! Started logfile: J1349-1132_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:49 2017 obs J1349-1132_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1349-1132_S_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.680556 visibilities/baseline/integration-bin. ! Found source: J1349-1132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 7448 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1349-1132_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.758965Jy sigma=0.009191 ! Fit after self-cal, rms=0.701076Jy sigma=0.008538 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.726 mas, bmaj=5.779 mas, bpa=0.1966 degrees ! Estimated noise=1130.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230158 Jy ! Component: 100 - total flux cleaned = 0.280919 Jy ! Total flux subtracted in 100 components = 0.280919 Jy ! Clean residual min=-0.012652 max=0.019507 Jy/beam ! Clean residual mean=0.000036 rms=0.003178 Jy/beam ! Combined flux in latest and established models = 0.280919 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.280919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095682Jy sigma=0.001029 ! Fit after self-cal, rms=0.095721Jy sigma=0.001029 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=6.766 mas, bpa=-0.002604 degrees ! Estimated noise=719.632 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236306 Jy ! Component: 100 - total flux cleaned = 0.0377637 Jy ! Component: 150 - total flux cleaned = 0.0474606 Jy ! Component: 200 - total flux cleaned = 0.0544372 Jy ! Total flux subtracted in 200 components = 0.0544372 Jy ! Clean residual min=-0.006864 max=0.010438 Jy/beam ! Clean residual mean=0.000022 rms=0.001876 Jy/beam ! Combined flux in latest and established models = 0.335356 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.335356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088212Jy sigma=0.000954 ! Fit after self-cal, rms=0.087755Jy sigma=0.000952 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.82 KP 1.00* LA 1.02 ! MK 1.00 NL 0.99 OV 0.99 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 KP 1.00* LA 0.99 ! MK 1.01 NL 1.06 OV 1.00 PT 0.97 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.10 KP 1.00* LA 0.81 ! MK 1.02 NL 1.03 OV 0.95 PT 0.95 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 KP 1.00* LA 0.88 ! MK 0.98 NL 1.09 OV 0.97 PT 0.99 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.087755Jy sigma=0.000952 ! Fit after self-cal, rms=0.080742Jy sigma=0.000894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.281 mas, bmaj=6.824 mas, bpa=0.1515 degrees ! Estimated noise=713.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000630119 Jy ! Component: 100 - total flux cleaned = 0.000212461 Jy ! Component: 150 - total flux cleaned = -0.00018685 Jy ! Component: 200 - total flux cleaned = -0.00045682 Jy ! Total flux subtracted in 200 components = -0.00045682 Jy ! Clean residual min=-0.003183 max=0.003305 Jy/beam ! Clean residual mean=-0.000005 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.334899 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.334899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080572Jy sigma=0.000892 ! Fit after self-cal, rms=0.080381Jy sigma=0.000892 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080381Jy sigma=0.000892 ! Fit after self-cal, rms=0.079726Jy sigma=0.000887 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.274 mas, bmaj=6.811 mas, bpa=0.02931 degrees ! Estimated noise=712.639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231248 Jy ! Component: 100 - total flux cleaned = -0.000493563 Jy ! Component: 150 - total flux cleaned = -0.000755607 Jy ! Component: 200 - total flux cleaned = -0.00104977 Jy ! Total flux subtracted in 200 components = -0.00104977 Jy ! Clean residual min=-0.002450 max=0.002850 Jy/beam ! Clean residual mean=-0.000003 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.33385 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.33385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079663Jy sigma=0.000886 ! Fit after self-cal, rms=0.079641Jy sigma=0.000886 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (111.5, -76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137384 Jy ! Component: 100 - total flux cleaned = 0.00156205 Jy ! Component: 150 - total flux cleaned = 0.00138732 Jy ! Component: 200 - total flux cleaned = 0.0011982 Jy ! Total flux subtracted in 200 components = 0.0011982 Jy ! Clean residual min=-0.002449 max=0.002259 Jy/beam ! Clean residual mean=-0.000003 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.335048 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.335048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079546Jy sigma=0.000885 ! Fit after self-cal, rms=0.079537Jy sigma=0.000885 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079537Jy sigma=0.000885 ! Fit after self-cal, rms=0.079339Jy sigma=0.000885 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=6.809 mas, bpa=0.02029 degrees ! Estimated noise=711.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151821 Jy ! Component: 100 - total flux cleaned = 0.000268424 Jy ! Component: 150 - total flux cleaned = 0.00016775 Jy ! Component: 200 - total flux cleaned = 1.12962e-05 Jy ! Total flux subtracted in 200 components = 1.12962e-05 Jy ! Clean residual min=-0.002428 max=0.002197 Jy/beam ! Clean residual mean=-0.000003 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.335059 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 100 components and 0.335059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079306Jy sigma=0.000884 ! Fit after self-cal, rms=0.079297Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.09765e-05 Jy ! Component: 100 - total flux cleaned = -0.000145296 Jy ! Component: 150 - total flux cleaned = -0.000253414 Jy ! Component: 200 - total flux cleaned = -0.000379381 Jy ! Total flux subtracted in 200 components = -0.000379381 Jy ! Clean residual min=-0.002385 max=0.002150 Jy/beam ! Clean residual mean=-0.000002 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.33468 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 110 components and 0.33468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079279Jy sigma=0.000884 ! Fit after self-cal, rms=0.079279Jy sigma=0.000884 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079279Jy sigma=0.000884 ! Fit after self-cal, rms=0.079204Jy sigma=0.000884 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.144 mas, bmaj=13.57 mas, bpa=10.02 degrees ! Estimated noise=863.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.90834e-05 Jy ! Component: 100 - total flux cleaned = -7.71675e-05 Jy ! Component: 150 - total flux cleaned = -0.000119158 Jy ! Component: 200 - total flux cleaned = -0.000175227 Jy ! Total flux subtracted in 200 components = -0.000175227 Jy ! Clean residual min=-0.002605 max=0.002440 Jy/beam ! Clean residual mean=-0.000003 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.334504 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 125 components and 0.334505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079201Jy sigma=0.000884 ! Fit after self-cal, rms=0.079195Jy sigma=0.000884 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53245e-06 Jy ! Component: 100 - total flux cleaned = -2.56102e-05 Jy ! Component: 150 - total flux cleaned = -4.21844e-05 Jy ! Component: 200 - total flux cleaned = -7.15441e-05 Jy ! Total flux subtracted in 200 components = -7.15441e-05 Jy ! Clean residual min=-0.002579 max=0.002395 Jy/beam ! Clean residual mean=-0.000002 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.334433 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 131 components and 0.334433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079195Jy sigma=0.000884 ! Fit after self-cal, rms=0.079195Jy sigma=0.000884 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=6.81 mas, bpa=0.04247 degrees ! Estimated noise=711.498 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 6.81 at 0.04247 degrees (North through East) ! Clean map min=-0.0021965 max=0.29323 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.715 mas, bmaj=5.821 mas, bpa=0.2339 degrees ! Estimated noise=1114.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.226877 Jy ! Component: 100 - total flux cleaned = 0.276926 Jy ! Component: 150 - total flux cleaned = 0.295401 Jy ! Component: 200 - total flux cleaned = 0.306148 Jy ! Total flux subtracted in 200 components = 0.306148 Jy ! Clean residual min=-0.006082 max=0.006959 Jy/beam ! Clean residual mean=0.000011 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.306148 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.306148 Jy ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=6.81 mas, bpa=0.04247 degrees ! Estimated noise=711.498 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00901693 Jy ! Component: 100 - total flux cleaned = 0.0145057 Jy ! Component: 150 - total flux cleaned = 0.0184115 Jy ! Component: 200 - total flux cleaned = 0.0206915 Jy ! Total flux subtracted in 200 components = 0.0206915 Jy ! Clean residual min=-0.002767 max=0.002802 Jy/beam ! Clean residual mean=0.000005 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.32684 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 39 components and 0.32684 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.144 mas, bmaj=13.57 mas, bpa=10.02 degrees ! Estimated noise=863.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295996 Jy ! Component: 100 - total flux cleaned = 0.0048986 Jy ! Component: 150 - total flux cleaned = 0.00580248 Jy ! Component: 200 - total flux cleaned = 0.00636889 Jy ! Total flux subtracted in 200 components = 0.00636889 Jy ! Clean residual min=-0.002766 max=0.002180 Jy/beam ! Clean residual mean=0.000001 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 0.333209 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.23776e-05 Jy ! Component: 100 - total flux cleaned = 7.31429e-05 Jy ! Component: 150 - total flux cleaned = 0.000103793 Jy ! Component: 200 - total flux cleaned = 0.000131626 Jy ! Total flux subtracted in 200 components = 0.000131626 Jy ! Clean residual min=-0.002656 max=0.002105 Jy/beam ! Clean residual mean=0.000001 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.33334 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 72 components and 0.33334 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=6.81 mas, bpa=0.04247 degrees ! Estimated noise=711.498 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027758 Jy ! Component: 100 - total flux cleaned = -0.000278888 Jy ! Component: 150 - total flux cleaned = -0.000327338 Jy ! Component: 200 - total flux cleaned = -0.000373757 Jy ! Total flux subtracted in 200 components = -0.000373757 Jy ! Clean residual min=-0.002397 max=0.002539 Jy/beam ! Clean residual mean=-0.000000 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.332967 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 91 components and 0.332967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079285Jy sigma=0.000885 ! Fit after self-cal, rms=0.079301Jy sigma=0.000885 wmodel J1349-1132_S_2014_01_04_pus_map.mod ! Writing 91 model components to file: J1349-1132_S_2014_01_04_pus_map.mod wobs J1349-1132_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1349-1132_S_2014_01_04_pus_uvs.fits wwins J1349-1132_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1349-1132_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000589779 Jy ! Component: 100 - total flux cleaned = -0.000958071 Jy ! Component: 150 - total flux cleaned = -0.00126113 Jy ! Component: 200 - total flux cleaned = -0.00161238 Jy ! Component: 250 - total flux cleaned = -0.00191356 Jy ! Component: 300 - total flux cleaned = -0.00223459 Jy ! Component: 350 - total flux cleaned = -0.00257538 Jy ! Component: 400 - total flux cleaned = -0.00281559 Jy ! Component: 450 - total flux cleaned = -0.00302072 Jy ! Component: 500 - total flux cleaned = -0.0032768 Jy ! Component: 550 - total flux cleaned = -0.00347026 Jy ! Component: 600 - total flux cleaned = -0.0036862 Jy ! Component: 650 - total flux cleaned = -0.00387053 Jy ! Component: 700 - total flux cleaned = -0.00410315 Jy ! Component: 750 - total flux cleaned = -0.00433067 Jy ! Component: 800 - total flux cleaned = -0.00457685 Jy ! Component: 850 - total flux cleaned = -0.00469719 Jy ! Component: 900 - total flux cleaned = -0.00481528 Jy ! Component: 950 - total flux cleaned = -0.00490786 Jy ! Component: 1000 - total flux cleaned = -0.0049311 Jy ! Component: 1050 - total flux cleaned = -0.00504225 Jy ! Component: 1100 - total flux cleaned = -0.00510772 Jy ! Component: 1150 - total flux cleaned = -0.00515051 Jy ! Component: 1200 - total flux cleaned = -0.0052141 Jy ! Component: 1250 - total flux cleaned = -0.0052766 Jy ! Component: 1300 - total flux cleaned = -0.00537875 Jy ! Component: 1350 - total flux cleaned = -0.00541902 Jy ! Component: 1400 - total flux cleaned = -0.00551752 Jy ! Component: 1450 - total flux cleaned = -0.00551767 Jy ! Component: 1500 - total flux cleaned = -0.00557471 Jy ! Component: 1550 - total flux cleaned = -0.00559344 Jy ! Component: 1600 - total flux cleaned = -0.00564906 Jy ! Component: 1650 - total flux cleaned = -0.00570385 Jy ! Component: 1700 - total flux cleaned = -0.00570381 Jy ! Component: 1750 - total flux cleaned = -0.00572153 Jy ! Component: 1800 - total flux cleaned = -0.00580909 Jy ! Component: 1850 - total flux cleaned = -0.0058435 Jy ! Component: 1900 - total flux cleaned = -0.00586082 Jy ! Component: 1950 - total flux cleaned = -0.00594457 Jy ! Component: 2000 - total flux cleaned = -0.00605989 Jy ! Component: 2050 - total flux cleaned = -0.00606002 Jy ! Component: 2100 - total flux cleaned = -0.00614062 Jy ! Component: 2150 - total flux cleaned = -0.00618846 Jy ! Component: 2200 - total flux cleaned = -0.00625114 Jy ! Component: 2250 - total flux cleaned = -0.00625102 Jy ! Component: 2300 - total flux cleaned = -0.00631233 Jy ! Component: 2350 - total flux cleaned = -0.00634292 Jy ! Component: 2400 - total flux cleaned = -0.00638814 Jy ! Component: 2450 - total flux cleaned = -0.00640317 Jy ! Component: 2500 - total flux cleaned = -0.00647714 Jy ! Component: 2550 - total flux cleaned = -0.00650622 Jy ! Component: 2600 - total flux cleaned = -0.00650624 Jy ! Component: 2650 - total flux cleaned = -0.00652057 Jy ! Component: 2700 - total flux cleaned = -0.00656346 Jy ! Component: 2750 - total flux cleaned = -0.00659166 Jy ! Component: 2800 - total flux cleaned = -0.00667557 Jy ! Component: 2850 - total flux cleaned = -0.00668925 Jy ! Component: 2900 - total flux cleaned = -0.00670295 Jy ! Component: 2950 - total flux cleaned = -0.00670295 Jy ! Component: 3000 - total flux cleaned = -0.00674362 Jy ! Component: 3050 - total flux cleaned = -0.00673022 Jy ! Component: 3100 - total flux cleaned = -0.00675698 Jy ! Component: 3150 - total flux cleaned = -0.00677014 Jy ! Component: 3200 - total flux cleaned = -0.00677012 Jy ! Component: 3250 - total flux cleaned = -0.00678301 Jy ! Component: 3300 - total flux cleaned = -0.00678311 Jy ! Component: 3350 - total flux cleaned = -0.00677028 Jy ! Component: 3400 - total flux cleaned = -0.00678301 Jy ! Component: 3450 - total flux cleaned = -0.00679574 Jy ! Component: 3500 - total flux cleaned = -0.00687119 Jy ! Component: 3550 - total flux cleaned = -0.00683359 Jy ! Component: 3600 - total flux cleaned = -0.00687087 Jy ! Component: 3650 - total flux cleaned = -0.00684614 Jy ! Component: 3700 - total flux cleaned = -0.00693185 Jy ! Component: 3750 - total flux cleaned = -0.00688312 Jy ! Component: 3800 - total flux cleaned = -0.00693156 Jy ! Component: 3850 - total flux cleaned = -0.00695563 Jy ! Component: 3900 - total flux cleaned = -0.00697957 Jy ! Component: 3950 - total flux cleaned = -0.0070389 Jy ! Component: 4000 - total flux cleaned = -0.00705068 Jy ! Component: 4050 - total flux cleaned = -0.007039 Jy ! Total flux subtracted in 4096 components = -0.00705071 Jy ! Clean residual min=-0.000645 max=0.000726 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.325916 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 333 components and 0.325916 Jy ![Exited script file: muppet] wmap "J1349-1132_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 6.81 at 0.04247 degrees (North through East) ! Clean map min=-0.0017822 max=0.2935 Jy/beam ! Writing clean map to FITS file: J1349-1132_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.293497 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000197668 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.202048 0.202048 0.404095 0.80819 1.61638 3.23276 6.46552 12.931 25.8621 51.7242 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.293 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 6.81 at 0.04247 degrees (North through East) ! Clean map min=-0.0017822 max=0.2935 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1349-1132_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:28:53 2017