean=0.000001 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 0.891617 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495819 Jy ! Component: 100 - total flux cleaned = 0.00905228 Jy ! Component: 150 - total flux cleaned = 0.0124656 Jy ! Component: 200 - total flux cleaned = 0.0153345 Jy ! Total flux subtracted in 200 components = 0.0153345 Jy ! Clean residual min=-0.003713 max=0.003742 Jy/beam ! Clean residual mean=0.000028 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.906951 Jy ! Adding 161 model components to the UV plane model. ! The established model now contains 271 components and 0.906951 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.712 mas, bmaj=7.96 mas, bpa=55.74 degrees ! Estimated noise=993.616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241095 Jy ! Component: 100 - total flux cleaned = 0.00434768 Jy ! Component: 150 - total flux cleaned = 0.00590025 Jy ! Component: 200 - total flux cleaned = 0.0069346 Jy ! Total flux subtracted in 200 components = 0.0069346 Jy ! Clean residual min=-0.003584 max=0.003104 Jy/beam ! Clean residual mean=0.000022 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.913886 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 295 components and 0.913886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074344Jy sigma=0.000710 ! Fit after self-cal, rms=0.074316Jy sigma=0.000710 wmodel J1419+5423_S_2014_08_05_pus_map.mod ! Writing 295 model components to file: J1419+5423_S_2014_08_05_pus_map.mod wobs J1419+5423_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1419+5423_S_2014_08_05_pus_uvs.fits wwins J1419+5423_S_2014_08_05_pus_map.win ! wwins: Wrote 3 windows to J1419+5423_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000663916 Jy ! Component: 100 - total flux cleaned = -6.52773e-05 Jy ! Component: 150 - total flux cleaned = 0.000604914 Jy ! Component: 200 - total flux cleaned = 0.000950224 Jy ! Component: 250 - total flux cleaned = 0.00100088 Jy ! Component: 300 - total flux cleaned = 0.00100136 Jy ! Component: 350 - total flux cleaned = 0.000957274 Jy ! Component: 400 - total flux cleaned = 0.000914198 Jy ! Component: 450 - total flux cleaned = 0.000872773 Jy ! Component: 500 - total flux cleaned = 0.000832961 Jy ! Component: 550 - total flux cleaned = 0.000753427 Jy ! Component: 600 - total flux cleaned = 0.000675874 Jy ! Component: 650 - total flux cleaned = 0.000676267 Jy ! Component: 700 - total flux cleaned = 0.00067689 Jy ! Component: 750 - total flux cleaned = 0.000749732 Jy ! Component: 800 - total flux cleaned = 0.000785475 Jy ! Component: 850 - total flux cleaned = 0.000714145 Jy ! Component: 900 - total flux cleaned = 0.000679549 Jy ! Component: 950 - total flux cleaned = 0.000679916 Jy ! Component: 1000 - total flux cleaned = 0.000713994 Jy ! Component: 1050 - total flux cleaned = 0.000681227 Jy ! Component: 1100 - total flux cleaned = 0.000713854 Jy ! Component: 1150 - total flux cleaned = 0.000650233 Jy ! Component: 1200 - total flux cleaned = 0.000714082 Jy ! Component: 1250 - total flux cleaned = 0.000744908 Jy ! Component: 1300 - total flux cleaned = 0.000744753 Jy ! Component: 1350 - total flux cleaned = 0.000714785 Jy ! Component: 1400 - total flux cleaned = 0.00077476 Jy ! Component: 1450 - total flux cleaned = 0.000745295 Jy ! Component: 1500 - total flux cleaned = 0.000862297 Jy ! Component: 1550 - total flux cleaned = 0.00080484 Jy ! Component: 1600 - total flux cleaned = 0.00089005 Jy ! Component: 1650 - total flux cleaned = 0.000917912 Jy ! Component: 1700 - total flux cleaned = 0.000972855 Jy ! Component: 1750 - total flux cleaned = 0.00102718 Jy ! Component: 1800 - total flux cleaned = 0.0010811 Jy ! Component: 1850 - total flux cleaned = 0.00116057 Jy ! Component: 1900 - total flux cleaned = 0.00121377 Jy ! Component: 1950 - total flux cleaned = 0.00129181 Jy ! Component: 2000 - total flux cleaned = 0.0013178 Jy ! Component: 2050 - total flux cleaned = 0.00139442 Jy ! Component: 2100 - total flux cleaned = 0.00141943 Jy ! Component: 2150 - total flux cleaned = 0.00144425 Jy ! Component: 2200 - total flux cleaned = 0.00149351 Jy ! Component: 2250 - total flux cleaned = 0.00151742 Jy ! Component: 2300 - total flux cleaned = 0.00144564 Jy ! Component: 2350 - total flux cleaned = 0.00156533 Jy ! Component: 2400 - total flux cleaned = 0.00163619 Jy ! Component: 2450 - total flux cleaned = 0.00156631 Jy ! Component: 2500 - total flux cleaned = 0.00182037 Jy ! Component: 2550 - total flux cleaned = 0.00175152 Jy ! Component: 2600 - total flux cleaned = 0.00179663 Jy ! Component: 2650 - total flux cleaned = 0.00188611 Jy ! Component: 2700 - total flux cleaned = 0.00184191 Jy ! Component: 2750 - total flux cleaned = 0.00197368 Jy ! Component: 2800 - total flux cleaned = 0.00201727 Jy ! Component: 2850 - total flux cleaned = 0.00206046 Jy ! Component: 2900 - total flux cleaned = 0.0021245 Jy ! Component: 2950 - total flux cleaned = 0.00223028 Jy ! Component: 3000 - total flux cleaned = 0.00229304 Jy ! Component: 3050 - total flux cleaned = 0.00237607 Jy ! Component: 3100 - total flux cleaned = 0.00239686 Jy ! Component: 3150 - total flux cleaned = 0.00241736 Jy ! Component: 3200 - total flux cleaned = 0.00251852 Jy ! Component: 3250 - total flux cleaned = 0.00253835 Jy ! Component: 3300 - total flux cleaned = 0.00253832 Jy ! Component: 3350 - total flux cleaned = 0.00251886 Jy ! Component: 3400 - total flux cleaned = 0.00253846 Jy ! Component: 3450 - total flux cleaned = 0.0025579 Jy ! Component: 3500 - total flux cleaned = 0.00259641 Jy ! Component: 3550 - total flux cleaned = 0.00261545 Jy ! Component: 3600 - total flux cleaned = 0.00261542 Jy ! Component: 3650 - total flux cleaned = 0.00263429 Jy ! Component: 3700 - total flux cleaned = 0.00257864 Jy ! Component: 3750 - total flux cleaned = 0.00263423 Jy ! Component: 3800 - total flux cleaned = 0.00267107 Jy ! Component: 3850 - total flux cleaned = 0.00268936 Jy ! Component: 3900 - total flux cleaned = 0.00267099 Jy ! Component: 3950 - total flux cleaned = 0.00272504 Jy ! Component: 4000 - total flux cleaned = 0.00270725 Jy ! Component: 4050 - total flux cleaned = 0.00276052 Jy ! Total flux subtracted in 4096 components = 0.00274305 Jy ! Clean residual min=-0.001108 max=0.000976 Jy/beam ! Clean residual mean=0.000012 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.916629 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 582 components and 0.916629 Jy ![Exited script file: muppet] wmap "J1419+5423_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.712 x 7.96 at 55.74 degrees (North through East) ! Clean map min=-0.0023016 max=0.7494 Jy/beam ! Writing clean map to FITS file: J1419+5423_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.7494 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000332288 device "J1419+5423_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1419+5423_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.133022 0.133022 0.266043 0.532086 1.06417 2.12835 4.25669 8.51338 17.0268 34.0535 68.1071 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.749 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.712 x 7.96 at 55.74 degrees (North through East) ! Clean map min=-0.0023016 max=0.7494 Jy/beam quit ! Quitting program ! Log file J1419+5423_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:30:18 2016