! Started logfile: J1352-4412_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:26:41 2017 obs J1352-4412_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1352-4412_S_2015_01_23_pus_uva.fits ! AN table 1: 14 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.374603 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1352-4412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1352-4412_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.836847Jy sigma=0.005056 ! Fit after self-cal, rms=0.784751Jy sigma=0.004890 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=24.46 mas, bpa=11.24 degrees ! Estimated noise=5287.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.164363 Jy ! Component: 100 - total flux cleaned = 0.207029 Jy ! Total flux subtracted in 100 components = 0.207029 Jy ! Clean residual min=-0.030036 max=0.032057 Jy/beam ! Clean residual mean=-0.000095 rms=0.008951 Jy/beam ! Combined flux in latest and established models = 0.20703 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.20703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254793Jy sigma=0.000907 ! Fit after self-cal, rms=0.254767Jy sigma=0.000906 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=29.69 mas, bpa=11.28 degrees ! Estimated noise=4469.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378244 Jy ! Component: 100 - total flux cleaned = 0.0575397 Jy ! Component: 150 - total flux cleaned = 0.069198 Jy ! Component: 200 - total flux cleaned = 0.0763823 Jy ! Total flux subtracted in 200 components = 0.0763823 Jy ! Clean residual min=-0.026982 max=0.024293 Jy/beam ! Clean residual mean=-0.000218 rms=0.007458 Jy/beam ! Combined flux in latest and established models = 0.283412 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 84 components and 0.283412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244628Jy sigma=0.000872 ! Fit after self-cal, rms=0.244230Jy sigma=0.000870 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.59 HN 1.00* KP 1.11 ! LA 0.90 MK 1.00* NL 1.52 OV 1.05 ! PT 1.09 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.74 HN 1.00* KP 1.20 ! LA 0.93 MK 1.00* NL 1.00* OV 0.98 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.72 HN 1.00* KP 0.98 ! LA 0.82 MK 1.00* NL 1.00* OV 1.36 ! PT 1.65 SC 1.12 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.68 HN 1.00* KP 0.80 ! LA 0.88 MK 1.00* NL 1.18 OV 0.94 ! PT 1.05 SC 0.99 ! ! ! Fit before self-cal, rms=0.244230Jy sigma=0.000870 ! Fit after self-cal, rms=0.189932Jy sigma=0.000805 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=31.2 mas, bpa=11.4 degrees ! Estimated noise=4586.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00485547 Jy ! Component: 100 - total flux cleaned = -0.0054261 Jy ! Component: 150 - total flux cleaned = -0.00591718 Jy ! Component: 200 - total flux cleaned = -0.00635704 Jy ! Total flux subtracted in 200 components = -0.00635704 Jy ! Clean residual min=-0.015040 max=0.013503 Jy/beam ! Clean residual mean=-0.000081 rms=0.004415 Jy/beam ! Combined flux in latest and established models = 0.277055 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.277055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189769Jy sigma=0.000803 ! Fit after self-cal, rms=0.189379Jy sigma=0.000800 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189379Jy sigma=0.000800 ! Fit after self-cal, rms=0.191193Jy sigma=0.000800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=31.57 mas, bpa=11.44 degrees ! Estimated noise=4579.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314579 Jy ! Component: 100 - total flux cleaned = -0.0037278 Jy ! Component: 150 - total flux cleaned = -0.00414695 Jy ! Component: 200 - total flux cleaned = -0.00461963 Jy ! Total flux subtracted in 200 components = -0.00461963 Jy ! Clean residual min=-0.013888 max=0.013093 Jy/beam ! Clean residual mean=-0.000071 rms=0.004170 Jy/beam ! Combined flux in latest and established models = 0.272435 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 113 components and 0.272435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191081Jy sigma=0.000799 ! Fit after self-cal, rms=0.191172Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000288499 Jy ! Component: 100 - total flux cleaned = -0.000609704 Jy ! Component: 150 - total flux cleaned = -0.000835912 Jy ! Component: 200 - total flux cleaned = -0.00104846 Jy ! Total flux subtracted in 200 components = -0.00104846 Jy ! Clean residual min=-0.013496 max=0.012837 Jy/beam ! Clean residual mean=-0.000075 rms=0.004101 Jy/beam ! Combined flux in latest and established models = 0.271387 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 122 components and 0.271387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191116Jy sigma=0.000799 ! Fit after self-cal, rms=0.191108Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191108Jy sigma=0.000799 ! Fit after self-cal, rms=0.192243Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.496 mas, bmaj=31.93 mas, bpa=11.48 degrees ! Estimated noise=4577.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220798 Jy ! Component: 100 - total flux cleaned = -0.00248734 Jy ! Component: 150 - total flux cleaned = -0.00290814 Jy ! Component: 200 - total flux cleaned = -0.00321442 Jy ! Total flux subtracted in 200 components = -0.00321442 Jy ! Clean residual min=-0.012866 max=0.012783 Jy/beam ! Clean residual mean=-0.000068 rms=0.003997 Jy/beam ! Combined flux in latest and established models = 0.268172 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 129 components and 0.268172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192157Jy sigma=0.000798 ! Fit after self-cal, rms=0.192162Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325211 Jy ! Component: 100 - total flux cleaned = -0.000585563 Jy ! Component: 150 - total flux cleaned = -0.000770601 Jy ! Component: 200 - total flux cleaned = -0.000942466 Jy ! Total flux subtracted in 200 components = -0.000942466 Jy ! Clean residual min=-0.012642 max=0.012626 Jy/beam ! Clean residual mean=-0.000071 rms=0.003967 Jy/beam ! Combined flux in latest and established models = 0.26723 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 134 components and 0.26723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192120Jy sigma=0.000798 ! Fit after self-cal, rms=0.192113Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192113Jy sigma=0.000798 ! Fit after self-cal, rms=0.193003Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.991 mas, bmaj=43.55 mas, bpa=-0.2347 degrees ! Estimated noise=5596.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00194299 Jy ! Component: 100 - total flux cleaned = -0.00227931 Jy ! Component: 150 - total flux cleaned = -0.00251293 Jy ! Component: 200 - total flux cleaned = -0.00267061 Jy ! Total flux subtracted in 200 components = -0.00267061 Jy ! Clean residual min=-0.014715 max=0.014562 Jy/beam ! Clean residual mean=-0.000113 rms=0.005105 Jy/beam ! Combined flux in latest and established models = 0.264559 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 144 components and 0.264559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192964Jy sigma=0.000797 ! Fit after self-cal, rms=0.192967Jy sigma=0.000797 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165193 Jy ! Component: 100 - total flux cleaned = -0.000370038 Jy ! Component: 150 - total flux cleaned = -0.000506772 Jy ! Component: 200 - total flux cleaned = -0.000631165 Jy ! Total flux subtracted in 200 components = -0.000631165 Jy ! Clean residual min=-0.014691 max=0.014506 Jy/beam ! Clean residual mean=-0.000116 rms=0.005070 Jy/beam ! Combined flux in latest and established models = 0.263928 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 147 components and 0.263928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192954Jy sigma=0.000797 ! Fit after self-cal, rms=0.192946Jy sigma=0.000797 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=32.23 mas, bpa=11.51 degrees ! Estimated noise=4569.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 32.23 at 11.51 degrees (North through East) ! Clean map min=-0.012629 max=0.19737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.906 mas, bmaj=27 mas, bpa=11.52 degrees ! Estimated noise=5665.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.173128 Jy ! Component: 100 - total flux cleaned = 0.218612 Jy ! Component: 150 - total flux cleaned = 0.239848 Jy ! Component: 200 - total flux cleaned = 0.25195 Jy ! Total flux subtracted in 200 components = 0.25195 Jy ! Clean residual min=-0.019869 max=0.014881 Jy/beam ! Clean residual mean=-0.000031 rms=0.004796 Jy/beam ! Combined flux in latest and established models = 0.251949 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.251949 Jy ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=32.23 mas, bpa=11.51 degrees ! Estimated noise=4569.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00950587 Jy ! Component: 100 - total flux cleaned = 0.0140347 Jy ! Component: 150 - total flux cleaned = 0.0148613 Jy ! Component: 200 - total flux cleaned = 0.015148 Jy ! Total flux subtracted in 200 components = 0.015148 Jy ! Clean residual min=-0.012880 max=0.012382 Jy/beam ! Clean residual mean=-0.000066 rms=0.004045 Jy/beam ! Combined flux in latest and established models = 0.267097 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 69 components and 0.267098 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.991 mas, bmaj=43.55 mas, bpa=-0.2347 degrees ! Estimated noise=5596.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103886 Jy ! Component: 100 - total flux cleaned = 0.0010419 Jy ! Component: 150 - total flux cleaned = 0.00104406 Jy ! Component: 200 - total flux cleaned = 0.00105398 Jy ! Total flux subtracted in 200 components = 0.00105398 Jy ! Clean residual min=-0.014950 max=0.014688 Jy/beam ! Clean residual mean=-0.000108 rms=0.005300 Jy/beam ! Combined flux in latest and established models = 0.268152 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57533e-05 Jy ! Component: 100 - total flux cleaned = 2.72095e-05 Jy ! Component: 150 - total flux cleaned = -7.54524e-05 Jy ! Component: 200 - total flux cleaned = -0.000127783 Jy ! Total flux subtracted in 200 components = -0.000127783 Jy ! Clean residual min=-0.014661 max=0.014712 Jy/beam ! Clean residual mean=-0.000107 rms=0.005254 Jy/beam ! Combined flux in latest and established models = 0.268024 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 94 components and 0.268024 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=32.23 mas, bpa=11.51 degrees ! Estimated noise=4569.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116862 Jy ! Component: 100 - total flux cleaned = -0.00110402 Jy ! Component: 150 - total flux cleaned = -0.00105329 Jy ! Component: 200 - total flux cleaned = -0.00105221 Jy ! Total flux subtracted in 200 components = -0.00105221 Jy ! Clean residual min=-0.012216 max=0.012381 Jy/beam ! Clean residual mean=-0.000067 rms=0.003933 Jy/beam ! Combined flux in latest and established models = 0.266971 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.266971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192852Jy sigma=0.000797 ! Fit after self-cal, rms=0.192857Jy sigma=0.000797 wmodel J1352-4412_S_2015_01_23_pus_map.mod ! Writing 112 model components to file: J1352-4412_S_2015_01_23_pus_map.mod wobs J1352-4412_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1352-4412_S_2015_01_23_pus_uvs.fits wwins J1352-4412_S_2015_01_23_pus_map.win ! wwins: Wrote 1 windows to J1352-4412_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00203935 Jy ! Component: 100 - total flux cleaned = -0.00363333 Jy ! Component: 150 - total flux cleaned = -0.00382624 Jy ! Component: 200 - total flux cleaned = -0.00314376 Jy ! Component: 250 - total flux cleaned = -0.00250537 Jy ! Component: 300 - total flux cleaned = -0.00204393 Jy ! Component: 350 - total flux cleaned = -0.00189306 Jy ! Component: 400 - total flux cleaned = -0.00148519 Jy ! Component: 450 - total flux cleaned = -0.00174667 Jy ! Component: 500 - total flux cleaned = -0.00162267 Jy ! Component: 550 - total flux cleaned = -0.00150668 Jy ! Component: 600 - total flux cleaned = -0.00162123 Jy ! Component: 650 - total flux cleaned = -0.00184118 Jy ! Component: 700 - total flux cleaned = -0.00205253 Jy ! Component: 750 - total flux cleaned = -0.00194794 Jy ! Component: 800 - total flux cleaned = -0.00244718 Jy ! Component: 850 - total flux cleaned = -0.00244541 Jy ! Component: 900 - total flux cleaned = -0.00253996 Jy ! Component: 950 - total flux cleaned = -0.00272356 Jy ! Component: 1000 - total flux cleaned = -0.00308508 Jy ! Component: 1050 - total flux cleaned = -0.00334997 Jy ! Component: 1100 - total flux cleaned = -0.00326371 Jy ! Component: 1150 - total flux cleaned = -0.00326538 Jy ! Component: 1200 - total flux cleaned = -0.00309952 Jy ! Component: 1250 - total flux cleaned = -0.00301865 Jy ! Component: 1300 - total flux cleaned = -0.00277793 Jy ! Component: 1350 - total flux cleaned = -0.00254216 Jy ! Component: 1400 - total flux cleaned = -0.00223304 Jy ! Component: 1450 - total flux cleaned = -0.00162396 Jy ! Component: 1500 - total flux cleaned = -0.00124972 Jy ! Component: 1550 - total flux cleaned = -0.000731508 Jy ! Component: 1600 - total flux cleaned = -0.000148169 Jy ! Component: 1650 - total flux cleaned = 6.85387e-05 Jy ! Component: 1700 - total flux cleaned = -2.04127e-06 Jy ! Component: 1750 - total flux cleaned = 6.89072e-05 Jy ! Component: 1800 - total flux cleaned = -1.02245e-06 Jy ! Component: 1850 - total flux cleaned = -0.000139674 Jy ! Component: 1900 - total flux cleaned = -0.000207698 Jy ! Component: 1950 - total flux cleaned = -0.000275346 Jy ! Component: 2000 - total flux cleaned = -0.000343008 Jy ! Component: 2050 - total flux cleaned = -0.000275481 Jy ! Component: 2100 - total flux cleaned = -0.000342456 Jy ! Component: 2150 - total flux cleaned = -0.00047601 Jy ! Component: 2200 - total flux cleaned = -0.000409099 Jy ! Component: 2250 - total flux cleaned = -0.000476599 Jy ! Component: 2300 - total flux cleaned = -0.000209522 Jy ! Component: 2350 - total flux cleaned = -0.00020946 Jy ! Component: 2400 - total flux cleaned = -0.000142998 Jy ! Component: 2450 - total flux cleaned = -0.000210337 Jy ! Component: 2500 - total flux cleaned = -0.000412479 Jy ! Component: 2550 - total flux cleaned = -0.000413434 Jy ! Component: 2600 - total flux cleaned = -0.00075314 Jy ! Component: 2650 - total flux cleaned = -0.000890655 Jy ! Component: 2700 - total flux cleaned = -0.00137468 Jy ! Component: 2750 - total flux cleaned = -0.00158428 Jy ! Component: 2800 - total flux cleaned = -0.00186538 Jy ! Component: 2850 - total flux cleaned = -0.00214812 Jy ! Component: 2900 - total flux cleaned = -0.00243337 Jy ! Component: 2950 - total flux cleaned = -0.0027933 Jy ! Component: 3000 - total flux cleaned = -0.00293879 Jy ! Component: 3050 - total flux cleaned = -0.00323186 Jy ! Component: 3100 - total flux cleaned = -0.0033801 Jy ! Component: 3150 - total flux cleaned = -0.00375413 Jy ! Component: 3200 - total flux cleaned = -0.00398211 Jy ! Component: 3250 - total flux cleaned = -0.00421235 Jy ! Component: 3300 - total flux cleaned = -0.00429059 Jy ! Component: 3350 - total flux cleaned = -0.0046048 Jy ! Component: 3400 - total flux cleaned = -0.00484405 Jy ! Component: 3450 - total flux cleaned = -0.00492333 Jy ! Component: 3500 - total flux cleaned = -0.00541117 Jy ! Component: 3550 - total flux cleaned = -0.00541165 Jy ! Component: 3600 - total flux cleaned = -0.00582892 Jy ! Component: 3650 - total flux cleaned = -0.0060829 Jy ! Component: 3700 - total flux cleaned = -0.00642555 Jy ! Component: 3750 - total flux cleaned = -0.00660027 Jy ! Component: 3800 - total flux cleaned = -0.00686412 Jy ! Component: 3850 - total flux cleaned = -0.00722262 Jy ! Component: 3900 - total flux cleaned = -0.00740479 Jy ! Component: 3950 - total flux cleaned = -0.00768217 Jy ! Component: 4000 - total flux cleaned = -0.00787071 Jy ! Component: 4050 - total flux cleaned = -0.00806184 Jy ! Total flux subtracted in 4096 components = -0.00825498 Jy ! Clean residual min=-0.005575 max=0.005939 Jy/beam ! Clean residual mean=-0.000005 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.258716 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 383 components and 0.258717 Jy ![Exited script file: muppet] wmap "J1352-4412_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 32.23 at 11.51 degrees (North through East) ! Clean map min=-0.0087349 max=0.17556 Jy/beam ! Writing clean map to FITS file: J1352-4412_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.175565 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00212183 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.62572 3.62572 7.25144 14.5029 29.0058 58.0116 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0063 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.175 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 32.23 at 11.51 degrees (North through East) ! Clean map min=-0.0087349 max=0.17556 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1352-4412_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:26:45 2017