! Started logfile: J1357-1527_S_2015_03_17_pus_uvs.log on Fri Dec 30 23:01:07 2016 obs J1357-1527_S_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1357-1527_S_2015_03_17_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J1357-1527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 330 lines of history. ! ! Reading 1848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1357-1527_S_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.611420Jy sigma=0.005670 ! Fit after self-cal, rms=0.604601Jy sigma=0.005606 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=9.657 mas, bpa=5.018 degrees ! Estimated noise=2403.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.30161 Jy ! Component: 100 - total flux cleaned = 0.370702 Jy ! Total flux subtracted in 100 components = 0.370702 Jy ! Clean residual min=-0.021444 max=0.027207 Jy/beam ! Clean residual mean=-0.000334 rms=0.006487 Jy/beam ! Combined flux in latest and established models = 0.370702 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.370702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123598Jy sigma=0.001025 ! Fit after self-cal, rms=0.123589Jy sigma=0.001025 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.226 mas, bmaj=11.05 mas, bpa=4.235 degrees ! Estimated noise=1826.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0406926 Jy ! Component: 100 - total flux cleaned = 0.0625114 Jy ! Component: 150 - total flux cleaned = 0.0755044 Jy ! Component: 200 - total flux cleaned = 0.0838198 Jy ! Total flux subtracted in 200 components = 0.0838198 Jy ! Clean residual min=-0.019445 max=0.016934 Jy/beam ! Clean residual mean=-0.000196 rms=0.004269 Jy/beam ! Combined flux in latest and established models = 0.454522 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 68 components and 0.454522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106871Jy sigma=0.000910 ! Fit after self-cal, rms=0.106668Jy sigma=0.000909 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.84 HN 0.99 KP 1.09 ! LA 0.99 MK 1.00* NL 0.89 OV 1.02 ! PT 1.16 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.89 HN 1.06 KP 1.06 ! LA 0.93 MK 1.00* NL 1.02 OV 1.06 ! PT 1.13 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.89 HN 1.01 KP 0.96 ! LA 0.78 MK 1.00* NL 1.10 OV 0.97 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.91 HN 1.00 KP 0.90 ! LA 0.84 MK 1.00* NL 1.03 OV 1.01 ! PT 1.14 SC 0.95 ! ! ! Fit before self-cal, rms=0.106668Jy sigma=0.000909 ! Fit after self-cal, rms=0.088779Jy sigma=0.000787 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=11.12 mas, bpa=4.148 degrees ! Estimated noise=1812.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129656 Jy ! Component: 100 - total flux cleaned = 0.00117454 Jy ! Component: 150 - total flux cleaned = 0.00107313 Jy ! Component: 200 - total flux cleaned = 0.0011202 Jy ! Total flux subtracted in 200 components = 0.0011202 Jy ! Clean residual min=-0.005033 max=0.005323 Jy/beam ! Clean residual mean=0.000017 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.455642 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.455642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088692Jy sigma=0.000786 ! Fit after self-cal, rms=0.088689Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088689Jy sigma=0.000786 ! Fit after self-cal, rms=0.088694Jy sigma=0.000786 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.248 mas, bmaj=11.11 mas, bpa=4.164 degrees ! Estimated noise=1812.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000665973 Jy ! Component: 100 - total flux cleaned = 0.000620334 Jy ! Component: 150 - total flux cleaned = 0.000621218 Jy ! Component: 200 - total flux cleaned = 0.00065922 Jy ! Total flux subtracted in 200 components = 0.00065922 Jy ! Clean residual min=-0.005041 max=0.005261 Jy/beam ! Clean residual mean=0.000017 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.456301 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.456301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088650Jy sigma=0.000785 ! Fit after self-cal, rms=0.088648Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106743 Jy ! Component: 100 - total flux cleaned = 6.72919e-05 Jy ! Component: 150 - total flux cleaned = 9.90723e-05 Jy ! Component: 200 - total flux cleaned = 0.000128401 Jy ! Total flux subtracted in 200 components = 0.000128401 Jy ! Clean residual min=-0.005000 max=0.005213 Jy/beam ! Clean residual mean=0.000017 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.45643 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.45643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088623Jy sigma=0.000785 ! Fit after self-cal, rms=0.088622Jy sigma=0.000785 ! Inverting map ! Added new window around map position (19, -103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033126 Jy ! Component: 100 - total flux cleaned = 0.00322464 Jy ! Component: 150 - total flux cleaned = 0.00322387 Jy ! Component: 200 - total flux cleaned = 0.00349848 Jy ! Total flux subtracted in 200 components = 0.00349848 Jy ! Clean residual min=-0.004063 max=0.004290 Jy/beam ! Clean residual mean=0.000013 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.459928 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.459928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088358Jy sigma=0.000783 ! Fit after self-cal, rms=0.088348Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088348Jy sigma=0.000783 ! Fit after self-cal, rms=0.088190Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=11.11 mas, bpa=4.16 degrees ! Estimated noise=1809.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.56576e-05 Jy ! Component: 100 - total flux cleaned = 8.21231e-05 Jy ! Component: 150 - total flux cleaned = -7.3601e-05 Jy ! Component: 200 - total flux cleaned = -7.29604e-05 Jy ! Total flux subtracted in 200 components = -7.29604e-05 Jy ! Clean residual min=-0.004040 max=0.004053 Jy/beam ! Clean residual mean=0.000013 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.459855 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 115 components and 0.459855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088126Jy sigma=0.000782 ! Fit after self-cal, rms=0.088124Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.49149e-05 Jy ! Component: 100 - total flux cleaned = -1.37977e-05 Jy ! Component: 150 - total flux cleaned = -1.31719e-05 Jy ! Component: 200 - total flux cleaned = 6.46975e-05 Jy ! Total flux subtracted in 200 components = 6.46975e-05 Jy ! Clean residual min=-0.003948 max=0.004003 Jy/beam ! Clean residual mean=0.000013 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.45992 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 0.45992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088091Jy sigma=0.000781 ! Fit after self-cal, rms=0.088090Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088090Jy sigma=0.000781 ! Fit after self-cal, rms=0.088065Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=14.76 mas, bpa=-9.14 degrees ! Estimated noise=2190.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559286 Jy ! Component: 100 - total flux cleaned = 0.000610676 Jy ! Component: 150 - total flux cleaned = 0.000653119 Jy ! Component: 200 - total flux cleaned = 0.000653218 Jy ! Total flux subtracted in 200 components = 0.000653218 Jy ! Clean residual min=-0.004078 max=0.003868 Jy/beam ! Clean residual mean=0.000026 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.460573 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.460573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088052Jy sigma=0.000781 ! Fit after self-cal, rms=0.088048Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166752 Jy ! Component: 100 - total flux cleaned = 0.000168761 Jy ! Component: 150 - total flux cleaned = 0.000139611 Jy ! Component: 200 - total flux cleaned = 0.000168819 Jy ! Total flux subtracted in 200 components = 0.000168819 Jy ! Clean residual min=-0.003968 max=0.003811 Jy/beam ! Clean residual mean=0.000026 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.460742 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 143 components and 0.460742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088043Jy sigma=0.000781 ! Fit after self-cal, rms=0.088042Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=11.11 mas, bpa=4.136 degrees ! Estimated noise=1809.15 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 11.11 at 4.136 degrees (North through East) ! Clean map min=-0.0041431 max=0.39375 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=9.714 mas, bpa=5.02 degrees ! Estimated noise=2376.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298007 Jy ! Component: 100 - total flux cleaned = 0.366092 Jy ! Component: 150 - total flux cleaned = 0.395856 Jy ! Component: 200 - total flux cleaned = 0.413885 Jy ! Total flux subtracted in 200 components = 0.413885 Jy ! Clean residual min=-0.008674 max=0.011541 Jy/beam ! Clean residual mean=-0.000067 rms=0.002611 Jy/beam ! Combined flux in latest and established models = 0.413885 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.413885 Jy ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=11.11 mas, bpa=4.136 degrees ! Estimated noise=1809.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169414 Jy ! Component: 100 - total flux cleaned = 0.026478 Jy ! Component: 150 - total flux cleaned = 0.0328182 Jy ! Component: 200 - total flux cleaned = 0.0362234 Jy ! Total flux subtracted in 200 components = 0.0362234 Jy ! Clean residual min=-0.005573 max=0.005448 Jy/beam ! Clean residual mean=0.000009 rms=0.001284 Jy/beam ! Combined flux in latest and established models = 0.450109 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 74 components and 0.450109 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.901 mas, bmaj=14.76 mas, bpa=-9.14 degrees ! Estimated noise=2190.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507323 Jy ! Component: 100 - total flux cleaned = 0.0063226 Jy ! Component: 150 - total flux cleaned = 0.00681772 Jy ! Component: 200 - total flux cleaned = 0.00734141 Jy ! Total flux subtracted in 200 components = 0.00734141 Jy ! Clean residual min=-0.004720 max=0.004122 Jy/beam ! Clean residual mean=0.000027 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.45745 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003816 Jy ! Component: 100 - total flux cleaned = 0.000719779 Jy ! Component: 150 - total flux cleaned = 0.00102014 Jy ! Component: 200 - total flux cleaned = 0.00118497 Jy ! Total flux subtracted in 200 components = 0.00118497 Jy ! Clean residual min=-0.004159 max=0.003867 Jy/beam ! Clean residual mean=0.000027 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.458635 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 104 components and 0.458635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.249 mas, bmaj=11.11 mas, bpa=4.136 degrees ! Estimated noise=1809.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519517 Jy ! Component: 100 - total flux cleaned = 0.000607758 Jy ! Component: 150 - total flux cleaned = 0.000549175 Jy ! Component: 200 - total flux cleaned = 0.000549027 Jy ! Total flux subtracted in 200 components = 0.000549027 Jy ! Clean residual min=-0.004228 max=0.003828 Jy/beam ! Clean residual mean=0.000014 rms=0.001006 Jy/beam ! Combined flux in latest and established models = 0.459184 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 117 components and 0.459184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088088Jy sigma=0.000782 ! Fit after self-cal, rms=0.088087Jy sigma=0.000782 wmodel J1357-1527_S_2015_03_17_pus_map.mod ! Writing 117 model components to file: J1357-1527_S_2015_03_17_pus_map.mod wobs J1357-1527_S_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1357-1527_S_2015_03_17_pus_uvs.fits wwins J1357-1527_S_2015_03_17_pus_map.win ! wwins: Wrote 2 windows to J1357-1527_S_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000225034 Jy ! Component: 100 - total flux cleaned = 0.00134219 Jy ! Component: 150 - total flux cleaned = 0.00214338 Jy ! Component: 200 - total flux cleaned = 0.00278699 Jy ! Component: 250 - total flux cleaned = 0.0033463 Jy ! Component: 300 - total flux cleaned = 0.00377596 Jy ! Component: 350 - total flux cleaned = 0.00424082 Jy ! Component: 400 - total flux cleaned = 0.00463958 Jy ! Component: 450 - total flux cleaned = 0.00492991 Jy ! Component: 500 - total flux cleaned = 0.0052565 Jy ! Component: 550 - total flux cleaned = 0.00557206 Jy ! Component: 600 - total flux cleaned = 0.00587706 Jy ! Component: 650 - total flux cleaned = 0.00604686 Jy ! Component: 700 - total flux cleaned = 0.00612997 Jy ! Component: 750 - total flux cleaned = 0.00625215 Jy ! Component: 800 - total flux cleaned = 0.0064114 Jy ! Component: 850 - total flux cleaned = 0.00648928 Jy ! Component: 900 - total flux cleaned = 0.00652768 Jy ! Component: 950 - total flux cleaned = 0.00664058 Jy ! Component: 1000 - total flux cleaned = 0.00664074 Jy ! Component: 1050 - total flux cleaned = 0.00685725 Jy ! Component: 1100 - total flux cleaned = 0.00689189 Jy ! Component: 1150 - total flux cleaned = 0.0069267 Jy ! Component: 1200 - total flux cleaned = 0.00706426 Jy ! Component: 1250 - total flux cleaned = 0.00719874 Jy ! Component: 1300 - total flux cleaned = 0.00716539 Jy ! Component: 1350 - total flux cleaned = 0.00723063 Jy ! Component: 1400 - total flux cleaned = 0.00726239 Jy ! Component: 1450 - total flux cleaned = 0.0072622 Jy ! Component: 1500 - total flux cleaned = 0.00729322 Jy ! Component: 1550 - total flux cleaned = 0.00726278 Jy ! Component: 1600 - total flux cleaned = 0.00732314 Jy ! Component: 1650 - total flux cleaned = 0.00729311 Jy ! Component: 1700 - total flux cleaned = 0.00741032 Jy ! Component: 1750 - total flux cleaned = 0.00743883 Jy ! Component: 1800 - total flux cleaned = 0.00738153 Jy ! Component: 1850 - total flux cleaned = 0.00738157 Jy ! Component: 1900 - total flux cleaned = 0.0073258 Jy ! Component: 1950 - total flux cleaned = 0.00732567 Jy ! Component: 2000 - total flux cleaned = 0.00732542 Jy ! Component: 2050 - total flux cleaned = 0.00732516 Jy ! Component: 2100 - total flux cleaned = 0.00735173 Jy ! Component: 2150 - total flux cleaned = 0.00732535 Jy ! Component: 2200 - total flux cleaned = 0.00729906 Jy ! Component: 2250 - total flux cleaned = 0.00727331 Jy ! Component: 2300 - total flux cleaned = 0.00729884 Jy ! Component: 2350 - total flux cleaned = 0.0072737 Jy ! Component: 2400 - total flux cleaned = 0.00729888 Jy ! Component: 2450 - total flux cleaned = 0.00732375 Jy ! Component: 2500 - total flux cleaned = 0.00729924 Jy ! Component: 2550 - total flux cleaned = 0.00725033 Jy ! Component: 2600 - total flux cleaned = 0.00727451 Jy ! Component: 2650 - total flux cleaned = 0.00732221 Jy ! Component: 2700 - total flux cleaned = 0.00729839 Jy ! Component: 2750 - total flux cleaned = 0.00727487 Jy ! Component: 2800 - total flux cleaned = 0.00729819 Jy ! Component: 2850 - total flux cleaned = 0.00725191 Jy ! Component: 2900 - total flux cleaned = 0.00729794 Jy ! Component: 2950 - total flux cleaned = 0.00734331 Jy ! Component: 3000 - total flux cleaned = 0.0073207 Jy ! Component: 3050 - total flux cleaned = 0.00734333 Jy ! Component: 3100 - total flux cleaned = 0.00738805 Jy ! Component: 3150 - total flux cleaned = 0.00743227 Jy ! Component: 3200 - total flux cleaned = 0.00745425 Jy ! Component: 3250 - total flux cleaned = 0.00747618 Jy ! Component: 3300 - total flux cleaned = 0.00747624 Jy ! Component: 3350 - total flux cleaned = 0.00749798 Jy ! Component: 3400 - total flux cleaned = 0.00754096 Jy ! Component: 3450 - total flux cleaned = 0.00756225 Jy ! Component: 3500 - total flux cleaned = 0.00751942 Jy ! Component: 3550 - total flux cleaned = 0.00756197 Jy ! Component: 3600 - total flux cleaned = 0.00754096 Jy ! Component: 3650 - total flux cleaned = 0.00758312 Jy ! Component: 3700 - total flux cleaned = 0.00762512 Jy ! Component: 3750 - total flux cleaned = 0.00768777 Jy ! Component: 3800 - total flux cleaned = 0.0077501 Jy ! Component: 3850 - total flux cleaned = 0.00775008 Jy ! Component: 3900 - total flux cleaned = 0.00779121 Jy ! Component: 3950 - total flux cleaned = 0.00779121 Jy ! Component: 4000 - total flux cleaned = 0.00793426 Jy ! Component: 4050 - total flux cleaned = 0.0078935 Jy ! Total flux subtracted in 4096 components = 0.00793415 Jy ! Clean residual min=-0.001358 max=0.001205 Jy/beam ! Clean residual mean=0.000012 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.467118 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 376 components and 0.467118 Jy ![Exited script file: muppet] wmap "J1357-1527_S_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 11.11 at 4.136 degrees (North through East) ! Clean map min=-0.0029246 max=0.3943 Jy/beam ! Writing clean map to FITS file: J1357-1527_S_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.394298 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000342459 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.260558 0.260558 0.521117 1.04223 2.08447 4.16894 8.33787 16.6757 33.3515 66.703 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.394 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.249 x 11.11 at 4.136 degrees (North through East) ! Clean map min=-0.0029246 max=0.3943 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1357-1527_S_2015_03_17_pus_uvs.log closed on Fri Dec 30 23:01:11 2016