! Started logfile: J1356+4831_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:29:22 2016 obs J1356+4831_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1356+4831_S_2014_08_05_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J1356+4831 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1356+4831_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.988592Jy sigma=0.010864 ! Fit after self-cal, rms=0.953021Jy sigma=0.010505 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=7.877 mas, bpa=41.9 degrees ! Estimated noise=910.686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375839 Jy ! Component: 100 - total flux cleaned = 0.0458615 Jy ! Total flux subtracted in 100 components = 0.0458615 Jy ! Clean residual min=-0.003262 max=0.003230 Jy/beam ! Clean residual mean=-0.000004 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0458615 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0458615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075323Jy sigma=0.000754 ! Fit after self-cal, rms=0.074844Jy sigma=0.000750 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.797 mas, bmaj=8.608 mas, bpa=43.13 degrees ! Estimated noise=530.723 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391226 Jy ! Component: 100 - total flux cleaned = 0.00552072 Jy ! Component: 150 - total flux cleaned = 0.00640524 Jy ! Component: 200 - total flux cleaned = 0.00686682 Jy ! Total flux subtracted in 200 components = 0.00686682 Jy ! Clean residual min=-0.001890 max=0.001750 Jy/beam ! Clean residual mean=-0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0527283 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 49 components and 0.0527283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074604Jy sigma=0.000748 ! Fit after self-cal, rms=0.074615Jy sigma=0.000748 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.76 HN 1.03 KP 1.09 ! LA 1.14 MK 1.00* NL 0.97 OV 1.02 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 0.99 KP 0.99 ! LA 1.02 MK 1.00* NL 1.01 OV 1.06 ! PT 1.06 SC 1.16 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.98 HN 1.12 KP 0.90 ! LA 0.87 MK 1.00* NL 1.00 OV 1.00 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.96 HN 1.05 KP 0.85 ! LA 0.81 MK 1.00* NL 1.05 OV 1.04 ! PT 1.10 SC 0.98 ! ! ! Fit before self-cal, rms=0.074615Jy sigma=0.000748 ! Fit after self-cal, rms=0.072267Jy sigma=0.000745 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.856 mas, bmaj=8.661 mas, bpa=43.14 degrees ! Estimated noise=530.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505995 Jy ! Component: 100 - total flux cleaned = -0.000600892 Jy ! Component: 150 - total flux cleaned = -0.000653716 Jy ! Component: 200 - total flux cleaned = -0.000689356 Jy ! Total flux subtracted in 200 components = -0.000689356 Jy ! Clean residual min=-0.001502 max=0.001438 Jy/beam ! Clean residual mean=-0.000006 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0520389 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.0520389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072261Jy sigma=0.000745 ! Fit after self-cal, rms=0.072204Jy sigma=0.000745 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072204Jy sigma=0.000745 ! Fit after self-cal, rms=0.072100Jy sigma=0.000744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.879 mas, bmaj=8.712 mas, bpa=43.14 degrees ! Estimated noise=529.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488441 Jy ! Component: 100 - total flux cleaned = -0.00071583 Jy ! Component: 150 - total flux cleaned = -0.000749624 Jy ! Component: 200 - total flux cleaned = -0.000778293 Jy ! Total flux subtracted in 200 components = -0.000778293 Jy ! Clean residual min=-0.001365 max=0.001378 Jy/beam ! Clean residual mean=-0.000014 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0512606 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 69 components and 0.0512607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072096Jy sigma=0.000744 ! Fit after self-cal, rms=0.072116Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.37433e-05 Jy ! Component: 100 - total flux cleaned = -6.62625e-05 Jy ! Component: 150 - total flux cleaned = -7.92935e-05 Jy ! Component: 200 - total flux cleaned = -9.10435e-05 Jy ! Total flux subtracted in 200 components = -9.10435e-05 Jy ! Clean residual min=-0.001368 max=0.001398 Jy/beam ! Clean residual mean=-0.000013 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0511696 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.0511696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072115Jy sigma=0.000744 ! Fit after self-cal, rms=0.072115Jy sigma=0.000744 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072115Jy sigma=0.000744 ! Fit after self-cal, rms=0.072243Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.887 mas, bmaj=8.74 mas, bpa=43.1 degrees ! Estimated noise=529.507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00036033 Jy ! Component: 100 - total flux cleaned = -0.000516578 Jy ! Component: 150 - total flux cleaned = -0.0005486 Jy ! Component: 200 - total flux cleaned = -0.000559675 Jy ! Total flux subtracted in 200 components = -0.000559675 Jy ! Clean residual min=-0.001328 max=0.001344 Jy/beam ! Clean residual mean=-0.000014 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0506099 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0506099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072241Jy sigma=0.000744 ! Fit after self-cal, rms=0.072250Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.23997e-05 Jy ! Component: 100 - total flux cleaned = -5.06916e-05 Jy ! Component: 150 - total flux cleaned = -6.12722e-05 Jy ! Component: 200 - total flux cleaned = -6.6092e-05 Jy ! Total flux subtracted in 200 components = -6.6092e-05 Jy ! Clean residual min=-0.001317 max=0.001328 Jy/beam ! Clean residual mean=-0.000014 rms=0.000338 Jy/beam ! Combined flux in latest and established models = 0.0505438 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.0505438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072249Jy sigma=0.000744 ! Fit after self-cal, rms=0.072249Jy sigma=0.000744 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072249Jy sigma=0.000744 ! Fit after self-cal, rms=0.072274Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.678 mas, bmaj=10.97 mas, bpa=54.67 degrees ! Estimated noise=583.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214377 Jy ! Component: 100 - total flux cleaned = -0.000251121 Jy ! Component: 150 - total flux cleaned = -0.000270151 Jy ! Component: 200 - total flux cleaned = -0.000275791 Jy ! Total flux subtracted in 200 components = -0.000275791 Jy ! Clean residual min=-0.001178 max=0.001433 Jy/beam ! Clean residual mean=-0.000022 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0502681 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 85 components and 0.0502681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072273Jy sigma=0.000744 ! Fit after self-cal, rms=0.072279Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.90453e-06 Jy ! Component: 100 - total flux cleaned = 1.0957e-06 Jy ! Component: 150 - total flux cleaned = 1.32602e-06 Jy ! Component: 200 - total flux cleaned = -3.66621e-06 Jy ! Total flux subtracted in 200 components = -3.66621e-06 Jy ! Clean residual min=-0.001182 max=0.001429 Jy/beam ! Clean residual mean=-0.000022 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0502644 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 87 components and 0.0502644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072279Jy sigma=0.000744 ! Fit after self-cal, rms=0.072280Jy sigma=0.000744 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.894 mas, bmaj=8.76 mas, bpa=43.08 degrees ! Estimated noise=529.162 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.894 x 8.76 at 43.08 degrees (North through East) ! Clean map min=-0.0012722 max=0.049618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=8.031 mas, bpa=41.88 degrees ! Estimated noise=925.985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0385363 Jy ! Component: 100 - total flux cleaned = 0.0469849 Jy ! Component: 150 - total flux cleaned = 0.0491528 Jy ! Component: 200 - total flux cleaned = 0.0498643 Jy ! Total flux subtracted in 200 components = 0.0498643 Jy ! Clean residual min=-0.002713 max=0.002643 Jy/beam ! Clean residual mean=-0.000007 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.0498643 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0498643 Jy ! Inverting map and beam ! Estimated beam: bmin=4.894 mas, bmaj=8.76 mas, bpa=43.08 degrees ! Estimated noise=529.162 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227679 Jy ! Component: 100 - total flux cleaned = 0.000286183 Jy ! Component: 150 - total flux cleaned = 0.000357916 Jy ! Component: 200 - total flux cleaned = 0.00043245 Jy ! Total flux subtracted in 200 components = 0.00043245 Jy ! Clean residual min=-0.001430 max=0.001325 Jy/beam ! Clean residual mean=-0.000014 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0502967 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.0502967 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.678 mas, bmaj=10.97 mas, bpa=54.67 degrees ! Estimated noise=583.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.63382e-06 Jy ! Component: 100 - total flux cleaned = 2.62042e-06 Jy ! Component: 150 - total flux cleaned = 1.20374e-05 Jy ! Component: 200 - total flux cleaned = 3.48704e-06 Jy ! Total flux subtracted in 200 components = 3.48704e-06 Jy ! Clean residual min=-0.001181 max=0.001466 Jy/beam ! Clean residual mean=-0.000022 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0503002 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-41, -86.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000769185 Jy ! Component: 100 - total flux cleaned = 0.000564803 Jy ! Component: 150 - total flux cleaned = 0.000396451 Jy ! Component: 200 - total flux cleaned = 0.000269628 Jy ! Total flux subtracted in 200 components = 0.000269628 Jy ! Clean residual min=-0.001076 max=0.001108 Jy/beam ! Clean residual mean=-0.000020 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.0505699 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 61 components and 0.0505699 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.894 mas, bmaj=8.76 mas, bpa=43.08 degrees ! Estimated noise=529.162 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276032 Jy ! Component: 100 - total flux cleaned = -0.000474929 Jy ! Component: 150 - total flux cleaned = -0.000614953 Jy ! Component: 200 - total flux cleaned = -0.000688631 Jy ! Total flux subtracted in 200 components = -0.000688631 Jy ! Clean residual min=-0.001289 max=0.001381 Jy/beam ! Clean residual mean=-0.000012 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.0498812 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 90 components and 0.0498812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072250Jy sigma=0.000743 ! Fit after self-cal, rms=0.072235Jy sigma=0.000743 wmodel J1356+4831_S_2014_08_05_pus_map.mod ! Writing 90 model components to file: J1356+4831_S_2014_08_05_pus_map.mod wobs J1356+4831_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1356+4831_S_2014_08_05_pus_uvs.fits wwins J1356+4831_S_2014_08_05_pus_map.win ! wwins: Wrote 2 windows to J1356+4831_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173402 Jy ! Component: 100 - total flux cleaned = 0.000298529 Jy ! Component: 150 - total flux cleaned = 0.000438872 Jy ! Component: 200 - total flux cleaned = 0.000573056 Jy ! Component: 250 - total flux cleaned = 0.000628091 Jy ! Component: 300 - total flux cleaned = 0.000627951 Jy ! Component: 350 - total flux cleaned = 0.000662737 Jy ! Component: 400 - total flux cleaned = 0.000679418 Jy ! Component: 450 - total flux cleaned = 0.000646303 Jy ! Component: 500 - total flux cleaned = 0.000598019 Jy ! Component: 550 - total flux cleaned = 0.000550724 Jy ! Component: 600 - total flux cleaned = 0.000473504 Jy ! Component: 650 - total flux cleaned = 0.000473662 Jy ! Component: 700 - total flux cleaned = 0.000414023 Jy ! Component: 750 - total flux cleaned = 0.00039942 Jy ! Component: 800 - total flux cleaned = 0.000384882 Jy ! Component: 850 - total flux cleaned = 0.000370735 Jy ! Component: 900 - total flux cleaned = 0.000370898 Jy ! Component: 950 - total flux cleaned = 0.000371093 Jy ! Component: 1000 - total flux cleaned = 0.00037111 Jy ! Component: 1050 - total flux cleaned = 0.0003577 Jy ! Component: 1100 - total flux cleaned = 0.000357908 Jy ! Component: 1150 - total flux cleaned = 0.000331909 Jy ! Component: 1200 - total flux cleaned = 0.000345019 Jy ! Component: 1250 - total flux cleaned = 0.000344965 Jy ! Component: 1300 - total flux cleaned = 0.000357721 Jy ! Component: 1350 - total flux cleaned = 0.000370291 Jy ! Component: 1400 - total flux cleaned = 0.000394897 Jy ! Component: 1450 - total flux cleaned = 0.00040694 Jy ! Component: 1500 - total flux cleaned = 0.000418869 Jy ! Component: 1550 - total flux cleaned = 0.000406978 Jy ! Component: 1600 - total flux cleaned = 0.000454066 Jy ! Component: 1650 - total flux cleaned = 0.000454205 Jy ! Component: 1700 - total flux cleaned = 0.000465796 Jy ! Component: 1750 - total flux cleaned = 0.000477189 Jy ! Component: 1800 - total flux cleaned = 0.000477088 Jy ! Component: 1850 - total flux cleaned = 0.000499415 Jy ! Component: 1900 - total flux cleaned = 0.000510263 Jy ! Component: 1950 - total flux cleaned = 0.000477344 Jy ! Component: 2000 - total flux cleaned = 0.000499029 Jy ! Component: 2050 - total flux cleaned = 0.000477602 Jy ! Component: 2100 - total flux cleaned = 0.000498795 Jy ! Component: 2150 - total flux cleaned = 0.000488241 Jy ! Component: 2200 - total flux cleaned = 0.000498566 Jy ! Component: 2250 - total flux cleaned = 0.000498484 Jy ! Component: 2300 - total flux cleaned = 0.000529042 Jy ! Component: 2350 - total flux cleaned = 0.000529029 Jy ! Component: 2400 - total flux cleaned = 0.000538939 Jy ! Component: 2450 - total flux cleaned = 0.000558857 Jy ! Component: 2500 - total flux cleaned = 0.000578481 Jy ! Component: 2550 - total flux cleaned = 0.000559008 Jy ! Component: 2600 - total flux cleaned = 0.000529998 Jy ! Component: 2650 - total flux cleaned = 0.000520478 Jy ! Component: 2700 - total flux cleaned = 0.000520551 Jy ! Component: 2750 - total flux cleaned = 0.000511066 Jy ! Component: 2800 - total flux cleaned = 0.000473542 Jy ! Component: 2850 - total flux cleaned = 0.000482901 Jy ! Component: 2900 - total flux cleaned = 0.000464337 Jy ! Component: 2950 - total flux cleaned = 0.00046426 Jy ! Component: 3000 - total flux cleaned = 0.000418728 Jy ! Component: 3050 - total flux cleaned = 0.000445899 Jy ! Component: 3100 - total flux cleaned = 0.000436827 Jy ! Component: 3150 - total flux cleaned = 0.000436721 Jy ! Component: 3200 - total flux cleaned = 0.000401379 Jy ! Component: 3250 - total flux cleaned = 0.000401344 Jy ! Component: 3300 - total flux cleaned = 0.000392567 Jy ! Component: 3350 - total flux cleaned = 0.000375264 Jy ! Component: 3400 - total flux cleaned = 0.000366639 Jy ! Component: 3450 - total flux cleaned = 0.000392275 Jy ! Component: 3500 - total flux cleaned = 0.000392217 Jy ! Component: 3550 - total flux cleaned = 0.000366916 Jy ! Component: 3600 - total flux cleaned = 0.000383626 Jy ! Component: 3650 - total flux cleaned = 0.000383662 Jy ! Component: 3700 - total flux cleaned = 0.00036715 Jy ! Component: 3750 - total flux cleaned = 0.000375402 Jy ! Component: 3800 - total flux cleaned = 0.000358947 Jy ! Component: 3850 - total flux cleaned = 0.000358952 Jy ! Component: 3900 - total flux cleaned = 0.00038325 Jy ! Component: 3950 - total flux cleaned = 0.000399268 Jy ! Component: 4000 - total flux cleaned = 0.000399233 Jy ! Component: 4050 - total flux cleaned = 0.000399243 Jy ! Total flux subtracted in 4096 components = 0.000375556 Jy ! Clean residual min=-0.000546 max=0.000495 Jy/beam ! Clean residual mean=-0.000007 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.0502568 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 348 components and 0.0502568 Jy ![Exited script file: muppet] wmap "J1356+4831_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.894 x 8.76 at 43.08 degrees (North through East) ! Clean map min=-0.0010106 max=0.049573 Jy/beam ! Writing clean map to FITS file: J1356+4831_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0495732 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000145582 device "J1356+4831_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1356+4831_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.881015 0.881015 1.76203 3.52406 7.04812 14.0962 28.1925 56.3849 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.894 x 8.76 at 43.08 degrees (North through East) ! Clean map min=-0.0010106 max=0.049573 Jy/beam quit ! Quitting program ! Log file J1356+4831_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:29:28 2016