! Started logfile: J1350+6132_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:55:53 2017 obs J1350+6132_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1350+6132_S_2015_01_22_pus_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1350+6132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1350+6132_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 244 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002703Jy sigma=0.012299 ! Fit after self-cal, rms=0.968028Jy sigma=0.011897 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.832 mas, bmaj=10.48 mas, bpa=-50.95 degrees ! Estimated noise=1461.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249621 Jy ! Component: 100 - total flux cleaned = 0.0308454 Jy ! Total flux subtracted in 100 components = 0.0308454 Jy ! Clean residual min=-0.004044 max=0.003683 Jy/beam ! Clean residual mean=0.000017 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0308454 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0308454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063450Jy sigma=0.000713 ! Fit after self-cal, rms=0.061894Jy sigma=0.000692 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=10.89 mas, bpa=-50.52 degrees ! Estimated noise=804.864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00495456 Jy ! Component: 100 - total flux cleaned = 0.00684044 Jy ! Component: 150 - total flux cleaned = 0.00798805 Jy ! Component: 200 - total flux cleaned = 0.00848057 Jy ! Total flux subtracted in 200 components = 0.00848057 Jy ! Clean residual min=-0.002776 max=0.002137 Jy/beam ! Clean residual mean=0.000016 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0393259 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0393259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061411Jy sigma=0.000688 ! Fit after self-cal, rms=0.061368Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.99 KP 1.17 ! LA 0.94 MK 0.96 NL 1.03 OV 1.11 ! PT 1.15 SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00* HN 1.00* KP 1.05 ! LA 0.84 MK 0.92 NL 1.01 OV 1.07 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.00* KP 0.90 ! LA 0.73 MK 1.00* NL 1.16 OV 1.04 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 1.00* KP 0.89 ! LA 0.72 MK 1.00* NL 0.94 OV 0.95 ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.061368Jy sigma=0.000688 ! Fit after self-cal, rms=0.057322Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=11.04 mas, bpa=-50.11 degrees ! Estimated noise=795.428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193568 Jy ! Component: 100 - total flux cleaned = -0.000192843 Jy ! Component: 150 - total flux cleaned = -0.000176455 Jy ! Component: 200 - total flux cleaned = -0.000175901 Jy ! Total flux subtracted in 200 components = -0.000175901 Jy ! Clean residual min=-0.001403 max=0.001602 Jy/beam ! Clean residual mean=-0.000002 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.03915 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 39 components and 0.03915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057312Jy sigma=0.000685 ! Fit after self-cal, rms=0.057137Jy sigma=0.000683 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057137Jy sigma=0.000683 ! Fit after self-cal, rms=0.056699Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.696 mas, bmaj=11.12 mas, bpa=-49.96 degrees ! Estimated noise=790.401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.65379e-06 Jy ! Component: 100 - total flux cleaned = -6.11946e-06 Jy ! Component: 150 - total flux cleaned = -6.77585e-06 Jy ! Component: 200 - total flux cleaned = -6.46857e-06 Jy ! Total flux subtracted in 200 components = -6.46857e-06 Jy ! Clean residual min=-0.001428 max=0.001433 Jy/beam ! Clean residual mean=-0.000004 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0391436 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.0391436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056693Jy sigma=0.000683 ! Fit after self-cal, rms=0.056695Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.33944e-05 Jy ! Component: 100 - total flux cleaned = -7.10409e-06 Jy ! Component: 150 - total flux cleaned = -6.13326e-06 Jy ! Component: 200 - total flux cleaned = -2.66439e-05 Jy ! Total flux subtracted in 200 components = -2.66439e-05 Jy ! Clean residual min=-0.001394 max=0.001440 Jy/beam ! Clean residual mean=-0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.0391169 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.0391169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056689Jy sigma=0.000682 ! Fit after self-cal, rms=0.056680Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056680Jy sigma=0.000682 ! Fit after self-cal, rms=0.056832Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.684 mas, bmaj=11.14 mas, bpa=-49.94 degrees ! Estimated noise=790.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.55308e-06 Jy ! Component: 100 - total flux cleaned = -3.50746e-05 Jy ! Component: 150 - total flux cleaned = -3.52839e-05 Jy ! Component: 200 - total flux cleaned = -2.53784e-05 Jy ! Total flux subtracted in 200 components = -2.53784e-05 Jy ! Clean residual min=-0.001361 max=0.001416 Jy/beam ! Clean residual mean=-0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0390915 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.0390915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056828Jy sigma=0.000682 ! Fit after self-cal, rms=0.056830Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.5579e-05 Jy ! Component: 100 - total flux cleaned = -4.82017e-05 Jy ! Component: 150 - total flux cleaned = -4.86122e-05 Jy ! Component: 200 - total flux cleaned = -3.82776e-05 Jy ! Total flux subtracted in 200 components = -3.82776e-05 Jy ! Clean residual min=-0.001392 max=0.001419 Jy/beam ! Clean residual mean=-0.000004 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0390533 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.0390533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056826Jy sigma=0.000682 ! Fit after self-cal, rms=0.056827Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056827Jy sigma=0.000682 ! Fit after self-cal, rms=0.056981Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.232 mas, bmaj=11.63 mas, bpa=-58.42 degrees ! Estimated noise=928.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106784 Jy ! Component: 100 - total flux cleaned = 0.000116115 Jy ! Component: 150 - total flux cleaned = 0.000124612 Jy ! Component: 200 - total flux cleaned = 0.000138571 Jy ! Total flux subtracted in 200 components = 0.000138571 Jy ! Clean residual min=-0.001310 max=0.001490 Jy/beam ! Clean residual mean=-0.000007 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0391918 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 76 components and 0.0391918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056978Jy sigma=0.000682 ! Fit after self-cal, rms=0.056979Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.40868e-06 Jy ! Component: 100 - total flux cleaned = 2.23201e-05 Jy ! Component: 150 - total flux cleaned = 3.04864e-05 Jy ! Component: 200 - total flux cleaned = 3.77179e-05 Jy ! Total flux subtracted in 200 components = 3.77179e-05 Jy ! Clean residual min=-0.001366 max=0.001524 Jy/beam ! Clean residual mean=-0.000006 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0392296 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 0.0392296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056978Jy sigma=0.000682 ! Fit after self-cal, rms=0.056978Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=11.16 mas, bpa=-49.93 degrees ! Estimated noise=791.889 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 11.16 at -49.93 degrees (North through East) ! Clean map min=-0.0017084 max=0.035233 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=10.79 mas, bpa=-50.11 degrees ! Estimated noise=1405.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272246 Jy ! Component: 100 - total flux cleaned = 0.0331289 Jy ! Component: 150 - total flux cleaned = 0.0352688 Jy ! Component: 200 - total flux cleaned = 0.036424 Jy ! Total flux subtracted in 200 components = 0.036424 Jy ! Clean residual min=-0.002966 max=0.002766 Jy/beam ! Clean residual mean=0.000003 rms=0.000795 Jy/beam ! Combined flux in latest and established models = 0.036424 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.036424 Jy ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=11.16 mas, bpa=-49.93 degrees ! Estimated noise=791.889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157315 Jy ! Component: 100 - total flux cleaned = 0.00206692 Jy ! Component: 150 - total flux cleaned = 0.0024026 Jy ! Component: 200 - total flux cleaned = 0.00260909 Jy ! Total flux subtracted in 200 components = 0.00260909 Jy ! Clean residual min=-0.001566 max=0.001578 Jy/beam ! Clean residual mean=-0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.039033 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.039033 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.232 mas, bmaj=11.63 mas, bpa=-58.42 degrees ! Estimated noise=928.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401034 Jy ! Component: 100 - total flux cleaned = 0.000438467 Jy ! Component: 150 - total flux cleaned = 0.000407769 Jy ! Component: 200 - total flux cleaned = 0.000382285 Jy ! Total flux subtracted in 200 components = 0.000382285 Jy ! Clean residual min=-0.001480 max=0.001385 Jy/beam ! Clean residual mean=-0.000007 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0394153 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.45868e-05 Jy ! Component: 100 - total flux cleaned = -4.54276e-05 Jy ! Component: 150 - total flux cleaned = -6.43514e-05 Jy ! Component: 200 - total flux cleaned = -6.4004e-05 Jy ! Total flux subtracted in 200 components = -6.4004e-05 Jy ! Clean residual min=-0.001451 max=0.001390 Jy/beam ! Clean residual mean=-0.000007 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0393513 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 48 components and 0.0393513 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.678 mas, bmaj=11.16 mas, bpa=-49.93 degrees ! Estimated noise=791.889 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146697 Jy ! Component: 100 - total flux cleaned = -0.000132523 Jy ! Component: 150 - total flux cleaned = -0.00011903 Jy ! Component: 200 - total flux cleaned = -8.29393e-05 Jy ! Total flux subtracted in 200 components = -8.29393e-05 Jy ! Clean residual min=-0.001488 max=0.001398 Jy/beam ! Clean residual mean=-0.000004 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0392684 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.0392684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056980Jy sigma=0.000682 ! Fit after self-cal, rms=0.056975Jy sigma=0.000682 wmodel J1350+6132_S_2015_01_22_pus_map.mod ! Writing 59 model components to file: J1350+6132_S_2015_01_22_pus_map.mod wobs J1350+6132_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1350+6132_S_2015_01_22_pus_uvs.fits wwins J1350+6132_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1350+6132_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.30631e-06 Jy ! Component: 100 - total flux cleaned = -0.000190373 Jy ! Component: 150 - total flux cleaned = -0.000277775 Jy ! Component: 200 - total flux cleaned = -0.00045944 Jy ! Component: 250 - total flux cleaned = -0.000592614 Jy ! Component: 300 - total flux cleaned = -0.000701359 Jy ! Component: 350 - total flux cleaned = -0.000736254 Jy ! Component: 400 - total flux cleaned = -0.000820029 Jy ! Component: 450 - total flux cleaned = -0.00090076 Jy ! Component: 500 - total flux cleaned = -0.000962869 Jy ! Component: 550 - total flux cleaned = -0.00103866 Jy ! Component: 600 - total flux cleaned = -0.00109785 Jy ! Component: 650 - total flux cleaned = -0.00115525 Jy ! Component: 700 - total flux cleaned = -0.00119708 Jy ! Component: 750 - total flux cleaned = -0.00122451 Jy ! Component: 800 - total flux cleaned = -0.00130439 Jy ! Component: 850 - total flux cleaned = -0.00138245 Jy ! Component: 900 - total flux cleaned = -0.00143341 Jy ! Component: 950 - total flux cleaned = -0.00154586 Jy ! Component: 1000 - total flux cleaned = -0.0016559 Jy ! Component: 1050 - total flux cleaned = -0.00176367 Jy ! Component: 1100 - total flux cleaned = -0.00185748 Jy ! Component: 1150 - total flux cleaned = -0.00194985 Jy ! Component: 1200 - total flux cleaned = -0.00200682 Jy ! Component: 1250 - total flux cleaned = -0.00202938 Jy ! Component: 1300 - total flux cleaned = -0.00207345 Jy ! Component: 1350 - total flux cleaned = -0.00208433 Jy ! Component: 1400 - total flux cleaned = -0.00211669 Jy ! Component: 1450 - total flux cleaned = -0.00214852 Jy ! Component: 1500 - total flux cleaned = -0.00214852 Jy ! Component: 1550 - total flux cleaned = -0.00214871 Jy ! Component: 1600 - total flux cleaned = -0.00216925 Jy ! Component: 1650 - total flux cleaned = -0.00219962 Jy ! Component: 1700 - total flux cleaned = -0.00221955 Jy ! Component: 1750 - total flux cleaned = -0.0022096 Jy ! Component: 1800 - total flux cleaned = -0.00221947 Jy ! Component: 1850 - total flux cleaned = -0.0022293 Jy ! Component: 1900 - total flux cleaned = -0.00224876 Jy ! Component: 1950 - total flux cleaned = -0.00223913 Jy ! Component: 2000 - total flux cleaned = -0.00223914 Jy ! Component: 2050 - total flux cleaned = -0.00223915 Jy ! Component: 2100 - total flux cleaned = -0.00222956 Jy ! Component: 2150 - total flux cleaned = -0.0022106 Jy ! Component: 2200 - total flux cleaned = -0.00219168 Jy ! Component: 2250 - total flux cleaned = -0.0021634 Jy ! Component: 2300 - total flux cleaned = -0.00217279 Jy ! Component: 2350 - total flux cleaned = -0.00216341 Jy ! Component: 2400 - total flux cleaned = -0.0021541 Jy ! Component: 2450 - total flux cleaned = -0.00214474 Jy ! Component: 2500 - total flux cleaned = -0.00215405 Jy ! Component: 2550 - total flux cleaned = -0.00216333 Jy ! Component: 2600 - total flux cleaned = -0.00214475 Jy ! Component: 2650 - total flux cleaned = -0.00215405 Jy ! Component: 2700 - total flux cleaned = -0.00213545 Jy ! Component: 2750 - total flux cleaned = -0.00211701 Jy ! Component: 2800 - total flux cleaned = -0.0021263 Jy ! Component: 2850 - total flux cleaned = -0.00213558 Jy ! Component: 2900 - total flux cleaned = -0.00213555 Jy ! Component: 2950 - total flux cleaned = -0.0021079 Jy ! Component: 3000 - total flux cleaned = -0.00209865 Jy ! Component: 3050 - total flux cleaned = -0.00208024 Jy ! Component: 3100 - total flux cleaned = -0.00206179 Jy ! Component: 3150 - total flux cleaned = -0.00203411 Jy ! Component: 3200 - total flux cleaned = -0.00202488 Jy ! Component: 3250 - total flux cleaned = -0.00200642 Jy ! Component: 3300 - total flux cleaned = -0.00197879 Jy ! Component: 3350 - total flux cleaned = -0.00195108 Jy ! Component: 3400 - total flux cleaned = -0.001914 Jy ! Component: 3450 - total flux cleaned = -0.00192329 Jy ! Component: 3500 - total flux cleaned = -0.00188618 Jy ! Component: 3550 - total flux cleaned = -0.00191407 Jy ! Component: 3600 - total flux cleaned = -0.00187683 Jy ! Component: 3650 - total flux cleaned = -0.00184877 Jy ! Component: 3700 - total flux cleaned = -0.00183942 Jy ! Component: 3750 - total flux cleaned = -0.00183938 Jy ! Component: 3800 - total flux cleaned = -0.00182068 Jy ! Component: 3850 - total flux cleaned = -0.00181124 Jy ! Component: 3900 - total flux cleaned = -0.00181123 Jy ! Component: 3950 - total flux cleaned = -0.00181124 Jy ! Component: 4000 - total flux cleaned = -0.00178284 Jy ! Component: 4050 - total flux cleaned = -0.00178278 Jy ! Total flux subtracted in 4096 components = -0.0017923 Jy ! Clean residual min=-0.000557 max=0.000654 Jy/beam ! Clean residual mean=-0.000004 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.0374761 Jy keep ! Adding 220 model components to the UV plane model. ! The established model now contains 279 components and 0.0374761 Jy ![Exited script file: muppet] wmap "J1350+6132_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 11.16 at -49.93 degrees (North through East) ! Clean map min=-0.0014941 max=0.035205 Jy/beam ! Writing clean map to FITS file: J1350+6132_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0352054 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157966 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.3461 1.3461 2.6922 5.3844 10.7688 21.5376 43.0752 86.1504 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.678 x 11.16 at -49.93 degrees (North through East) ! Clean map min=-0.0014941 max=0.035205 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1350+6132_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:56:00 2017