! Started logfile: J1400-1858_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:26:51 2017 obs J1400-1858_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1400-1858_S_2015_01_23_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.872619 visibilities/baseline/integration-bin. ! Found source: J1400-1858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 8796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1400-1858_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 37 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.785629Jy sigma=0.007569 ! Fit after self-cal, rms=0.775226Jy sigma=0.007487 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.092 mas, bpa=-1.469 degrees ! Estimated noise=1074.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180572 Jy ! Component: 100 - total flux cleaned = 0.219949 Jy ! Total flux subtracted in 100 components = 0.219949 Jy ! Clean residual min=-0.010264 max=0.015382 Jy/beam ! Clean residual mean=-0.000000 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 0.219949 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.219949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156338Jy sigma=0.000951 ! Fit after self-cal, rms=0.156333Jy sigma=0.000951 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=7.23 mas, bpa=-3.323 degrees ! Estimated noise=829.259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132759 Jy ! Component: 100 - total flux cleaned = 0.0197002 Jy ! Component: 150 - total flux cleaned = 0.0231222 Jy ! Component: 200 - total flux cleaned = 0.0249683 Jy ! Total flux subtracted in 200 components = 0.0249683 Jy ! Clean residual min=-0.011291 max=0.015977 Jy/beam ! Clean residual mean=-0.000017 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 0.244917 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.244917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154404Jy sigma=0.000946 ! Fit after self-cal, rms=0.154425Jy sigma=0.000946 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.77 HN 1.02 KP 1.08 ! LA 0.96 MK 1.00 NL 1.28 OV 0.96 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.08 KP 1.00 ! LA 0.93 MK 1.01 NL 1.58 OV 1.00 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.17 HN 1.11 KP 0.88 ! LA 0.74 MK 1.02 NL 1.53 OV 0.92 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.03 KP 0.79 ! LA 0.78 MK 0.99 NL 1.01 OV 0.97 ! PT 1.01 SC 0.95 ! ! ! Fit before self-cal, rms=0.154425Jy sigma=0.000946 ! Fit after self-cal, rms=0.149200Jy sigma=0.000837 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=7.217 mas, bpa=-2.628 degrees ! Estimated noise=831.621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308847 Jy ! Component: 100 - total flux cleaned = -0.0004547 Jy ! Component: 150 - total flux cleaned = -0.000508598 Jy ! Component: 200 - total flux cleaned = -0.000586409 Jy ! Total flux subtracted in 200 components = -0.000586409 Jy ! Clean residual min=-0.007754 max=0.007258 Jy/beam ! Clean residual mean=-0.000007 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.244331 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.244331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149103Jy sigma=0.000837 ! Fit after self-cal, rms=0.149204Jy sigma=0.000836 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149204Jy sigma=0.000836 ! Fit after self-cal, rms=0.145917Jy sigma=0.000800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.211 mas, bpa=-2.697 degrees ! Estimated noise=833.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201826 Jy ! Component: 100 - total flux cleaned = 0.000202896 Jy ! Component: 150 - total flux cleaned = 0.000239568 Jy ! Component: 200 - total flux cleaned = 0.000238021 Jy ! Total flux subtracted in 200 components = 0.000238021 Jy ! Clean residual min=-0.002507 max=0.002956 Jy/beam ! Clean residual mean=-0.000005 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.244569 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.244569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145893Jy sigma=0.000800 ! Fit after self-cal, rms=0.145948Jy sigma=0.000800 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-91, 107). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291137 Jy ! Component: 100 - total flux cleaned = 0.0043674 Jy ! Component: 150 - total flux cleaned = 0.00497682 Jy ! Component: 200 - total flux cleaned = 0.00532012 Jy ! Total flux subtracted in 200 components = 0.00532012 Jy ! Clean residual min=-0.002451 max=0.002409 Jy/beam ! Clean residual mean=-0.000001 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.249889 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 59 components and 0.249889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145839Jy sigma=0.000799 ! Fit after self-cal, rms=0.145848Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145848Jy sigma=0.000799 ! Fit after self-cal, rms=0.146232Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.209 mas, bpa=-2.779 degrees ! Estimated noise=834.326 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000500863 Jy ! Component: 100 - total flux cleaned = 0.000685025 Jy ! Component: 150 - total flux cleaned = 0.000820369 Jy ! Component: 200 - total flux cleaned = 0.000944689 Jy ! Total flux subtracted in 200 components = 0.000944689 Jy ! Clean residual min=-0.002364 max=0.002440 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.250834 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.250834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146204Jy sigma=0.000799 ! Fit after self-cal, rms=0.146209Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220857 Jy ! Component: 100 - total flux cleaned = 0.000303438 Jy ! Component: 150 - total flux cleaned = 0.000355505 Jy ! Component: 200 - total flux cleaned = 0.000406053 Jy ! Total flux subtracted in 200 components = 0.000406053 Jy ! Clean residual min=-0.002360 max=0.002438 Jy/beam ! Clean residual mean=-0.000002 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.25124 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.25124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146193Jy sigma=0.000799 ! Fit after self-cal, rms=0.146194Jy sigma=0.000799 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146194Jy sigma=0.000799 ! Fit after self-cal, rms=0.146506Jy sigma=0.000799 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=14.79 mas, bpa=0.7017 degrees ! Estimated noise=1092.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716868 Jy ! Component: 100 - total flux cleaned = 0.000872506 Jy ! Component: 150 - total flux cleaned = 0.00100963 Jy ! Component: 200 - total flux cleaned = 0.00108322 Jy ! Total flux subtracted in 200 components = 0.00108322 Jy ! Clean residual min=-0.002840 max=0.003147 Jy/beam ! Clean residual mean=-0.000004 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 0.252323 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.252323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146493Jy sigma=0.000799 ! Fit after self-cal, rms=0.146494Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.86817e-05 Jy ! Component: 100 - total flux cleaned = 4.4938e-05 Jy ! Component: 150 - total flux cleaned = 9.71043e-05 Jy ! Component: 200 - total flux cleaned = 0.0001339 Jy ! Total flux subtracted in 200 components = 0.0001339 Jy ! Clean residual min=-0.002854 max=0.003156 Jy/beam ! Clean residual mean=-0.000004 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.252457 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.252457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146492Jy sigma=0.000799 ! Fit after self-cal, rms=0.146491Jy sigma=0.000799 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.207 mas, bpa=-2.86 degrees ! Estimated noise=835.745 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.207 at -2.86 degrees (North through East) ! Clean map min=-0.0023131 max=0.23173 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.557 mas, bmaj=6.088 mas, bpa=-0.8488 degrees ! Estimated noise=1075.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180567 Jy ! Component: 100 - total flux cleaned = 0.219964 Jy ! Component: 150 - total flux cleaned = 0.231104 Jy ! Component: 200 - total flux cleaned = 0.236403 Jy ! Total flux subtracted in 200 components = 0.236403 Jy ! Clean residual min=-0.003451 max=0.004190 Jy/beam ! Clean residual mean=-0.000001 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.236403 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.236403 Jy ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.207 mas, bpa=-2.86 degrees ! Estimated noise=835.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0046229 Jy ! Component: 100 - total flux cleaned = 0.00771824 Jy ! Component: 150 - total flux cleaned = 0.00991406 Jy ! Component: 200 - total flux cleaned = 0.0115588 Jy ! Total flux subtracted in 200 components = 0.0115588 Jy ! Clean residual min=-0.002215 max=0.002308 Jy/beam ! Clean residual mean=-0.000004 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.247962 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.247962 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=14.79 mas, bpa=0.7017 degrees ! Estimated noise=1092.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018653 Jy ! Component: 100 - total flux cleaned = 0.00297294 Jy ! Component: 150 - total flux cleaned = 0.00371594 Jy ! Component: 200 - total flux cleaned = 0.00408273 Jy ! Total flux subtracted in 200 components = 0.00408273 Jy ! Clean residual min=-0.002850 max=0.003038 Jy/beam ! Clean residual mean=-0.000004 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.252045 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.97475e-05 Jy ! Component: 100 - total flux cleaned = 0.000133164 Jy ! Component: 150 - total flux cleaned = 0.000191944 Jy ! Component: 200 - total flux cleaned = 0.000247004 Jy ! Total flux subtracted in 200 components = 0.000247004 Jy ! Clean residual min=-0.002861 max=0.003045 Jy/beam ! Clean residual mean=-0.000004 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.252292 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 58 components and 0.252292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.207 mas, bpa=-2.86 degrees ! Estimated noise=835.745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030657 Jy ! Component: 100 - total flux cleaned = 0.000307593 Jy ! Component: 150 - total flux cleaned = 0.000251744 Jy ! Component: 200 - total flux cleaned = 0.000225569 Jy ! Total flux subtracted in 200 components = 0.000225569 Jy ! Clean residual min=-0.002243 max=0.002399 Jy/beam ! Clean residual mean=-0.000002 rms=0.000608 Jy/beam ! Combined flux in latest and established models = 0.252517 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.252517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146473Jy sigma=0.000798 ! Fit after self-cal, rms=0.146471Jy sigma=0.000798 wmodel J1400-1858_S_2015_01_23_pus_map.mod ! Writing 74 model components to file: J1400-1858_S_2015_01_23_pus_map.mod wobs J1400-1858_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1400-1858_S_2015_01_23_pus_uvs.fits wwins J1400-1858_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1400-1858_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713963 Jy ! Component: 100 - total flux cleaned = 0.000793584 Jy ! Component: 150 - total flux cleaned = 0.000944337 Jy ! Component: 200 - total flux cleaned = 0.00101715 Jy ! Component: 250 - total flux cleaned = 0.00108782 Jy ! Component: 300 - total flux cleaned = 0.0011564 Jy ! Component: 350 - total flux cleaned = 0.00129017 Jy ! Component: 400 - total flux cleaned = 0.0012899 Jy ! Component: 450 - total flux cleaned = 0.00135362 Jy ! Component: 500 - total flux cleaned = 0.00132177 Jy ! Component: 550 - total flux cleaned = 0.00135351 Jy ! Component: 600 - total flux cleaned = 0.00147492 Jy ! Component: 650 - total flux cleaned = 0.00156388 Jy ! Component: 700 - total flux cleaned = 0.00162148 Jy ! Component: 750 - total flux cleaned = 0.00167839 Jy ! Component: 800 - total flux cleaned = 0.00176263 Jy ! Component: 850 - total flux cleaned = 0.00176232 Jy ! Component: 900 - total flux cleaned = 0.00187119 Jy ! Component: 950 - total flux cleaned = 0.00200518 Jy ! Component: 1000 - total flux cleaned = 0.00200457 Jy ! Component: 1050 - total flux cleaned = 0.00213537 Jy ! Component: 1100 - total flux cleaned = 0.00213482 Jy ! Component: 1150 - total flux cleaned = 0.00216062 Jy ! Component: 1200 - total flux cleaned = 0.00213578 Jy ! Component: 1250 - total flux cleaned = 0.00218533 Jy ! Component: 1300 - total flux cleaned = 0.00216062 Jy ! Component: 1350 - total flux cleaned = 0.00213605 Jy ! Component: 1400 - total flux cleaned = 0.00208794 Jy ! Component: 1450 - total flux cleaned = 0.0020883 Jy ! Component: 1500 - total flux cleaned = 0.00211108 Jy ! Component: 1550 - total flux cleaned = 0.00204117 Jy ! Component: 1600 - total flux cleaned = 0.00201837 Jy ! Component: 1650 - total flux cleaned = 0.00195014 Jy ! Component: 1700 - total flux cleaned = 0.00190544 Jy ! Component: 1750 - total flux cleaned = 0.00197233 Jy ! Component: 1800 - total flux cleaned = 0.00195009 Jy ! Component: 1850 - total flux cleaned = 0.00190629 Jy ! Component: 1900 - total flux cleaned = 0.00197152 Jy ! Component: 1950 - total flux cleaned = 0.0019715 Jy ! Component: 2000 - total flux cleaned = 0.00192873 Jy ! Component: 2050 - total flux cleaned = 0.00186552 Jy ! Component: 2100 - total flux cleaned = 0.00194942 Jy ! Component: 2150 - total flux cleaned = 0.00196998 Jy ! Component: 2200 - total flux cleaned = 0.00199068 Jy ! Component: 2250 - total flux cleaned = 0.00203178 Jy ! Component: 2300 - total flux cleaned = 0.00201128 Jy ! Component: 2350 - total flux cleaned = 0.00197089 Jy ! Component: 2400 - total flux cleaned = 0.00197116 Jy ! Component: 2450 - total flux cleaned = 0.00205081 Jy ! Component: 2500 - total flux cleaned = 0.00201145 Jy ! Component: 2550 - total flux cleaned = 0.00197218 Jy ! Component: 2600 - total flux cleaned = 0.00189429 Jy ! Component: 2650 - total flux cleaned = 0.00193328 Jy ! Component: 2700 - total flux cleaned = 0.00189498 Jy ! Component: 2750 - total flux cleaned = 0.00187609 Jy ! Component: 2800 - total flux cleaned = 0.00187608 Jy ! Component: 2850 - total flux cleaned = 0.00180102 Jy ! Component: 2900 - total flux cleaned = 0.00176378 Jy ! Component: 2950 - total flux cleaned = 0.00168942 Jy ! Component: 3000 - total flux cleaned = 0.00167098 Jy ! Component: 3050 - total flux cleaned = 0.00161606 Jy ! Component: 3100 - total flux cleaned = 0.00163438 Jy ! Component: 3150 - total flux cleaned = 0.00156199 Jy ! Component: 3200 - total flux cleaned = 0.00149012 Jy ! Component: 3250 - total flux cleaned = 0.00145452 Jy ! Component: 3300 - total flux cleaned = 0.0014544 Jy ! Component: 3350 - total flux cleaned = 0.0013661 Jy ! Component: 3400 - total flux cleaned = 0.00133111 Jy ! Component: 3450 - total flux cleaned = 0.00129608 Jy ! Component: 3500 - total flux cleaned = 0.00120931 Jy ! Component: 3550 - total flux cleaned = 0.0011404 Jy ! Component: 3600 - total flux cleaned = 0.00108905 Jy ! Component: 3650 - total flux cleaned = 0.00100394 Jy ! Component: 3700 - total flux cleaned = 0.000987084 Jy ! Component: 3750 - total flux cleaned = 0.000919858 Jy ! Component: 3800 - total flux cleaned = 0.000819214 Jy ! Component: 3850 - total flux cleaned = 0.000752572 Jy ! Component: 3900 - total flux cleaned = 0.000669707 Jy ! Component: 3950 - total flux cleaned = 0.000570862 Jy ! Component: 4000 - total flux cleaned = 0.00043998 Jy ! Component: 4050 - total flux cleaned = 0.000407426 Jy ! Total flux subtracted in 4096 components = 0.000391299 Jy ! Clean residual min=-0.000855 max=0.001065 Jy/beam ! Clean residual mean=-0.000005 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.252909 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 355 components and 0.252909 Jy ![Exited script file: muppet] wmap "J1400-1858_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.207 at -2.86 degrees (North through East) ! Clean map min=-0.0017288 max=0.23176 Jy/beam ! Writing clean map to FITS file: J1400-1858_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.231759 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000307177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.397624 0.397624 0.795249 1.5905 3.181 6.36199 12.724 25.448 50.8959 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.231 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.119 x 7.207 at -2.86 degrees (North through East) ! Clean map min=-0.0017288 max=0.23176 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1400-1858_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:26:56 2017