! Started logfile: J1347-3750_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:26:10 2017 obs J1347-3750_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1347-3750_S_2015_01_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.745224 visibilities/baseline/integration-bin. ! Found source: J1347-3750 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 15292 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1347-3750_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.989985Jy sigma=0.007122 ! Fit after self-cal, rms=0.924370Jy sigma=0.006722 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.223 mas, bmaj=6.119 mas, bpa=-2.599 degrees ! Estimated noise=1490.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655843 Jy ! Component: 100 - total flux cleaned = 0.0806729 Jy ! Total flux subtracted in 100 components = 0.0806729 Jy ! Clean residual min=-0.005303 max=0.006792 Jy/beam ! Clean residual mean=-0.000003 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 0.0806729 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0806729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172852Jy sigma=0.000773 ! Fit after self-cal, rms=0.172615Jy sigma=0.000771 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=7.226 mas, bpa=-2.28 degrees ! Estimated noise=870.544 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0092683 Jy ! Component: 100 - total flux cleaned = 0.0137564 Jy ! Component: 150 - total flux cleaned = 0.0162067 Jy ! Component: 200 - total flux cleaned = 0.0175751 Jy ! Total flux subtracted in 200 components = 0.0175751 Jy ! Clean residual min=-0.003713 max=0.004628 Jy/beam ! Clean residual mean=0.000001 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.0982479 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.0982479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171910Jy sigma=0.000767 ! Fit after self-cal, rms=0.171851Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.65 HN 1.00* KP 1.11 ! LA 0.98 MK 1.02 NL 1.23 OV 0.96 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.76 HN 1.39 KP 1.03 ! LA 0.92 MK 0.98 NL 1.34 OV 0.94 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.73 HN 1.26 KP 0.88 ! LA 0.80 MK 1.04 NL 1.15 OV 0.96 ! PT 0.97 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.97 HN 1.39 KP 0.81 ! LA 0.81 MK 1.04 NL 1.08 OV 0.98 ! PT 1.05 SC 0.96 ! ! ! Fit before self-cal, rms=0.171851Jy sigma=0.000767 ! Fit after self-cal, rms=0.161273Jy sigma=0.000760 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=7.255 mas, bpa=-1.881 degrees ! Estimated noise=874.764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.0626e-05 Jy ! Component: 100 - total flux cleaned = -6.9222e-05 Jy ! Component: 150 - total flux cleaned = -8.64616e-05 Jy ! Component: 200 - total flux cleaned = -0.000101832 Jy ! Total flux subtracted in 200 components = -0.000101832 Jy ! Clean residual min=-0.002705 max=0.002503 Jy/beam ! Clean residual mean=0.000005 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0981461 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.0981461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161267Jy sigma=0.000760 ! Fit after self-cal, rms=0.161440Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161440Jy sigma=0.000759 ! Fit after self-cal, rms=0.161966Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.286 mas, bpa=-1.88 degrees ! Estimated noise=877.848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69513e-05 Jy ! Component: 100 - total flux cleaned = 5.40826e-05 Jy ! Component: 150 - total flux cleaned = 8.63092e-05 Jy ! Component: 200 - total flux cleaned = 0.00010071 Jy ! Total flux subtracted in 200 components = 0.00010071 Jy ! Clean residual min=-0.002683 max=0.002671 Jy/beam ! Clean residual mean=0.000009 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.0982468 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0982468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161959Jy sigma=0.000759 ! Fit after self-cal, rms=0.162002Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-48, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209974 Jy ! Component: 100 - total flux cleaned = 0.00210854 Jy ! Component: 150 - total flux cleaned = 0.00198982 Jy ! Component: 200 - total flux cleaned = 0.00188563 Jy ! Total flux subtracted in 200 components = 0.00188563 Jy ! Clean residual min=-0.002632 max=0.002373 Jy/beam ! Clean residual mean=0.000006 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.100132 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.100132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161955Jy sigma=0.000758 ! Fit after self-cal, rms=0.161951Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161951Jy sigma=0.000758 ! Fit after self-cal, rms=0.159693Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.315 mas, bpa=-1.947 degrees ! Estimated noise=874.836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00056958 Jy ! Component: 100 - total flux cleaned = 0.000459113 Jy ! Component: 150 - total flux cleaned = 0.000361914 Jy ! Component: 200 - total flux cleaned = 0.000273831 Jy ! Total flux subtracted in 200 components = 0.000273831 Jy ! Clean residual min=-0.002659 max=0.002332 Jy/beam ! Clean residual mean=0.000004 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.100406 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.100406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159669Jy sigma=0.000758 ! Fit after self-cal, rms=0.159669Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000372335 Jy ! Component: 100 - total flux cleaned = 0.000309051 Jy ! Component: 150 - total flux cleaned = 0.000251785 Jy ! Component: 200 - total flux cleaned = 0.000225271 Jy ! Total flux subtracted in 200 components = 0.000225271 Jy ! Clean residual min=-0.002568 max=0.002309 Jy/beam ! Clean residual mean=0.000004 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.100632 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.100632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159650Jy sigma=0.000758 ! Fit after self-cal, rms=0.159658Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159658Jy sigma=0.000758 ! Fit after self-cal, rms=0.158941Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=23.48 mas, bpa=1.061 degrees ! Estimated noise=1180.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000294279 Jy ! Component: 100 - total flux cleaned = -0.000319361 Jy ! Component: 150 - total flux cleaned = -0.00028468 Jy ! Component: 200 - total flux cleaned = -0.000269718 Jy ! Total flux subtracted in 200 components = -0.000269718 Jy ! Clean residual min=-0.002562 max=0.002588 Jy/beam ! Clean residual mean=0.000010 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.100362 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 94 components and 0.100362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158934Jy sigma=0.000758 ! Fit after self-cal, rms=0.158920Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.73037e-05 Jy ! Component: 100 - total flux cleaned = 7.22757e-05 Jy ! Component: 150 - total flux cleaned = 8.77942e-05 Jy ! Component: 200 - total flux cleaned = 8.71592e-05 Jy ! Total flux subtracted in 200 components = 8.71592e-05 Jy ! Clean residual min=-0.002541 max=0.002603 Jy/beam ! Clean residual mean=0.000011 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.100449 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 99 components and 0.100449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158914Jy sigma=0.000758 ! Fit after self-cal, rms=0.158909Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.331 mas, bpa=-1.985 degrees ! Estimated noise=873.206 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.331 at -1.985 degrees (North through East) ! Clean map min=-0.0023994 max=0.084853 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=6.114 mas, bpa=-2.437 degrees ! Estimated noise=1515.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660207 Jy ! Component: 100 - total flux cleaned = 0.0820999 Jy ! Component: 150 - total flux cleaned = 0.0891149 Jy ! Component: 200 - total flux cleaned = 0.0935031 Jy ! Total flux subtracted in 200 components = 0.0935031 Jy ! Clean residual min=-0.004042 max=0.003974 Jy/beam ! Clean residual mean=-0.000002 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.0935031 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0935031 Jy ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.331 mas, bpa=-1.985 degrees ! Estimated noise=873.206 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032838 Jy ! Component: 100 - total flux cleaned = 0.00485114 Jy ! Component: 150 - total flux cleaned = 0.0051097 Jy ! Component: 200 - total flux cleaned = 0.00528059 Jy ! Total flux subtracted in 200 components = 0.00528059 Jy ! Clean residual min=-0.002880 max=0.002300 Jy/beam ! Clean residual mean=0.000003 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.0987837 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 54 components and 0.0987837 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.97 mas, bmaj=23.48 mas, bpa=1.061 degrees ! Estimated noise=1180.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798814 Jy ! Component: 100 - total flux cleaned = 0.00109433 Jy ! Component: 150 - total flux cleaned = 0.00116236 Jy ! Component: 200 - total flux cleaned = 0.00125084 Jy ! Total flux subtracted in 200 components = 0.00125084 Jy ! Clean residual min=-0.002544 max=0.002631 Jy/beam ! Clean residual mean=0.000010 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.100035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.02242e-05 Jy ! Component: 100 - total flux cleaned = 7.25855e-05 Jy ! Component: 150 - total flux cleaned = 9.27147e-05 Jy ! Component: 200 - total flux cleaned = 9.23636e-05 Jy ! Total flux subtracted in 200 components = 9.23636e-05 Jy ! Clean residual min=-0.002504 max=0.002621 Jy/beam ! Clean residual mean=0.000011 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.100127 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 77 components and 0.100127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=7.331 mas, bpa=-1.985 degrees ! Estimated noise=873.206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000502942 Jy ! Component: 100 - total flux cleaned = -0.00053722 Jy ! Component: 150 - total flux cleaned = -0.000600198 Jy ! Component: 200 - total flux cleaned = -0.000661047 Jy ! Total flux subtracted in 200 components = -0.000661047 Jy ! Clean residual min=-0.002596 max=0.002324 Jy/beam ! Clean residual mean=0.000004 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0994658 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.0994658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158899Jy sigma=0.000758 ! Fit after self-cal, rms=0.158878Jy sigma=0.000758 wmodel J1347-3750_S_2015_01_23_pus_map.mod ! Writing 89 model components to file: J1347-3750_S_2015_01_23_pus_map.mod wobs J1347-3750_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1347-3750_S_2015_01_23_pus_uvs.fits wwins J1347-3750_S_2015_01_23_pus_map.win ! wwins: Wrote 2 windows to J1347-3750_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000612622 Jy ! Component: 100 - total flux cleaned = -0.000863822 Jy ! Component: 150 - total flux cleaned = -0.00102396 Jy ! Component: 200 - total flux cleaned = -0.00109976 Jy ! Component: 250 - total flux cleaned = -0.00113672 Jy ! Component: 300 - total flux cleaned = -0.00124481 Jy ! Component: 350 - total flux cleaned = -0.00131389 Jy ! Component: 400 - total flux cleaned = -0.00131354 Jy ! Component: 450 - total flux cleaned = -0.00137987 Jy ! Component: 500 - total flux cleaned = -0.00144482 Jy ! Component: 550 - total flux cleaned = -0.00154035 Jy ! Component: 600 - total flux cleaned = -0.00154066 Jy ! Component: 650 - total flux cleaned = -0.00160172 Jy ! Component: 700 - total flux cleaned = -0.00154199 Jy ! Component: 750 - total flux cleaned = -0.00148334 Jy ! Component: 800 - total flux cleaned = -0.00148346 Jy ! Component: 850 - total flux cleaned = -0.00136935 Jy ! Component: 900 - total flux cleaned = -0.0013415 Jy ! Component: 950 - total flux cleaned = -0.00128665 Jy ! Component: 1000 - total flux cleaned = -0.00125938 Jy ! Component: 1050 - total flux cleaned = -0.0011785 Jy ! Component: 1100 - total flux cleaned = -0.00112522 Jy ! Component: 1150 - total flux cleaned = -0.00107291 Jy ! Component: 1200 - total flux cleaned = -0.000995435 Jy ! Component: 1250 - total flux cleaned = -0.000969807 Jy ! Component: 1300 - total flux cleaned = -0.000919123 Jy ! Component: 1350 - total flux cleaned = -0.000894297 Jy ! Component: 1400 - total flux cleaned = -0.000820068 Jy ! Component: 1450 - total flux cleaned = -0.000747214 Jy ! Component: 1500 - total flux cleaned = -0.000699191 Jy ! Component: 1550 - total flux cleaned = -0.000580398 Jy ! Component: 1600 - total flux cleaned = -0.000580498 Jy ! Component: 1650 - total flux cleaned = -0.000440471 Jy ! Component: 1700 - total flux cleaned = -0.000510272 Jy ! Component: 1750 - total flux cleaned = -0.000395628 Jy ! Component: 1800 - total flux cleaned = -0.000305048 Jy ! Component: 1850 - total flux cleaned = -0.00030523 Jy ! Component: 1900 - total flux cleaned = -0.000282734 Jy ! Component: 1950 - total flux cleaned = -0.000172361 Jy ! Component: 2000 - total flux cleaned = -0.000128785 Jy ! Component: 2050 - total flux cleaned = -0.000107022 Jy ! Component: 2100 - total flux cleaned = -8.57373e-05 Jy ! Component: 2150 - total flux cleaned = -0.000128337 Jy ! Component: 2200 - total flux cleaned = -6.48949e-05 Jy ! Component: 2250 - total flux cleaned = -8.59386e-05 Jy ! Component: 2300 - total flux cleaned = -8.57051e-05 Jy ! Component: 2350 - total flux cleaned = -8.61e-05 Jy ! Component: 2400 - total flux cleaned = -0.000106551 Jy ! Component: 2450 - total flux cleaned = -0.000126848 Jy ! Component: 2500 - total flux cleaned = -0.000207312 Jy ! Component: 2550 - total flux cleaned = -0.000227484 Jy ! Component: 2600 - total flux cleaned = -0.000267305 Jy ! Component: 2650 - total flux cleaned = -0.000267548 Jy ! Component: 2700 - total flux cleaned = -0.000287248 Jy ! Component: 2750 - total flux cleaned = -0.000306791 Jy ! Component: 2800 - total flux cleaned = -0.000403303 Jy ! Component: 2850 - total flux cleaned = -0.000384127 Jy ! Component: 2900 - total flux cleaned = -0.00046025 Jy ! Component: 2950 - total flux cleaned = -0.000460001 Jy ! Component: 3000 - total flux cleaned = -0.000497491 Jy ! Component: 3050 - total flux cleaned = -0.000553401 Jy ! Component: 3100 - total flux cleaned = -0.000553364 Jy ! Component: 3150 - total flux cleaned = -0.000590116 Jy ! Component: 3200 - total flux cleaned = -0.000608317 Jy ! Component: 3250 - total flux cleaned = -0.000608222 Jy ! Component: 3300 - total flux cleaned = -0.000680193 Jy ! Component: 3350 - total flux cleaned = -0.000680342 Jy ! Component: 3400 - total flux cleaned = -0.00075134 Jy ! Component: 3450 - total flux cleaned = -0.000804305 Jy ! Component: 3500 - total flux cleaned = -0.000821966 Jy ! Component: 3550 - total flux cleaned = -0.000978999 Jy ! Component: 3600 - total flux cleaned = -0.000996188 Jy ! Component: 3650 - total flux cleaned = -0.00103083 Jy ! Component: 3700 - total flux cleaned = -0.0010994 Jy ! Component: 3750 - total flux cleaned = -0.00116747 Jy ! Component: 3800 - total flux cleaned = -0.00125211 Jy ! Component: 3850 - total flux cleaned = -0.00126882 Jy ! Component: 3900 - total flux cleaned = -0.00128575 Jy ! Component: 3950 - total flux cleaned = -0.00138568 Jy ! Component: 4000 - total flux cleaned = -0.00146854 Jy ! Component: 4050 - total flux cleaned = -0.00145236 Jy ! Total flux subtracted in 4096 components = -0.00155067 Jy ! Clean residual min=-0.001137 max=0.001060 Jy/beam ! Clean residual mean=-0.000003 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.0979152 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 361 components and 0.0979151 Jy ![Exited script file: muppet] wmap "J1347-3750_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.331 at -1.985 degrees (North through East) ! Clean map min=-0.0021515 max=0.086019 Jy/beam ! Writing clean map to FITS file: J1347-3750_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0860191 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292134 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.01885 1.01885 2.03769 4.07539 8.15077 16.3015 32.6031 65.2062 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.086 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.79 x 7.331 at -1.985 degrees (North through East) ! Clean map min=-0.0021515 max=0.086019 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1347-3750_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:26:14 2017