! Started logfile: J1354-0206_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:58 2017 obs J1354-0206_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1354-0206_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.425926 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1354-0206 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 3680 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1354-0206_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 200 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.390415Jy sigma=0.005118 ! Fit after self-cal, rms=0.372792Jy sigma=0.004910 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=5.998 mas, bpa=2.039 degrees ! Estimated noise=1281.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.50893 Jy ! Component: 100 - total flux cleaned = 0.635 Jy ! Total flux subtracted in 100 components = 0.635 Jy ! Clean residual min=-0.025024 max=0.048827 Jy/beam ! Clean residual mean=-0.000122 rms=0.008217 Jy/beam ! Combined flux in latest and established models = 0.634999 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.634999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189992Jy sigma=0.002131 ! Fit after self-cal, rms=0.190008Jy sigma=0.002131 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.421 mas, bmaj=6.83 mas, bpa=0.6745 degrees ! Estimated noise=957.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0544956 Jy ! Component: 100 - total flux cleaned = 0.0793391 Jy ! Component: 150 - total flux cleaned = 0.0951424 Jy ! Component: 200 - total flux cleaned = 0.103686 Jy ! Total flux subtracted in 200 components = 0.103686 Jy ! Clean residual min=-0.024450 max=0.036144 Jy/beam ! Clean residual mean=-0.000114 rms=0.006486 Jy/beam ! Combined flux in latest and established models = 0.738686 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.738686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171078Jy sigma=0.001974 ! Fit after self-cal, rms=0.171017Jy sigma=0.001974 ! Inverting map ! Added new window around map position (-2.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331146 Jy ! Component: 100 - total flux cleaned = 0.0493544 Jy ! Component: 150 - total flux cleaned = 0.0557779 Jy ! Component: 200 - total flux cleaned = 0.0569101 Jy ! Total flux subtracted in 200 components = 0.0569101 Jy ! Clean residual min=-0.021071 max=0.023158 Jy/beam ! Clean residual mean=-0.000039 rms=0.005118 Jy/beam ! Combined flux in latest and established models = 0.795596 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 50 components and 0.795596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164742Jy sigma=0.001877 ! Fit after self-cal, rms=0.164124Jy sigma=0.001872 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.82 KP 1.00* LA 1.03 ! MK 1.01 NL 0.97 OV 0.99 PT 1.01 ! SC 0.96 ! ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 KP 1.00* LA 0.99 ! MK 1.00 NL 1.05 OV 1.01 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.13 KP 1.00* LA 0.82 ! MK 1.01 NL 1.01 OV 0.94 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 60 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 KP 1.00* LA 0.89 ! MK 0.99 NL 1.12 OV 1.01 PT 0.99 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.164124Jy sigma=0.001872 ! Fit after self-cal, rms=0.150046Jy sigma=0.001714 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.442 mas, bmaj=7.204 mas, bpa=-3.228 degrees ! Estimated noise=989.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00689191 Jy ! Component: 100 - total flux cleaned = 0.00509343 Jy ! Component: 150 - total flux cleaned = 0.00276066 Jy ! Component: 200 - total flux cleaned = 8.15463e-05 Jy ! Total flux subtracted in 200 components = 8.15463e-05 Jy ! Clean residual min=-0.015143 max=0.013757 Jy/beam ! Clean residual mean=0.000093 rms=0.003044 Jy/beam ! Combined flux in latest and established models = 0.795678 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.795678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146562Jy sigma=0.001680 ! Fit after self-cal, rms=0.146246Jy sigma=0.001677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146246Jy sigma=0.001677 ! Fit after self-cal, rms=0.149241Jy sigma=0.001635 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=7.194 mas, bpa=-3.009 degrees ! Estimated noise=996.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423048 Jy ! Component: 100 - total flux cleaned = -0.0057952 Jy ! Component: 150 - total flux cleaned = -0.00602345 Jy ! Component: 200 - total flux cleaned = -0.00622808 Jy ! Total flux subtracted in 200 components = -0.00622808 Jy ! Clean residual min=-0.005023 max=0.005287 Jy/beam ! Clean residual mean=0.000000 rms=0.001259 Jy/beam ! Combined flux in latest and established models = 0.78945 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.78945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148991Jy sigma=0.001632 ! Fit after self-cal, rms=0.149036Jy sigma=0.001632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491819 Jy ! Component: 100 - total flux cleaned = 0.00680697 Jy ! Component: 150 - total flux cleaned = 0.00737165 Jy ! Component: 200 - total flux cleaned = 0.00770451 Jy ! Total flux subtracted in 200 components = 0.00770451 Jy ! Clean residual min=-0.004513 max=0.004379 Jy/beam ! Clean residual mean=0.000004 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.797154 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.797154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148806Jy sigma=0.001629 ! Fit after self-cal, rms=0.148793Jy sigma=0.001629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148793Jy sigma=0.001629 ! Fit after self-cal, rms=0.148944Jy sigma=0.001629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.474 mas, bmaj=7.194 mas, bpa=-2.999 degrees ! Estimated noise=996.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013152 Jy ! Component: 100 - total flux cleaned = -0.0011523 Jy ! Component: 150 - total flux cleaned = -0.000928333 Jy ! Component: 200 - total flux cleaned = -0.000793049 Jy ! Total flux subtracted in 200 components = -0.000793049 Jy ! Clean residual min=-0.004196 max=0.004236 Jy/beam ! Clean residual mean=0.000008 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.796361 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 121 components and 0.796361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148854Jy sigma=0.001628 ! Fit after self-cal, rms=0.148843Jy sigma=0.001628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-127.5, 94.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249897 Jy ! Component: 100 - total flux cleaned = 0.00335568 Jy ! Component: 150 - total flux cleaned = 0.00430592 Jy ! Component: 200 - total flux cleaned = 0.00508539 Jy ! Total flux subtracted in 200 components = 0.00508539 Jy ! Clean residual min=-0.003690 max=0.003676 Jy/beam ! Clean residual mean=0.000004 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.801446 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 148 components and 0.801446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148705Jy sigma=0.001626 ! Fit after self-cal, rms=0.148688Jy sigma=0.001626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148688Jy sigma=0.001626 ! Fit after self-cal, rms=0.148954Jy sigma=0.001626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.024 mas, bmaj=11.55 mas, bpa=8.582 degrees ! Estimated noise=1234.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000804875 Jy ! Component: 100 - total flux cleaned = 0.00159004 Jy ! Component: 150 - total flux cleaned = 0.00238397 Jy ! Component: 200 - total flux cleaned = 0.00297339 Jy ! Total flux subtracted in 200 components = 0.00297339 Jy ! Clean residual min=-0.003946 max=0.003026 Jy/beam ! Clean residual mean=0.000013 rms=0.000939 Jy/beam ! Combined flux in latest and established models = 0.80442 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 165 components and 0.80442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148930Jy sigma=0.001626 ! Fit after self-cal, rms=0.148919Jy sigma=0.001626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853178 Jy ! Component: 100 - total flux cleaned = 0.00152126 Jy ! Component: 150 - total flux cleaned = 0.0021441 Jy ! Component: 200 - total flux cleaned = 0.00272634 Jy ! Total flux subtracted in 200 components = 0.00272634 Jy ! Clean residual min=-0.003688 max=0.002908 Jy/beam ! Clean residual mean=0.000013 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.807146 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 171 components and 0.807146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148907Jy sigma=0.001626 ! Fit after self-cal, rms=0.148905Jy sigma=0.001626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=7.195 mas, bpa=-2.977 degrees ! Estimated noise=996.982 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.475 x 7.195 at -2.977 degrees (North through East) ! Clean map min=-0.0064723 max=0.65551 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148905Jy sigma=0.001626 ! Fit after self-cal, rms=0.458585Jy sigma=0.000816 ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=7.197 mas, bpa=-2.973 degrees ! Estimated noise=996.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.42911e-06 Jy ! Component: 100 - total flux cleaned = 0.000285534 Jy ! Component: 150 - total flux cleaned = 0.00075787 Jy ! Component: 200 - total flux cleaned = 0.00119298 Jy ! Total flux subtracted in 200 components = 0.00119298 Jy ! Clean residual min=-0.003539 max=0.003527 Jy/beam ! Clean residual mean=0.000006 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.808339 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 184 components and 0.808339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458557Jy sigma=0.000815 ! Fit after self-cal, rms=0.458587Jy sigma=0.000815 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000436102 Jy ! Component: 100 - total flux cleaned = 0.00116247 Jy ! Component: 150 - total flux cleaned = 0.00163178 Jy ! Component: 200 - total flux cleaned = 0.0020394 Jy ! Total flux subtracted in 200 components = 0.0020394 Jy ! Clean residual min=-0.003447 max=0.003405 Jy/beam ! Clean residual mean=0.000005 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.810378 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 191 components and 0.810378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458570Jy sigma=0.000814 ! Fit after self-cal, rms=0.458566Jy sigma=0.000814 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458566Jy sigma=0.000814 ! Fit after self-cal, rms=0.457904Jy sigma=0.000814 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.8 mas, bmaj=6.248 mas, bpa=-0.7419 degrees ! Estimated noise=1351.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.510536 Jy ! Component: 100 - total flux cleaned = 0.635122 Jy ! Component: 150 - total flux cleaned = 0.683689 Jy ! Component: 200 - total flux cleaned = 0.709903 Jy ! Total flux subtracted in 200 components = 0.709903 Jy ! Clean residual min=-0.009965 max=0.017225 Jy/beam ! Clean residual mean=-0.000046 rms=0.003104 Jy/beam ! Combined flux in latest and established models = 0.709904 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.709904 Jy ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=7.197 mas, bpa=-2.946 degrees ! Estimated noise=997.171 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20, 46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212081 Jy ! Component: 100 - total flux cleaned = 0.0350509 Jy ! Component: 150 - total flux cleaned = 0.0454827 Jy ! Component: 200 - total flux cleaned = 0.0538049 Jy ! Total flux subtracted in 200 components = 0.0538049 Jy ! Clean residual min=-0.006425 max=0.007439 Jy/beam ! Clean residual mean=-0.000036 rms=0.001724 Jy/beam ! Combined flux in latest and established models = 0.763708 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 59 components and 0.763708 Jy ! Inverting map ! Added new window around map position (20, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774002 Jy ! Component: 100 - total flux cleaned = 0.0137901 Jy ! Component: 150 - total flux cleaned = 0.0190099 Jy ! Component: 200 - total flux cleaned = 0.0235355 Jy ! Total flux subtracted in 200 components = 0.0235355 Jy ! Clean residual min=-0.004598 max=0.004864 Jy/beam ! Clean residual mean=-0.000022 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 0.787244 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 88 components and 0.787244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.023 mas, bmaj=11.55 mas, bpa=8.579 degrees ! Estimated noise=1233.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522906 Jy ! Component: 100 - total flux cleaned = 0.00936076 Jy ! Component: 150 - total flux cleaned = 0.0128176 Jy ! Component: 200 - total flux cleaned = 0.01578 Jy ! Total flux subtracted in 200 components = 0.01578 Jy ! Clean residual min=-0.004484 max=0.003629 Jy/beam ! Clean residual mean=-0.000024 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.803024 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256321 Jy ! Component: 100 - total flux cleaned = 0.00479479 Jy ! Component: 150 - total flux cleaned = 0.00674777 Jy ! Component: 200 - total flux cleaned = 0.00826783 Jy ! Total flux subtracted in 200 components = 0.00826783 Jy ! Clean residual min=-0.004014 max=0.003184 Jy/beam ! Clean residual mean=-0.000013 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.811292 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 160 components and 0.811292 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=7.197 mas, bpa=-2.946 degrees ! Estimated noise=997.171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000770794 Jy ! Component: 100 - total flux cleaned = -0.000365471 Jy ! Component: 150 - total flux cleaned = 0.00035794 Jy ! Component: 200 - total flux cleaned = 0.000858687 Jy ! Total flux subtracted in 200 components = 0.000858687 Jy ! Clean residual min=-0.004086 max=0.003270 Jy/beam ! Clean residual mean=-0.000007 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.812151 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 192 components and 0.812151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.457912Jy sigma=0.000815 ! Fit after self-cal, rms=0.458181Jy sigma=0.000814 wmodel J1354-0206_S_2014_01_04_pus_map.mod ! Writing 192 model components to file: J1354-0206_S_2014_01_04_pus_map.mod wobs J1354-0206_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1354-0206_S_2014_01_04_pus_uvs.fits wwins J1354-0206_S_2014_01_04_pus_map.win ! wwins: Wrote 7 windows to J1354-0206_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000797945 Jy ! Component: 100 - total flux cleaned = -0.000684751 Jy ! Component: 150 - total flux cleaned = -0.000472231 Jy ! Component: 200 - total flux cleaned = -0.000373142 Jy ! Component: 250 - total flux cleaned = -0.000134384 Jy ! Component: 300 - total flux cleaned = -0.000133911 Jy ! Component: 350 - total flux cleaned = -0.000265315 Jy ! Component: 400 - total flux cleaned = -0.000392894 Jy ! Component: 450 - total flux cleaned = -0.000556972 Jy ! Component: 500 - total flux cleaned = -0.000676465 Jy ! Component: 550 - total flux cleaned = -0.000676598 Jy ! Component: 600 - total flux cleaned = -0.000602382 Jy ! Component: 650 - total flux cleaned = -0.000603809 Jy ! Component: 700 - total flux cleaned = -0.000675336 Jy ! Component: 750 - total flux cleaned = -0.000675272 Jy ! Component: 800 - total flux cleaned = -0.000709143 Jy ! Component: 850 - total flux cleaned = -0.0007085 Jy ! Component: 900 - total flux cleaned = -0.000676112 Jy ! Component: 950 - total flux cleaned = -0.000866613 Jy ! Component: 1000 - total flux cleaned = -0.000804476 Jy ! Component: 1050 - total flux cleaned = -0.000957073 Jy ! Component: 1100 - total flux cleaned = -0.000985968 Jy ! Component: 1150 - total flux cleaned = -0.00101481 Jy ! Component: 1200 - total flux cleaned = -0.00112953 Jy ! Component: 1250 - total flux cleaned = -0.00107281 Jy ! Component: 1300 - total flux cleaned = -0.00115625 Jy ! Component: 1350 - total flux cleaned = -0.00121114 Jy ! Component: 1400 - total flux cleaned = -0.00121123 Jy ! Component: 1450 - total flux cleaned = -0.00129121 Jy ! Component: 1500 - total flux cleaned = -0.00136912 Jy ! Component: 1550 - total flux cleaned = -0.00134403 Jy ! Component: 1600 - total flux cleaned = -0.00151947 Jy ! Component: 1650 - total flux cleaned = -0.00154354 Jy ! Component: 1700 - total flux cleaned = -0.00159242 Jy ! Component: 1750 - total flux cleaned = -0.00164015 Jy ! Component: 1800 - total flux cleaned = -0.0017583 Jy ! Component: 1850 - total flux cleaned = -0.00178184 Jy ! Component: 1900 - total flux cleaned = -0.00187332 Jy ! Component: 1950 - total flux cleaned = -0.00196287 Jy ! Component: 2000 - total flux cleaned = -0.00196252 Jy ! Component: 2050 - total flux cleaned = -0.0020714 Jy ! Component: 2100 - total flux cleaned = -0.00209305 Jy ! Component: 2150 - total flux cleaned = -0.00215692 Jy ! Component: 2200 - total flux cleaned = -0.00224066 Jy ! Component: 2250 - total flux cleaned = -0.00232352 Jy ! Component: 2300 - total flux cleaned = -0.00246653 Jy ! Component: 2350 - total flux cleaned = -0.00250676 Jy ! Component: 2400 - total flux cleaned = -0.00262613 Jy ! Component: 2450 - total flux cleaned = -0.00272431 Jy ! Component: 2500 - total flux cleaned = -0.00278257 Jy ! Component: 2550 - total flux cleaned = -0.00285944 Jy ! Component: 2600 - total flux cleaned = -0.00291673 Jy ! Component: 2650 - total flux cleaned = -0.00301051 Jy ! Component: 2700 - total flux cleaned = -0.00301105 Jy ! Component: 2750 - total flux cleaned = -0.00312126 Jy ! Component: 2800 - total flux cleaned = -0.00322968 Jy ! Component: 2850 - total flux cleaned = -0.00326524 Jy ! Component: 2900 - total flux cleaned = -0.00331797 Jy ! Component: 2950 - total flux cleaned = -0.00340541 Jy ! Component: 3000 - total flux cleaned = -0.00349178 Jy ! Component: 3050 - total flux cleaned = -0.00354287 Jy ! Component: 3100 - total flux cleaned = -0.00362762 Jy ! Component: 3150 - total flux cleaned = -0.00371135 Jy ! Component: 3200 - total flux cleaned = -0.00377773 Jy ! Component: 3250 - total flux cleaned = -0.00382695 Jy ! Component: 3300 - total flux cleaned = -0.00389216 Jy ! Component: 3350 - total flux cleaned = -0.0039889 Jy ! Component: 3400 - total flux cleaned = -0.00406846 Jy ! Component: 3450 - total flux cleaned = -0.00416294 Jy ! Component: 3500 - total flux cleaned = -0.00416292 Jy ! Component: 3550 - total flux cleaned = -0.00422514 Jy ! Component: 3600 - total flux cleaned = -0.00430216 Jy ! Component: 3650 - total flux cleaned = -0.00434801 Jy ! Component: 3700 - total flux cleaned = -0.00442361 Jy ! Component: 3750 - total flux cleaned = -0.00448335 Jy ! Component: 3800 - total flux cleaned = -0.0045132 Jy ! Component: 3850 - total flux cleaned = -0.00458716 Jy ! Component: 3900 - total flux cleaned = -0.00460177 Jy ! Component: 3950 - total flux cleaned = -0.00464541 Jy ! Component: 4000 - total flux cleaned = -0.00465982 Jy ! Component: 4050 - total flux cleaned = -0.00473176 Jy ! Total flux subtracted in 4096 components = -0.00476025 Jy ! Clean residual min=-0.000850 max=0.000968 Jy/beam ! Clean residual mean=0.000001 rms=0.000249 Jy/beam ! Combined flux in latest and established models = 0.807391 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 435 components and 0.80739 Jy ![Exited script file: muppet] wmap "J1354-0206_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 7.197 at -2.946 degrees (North through East) ! Clean map min=-0.0023014 max=0.65791 Jy/beam ! Writing clean map to FITS file: J1354-0206_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.657913 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000248345 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.113242 0.113242 0.226484 0.452969 0.905938 1.81188 3.62375 7.2475 14.495 28.99 57.98 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.657 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.478 x 7.197 at -2.946 degrees (North through East) ! Clean map min=-0.0023014 max=0.65791 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1354-0206_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:29:03 2017