! Started logfile: J1358+1119_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:29:13 2017 obs J1358+1119_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1358+1119_S_2014_01_04_pus_uva.fits ! AN table 1: 98 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1358+1119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 8428 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1358+1119_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.882894Jy sigma=0.011722 ! Fit after self-cal, rms=0.868761Jy sigma=0.011498 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.722 mas, bmaj=5.376 mas, bpa=4.136 degrees ! Estimated noise=931.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991035 Jy ! Component: 100 - total flux cleaned = 0.123709 Jy ! Total flux subtracted in 100 components = 0.123709 Jy ! Clean residual min=-0.006663 max=0.009316 Jy/beam ! Clean residual mean=-0.000089 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.123709 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.123709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076864Jy sigma=0.000904 ! Fit after self-cal, rms=0.076853Jy sigma=0.000904 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=6.267 mas, bpa=-3.411 degrees ! Estimated noise=615.718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136163 Jy ! Component: 100 - total flux cleaned = 0.0203746 Jy ! Component: 150 - total flux cleaned = 0.0248565 Jy ! Component: 200 - total flux cleaned = 0.0278652 Jy ! Total flux subtracted in 200 components = 0.0278652 Jy ! Clean residual min=-0.004276 max=0.005612 Jy/beam ! Clean residual mean=-0.000077 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.151574 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.151574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074088Jy sigma=0.000875 ! Fit after self-cal, rms=0.074120Jy sigma=0.000875 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.81 KP 1.00* LA 1.05 ! MK 1.01 NL 0.98 OV 0.95 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.01 KP 1.00* LA 0.98 ! MK 1.01 NL 1.05 OV 0.98 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.21 KP 1.00* LA 0.79 ! MK 1.04 NL 1.00 OV 0.92 PT 0.96 ! SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 KP 1.00* LA 0.91 ! MK 1.03 NL 1.10 OV 0.98 PT 1.00 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.074120Jy sigma=0.000875 ! Fit after self-cal, rms=0.071662Jy sigma=0.000854 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.486 mas, bmaj=6.365 mas, bpa=-2.998 degrees ! Estimated noise=617.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185757 Jy ! Component: 100 - total flux cleaned = 0.00252658 Jy ! Component: 150 - total flux cleaned = 0.00263855 Jy ! Component: 200 - total flux cleaned = 0.00268123 Jy ! Total flux subtracted in 200 components = 0.00268123 Jy ! Clean residual min=-0.002361 max=0.002144 Jy/beam ! Clean residual mean=-0.000015 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.154255 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.154255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071466Jy sigma=0.000851 ! Fit after self-cal, rms=0.071242Jy sigma=0.000851 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071242Jy sigma=0.000851 ! Fit after self-cal, rms=0.071927Jy sigma=0.000849 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.484 mas, bmaj=6.335 mas, bpa=-3.52 degrees ! Estimated noise=618.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.2356e-05 Jy ! Component: 100 - total flux cleaned = 0.000201579 Jy ! Component: 150 - total flux cleaned = 0.000346558 Jy ! Component: 200 - total flux cleaned = 0.000493585 Jy ! Total flux subtracted in 200 components = 0.000493585 Jy ! Clean residual min=-0.001766 max=0.001990 Jy/beam ! Clean residual mean=-0.000020 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.154749 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 71 components and 0.154749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071897Jy sigma=0.000848 ! Fit after self-cal, rms=0.071906Jy sigma=0.000848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162994 Jy ! Component: 100 - total flux cleaned = 0.00172841 Jy ! Component: 150 - total flux cleaned = 0.00186862 Jy ! Component: 200 - total flux cleaned = 0.0019922 Jy ! Total flux subtracted in 200 components = 0.0019922 Jy ! Clean residual min=-0.001689 max=0.001494 Jy/beam ! Clean residual mean=-0.000017 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.156741 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.156741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071857Jy sigma=0.000848 ! Fit after self-cal, rms=0.071847Jy sigma=0.000848 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071847Jy sigma=0.000848 ! Fit after self-cal, rms=0.071823Jy sigma=0.000848 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.483 mas, bmaj=6.334 mas, bpa=-3.626 degrees ! Estimated noise=617.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293771 Jy ! Component: 100 - total flux cleaned = 0.000386199 Jy ! Component: 150 - total flux cleaned = 0.000492551 Jy ! Component: 200 - total flux cleaned = 0.000571241 Jy ! Total flux subtracted in 200 components = 0.000571241 Jy ! Clean residual min=-0.001573 max=0.001374 Jy/beam ! Clean residual mean=-0.000014 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.157312 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.157312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071807Jy sigma=0.000848 ! Fit after self-cal, rms=0.071807Jy sigma=0.000848 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.84348e-05 Jy ! Component: 100 - total flux cleaned = 0.000184243 Jy ! Component: 150 - total flux cleaned = 0.000298497 Jy ! Component: 200 - total flux cleaned = 0.000314006 Jy ! Total flux subtracted in 200 components = 0.000314006 Jy ! Clean residual min=-0.001523 max=0.001344 Jy/beam ! Clean residual mean=-0.000013 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.157626 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 123 components and 0.157626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071797Jy sigma=0.000847 ! Fit after self-cal, rms=0.071798Jy sigma=0.000847 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071798Jy sigma=0.000847 ! Fit after self-cal, rms=0.071802Jy sigma=0.000847 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=10.32 mas, bpa=-8.859 degrees ! Estimated noise=706.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024183 Jy ! Component: 100 - total flux cleaned = 0.000496116 Jy ! Component: 150 - total flux cleaned = 0.000635123 Jy ! Component: 200 - total flux cleaned = 0.000717041 Jy ! Total flux subtracted in 200 components = 0.000717041 Jy ! Clean residual min=-0.001421 max=0.001343 Jy/beam ! Clean residual mean=-0.000019 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.158343 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.158343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071798Jy sigma=0.000847 ! Fit after self-cal, rms=0.071797Jy sigma=0.000847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.17883e-05 Jy ! Component: 100 - total flux cleaned = 0.000113268 Jy ! Component: 150 - total flux cleaned = 0.000188252 Jy ! Component: 200 - total flux cleaned = 0.000247407 Jy ! Total flux subtracted in 200 components = 0.000247407 Jy ! Clean residual min=-0.001375 max=0.001360 Jy/beam ! Clean residual mean=-0.000019 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.158591 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 147 components and 0.158591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071796Jy sigma=0.000847 ! Fit after self-cal, rms=0.071797Jy sigma=0.000847 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.482 mas, bmaj=6.334 mas, bpa=-3.64 degrees ! Estimated noise=617.474 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.482 x 6.334 at -3.64 degrees (North through East) ! Clean map min=-0.0013927 max=0.13008 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.725 mas, bmaj=5.405 mas, bpa=3.667 degrees ! Estimated noise=950.714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101097 Jy ! Component: 100 - total flux cleaned = 0.126239 Jy ! Component: 150 - total flux cleaned = 0.136273 Jy ! Component: 200 - total flux cleaned = 0.141867 Jy ! Total flux subtracted in 200 components = 0.141867 Jy ! Clean residual min=-0.003608 max=0.003136 Jy/beam ! Clean residual mean=-0.000033 rms=0.000889 Jy/beam ! Combined flux in latest and established models = 0.141867 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.141867 Jy ! Inverting map and beam ! Estimated beam: bmin=4.482 mas, bmaj=6.334 mas, bpa=-3.64 degrees ! Estimated noise=617.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040365 Jy ! Component: 100 - total flux cleaned = 0.00638106 Jy ! Component: 150 - total flux cleaned = 0.00813342 Jy ! Component: 200 - total flux cleaned = 0.00952316 Jy ! Total flux subtracted in 200 components = 0.00952316 Jy ! Clean residual min=-0.001930 max=0.001581 Jy/beam ! Clean residual mean=-0.000033 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.15139 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 49 components and 0.15139 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.73 mas, bmaj=10.32 mas, bpa=-8.859 degrees ! Estimated noise=706.128 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153398 Jy ! Component: 100 - total flux cleaned = 0.00262329 Jy ! Component: 150 - total flux cleaned = 0.00346116 Jy ! Component: 200 - total flux cleaned = 0.00387285 Jy ! Total flux subtracted in 200 components = 0.00387285 Jy ! Clean residual min=-0.001586 max=0.001618 Jy/beam ! Clean residual mean=-0.000039 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.155263 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00038419 Jy ! Component: 100 - total flux cleaned = 0.000678864 Jy ! Component: 150 - total flux cleaned = 0.000961866 Jy ! Component: 200 - total flux cleaned = 0.00118107 Jy ! Total flux subtracted in 200 components = 0.00118107 Jy ! Clean residual min=-0.001450 max=0.001534 Jy/beam ! Clean residual mean=-0.000034 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.156444 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 91 components and 0.156444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.482 mas, bmaj=6.334 mas, bpa=-3.64 degrees ! Estimated noise=617.474 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145237 Jy ! Component: 100 - total flux cleaned = 0.000112997 Jy ! Component: 150 - total flux cleaned = 0.00016181 Jy ! Component: 200 - total flux cleaned = 0.000250528 Jy ! Total flux subtracted in 200 components = 0.000250528 Jy ! Clean residual min=-0.001604 max=0.001379 Jy/beam ! Clean residual mean=-0.000018 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.156695 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.156695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071810Jy sigma=0.000848 ! Fit after self-cal, rms=0.071802Jy sigma=0.000848 wmodel J1358+1119_S_2014_01_04_pus_map.mod ! Writing 112 model components to file: J1358+1119_S_2014_01_04_pus_map.mod wobs J1358+1119_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1358+1119_S_2014_01_04_pus_uvs.fits wwins J1358+1119_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1358+1119_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000485619 Jy ! Component: 100 - total flux cleaned = -0.000761223 Jy ! Component: 150 - total flux cleaned = -0.000949319 Jy ! Component: 200 - total flux cleaned = -0.00112568 Jy ! Component: 250 - total flux cleaned = -0.00125265 Jy ! Component: 300 - total flux cleaned = -0.0013337 Jy ! Component: 350 - total flux cleaned = -0.00143031 Jy ! Component: 400 - total flux cleaned = -0.00157956 Jy ! Component: 450 - total flux cleaned = -0.00174335 Jy ! Component: 500 - total flux cleaned = -0.00190279 Jy ! Component: 550 - total flux cleaned = -0.00200612 Jy ! Component: 600 - total flux cleaned = -0.00214062 Jy ! Component: 650 - total flux cleaned = -0.00223909 Jy ! Component: 700 - total flux cleaned = -0.00238298 Jy ! Component: 750 - total flux cleaned = -0.00257039 Jy ! Component: 800 - total flux cleaned = -0.00264696 Jy ! Component: 850 - total flux cleaned = -0.00273709 Jy ! Component: 900 - total flux cleaned = -0.0028408 Jy ! Component: 950 - total flux cleaned = -0.00295719 Jy ! Component: 1000 - total flux cleaned = -0.0030572 Jy ! Component: 1050 - total flux cleaned = -0.00316994 Jy ! Component: 1100 - total flux cleaned = -0.00330895 Jy ! Component: 1150 - total flux cleaned = -0.00337729 Jy ! Component: 1200 - total flux cleaned = -0.00347196 Jy ! Component: 1250 - total flux cleaned = -0.00356547 Jy ! Component: 1300 - total flux cleaned = -0.00367077 Jy ! Component: 1350 - total flux cleaned = -0.00374842 Jy ! Component: 1400 - total flux cleaned = -0.00386357 Jy ! Component: 1450 - total flux cleaned = -0.00391405 Jy ! Component: 1500 - total flux cleaned = -0.00401372 Jy ! Component: 1550 - total flux cleaned = -0.00409978 Jy ! Component: 1600 - total flux cleaned = -0.00416036 Jy ! Component: 1650 - total flux cleaned = -0.00418467 Jy ! Component: 1700 - total flux cleaned = -0.00426795 Jy ! Component: 1750 - total flux cleaned = -0.00432668 Jy ! Component: 1800 - total flux cleaned = -0.00438473 Jy ! Component: 1850 - total flux cleaned = -0.00444211 Jy ! Component: 1900 - total flux cleaned = -0.00448748 Jy ! Component: 1950 - total flux cleaned = -0.00454351 Jy ! Component: 2000 - total flux cleaned = -0.00457669 Jy ! Component: 2050 - total flux cleaned = -0.00459867 Jy ! Component: 2100 - total flux cleaned = -0.00462059 Jy ! Component: 2150 - total flux cleaned = -0.0046745 Jy ! Component: 2200 - total flux cleaned = -0.00473842 Jy ! Component: 2250 - total flux cleaned = -0.00479122 Jy ! Component: 2300 - total flux cleaned = -0.004833 Jy ! Component: 2350 - total flux cleaned = -0.0048641 Jy ! Component: 2400 - total flux cleaned = -0.00490528 Jy ! Component: 2450 - total flux cleaned = -0.0049765 Jy ! Component: 2500 - total flux cleaned = -0.00500675 Jy ! Component: 2550 - total flux cleaned = -0.00504678 Jy ! Component: 2600 - total flux cleaned = -0.0050865 Jy ! Component: 2650 - total flux cleaned = -0.00510628 Jy ! Component: 2700 - total flux cleaned = -0.00516495 Jy ! Component: 2750 - total flux cleaned = -0.00517462 Jy ! Component: 2800 - total flux cleaned = -0.00524205 Jy ! Component: 2850 - total flux cleaned = -0.00529944 Jy ! Component: 2900 - total flux cleaned = -0.00534678 Jy ! Component: 2950 - total flux cleaned = -0.00536556 Jy ! Component: 3000 - total flux cleaned = -0.00539369 Jy ! Component: 3050 - total flux cleaned = -0.00544956 Jy ! Component: 3100 - total flux cleaned = -0.00547718 Jy ! Component: 3150 - total flux cleaned = -0.00551393 Jy ! Component: 3200 - total flux cleaned = -0.00553215 Jy ! Component: 3250 - total flux cleaned = -0.0055775 Jy ! Component: 3300 - total flux cleaned = -0.00561354 Jy ! Component: 3350 - total flux cleaned = -0.00564931 Jy ! Component: 3400 - total flux cleaned = -0.00564046 Jy ! Component: 3450 - total flux cleaned = -0.00565816 Jy ! Component: 3500 - total flux cleaned = -0.00566698 Jy ! Component: 3550 - total flux cleaned = -0.00566696 Jy ! Component: 3600 - total flux cleaned = -0.0056582 Jy ! Component: 3650 - total flux cleaned = -0.00567557 Jy ! Component: 3700 - total flux cleaned = -0.00570149 Jy ! Component: 3750 - total flux cleaned = -0.00571874 Jy ! Component: 3800 - total flux cleaned = -0.00571018 Jy ! Component: 3850 - total flux cleaned = -0.00570171 Jy ! Component: 3900 - total flux cleaned = -0.00571025 Jy ! Component: 3950 - total flux cleaned = -0.0057272 Jy ! Component: 4000 - total flux cleaned = -0.00573558 Jy ! Component: 4050 - total flux cleaned = -0.00572715 Jy ! Total flux subtracted in 4096 components = -0.00575227 Jy ! Clean residual min=-0.000444 max=0.000447 Jy/beam ! Clean residual mean=-0.000005 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.150942 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 372 components and 0.150942 Jy ![Exited script file: muppet] wmap "J1358+1119_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.482 x 6.334 at -3.64 degrees (North through East) ! Clean map min=-0.001456 max=0.13234 Jy/beam ! Writing clean map to FITS file: J1358+1119_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.132343 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145139 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.329007 0.329007 0.658014 1.31603 2.63206 5.26412 10.5282 21.0565 42.1129 84.2258 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.132 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.482 x 6.334 at -3.64 degrees (North through East) ! Clean map min=-0.001456 max=0.13234 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1358+1119_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:18 2017