! Started logfile: J1419+3821_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:18 2017 obs J1419+3821_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1419+3821_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.537037 visibilities/baseline/integration-bin. ! Found source: J1419+3821 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1419+3821_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.528536Jy sigma=0.007958 ! Fit after self-cal, rms=0.458340Jy sigma=0.007079 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.422 mas, bmaj=4.249 mas, bpa=39.89 degrees ! Estimated noise=1101.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.420147 Jy ! Component: 100 - total flux cleaned = 0.511766 Jy ! Total flux subtracted in 100 components = 0.511766 Jy ! Clean residual min=-0.015784 max=0.025553 Jy/beam ! Clean residual mean=-0.000019 rms=0.004714 Jy/beam ! Combined flux in latest and established models = 0.511766 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.511766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103227Jy sigma=0.001317 ! Fit after self-cal, rms=0.103225Jy sigma=0.001317 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.685 mas, bmaj=5.726 mas, bpa=41.41 degrees ! Estimated noise=743.674 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029634 Jy ! Component: 100 - total flux cleaned = 0.0463696 Jy ! Component: 150 - total flux cleaned = 0.0571336 Jy ! Component: 200 - total flux cleaned = 0.0640583 Jy ! Total flux subtracted in 200 components = 0.0640583 Jy ! Clean residual min=-0.012971 max=0.016700 Jy/beam ! Clean residual mean=-0.000048 rms=0.003711 Jy/beam ! Combined flux in latest and established models = 0.575825 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.575825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090619Jy sigma=0.001224 ! Fit after self-cal, rms=0.090538Jy sigma=0.001224 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.83 KP 1.00* LA 1.03 ! MK 0.97 NL 0.98 OV 0.97 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 KP 1.00* LA 1.00 ! MK 0.98 NL 1.04 OV 1.00 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 KP 1.00* LA 0.81 ! MK 0.99 NL 1.00 OV 0.93 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00 KP 1.00* LA 0.88 ! MK 0.99 NL 1.10 OV 0.99 PT 0.99 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.090538Jy sigma=0.001224 ! Fit after self-cal, rms=0.067386Jy sigma=0.000920 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.683 mas, bmaj=5.75 mas, bpa=39.95 degrees ! Estimated noise=743.439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00438074 Jy ! Component: 100 - total flux cleaned = -0.00476364 Jy ! Component: 150 - total flux cleaned = -0.00508828 Jy ! Component: 200 - total flux cleaned = -0.00548033 Jy ! Total flux subtracted in 200 components = -0.00548033 Jy ! Clean residual min=-0.005314 max=0.005314 Jy/beam ! Clean residual mean=-0.000022 rms=0.001269 Jy/beam ! Combined flux in latest and established models = 0.570344 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.570344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066982Jy sigma=0.000911 ! Fit after self-cal, rms=0.066782Jy sigma=0.000911 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066782Jy sigma=0.000911 ! Fit after self-cal, rms=0.066051Jy sigma=0.000900 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.681 mas, bmaj=5.737 mas, bpa=40.36 degrees ! Estimated noise=741.972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163365 Jy ! Component: 100 - total flux cleaned = -0.00205633 Jy ! Component: 150 - total flux cleaned = -0.00244855 Jy ! Component: 200 - total flux cleaned = -0.00280908 Jy ! Total flux subtracted in 200 components = -0.00280908 Jy ! Clean residual min=-0.003747 max=0.003179 Jy/beam ! Clean residual mean=0.000008 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.567535 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 0.567535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065851Jy sigma=0.000897 ! Fit after self-cal, rms=0.065852Jy sigma=0.000897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000404931 Jy ! Component: 100 - total flux cleaned = -0.000711996 Jy ! Component: 150 - total flux cleaned = -0.000944281 Jy ! Component: 200 - total flux cleaned = -0.00121812 Jy ! Total flux subtracted in 200 components = -0.00121812 Jy ! Clean residual min=-0.003492 max=0.003111 Jy/beam ! Clean residual mean=0.000008 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.566317 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 21 components and 0.566317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065737Jy sigma=0.000896 ! Fit after self-cal, rms=0.065739Jy sigma=0.000896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065739Jy sigma=0.000896 ! Fit after self-cal, rms=0.065580Jy sigma=0.000895 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.68 mas, bmaj=5.736 mas, bpa=40.43 degrees ! Estimated noise=741.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00132505 Jy ! Component: 100 - total flux cleaned = -0.00173402 Jy ! Component: 150 - total flux cleaned = -0.00204721 Jy ! Component: 200 - total flux cleaned = -0.00233755 Jy ! Total flux subtracted in 200 components = -0.00233755 Jy ! Clean residual min=-0.003248 max=0.002604 Jy/beam ! Clean residual mean=0.000007 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.56398 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 21 components and 0.56398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065449Jy sigma=0.000893 ! Fit after self-cal, rms=0.065444Jy sigma=0.000893 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268556 Jy ! Component: 100 - total flux cleaned = -0.000471516 Jy ! Component: 150 - total flux cleaned = -0.000708688 Jy ! Component: 200 - total flux cleaned = -0.000887457 Jy ! Total flux subtracted in 200 components = -0.000887457 Jy ! Clean residual min=-0.003028 max=0.002637 Jy/beam ! Clean residual mean=0.000007 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.563092 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.563092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065367Jy sigma=0.000893 ! Fit after self-cal, rms=0.065370Jy sigma=0.000893 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065370Jy sigma=0.000893 ! Fit after self-cal, rms=0.065253Jy sigma=0.000892 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.287 mas, bmaj=9.991 mas, bpa=57.13 degrees ! Estimated noise=837.592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012849 Jy ! Component: 100 - total flux cleaned = -0.00149704 Jy ! Component: 150 - total flux cleaned = -0.00163044 Jy ! Component: 200 - total flux cleaned = -0.00177671 Jy ! Total flux subtracted in 200 components = -0.00177671 Jy ! Clean residual min=-0.002462 max=0.002202 Jy/beam ! Clean residual mean=0.000010 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.561315 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 21 components and 0.561315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065215Jy sigma=0.000891 ! Fit after self-cal, rms=0.065208Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000183556 Jy ! Component: 100 - total flux cleaned = -0.000266918 Jy ! Component: 150 - total flux cleaned = -0.000380874 Jy ! Component: 200 - total flux cleaned = -0.000469276 Jy ! Total flux subtracted in 200 components = -0.000469276 Jy ! Clean residual min=-0.002408 max=0.002163 Jy/beam ! Clean residual mean=0.000010 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.560846 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 22 components and 0.560846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065191Jy sigma=0.000891 ! Fit after self-cal, rms=0.065190Jy sigma=0.000891 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.678 mas, bmaj=5.735 mas, bpa=40.46 degrees ! Estimated noise=741.198 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.678 x 5.735 at 40.46 degrees (North through East) ! Clean map min=-0.0025168 max=0.53095 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065190Jy sigma=0.000891 ! Fit after self-cal, rms=0.058593Jy sigma=0.000749 ! Inverting map and beam ! Estimated beam: bmin=4.678 mas, bmaj=5.743 mas, bpa=40.47 degrees ! Estimated noise=741.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000764601 Jy ! Component: 100 - total flux cleaned = -0.00105475 Jy ! Component: 150 - total flux cleaned = -0.00127683 Jy ! Component: 200 - total flux cleaned = -0.00148251 Jy ! Total flux subtracted in 200 components = -0.00148251 Jy ! Clean residual min=-0.002485 max=0.002311 Jy/beam ! Clean residual mean=0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.559364 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.559364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058518Jy sigma=0.000748 ! Fit after self-cal, rms=0.058522Jy sigma=0.000748 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149647 Jy ! Component: 100 - total flux cleaned = -0.000330958 Jy ! Component: 150 - total flux cleaned = -0.000498942 Jy ! Component: 200 - total flux cleaned = -0.000626168 Jy ! Total flux subtracted in 200 components = -0.000626168 Jy ! Clean residual min=-0.002428 max=0.002256 Jy/beam ! Clean residual mean=0.000003 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.558738 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.558738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058476Jy sigma=0.000748 ! Fit after self-cal, rms=0.058479Jy sigma=0.000748 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058479Jy sigma=0.000748 ! Fit after self-cal, rms=0.058420Jy sigma=0.000747 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=4.231 mas, bpa=39.28 degrees ! Estimated noise=1095.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.417891 Jy ! Component: 100 - total flux cleaned = 0.509019 Jy ! Component: 150 - total flux cleaned = 0.530633 Jy ! Component: 200 - total flux cleaned = 0.53902 Jy ! Total flux subtracted in 200 components = 0.53902 Jy ! Clean residual min=-0.004284 max=0.005948 Jy/beam ! Clean residual mean=-0.000001 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.53902 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.53902 Jy ! Inverting map and beam ! Estimated beam: bmin=4.677 mas, bmaj=5.742 mas, bpa=40.5 degrees ! Estimated noise=741.112 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00624661 Jy ! Component: 100 - total flux cleaned = 0.0101331 Jy ! Component: 150 - total flux cleaned = 0.0119576 Jy ! Component: 200 - total flux cleaned = 0.0129516 Jy ! Total flux subtracted in 200 components = 0.0129516 Jy ! Clean residual min=-0.002300 max=0.002611 Jy/beam ! Clean residual mean=-0.000002 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.551972 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 49 components and 0.551972 Jy ! Inverting map ! Added new window around map position (46.5, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213977 Jy ! Component: 100 - total flux cleaned = 0.00297841 Jy ! Component: 150 - total flux cleaned = 0.0035265 Jy ! Component: 200 - total flux cleaned = 0.00391168 Jy ! Total flux subtracted in 200 components = 0.00391168 Jy ! Clean residual min=-0.001951 max=0.001968 Jy/beam ! Clean residual mean=0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.555884 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.555884 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.296 mas, bmaj=10.01 mas, bpa=57.13 degrees ! Estimated noise=836.586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910917 Jy ! Component: 100 - total flux cleaned = 0.00118016 Jy ! Component: 150 - total flux cleaned = 0.00124523 Jy ! Component: 200 - total flux cleaned = 0.00130061 Jy ! Total flux subtracted in 200 components = 0.00130061 Jy ! Clean residual min=-0.001855 max=0.001673 Jy/beam ! Clean residual mean=0.000004 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.557184 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.85608e-05 Jy ! Component: 100 - total flux cleaned = 7.91245e-05 Jy ! Component: 150 - total flux cleaned = 0.000121474 Jy ! Component: 200 - total flux cleaned = 0.00014795 Jy ! Total flux subtracted in 200 components = 0.00014795 Jy ! Clean residual min=-0.001830 max=0.001690 Jy/beam ! Clean residual mean=0.000004 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.557332 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 88 components and 0.557332 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.677 mas, bmaj=5.742 mas, bpa=40.5 degrees ! Estimated noise=741.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38486e-05 Jy ! Component: 100 - total flux cleaned = -0.000149816 Jy ! Component: 150 - total flux cleaned = -0.000175164 Jy ! Component: 200 - total flux cleaned = -0.000150568 Jy ! Total flux subtracted in 200 components = -0.000150568 Jy ! Clean residual min=-0.001767 max=0.001743 Jy/beam ! Clean residual mean=0.000002 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.557182 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 0.557182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058121Jy sigma=0.000744 ! Fit after self-cal, rms=0.058117Jy sigma=0.000744 wmodel J1419+3821_S_2014_01_04_pus_map.mod ! Writing 105 model components to file: J1419+3821_S_2014_01_04_pus_map.mod wobs J1419+3821_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1419+3821_S_2014_01_04_pus_uvs.fits wwins J1419+3821_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1419+3821_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029725 Jy ! Component: 100 - total flux cleaned = -0.000207712 Jy ! Component: 150 - total flux cleaned = -6.61089e-05 Jy ! Component: 200 - total flux cleaned = 0.000121306 Jy ! Component: 250 - total flux cleaned = 0.000250301 Jy ! Component: 300 - total flux cleaned = 0.00047222 Jy ! Component: 350 - total flux cleaned = 0.000663242 Jy ! Component: 400 - total flux cleaned = 0.000825737 Jy ! Component: 450 - total flux cleaned = 0.000960361 Jy ! Component: 500 - total flux cleaned = 0.000982101 Jy ! Component: 550 - total flux cleaned = 0.0010896 Jy ! Component: 600 - total flux cleaned = 0.00117398 Jy ! Component: 650 - total flux cleaned = 0.00129696 Jy ! Component: 700 - total flux cleaned = 0.00139779 Jy ! Component: 750 - total flux cleaned = 0.00151641 Jy ! Component: 800 - total flux cleaned = 0.00163254 Jy ! Component: 850 - total flux cleaned = 0.00176535 Jy ! Component: 900 - total flux cleaned = 0.00180248 Jy ! Component: 950 - total flux cleaned = 0.00193109 Jy ! Component: 1000 - total flux cleaned = 0.0020215 Jy ! Component: 1050 - total flux cleaned = 0.00209241 Jy ! Component: 1100 - total flux cleaned = 0.0021102 Jy ! Component: 1150 - total flux cleaned = 0.00219638 Jy ! Component: 1200 - total flux cleaned = 0.00229853 Jy ! Component: 1250 - total flux cleaned = 0.00239958 Jy ! Component: 1300 - total flux cleaned = 0.00249887 Jy ! Component: 1350 - total flux cleaned = 0.00261322 Jy ! Component: 1400 - total flux cleaned = 0.00267767 Jy ! Component: 1450 - total flux cleaned = 0.00275738 Jy ! Component: 1500 - total flux cleaned = 0.00280473 Jy ! Component: 1550 - total flux cleaned = 0.00286684 Jy ! Component: 1600 - total flux cleaned = 0.00294394 Jy ! Component: 1650 - total flux cleaned = 0.00301995 Jy ! Component: 1700 - total flux cleaned = 0.00309516 Jy ! Component: 1750 - total flux cleaned = 0.0031548 Jy ! Component: 1800 - total flux cleaned = 0.00319893 Jy ! Component: 1850 - total flux cleaned = 0.00327182 Jy ! Component: 1900 - total flux cleaned = 0.00332951 Jy ! Component: 1950 - total flux cleaned = 0.00338667 Jy ! Component: 2000 - total flux cleaned = 0.00344327 Jy ! Component: 2050 - total flux cleaned = 0.0034573 Jy ! Component: 2100 - total flux cleaned = 0.00347115 Jy ! Component: 2150 - total flux cleaned = 0.00352634 Jy ! Component: 2200 - total flux cleaned = 0.00352649 Jy ! Component: 2250 - total flux cleaned = 0.0035805 Jy ! Component: 2300 - total flux cleaned = 0.00359396 Jy ! Component: 2350 - total flux cleaned = 0.00364696 Jy ! Component: 2400 - total flux cleaned = 0.00366012 Jy ! Component: 2450 - total flux cleaned = 0.00366016 Jy ! Component: 2500 - total flux cleaned = 0.00368614 Jy ! Component: 2550 - total flux cleaned = 0.00375031 Jy ! Component: 2600 - total flux cleaned = 0.00378849 Jy ! Component: 2650 - total flux cleaned = 0.0038012 Jy ! Component: 2700 - total flux cleaned = 0.00382629 Jy ! Component: 2750 - total flux cleaned = 0.00385123 Jy ! Component: 2800 - total flux cleaned = 0.00391284 Jy ! Component: 2850 - total flux cleaned = 0.00391278 Jy ! Component: 2900 - total flux cleaned = 0.00394931 Jy ! Component: 2950 - total flux cleaned = 0.00396146 Jy ! Component: 3000 - total flux cleaned = 0.00405726 Jy ! Component: 3050 - total flux cleaned = 0.00408098 Jy ! Component: 3100 - total flux cleaned = 0.00411641 Jy ! Component: 3150 - total flux cleaned = 0.00412821 Jy ! Component: 3200 - total flux cleaned = 0.00418645 Jy ! Component: 3250 - total flux cleaned = 0.00420955 Jy ! Component: 3300 - total flux cleaned = 0.00423259 Jy ! Component: 3350 - total flux cleaned = 0.00427818 Jy ! Component: 3400 - total flux cleaned = 0.00426685 Jy ! Component: 3450 - total flux cleaned = 0.00430078 Jy ! Component: 3500 - total flux cleaned = 0.00437912 Jy ! Component: 3550 - total flux cleaned = 0.00439023 Jy ! Component: 3600 - total flux cleaned = 0.00446771 Jy ! Component: 3650 - total flux cleaned = 0.0045007 Jy ! Component: 3700 - total flux cleaned = 0.00453344 Jy ! Component: 3750 - total flux cleaned = 0.00458784 Jy ! Component: 3800 - total flux cleaned = 0.00462026 Jy ! Component: 3850 - total flux cleaned = 0.00468488 Jy ! Component: 3900 - total flux cleaned = 0.00470621 Jy ! Component: 3950 - total flux cleaned = 0.00475947 Jy ! Component: 4000 - total flux cleaned = 0.00483372 Jy ! Component: 4050 - total flux cleaned = 0.00486533 Jy ! Total flux subtracted in 4096 components = 0.00490738 Jy ! Clean residual min=-0.000650 max=0.000637 Jy/beam ! Clean residual mean=0.000004 rms=0.000180 Jy/beam ! Combined flux in latest and established models = 0.562089 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 349 components and 0.562089 Jy ![Exited script file: muppet] wmap "J1419+3821_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.677 x 5.742 at 40.5 degrees (North through East) ! Clean map min=-0.0016051 max=0.53618 Jy/beam ! Writing clean map to FITS file: J1419+3821_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.53618 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176564 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0987902 0.0987902 0.19758 0.395161 0.790322 1.58064 3.16129 6.32257 12.6451 25.2903 50.5806 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.536 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.677 x 5.742 at 40.5 degrees (North through East) ! Clean map min=-0.0016051 max=0.53618 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1419+3821_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:23 2017