! Started logfile: J1356-3421_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:26:46 2017 obs J1356-3421_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1356-3421_S_2015_01_23_pus_uva.fits ! AN table 1: 103 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.797627 visibilities/baseline/integration-bin. ! Found source: J1356-3421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 14788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1356-3421_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 112 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.883582Jy sigma=0.006901 ! Fit after self-cal, rms=0.852053Jy sigma=0.006677 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=6.028 mas, bpa=-1.813 degrees ! Estimated noise=1196.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107878 Jy ! Component: 100 - total flux cleaned = 0.154713 Jy ! Total flux subtracted in 100 components = 0.154713 Jy ! Clean residual min=-0.019363 max=0.051969 Jy/beam ! Clean residual mean=-0.000451 rms=0.006707 Jy/beam ! Combined flux in latest and established models = 0.154713 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.154713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265437Jy sigma=0.001414 ! Fit after self-cal, rms=0.265315Jy sigma=0.001412 ! Inverting map ! Added new window around map position (4, -8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488714 Jy ! Component: 100 - total flux cleaned = 0.0800991 Jy ! Total flux subtracted in 100 components = 0.0800991 Jy ! Clean residual min=-0.014976 max=0.041095 Jy/beam ! Clean residual mean=-0.000329 rms=0.004984 Jy/beam ! Combined flux in latest and established models = 0.234812 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.234812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.246350Jy sigma=0.001193 ! Fit after self-cal, rms=0.244715Jy sigma=0.001178 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029624 Jy ! Component: 100 - total flux cleaned = 0.0483465 Jy ! Total flux subtracted in 100 components = 0.0483465 Jy ! Clean residual min=-0.012798 max=0.030105 Jy/beam ! Clean residual mean=-0.000254 rms=0.004105 Jy/beam ! Combined flux in latest and established models = 0.283159 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.283159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236188Jy sigma=0.001077 ! Fit after self-cal, rms=0.235625Jy sigma=0.001071 ! Inverting map ! Added new window around map position (8.5, -18). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265259 Jy ! Component: 100 - total flux cleaned = 0.0424714 Jy ! Total flux subtracted in 100 components = 0.0424714 Jy ! Clean residual min=-0.010455 max=0.026557 Jy/beam ! Clean residual mean=-0.000206 rms=0.003399 Jy/beam ! Combined flux in latest and established models = 0.32563 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 0.32563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229094Jy sigma=0.000988 ! Fit after self-cal, rms=0.228147Jy sigma=0.000978 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.302 mas, bpa=-2.926 degrees ! Estimated noise=795.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342338 Jy ! Component: 100 - total flux cleaned = 0.0566734 Jy ! Component: 150 - total flux cleaned = 0.0729932 Jy ! Component: 200 - total flux cleaned = 0.0849625 Jy ! Total flux subtracted in 200 components = 0.0849625 Jy ! Clean residual min=-0.011887 max=0.024556 Jy/beam ! Clean residual mean=-0.000274 rms=0.004086 Jy/beam ! Combined flux in latest and established models = 0.410593 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 105 components and 0.410593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220525Jy sigma=0.000890 ! Fit after self-cal, rms=0.219814Jy sigma=0.000882 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.78 HN 1.61 KP 1.07 ! LA 0.92 MK 0.99 NL 1.37 OV 1.04 ! PT 0.99 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.77 HN 1.00* KP 0.98 ! LA 0.90 MK 0.98 NL 1.46 OV 1.06 ! PT 0.97 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 1.00* KP 0.85 ! LA 0.72 MK 0.97 NL 1.27 OV 0.97 ! PT 0.96 SC 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 0.91 HN 1.94 KP 0.80 ! LA 0.77 MK 0.95 NL 1.18 OV 1.03 ! PT 0.99 SC 0.93 ! ! ! Fit before self-cal, rms=0.219814Jy sigma=0.000882 ! Fit after self-cal, rms=0.219843Jy sigma=0.000798 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=7.166 mas, bpa=-1.879 degrees ! Estimated noise=797.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24, 89.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920168 Jy ! Component: 100 - total flux cleaned = 0.0118632 Jy ! Component: 150 - total flux cleaned = 0.0128743 Jy ! Component: 200 - total flux cleaned = 0.0134256 Jy ! Total flux subtracted in 200 components = 0.0134256 Jy ! Clean residual min=-0.005473 max=0.006377 Jy/beam ! Clean residual mean=0.000029 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.424018 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 141 components and 0.424018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219415Jy sigma=0.000789 ! Fit after self-cal, rms=0.219661Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219661Jy sigma=0.000787 ! Fit after self-cal, rms=0.224868Jy sigma=0.000787 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=7.136 mas, bpa=-1.824 degrees ! Estimated noise=792.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328272 Jy ! Component: 100 - total flux cleaned = 0.00458689 Jy ! Component: 150 - total flux cleaned = 0.00513893 Jy ! Component: 200 - total flux cleaned = 0.00543511 Jy ! Total flux subtracted in 200 components = 0.00543511 Jy ! Clean residual min=-0.005438 max=0.005443 Jy/beam ! Clean residual mean=0.000032 rms=0.001238 Jy/beam ! Combined flux in latest and established models = 0.429453 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 154 components and 0.429453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224717Jy sigma=0.000784 ! Fit after self-cal, rms=0.224711Jy sigma=0.000784 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783539 Jy ! Component: 100 - total flux cleaned = 0.000785947 Jy ! Component: 150 - total flux cleaned = 0.000951236 Jy ! Component: 200 - total flux cleaned = 0.00102897 Jy ! Total flux subtracted in 200 components = 0.00102897 Jy ! Clean residual min=-0.005531 max=0.005292 Jy/beam ! Clean residual mean=0.000034 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.430482 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.430482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224621Jy sigma=0.000783 ! Fit after self-cal, rms=0.224612Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224612Jy sigma=0.000783 ! Fit after self-cal, rms=0.234741Jy sigma=0.000782 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.793 mas, bmaj=7.113 mas, bpa=-1.403 degrees ! Estimated noise=793.808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233198 Jy ! Component: 100 - total flux cleaned = 0.0028048 Jy ! Component: 150 - total flux cleaned = 0.00294056 Jy ! Component: 200 - total flux cleaned = 0.00306706 Jy ! Total flux subtracted in 200 components = 0.00306706 Jy ! Clean residual min=-0.004584 max=0.004783 Jy/beam ! Clean residual mean=0.000026 rms=0.001148 Jy/beam ! Combined flux in latest and established models = 0.433549 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 175 components and 0.433549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234650Jy sigma=0.000782 ! Fit after self-cal, rms=0.234657Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213949 Jy ! Component: 100 - total flux cleaned = 0.000274053 Jy ! Component: 150 - total flux cleaned = 0.000332693 Jy ! Component: 200 - total flux cleaned = 0.000332922 Jy ! Total flux subtracted in 200 components = 0.000332922 Jy ! Clean residual min=-0.004506 max=0.004668 Jy/beam ! Clean residual mean=0.000027 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.433882 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 183 components and 0.433882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234613Jy sigma=0.000781 ! Fit after self-cal, rms=0.234607Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234607Jy sigma=0.000781 ! Fit after self-cal, rms=0.234020Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.337 mas, bmaj=22.33 mas, bpa=0.2637 degrees ! Estimated noise=1105.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248045 Jy ! Component: 100 - total flux cleaned = 0.00279475 Jy ! Component: 150 - total flux cleaned = 0.00285044 Jy ! Component: 200 - total flux cleaned = 0.0028503 Jy ! Total flux subtracted in 200 components = 0.0028503 Jy ! Clean residual min=-0.005755 max=0.005859 Jy/beam ! Clean residual mean=0.000055 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.436733 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 188 components and 0.436733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233973Jy sigma=0.000781 ! Fit after self-cal, rms=0.233950Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.8389e-05 Jy ! Component: 100 - total flux cleaned = 7.74087e-05 Jy ! Component: 150 - total flux cleaned = 3.36936e-05 Jy ! Component: 200 - total flux cleaned = 3.38216e-05 Jy ! Total flux subtracted in 200 components = 3.38216e-05 Jy ! Clean residual min=-0.005760 max=0.005817 Jy/beam ! Clean residual mean=0.000055 rms=0.001708 Jy/beam ! Combined flux in latest and established models = 0.436766 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 191 components and 0.436766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233921Jy sigma=0.000781 ! Fit after self-cal, rms=0.233913Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.078 mas, bpa=-1.003 degrees ! Estimated noise=793.398 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.786 x 7.078 at -1.003 degrees (North through East) ! Clean map min=-0.0047172 max=0.11937 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.235 mas, bmaj=5.857 mas, bpa=0.1925 degrees ! Estimated noise=1189.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111841 Jy ! Component: 100 - total flux cleaned = 0.174994 Jy ! Component: 150 - total flux cleaned = 0.220279 Jy ! Component: 200 - total flux cleaned = 0.254996 Jy ! Total flux subtracted in 200 components = 0.254996 Jy ! Clean residual min=-0.011762 max=0.024013 Jy/beam ! Clean residual mean=-0.000264 rms=0.003826 Jy/beam ! Combined flux in latest and established models = 0.254996 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.254996 Jy ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.078 mas, bpa=-1.003 degrees ! Estimated noise=793.398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506461 Jy ! Component: 100 - total flux cleaned = 0.0848133 Jy ! Component: 150 - total flux cleaned = 0.108518 Jy ! Component: 200 - total flux cleaned = 0.125652 Jy ! Total flux subtracted in 200 components = 0.125652 Jy ! Clean residual min=-0.006602 max=0.013388 Jy/beam ! Clean residual mean=-0.000150 rms=0.002453 Jy/beam ! Combined flux in latest and established models = 0.380647 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 99 components and 0.380647 Jy ! Inverting map ! Added new window around map position (-2, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140502 Jy ! Component: 100 - total flux cleaned = 0.0241757 Jy ! Component: 150 - total flux cleaned = 0.0319657 Jy ! Component: 200 - total flux cleaned = 0.0379978 Jy ! Total flux subtracted in 200 components = 0.0379978 Jy ! Clean residual min=-0.004563 max=0.005555 Jy/beam ! Clean residual mean=-0.000031 rms=0.001262 Jy/beam ! Combined flux in latest and established models = 0.418645 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 144 components and 0.418645 Jy ! Inverting map ! Added new window around map position (11, -28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00568872 Jy ! Component: 100 - total flux cleaned = 0.00967861 Jy ! Component: 150 - total flux cleaned = 0.0127945 Jy ! Component: 200 - total flux cleaned = 0.0149771 Jy ! Total flux subtracted in 200 components = 0.0149771 Jy ! Clean residual min=-0.004156 max=0.003901 Jy/beam ! Clean residual mean=0.000014 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.433622 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 174 components and 0.433622 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.337 mas, bmaj=22.33 mas, bpa=0.2637 degrees ! Estimated noise=1105.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142507 Jy ! Component: 100 - total flux cleaned = 0.00175859 Jy ! Component: 150 - total flux cleaned = 0.00214704 Jy ! Component: 200 - total flux cleaned = 0.00223398 Jy ! Total flux subtracted in 200 components = 0.00223398 Jy ! Clean residual min=-0.006161 max=0.005753 Jy/beam ! Clean residual mean=0.000044 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.435856 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164271 Jy ! Component: 100 - total flux cleaned = 0.000309863 Jy ! Component: 150 - total flux cleaned = 0.000378466 Jy ! Component: 200 - total flux cleaned = 0.000378532 Jy ! Total flux subtracted in 200 components = 0.000378532 Jy ! Clean residual min=-0.006148 max=0.005740 Jy/beam ! Clean residual mean=0.000046 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.436235 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 210 components and 0.436235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=7.078 mas, bpa=-1.003 degrees ! Estimated noise=793.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243005 Jy ! Component: 100 - total flux cleaned = 0.000245839 Jy ! Component: 150 - total flux cleaned = 0.00031467 Jy ! Component: 200 - total flux cleaned = 0.000433721 Jy ! Total flux subtracted in 200 components = 0.000433721 Jy ! Clean residual min=-0.004404 max=0.003881 Jy/beam ! Clean residual mean=0.000022 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.436669 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 232 components and 0.436669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233557Jy sigma=0.000777 ! Fit after self-cal, rms=0.233574Jy sigma=0.000777 wmodel J1356-3421_S_2015_01_23_pus_map.mod ! Writing 232 model components to file: J1356-3421_S_2015_01_23_pus_map.mod wobs J1356-3421_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1356-3421_S_2015_01_23_pus_uvs.fits wwins J1356-3421_S_2015_01_23_pus_map.win ! wwins: Wrote 6 windows to J1356-3421_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.06505e-05 Jy ! Component: 100 - total flux cleaned = 0.000402635 Jy ! Component: 150 - total flux cleaned = 0.00070301 Jy ! Component: 200 - total flux cleaned = 0.00138531 Jy ! Component: 250 - total flux cleaned = 0.00198223 Jy ! Component: 300 - total flux cleaned = 0.00250381 Jy ! Component: 350 - total flux cleaned = 0.00265377 Jy ! Component: 400 - total flux cleaned = 0.00289641 Jy ! Component: 450 - total flux cleaned = 0.00294183 Jy ! Component: 500 - total flux cleaned = 0.00280428 Jy ! Component: 550 - total flux cleaned = 0.00271485 Jy ! Component: 600 - total flux cleaned = 0.00271446 Jy ! Component: 650 - total flux cleaned = 0.00250082 Jy ! Component: 700 - total flux cleaned = 0.00245888 Jy ! Component: 750 - total flux cleaned = 0.00233649 Jy ! Component: 800 - total flux cleaned = 0.00225776 Jy ! Component: 850 - total flux cleaned = 0.00221992 Jy ! Component: 900 - total flux cleaned = 0.00214325 Jy ! Component: 950 - total flux cleaned = 0.00203153 Jy ! Component: 1000 - total flux cleaned = 0.00203229 Jy ! Component: 1050 - total flux cleaned = 0.00206785 Jy ! Component: 1100 - total flux cleaned = 0.00196142 Jy ! Component: 1150 - total flux cleaned = 0.00192678 Jy ! Component: 1200 - total flux cleaned = 0.00172149 Jy ! Component: 1250 - total flux cleaned = 0.00165469 Jy ! Component: 1300 - total flux cleaned = 0.00158774 Jy ! Component: 1350 - total flux cleaned = 0.00145792 Jy ! Component: 1400 - total flux cleaned = 0.00136197 Jy ! Component: 1450 - total flux cleaned = 0.00129869 Jy ! Component: 1500 - total flux cleaned = 0.00129819 Jy ! Component: 1550 - total flux cleaned = 0.00126663 Jy ! Component: 1600 - total flux cleaned = 0.00120554 Jy ! Component: 1650 - total flux cleaned = 0.0011459 Jy ! Component: 1700 - total flux cleaned = 0.00117593 Jy ! Component: 1750 - total flux cleaned = 0.00126353 Jy ! Component: 1800 - total flux cleaned = 0.00132076 Jy ! Component: 1850 - total flux cleaned = 0.00132026 Jy ! Component: 1900 - total flux cleaned = 0.00132026 Jy ! Component: 1950 - total flux cleaned = 0.00134764 Jy ! Component: 2000 - total flux cleaned = 0.00126598 Jy ! Component: 2050 - total flux cleaned = 0.0013749 Jy ! Component: 2100 - total flux cleaned = 0.00137493 Jy ! Component: 2150 - total flux cleaned = 0.00137497 Jy ! Component: 2200 - total flux cleaned = 0.00140118 Jy ! Component: 2250 - total flux cleaned = 0.00145318 Jy ! Component: 2300 - total flux cleaned = 0.00153059 Jy ! Component: 2350 - total flux cleaned = 0.00158149 Jy ! Component: 2400 - total flux cleaned = 0.00160644 Jy ! Component: 2450 - total flux cleaned = 0.00163115 Jy ! Component: 2500 - total flux cleaned = 0.00160614 Jy ! Component: 2550 - total flux cleaned = 0.00153276 Jy ! Component: 2600 - total flux cleaned = 0.0014361 Jy ! Component: 2650 - total flux cleaned = 0.00134067 Jy ! Component: 2700 - total flux cleaned = 0.00131698 Jy ! Component: 2750 - total flux cleaned = 0.00131686 Jy ! Component: 2800 - total flux cleaned = 0.00126998 Jy ! Component: 2850 - total flux cleaned = 0.00129314 Jy ! Component: 2900 - total flux cleaned = 0.00122491 Jy ! Component: 2950 - total flux cleaned = 0.00122523 Jy ! Component: 3000 - total flux cleaned = 0.00131503 Jy ! Component: 3050 - total flux cleaned = 0.00122566 Jy ! Component: 3100 - total flux cleaned = 0.00124775 Jy ! Component: 3150 - total flux cleaned = 0.00122582 Jy ! Component: 3200 - total flux cleaned = 0.00120414 Jy ! Component: 3250 - total flux cleaned = 0.00122561 Jy ! Component: 3300 - total flux cleaned = 0.00113993 Jy ! Component: 3350 - total flux cleaned = 0.00111844 Jy ! Component: 3400 - total flux cleaned = 0.00109707 Jy ! Component: 3450 - total flux cleaned = 0.00107596 Jy ! Component: 3500 - total flux cleaned = 0.000992941 Jy ! Component: 3550 - total flux cleaned = 0.000993069 Jy ! Component: 3600 - total flux cleaned = 0.0010136 Jy ! Component: 3650 - total flux cleaned = 0.00095249 Jy ! Component: 3700 - total flux cleaned = 0.000851587 Jy ! Component: 3750 - total flux cleaned = 0.000851663 Jy ! Component: 3800 - total flux cleaned = 0.000752362 Jy ! Component: 3850 - total flux cleaned = 0.000693262 Jy ! Component: 3900 - total flux cleaned = 0.000654173 Jy ! Component: 3950 - total flux cleaned = 0.000634775 Jy ! Component: 4000 - total flux cleaned = 0.00061535 Jy ! Component: 4050 - total flux cleaned = 0.000653829 Jy ! Total flux subtracted in 4096 components = 0.000558098 Jy ! Clean residual min=-0.001485 max=0.001004 Jy/beam ! Clean residual mean=0.000000 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.437227 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 559 components and 0.437227 Jy ![Exited script file: muppet] wmap "J1356-3421_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.786 x 7.078 at -1.003 degrees (North through East) ! Clean map min=-0.0030884 max=0.11535 Jy/beam ! Writing clean map to FITS file: J1356-3421_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11535 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000365865 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951534 0.951534 1.90307 3.80614 7.61227 15.2245 30.4491 60.8982 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.786 x 7.078 at -1.003 degrees (North through East) ! Clean map min=-0.0030884 max=0.11535 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1356-3421_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:26:51 2017