! Started logfile: J1400+6210_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:01:11 2016 obs J1400+6210_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1400+6210_S_2015_03_17_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975828 visibilities/baseline/integration-bin. ! Found source: J1400+6210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 20024 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1400+6210_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.924254Jy sigma=0.010421 ! Fit after self-cal, rms=0.839994Jy sigma=0.009480 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=3.682 mas, bpa=-67.95 degrees ! Estimated noise=717.307 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.340984 Jy ! Component: 100 - total flux cleaned = 0.520557 Jy ! Total flux subtracted in 100 components = 0.520557 Jy ! Clean residual min=-0.079760 max=0.186159 Jy/beam ! Clean residual mean=-0.000245 rms=0.026828 Jy/beam ! Combined flux in latest and established models = 0.520557 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.520557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.696881Jy sigma=0.007560 ! Fit after self-cal, rms=0.695419Jy sigma=0.007543 ! Inverting map ! Added new window around map position (-31.5, 19.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.184284 Jy ! Component: 100 - total flux cleaned = 0.305498 Jy ! Total flux subtracted in 100 components = 0.305498 Jy ! Clean residual min=-0.069825 max=0.148362 Jy/beam ! Clean residual mean=-0.000269 rms=0.022569 Jy/beam ! Combined flux in latest and established models = 0.826056 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 44 components and 0.826056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.610759Jy sigma=0.006541 ! Fit after self-cal, rms=0.600861Jy sigma=0.006431 ! Inverting map ! Added new window around map position (-15, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174157 Jy ! Component: 100 - total flux cleaned = 0.291132 Jy ! Total flux subtracted in 100 components = 0.291132 Jy ! Clean residual min=-0.058866 max=0.105759 Jy/beam ! Clean residual mean=-0.000216 rms=0.017695 Jy/beam ! Combined flux in latest and established models = 1.11719 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 1.11719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.510023Jy sigma=0.005374 ! Fit after self-cal, rms=0.504227Jy sigma=0.005312 ! Inverting map ! Added new window around map position (-6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.125533 Jy ! Component: 100 - total flux cleaned = 0.22272 Jy ! Total flux subtracted in 100 components = 0.22272 Jy ! Clean residual min=-0.047723 max=0.076858 Jy/beam ! Clean residual mean=-0.000168 rms=0.014362 Jy/beam ! Combined flux in latest and established models = 1.33991 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 1.33991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438875Jy sigma=0.004573 ! Fit after self-cal, rms=0.435928Jy sigma=0.004544 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=4.473 mas, bpa=-80.96 degrees ! Estimated noise=442.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.163247 Jy ! Component: 100 - total flux cleaned = 0.294387 Jy ! Component: 150 - total flux cleaned = 0.404209 Jy ! Component: 200 - total flux cleaned = 0.497566 Jy ! Total flux subtracted in 200 components = 0.497566 Jy ! Clean residual min=-0.053773 max=0.088365 Jy/beam ! Clean residual mean=-0.000437 rms=0.018424 Jy/beam ! Combined flux in latest and established models = 1.83747 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 144 components and 1.83747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312183Jy sigma=0.003200 ! Fit after self-cal, rms=0.309119Jy sigma=0.003169 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.79 HN 1.03 KP 0.93 ! LA 0.83 MK 1.31 NL 0.94 OV 0.88 ! PT 0.88 SC 1.06 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.82 HN 1.11 KP 0.90 ! LA 0.80 MK 1.36 NL 1.08 OV 0.93 ! PT 0.88 SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.84 HN 1.12 KP 0.81 ! LA 0.66 MK 1.40 NL 1.24 OV 0.87 ! PT 0.87 SC 1.14 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.88 HN 1.09 KP 0.80 ! LA 0.72 MK 1.42 NL 1.14 OV 0.92 ! PT 0.91 SC 1.10 ! ! ! Fit before self-cal, rms=0.309119Jy sigma=0.003169 ! Fit after self-cal, rms=0.159365Jy sigma=0.002022 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.284 mas, bmaj=4.893 mas, bpa=-86.84 degrees ! Estimated noise=422.912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159145 Jy ! Component: 100 - total flux cleaned = 0.0339102 Jy ! Component: 150 - total flux cleaned = 0.0494412 Jy ! Component: 200 - total flux cleaned = 0.0611766 Jy ! Total flux subtracted in 200 components = 0.0611766 Jy ! Clean residual min=-0.027524 max=0.042936 Jy/beam ! Clean residual mean=-0.000040 rms=0.008633 Jy/beam ! Combined flux in latest and established models = 1.89865 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 1.89865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139722Jy sigma=0.001753 ! Fit after self-cal, rms=0.136732Jy sigma=0.001709 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136732Jy sigma=0.001709 ! Fit after self-cal, rms=0.129905Jy sigma=0.001616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.259 mas, bmaj=4.882 mas, bpa=-85.11 degrees ! Estimated noise=419.993 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471517 Jy ! Component: 100 - total flux cleaned = 0.0114406 Jy ! Component: 150 - total flux cleaned = 0.0160678 Jy ! Component: 200 - total flux cleaned = 0.0201512 Jy ! Total flux subtracted in 200 components = 0.0201512 Jy ! Clean residual min=-0.021993 max=0.035694 Jy/beam ! Clean residual mean=-0.000321 rms=0.007192 Jy/beam ! Combined flux in latest and established models = 1.9188 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 172 components and 1.9188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124134Jy sigma=0.001533 ! Fit after self-cal, rms=0.123419Jy sigma=0.001523 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 30). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359846 Jy ! Component: 100 - total flux cleaned = 0.0576637 Jy ! Component: 150 - total flux cleaned = 0.073547 Jy ! Component: 200 - total flux cleaned = 0.0846938 Jy ! Total flux subtracted in 200 components = 0.0846938 Jy ! Clean residual min=-0.018109 max=0.034768 Jy/beam ! Clean residual mean=-0.000294 rms=0.005760 Jy/beam ! Combined flux in latest and established models = 2.00349 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 216 components and 2.00349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113028Jy sigma=0.001343 ! Fit after self-cal, rms=0.112371Jy sigma=0.001329 ! Inverting map ! Added new window around map position (3.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325244 Jy ! Component: 100 - total flux cleaned = 0.0438571 Jy ! Component: 150 - total flux cleaned = 0.0551777 Jy ! Component: 200 - total flux cleaned = 0.0656347 Jy ! Total flux subtracted in 200 components = 0.0656347 Jy ! Clean residual min=-0.015055 max=0.018554 Jy/beam ! Clean residual mean=-0.000274 rms=0.004530 Jy/beam ! Combined flux in latest and established models = 2.06913 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 244 components and 2.06913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102186Jy sigma=0.001175 ! Fit after self-cal, rms=0.101419Jy sigma=0.001166 ! Inverting map ! Added new window around map position (14, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173312 Jy ! Component: 100 - total flux cleaned = 0.0276593 Jy ! Component: 150 - total flux cleaned = 0.0343738 Jy ! Component: 200 - total flux cleaned = 0.0408322 Jy ! Total flux subtracted in 200 components = 0.0408322 Jy ! Clean residual min=-0.015034 max=0.017833 Jy/beam ! Clean residual mean=-0.000263 rms=0.004083 Jy/beam ! Combined flux in latest and established models = 2.10996 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 273 components and 2.10996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097440Jy sigma=0.001111 ! Fit after self-cal, rms=0.097201Jy sigma=0.001108 ! Inverting map ! Added new window around map position (0, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158719 Jy ! Component: 100 - total flux cleaned = 0.0256208 Jy ! Component: 150 - total flux cleaned = 0.0340298 Jy ! Component: 200 - total flux cleaned = 0.0415597 Jy ! Total flux subtracted in 200 components = 0.0415597 Jy ! Clean residual min=-0.014182 max=0.013939 Jy/beam ! Clean residual mean=-0.000206 rms=0.003657 Jy/beam ! Combined flux in latest and established models = 2.15152 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 306 components and 2.15152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093818Jy sigma=0.001063 ! Fit after self-cal, rms=0.093745Jy sigma=0.001061 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093745Jy sigma=0.001061 ! Fit after self-cal, rms=0.089116Jy sigma=0.001023 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=4.873 mas, bpa=-83.39 degrees ! Estimated noise=415.621 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898203 Jy ! Component: 100 - total flux cleaned = 0.0151644 Jy ! Component: 150 - total flux cleaned = 0.0206845 Jy ! Component: 200 - total flux cleaned = 0.0259897 Jy ! Total flux subtracted in 200 components = 0.0259897 Jy ! Clean residual min=-0.011135 max=0.011645 Jy/beam ! Clean residual mean=-0.000077 rms=0.002906 Jy/beam ! Combined flux in latest and established models = 2.17751 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 336 components and 2.17751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087161Jy sigma=0.000991 ! Fit after self-cal, rms=0.087108Jy sigma=0.000991 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00596403 Jy ! Component: 100 - total flux cleaned = 0.0103586 Jy ! Component: 150 - total flux cleaned = 0.014455 Jy ! Component: 200 - total flux cleaned = 0.0183061 Jy ! Total flux subtracted in 200 components = 0.0183061 Jy ! Clean residual min=-0.011157 max=0.010531 Jy/beam ! Clean residual mean=-0.000067 rms=0.002753 Jy/beam ! Combined flux in latest and established models = 2.19582 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 348 components and 2.19582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086093Jy sigma=0.000975 ! Fit after self-cal, rms=0.086080Jy sigma=0.000975 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086080Jy sigma=0.000975 ! Fit after self-cal, rms=0.084938Jy sigma=0.000971 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.254 mas, bmaj=9.463 mas, bpa=79.29 degrees ! Estimated noise=479.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110214 Jy ! Component: 100 - total flux cleaned = 0.0193863 Jy ! Component: 150 - total flux cleaned = 0.024752 Jy ! Component: 200 - total flux cleaned = 0.0281785 Jy ! Total flux subtracted in 200 components = 0.0281785 Jy ! Clean residual min=-0.012938 max=0.013057 Jy/beam ! Clean residual mean=-0.000088 rms=0.003586 Jy/beam ! Combined flux in latest and established models = 2.224 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 388 components and 2.224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084302Jy sigma=0.000957 ! Fit after self-cal, rms=0.084238Jy sigma=0.000956 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225328 Jy ! Component: 100 - total flux cleaned = 0.004168 Jy ! Component: 150 - total flux cleaned = 0.00553222 Jy ! Component: 200 - total flux cleaned = 0.00662302 Jy ! Total flux subtracted in 200 components = 0.00662302 Jy ! Clean residual min=-0.012117 max=0.011760 Jy/beam ! Clean residual mean=-0.000077 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 2.23062 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 418 components and 2.23062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084106Jy sigma=0.000952 ! Fit after self-cal, rms=0.084078Jy sigma=0.000952 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=4.874 mas, bpa=-83.94 degrees ! Estimated noise=414.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.246 x 4.874 at -83.94 degrees (North through East) ! Clean map min=-0.010935 max=0.38952 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.336 mas, bmaj=3.923 mas, bpa=-70.56 degrees ! Estimated noise=717.503 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.343921 Jy ! Component: 100 - total flux cleaned = 0.574202 Jy ! Component: 150 - total flux cleaned = 0.755956 Jy ! Component: 200 - total flux cleaned = 0.904575 Jy ! Total flux subtracted in 200 components = 0.904575 Jy ! Clean residual min=-0.054116 max=0.089703 Jy/beam ! Clean residual mean=-0.000112 rms=0.017467 Jy/beam ! Combined flux in latest and established models = 0.904575 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.904575 Jy ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=4.874 mas, bpa=-83.94 degrees ! Estimated noise=414.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197459 Jy ! Component: 100 - total flux cleaned = 0.347108 Jy ! Component: 150 - total flux cleaned = 0.466821 Jy ! Component: 200 - total flux cleaned = 0.564071 Jy ! Total flux subtracted in 200 components = 0.564071 Jy ! Clean residual min=-0.041454 max=0.062424 Jy/beam ! Clean residual mean=-0.000353 rms=0.014717 Jy/beam ! Combined flux in latest and established models = 1.46865 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 102 components and 1.46865 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.254 mas, bmaj=9.463 mas, bpa=79.29 degrees ! Estimated noise=479.853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131832 Jy ! Component: 100 - total flux cleaned = 0.228255 Jy ! Component: 150 - total flux cleaned = 0.304495 Jy ! Component: 200 - total flux cleaned = 0.36688 Jy ! Total flux subtracted in 200 components = 0.36688 Jy ! Clean residual min=-0.031891 max=0.038820 Jy/beam ! Clean residual mean=-0.000441 rms=0.013066 Jy/beam ! Combined flux in latest and established models = 1.83553 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523538 Jy ! Component: 100 - total flux cleaned = 0.096736 Jy ! Component: 150 - total flux cleaned = 0.134617 Jy ! Component: 200 - total flux cleaned = 0.167185 Jy ! Total flux subtracted in 200 components = 0.167185 Jy ! Clean residual min=-0.022106 max=0.023174 Jy/beam ! Clean residual mean=-0.000293 rms=0.007783 Jy/beam ! Combined flux in latest and established models = 2.00271 Jy ! Adding 153 model components to the UV plane model. ! The established model now contains 234 components and 2.00271 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.246 mas, bmaj=4.874 mas, bpa=-83.94 degrees ! Estimated noise=414.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291561 Jy ! Component: 100 - total flux cleaned = 0.0527197 Jy ! Component: 150 - total flux cleaned = 0.0731103 Jy ! Component: 200 - total flux cleaned = 0.0912919 Jy ! Total flux subtracted in 200 components = 0.0912919 Jy ! Clean residual min=-0.017315 max=0.022948 Jy/beam ! Clean residual mean=-0.000111 rms=0.004111 Jy/beam ! Combined flux in latest and established models = 2.094 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 260 components and 2.094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105213Jy sigma=0.001200 ! Fit after self-cal, rms=0.104804Jy sigma=0.001194 wmodel J1400+6210_S_2015_03_17_pus_map.mod ! Writing 260 model components to file: J1400+6210_S_2015_03_17_pus_map.mod wobs J1400+6210_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1400+6210_S_2015_03_17_pus_uvs.fits wwins J1400+6210_S_2015_03_17_pus_map.win ! wwins: Wrote 8 windows to J1400+6210_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00944971 Jy ! Component: 100 - total flux cleaned = 0.0156015 Jy ! Component: 150 - total flux cleaned = 0.0193232 Jy ! Component: 200 - total flux cleaned = 0.0212142 Jy ! Component: 250 - total flux cleaned = 0.0217263 Jy ! Component: 300 - total flux cleaned = 0.0214839 Jy ! Component: 350 - total flux cleaned = 0.0224273 Jy ! Component: 400 - total flux cleaned = 0.0226511 Jy ! Component: 450 - total flux cleaned = 0.0235333 Jy ! Component: 500 - total flux cleaned = 0.0239596 Jy ! Component: 550 - total flux cleaned = 0.0237506 Jy ! Component: 600 - total flux cleaned = 0.0239604 Jy ! Component: 650 - total flux cleaned = 0.0241614 Jy ! Component: 700 - total flux cleaned = 0.0249381 Jy ! Component: 750 - total flux cleaned = 0.0253121 Jy ! Component: 800 - total flux cleaned = 0.0262377 Jy ! Component: 850 - total flux cleaned = 0.0273215 Jy ! Component: 900 - total flux cleaned = 0.0278532 Jy ! Component: 950 - total flux cleaned = 0.0288922 Jy ! Component: 1000 - total flux cleaned = 0.029569 Jy ! Component: 1050 - total flux cleaned = 0.0300649 Jy ! Component: 1100 - total flux cleaned = 0.0303888 Jy ! Component: 1150 - total flux cleaned = 0.0308717 Jy ! Component: 1200 - total flux cleaned = 0.0314977 Jy ! Component: 1250 - total flux cleaned = 0.031808 Jy ! Component: 1300 - total flux cleaned = 0.0324205 Jy ! Component: 1350 - total flux cleaned = 0.0331627 Jy ! Component: 1400 - total flux cleaned = 0.0335991 Jy ! Component: 1450 - total flux cleaned = 0.0340319 Jy ! Component: 1500 - total flux cleaned = 0.0348758 Jy ! Component: 1550 - total flux cleaned = 0.0350142 Jy ! Component: 1600 - total flux cleaned = 0.0352922 Jy ! Component: 1650 - total flux cleaned = 0.0359665 Jy ! Component: 1700 - total flux cleaned = 0.0364915 Jy ! Component: 1750 - total flux cleaned = 0.0366223 Jy ! Component: 1800 - total flux cleaned = 0.0367514 Jy ! Component: 1850 - total flux cleaned = 0.0365033 Jy ! Component: 1900 - total flux cleaned = 0.0367534 Jy ! Component: 1950 - total flux cleaned = 0.0367562 Jy ! Component: 2000 - total flux cleaned = 0.0367603 Jy ! Component: 2050 - total flux cleaned = 0.0374644 Jy ! Component: 2100 - total flux cleaned = 0.0372316 Jy ! Component: 2150 - total flux cleaned = 0.0372337 Jy ! Component: 2200 - total flux cleaned = 0.0375691 Jy ! Component: 2250 - total flux cleaned = 0.0371282 Jy ! Component: 2300 - total flux cleaned = 0.0375658 Jy ! Component: 2350 - total flux cleaned = 0.0374608 Jy ! Component: 2400 - total flux cleaned = 0.037565 Jy ! Component: 2450 - total flux cleaned = 0.0371458 Jy ! Component: 2500 - total flux cleaned = 0.0373531 Jy ! Component: 2550 - total flux cleaned = 0.0372503 Jy ! Component: 2600 - total flux cleaned = 0.0375509 Jy ! Component: 2650 - total flux cleaned = 0.0371543 Jy ! Component: 2700 - total flux cleaned = 0.037154 Jy ! Component: 2750 - total flux cleaned = 0.0369635 Jy ! Component: 2800 - total flux cleaned = 0.037251 Jy ! Component: 2850 - total flux cleaned = 0.0370647 Jy ! Component: 2900 - total flux cleaned = 0.0370674 Jy ! Component: 2950 - total flux cleaned = 0.0369758 Jy ! Component: 3000 - total flux cleaned = 0.0367973 Jy ! Component: 3050 - total flux cleaned = 0.0367091 Jy ! Component: 3100 - total flux cleaned = 0.0367077 Jy ! Component: 3150 - total flux cleaned = 0.0361048 Jy ! Component: 3200 - total flux cleaned = 0.0361897 Jy ! Component: 3250 - total flux cleaned = 0.0358528 Jy ! Component: 3300 - total flux cleaned = 0.0356048 Jy ! Component: 3350 - total flux cleaned = 0.0357711 Jy ! Component: 3400 - total flux cleaned = 0.0356884 Jy ! Component: 3450 - total flux cleaned = 0.0358485 Jy ! Component: 3500 - total flux cleaned = 0.035848 Jy ! Component: 3550 - total flux cleaned = 0.035614 Jy ! Component: 3600 - total flux cleaned = 0.0353829 Jy ! Component: 3650 - total flux cleaned = 0.0355368 Jy ! Component: 3700 - total flux cleaned = 0.0356121 Jy ! Component: 3750 - total flux cleaned = 0.0356131 Jy ! Component: 3800 - total flux cleaned = 0.0353933 Jy ! Component: 3850 - total flux cleaned = 0.0352476 Jy ! Component: 3900 - total flux cleaned = 0.0351056 Jy ! Component: 3950 - total flux cleaned = 0.0353901 Jy ! Component: 4000 - total flux cleaned = 0.0352493 Jy ! Component: 4050 - total flux cleaned = 0.0349729 Jy ! Total flux subtracted in 4096 components = 0.0351097 Jy ! Clean residual min=-0.004258 max=0.003909 Jy/beam ! Clean residual mean=-0.000034 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 2.12911 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 519 components and 2.12911 Jy ![Exited script file: muppet] wmap "J1400+6210_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.246 x 4.874 at -83.94 degrees (North through East) ! Clean map min=-0.010758 max=0.40185 Jy/beam ! Writing clean map to FITS file: J1400+6210_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.401855 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00122156 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.911942 0.911942 1.82388 3.64777 7.29554 14.5911 29.1821 58.3643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.401 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.246 x 4.874 at -83.94 degrees (North through East) ! Clean map min=-0.010758 max=0.40185 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1400+6210_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:01:17 2016