! Started logfile: J1343+6602_S_2015_01_23_pus_uvs.log on Mon Jan 2 19:26:04 2017 obs J1343+6602_S_2015_01_23_pus_uva.fits ! Reading UV FITS file: J1343+6602_S_2015_01_23_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.748659 visibilities/baseline/integration-bin. ! Found source: J1343+6602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 3908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1343+6602_S_2015_01_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.746593Jy sigma=0.008505 ! Fit after self-cal, rms=0.741115Jy sigma=0.008451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=3.752 mas, bpa=71.04 degrees ! Estimated noise=1325.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207574 Jy ! Component: 100 - total flux cleaned = 0.258035 Jy ! Total flux subtracted in 100 components = 0.258035 Jy ! Clean residual min=-0.013764 max=0.018517 Jy/beam ! Clean residual mean=-0.000071 rms=0.004228 Jy/beam ! Combined flux in latest and established models = 0.258035 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.258035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176758Jy sigma=0.001814 ! Fit after self-cal, rms=0.176766Jy sigma=0.001814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.657 mas, bmaj=4.39 mas, bpa=75.72 degrees ! Estimated noise=1045.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213511 Jy ! Component: 100 - total flux cleaned = 0.030607 Jy ! Component: 150 - total flux cleaned = 0.0321077 Jy ! Component: 200 - total flux cleaned = 0.0326013 Jy ! Total flux subtracted in 200 components = 0.0326013 Jy ! Clean residual min=-0.011587 max=0.013152 Jy/beam ! Clean residual mean=-0.000101 rms=0.003473 Jy/beam ! Combined flux in latest and established models = 0.290636 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.290636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173086Jy sigma=0.001793 ! Fit after self-cal, rms=0.173099Jy sigma=0.001793 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.69 HN 0.99 KP 1.18 ! LA 1.16 MK 0.79 NL 1.05 OV 1.02 ! PT 0.83 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.79 HN 1.02 KP 1.00 ! LA 1.13 MK 1.01 NL 1.00 OV 1.02 ! PT 1.00 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.91 HN 1.02 KP 0.87 ! LA 0.86 MK 1.02 NL 1.27 OV 0.94 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.73 HN 0.99 KP 0.81 ! LA 0.97 MK 1.01 NL 1.03 OV 0.99 ! PT 1.04 SC 1.03 ! ! ! Fit before self-cal, rms=0.173099Jy sigma=0.001793 ! Fit after self-cal, rms=0.129822Jy sigma=0.001746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=4.385 mas, bpa=76.49 degrees ! Estimated noise=1041.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129378 Jy ! Component: 100 - total flux cleaned = -0.00119169 Jy ! Component: 150 - total flux cleaned = -0.0011952 Jy ! Component: 200 - total flux cleaned = -0.00110671 Jy ! Total flux subtracted in 200 components = -0.00110671 Jy ! Clean residual min=-0.010491 max=0.012613 Jy/beam ! Clean residual mean=-0.000081 rms=0.003029 Jy/beam ! Combined flux in latest and established models = 0.289529 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.289529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129690Jy sigma=0.001745 ! Fit after self-cal, rms=0.129834Jy sigma=0.001744 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129834Jy sigma=0.001744 ! Fit after self-cal, rms=0.116104Jy sigma=0.001668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.651 mas, bmaj=4.317 mas, bpa=80.03 degrees ! Estimated noise=1045.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456512 Jy ! Component: 100 - total flux cleaned = 0.00521743 Jy ! Component: 150 - total flux cleaned = 0.00569283 Jy ! Component: 200 - total flux cleaned = 0.005887 Jy ! Total flux subtracted in 200 components = 0.005887 Jy ! Clean residual min=-0.005361 max=0.012372 Jy/beam ! Clean residual mean=-0.000006 rms=0.002021 Jy/beam ! Combined flux in latest and established models = 0.295416 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.295416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115581Jy sigma=0.001668 ! Fit after self-cal, rms=0.116544Jy sigma=0.001661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (121, 79.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116264 Jy ! Component: 100 - total flux cleaned = 0.0123519 Jy ! Component: 150 - total flux cleaned = 0.0132282 Jy ! Component: 200 - total flux cleaned = 0.0137525 Jy ! Total flux subtracted in 200 components = 0.0137525 Jy ! Clean residual min=-0.005415 max=0.012074 Jy/beam ! Clean residual mean=-0.000003 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.309169 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 0.309169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115026Jy sigma=0.001645 ! Fit after self-cal, rms=0.114995Jy sigma=0.001643 ! Inverting map ! Added new window around map position (1, -39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105048 Jy ! Component: 100 - total flux cleaned = 0.0105182 Jy ! Component: 150 - total flux cleaned = 0.010319 Jy ! Component: 200 - total flux cleaned = 0.0103237 Jy ! Total flux subtracted in 200 components = 0.0103237 Jy ! Clean residual min=-0.004990 max=0.010816 Jy/beam ! Clean residual mean=0.000012 rms=0.001743 Jy/beam ! Combined flux in latest and established models = 0.319492 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 0.319492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113795Jy sigma=0.001628 ! Fit after self-cal, rms=0.113770Jy sigma=0.001626 ! Inverting map ! Added new window around map position (-46, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931681 Jy ! Component: 100 - total flux cleaned = 0.0105896 Jy ! Component: 150 - total flux cleaned = 0.0109198 Jy ! Component: 200 - total flux cleaned = 0.0112239 Jy ! Total flux subtracted in 200 components = 0.0112239 Jy ! Clean residual min=-0.005587 max=0.007872 Jy/beam ! Clean residual mean=0.000005 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.330716 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 99 components and 0.330716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112866Jy sigma=0.001614 ! Fit after self-cal, rms=0.112878Jy sigma=0.001614 ! Inverting map ! Added new window around map position (22, 57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603049 Jy ! Component: 100 - total flux cleaned = 0.00619789 Jy ! Component: 150 - total flux cleaned = 0.00663994 Jy ! Component: 200 - total flux cleaned = 0.00705027 Jy ! Total flux subtracted in 200 components = 0.00705027 Jy ! Clean residual min=-0.005370 max=0.007598 Jy/beam ! Clean residual mean=0.000014 rms=0.001406 Jy/beam ! Combined flux in latest and established models = 0.337767 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 0.337766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112314Jy sigma=0.001607 ! Fit after self-cal, rms=0.112306Jy sigma=0.001607 ! Inverting map ! Added new window around map position (-119.5, -80.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00403699 Jy ! Component: 100 - total flux cleaned = 0.00313112 Jy ! Component: 150 - total flux cleaned = 0.00267214 Jy ! Component: 200 - total flux cleaned = 0.00281442 Jy ! Total flux subtracted in 200 components = 0.00281442 Jy ! Clean residual min=-0.005044 max=0.006002 Jy/beam ! Clean residual mean=0.000016 rms=0.001305 Jy/beam ! Combined flux in latest and established models = 0.340581 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 134 components and 0.340581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111613Jy sigma=0.001600 ! Fit after self-cal, rms=0.111625Jy sigma=0.001600 ! Inverting map ! Added new window around map position (118, 121.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00406492 Jy ! Component: 100 - total flux cleaned = 0.00422351 Jy ! Component: 150 - total flux cleaned = 0.00396157 Jy ! Component: 200 - total flux cleaned = 0.0038437 Jy ! Total flux subtracted in 200 components = 0.0038437 Jy ! Clean residual min=-0.005978 max=0.005774 Jy/beam ! Clean residual mean=0.000015 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.344425 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 155 components and 0.344425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111046Jy sigma=0.001597 ! Fit after self-cal, rms=0.111028Jy sigma=0.001596 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111028Jy sigma=0.001596 ! Fit after self-cal, rms=0.105833Jy sigma=0.001587 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.635 mas, bmaj=4.299 mas, bpa=82.44 degrees ! Estimated noise=1040.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510577 Jy ! Component: 100 - total flux cleaned = 0.00730277 Jy ! Component: 150 - total flux cleaned = 0.00757774 Jy ! Component: 200 - total flux cleaned = 0.00770735 Jy ! Total flux subtracted in 200 components = 0.00770735 Jy ! Clean residual min=-0.004802 max=0.005359 Jy/beam ! Clean residual mean=0.000013 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.352132 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 178 components and 0.352132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105538Jy sigma=0.001582 ! Fit after self-cal, rms=0.105507Jy sigma=0.001582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113576 Jy ! Component: 100 - total flux cleaned = 0.00103118 Jy ! Component: 150 - total flux cleaned = 0.000824662 Jy ! Component: 200 - total flux cleaned = 0.000825554 Jy ! Total flux subtracted in 200 components = 0.000825554 Jy ! Clean residual min=-0.004866 max=0.004940 Jy/beam ! Clean residual mean=0.000012 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.352957 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 190 components and 0.352957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105361Jy sigma=0.001579 ! Fit after self-cal, rms=0.105356Jy sigma=0.001579 ! Inverting map ! Added new window around map position (-84.5, -95). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435702 Jy ! Component: 100 - total flux cleaned = 0.00650872 Jy ! Component: 150 - total flux cleaned = 0.00729414 Jy ! Component: 200 - total flux cleaned = 0.00775503 Jy ! Total flux subtracted in 200 components = 0.00775503 Jy ! Clean residual min=-0.004494 max=0.004738 Jy/beam ! Clean residual mean=0.000009 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.360712 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 213 components and 0.360712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105158Jy sigma=0.001576 ! Fit after self-cal, rms=0.105161Jy sigma=0.001576 ! Inverting map ! Added new window around map position (60.5, -59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397817 Jy ! Component: 100 - total flux cleaned = 0.00581542 Jy ! Component: 150 - total flux cleaned = 0.00689145 Jy ! Component: 200 - total flux cleaned = 0.00749039 Jy ! Total flux subtracted in 200 components = 0.00749039 Jy ! Clean residual min=-0.004011 max=0.004170 Jy/beam ! Clean residual mean=0.000010 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.368203 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 237 components and 0.368203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104984Jy sigma=0.001574 ! Fit after self-cal, rms=0.104966Jy sigma=0.001574 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104966Jy sigma=0.001574 ! Fit after self-cal, rms=0.104095Jy sigma=0.001572 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.493 mas, bmaj=8.862 mas, bpa=65.61 degrees ! Estimated noise=1380.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000475996 Jy ! Component: 100 - total flux cleaned = 0.0003693 Jy ! Component: 150 - total flux cleaned = 0.000774232 Jy ! Component: 200 - total flux cleaned = 0.00105841 Jy ! Total flux subtracted in 200 components = 0.00105841 Jy ! Clean residual min=-0.004938 max=0.004505 Jy/beam ! Clean residual mean=0.000026 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.369261 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 264 components and 0.369261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104026Jy sigma=0.001572 ! Fit after self-cal, rms=0.104001Jy sigma=0.001572 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000524255 Jy ! Component: 100 - total flux cleaned = -0.000461059 Jy ! Component: 150 - total flux cleaned = -0.000403317 Jy ! Component: 200 - total flux cleaned = -0.000346485 Jy ! Total flux subtracted in 200 components = -0.000346485 Jy ! Clean residual min=-0.004774 max=0.004279 Jy/beam ! Clean residual mean=0.000022 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.368915 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 283 components and 0.368915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103969Jy sigma=0.001571 ! Fit after self-cal, rms=0.103958Jy sigma=0.001571 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.292 mas, bpa=83.9 degrees ! Estimated noise=1034.51 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.292 at 83.9 degrees (North through East) ! Clean map min=-0.010882 max=0.27115 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.1 mas, bmaj=3.675 mas, bpa=77.18 degrees ! Estimated noise=1313.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.205063 Jy ! Component: 100 - total flux cleaned = 0.259011 Jy ! Component: 150 - total flux cleaned = 0.283358 Jy ! Component: 200 - total flux cleaned = 0.301745 Jy ! Total flux subtracted in 200 components = 0.301745 Jy ! Clean residual min=-0.008654 max=0.014293 Jy/beam ! Clean residual mean=-0.000012 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 0.301745 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.301745 Jy ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.292 mas, bpa=83.9 degrees ! Estimated noise=1034.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 39). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159271 Jy ! Component: 100 - total flux cleaned = 0.0262686 Jy ! Component: 150 - total flux cleaned = 0.0321664 Jy ! Component: 200 - total flux cleaned = 0.0370178 Jy ! Total flux subtracted in 200 components = 0.0370178 Jy ! Clean residual min=-0.006164 max=0.008731 Jy/beam ! Clean residual mean=0.000008 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.338763 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 62 components and 0.338763 Jy ! Inverting map ! Added new window around map position (123, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00660931 Jy ! Component: 100 - total flux cleaned = 0.00890994 Jy ! Component: 150 - total flux cleaned = 0.0102424 Jy ! Component: 200 - total flux cleaned = 0.0119753 Jy ! Total flux subtracted in 200 components = 0.0119753 Jy ! Clean residual min=-0.005639 max=0.006910 Jy/beam ! Clean residual mean=0.000013 rms=0.001543 Jy/beam ! Combined flux in latest and established models = 0.350738 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 84 components and 0.350738 Jy ! Inverting map ! Added new window around map position (-78, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374119 Jy ! Component: 100 - total flux cleaned = 0.00525713 Jy ! Component: 150 - total flux cleaned = 0.00706916 Jy ! Component: 200 - total flux cleaned = 0.00877617 Jy ! Total flux subtracted in 200 components = 0.00877617 Jy ! Clean residual min=-0.004996 max=0.005841 Jy/beam ! Clean residual mean=0.000013 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.359514 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 112 components and 0.359514 Jy ! Inverting map ! Added new window around map position (-109.5, -97.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00401032 Jy ! Component: 100 - total flux cleaned = 0.00557453 Jy ! Component: 150 - total flux cleaned = 0.00672112 Jy ! Component: 200 - total flux cleaned = 0.00811362 Jy ! Total flux subtracted in 200 components = 0.00811362 Jy ! Clean residual min=-0.004568 max=0.004907 Jy/beam ! Clean residual mean=0.000017 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.367628 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 140 components and 0.367628 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.493 mas, bmaj=8.862 mas, bpa=65.61 degrees ! Estimated noise=1380.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037052 Jy ! Component: 100 - total flux cleaned = 0.000249342 Jy ! Component: 150 - total flux cleaned = 0.000143593 Jy ! Component: 200 - total flux cleaned = 0.0001415 Jy ! Total flux subtracted in 200 components = 0.0001415 Jy ! Clean residual min=-0.003989 max=0.004515 Jy/beam ! Clean residual mean=0.000048 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.367769 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036291 Jy ! Component: 100 - total flux cleaned = 0.000788361 Jy ! Component: 150 - total flux cleaned = 0.00127011 Jy ! Component: 200 - total flux cleaned = 0.00172786 Jy ! Total flux subtracted in 200 components = 0.00172786 Jy ! Clean residual min=-0.003965 max=0.004358 Jy/beam ! Clean residual mean=0.000048 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.369497 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 185 components and 0.369497 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.628 mas, bmaj=4.292 mas, bpa=83.9 degrees ! Estimated noise=1034.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186144 Jy ! Component: 100 - total flux cleaned = 0.0025437 Jy ! Component: 150 - total flux cleaned = 0.00305884 Jy ! Component: 200 - total flux cleaned = 0.00342239 Jy ! Total flux subtracted in 200 components = 0.00342239 Jy ! Clean residual min=-0.003895 max=0.004110 Jy/beam ! Clean residual mean=0.000022 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.372919 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 211 components and 0.372919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103975Jy sigma=0.001573 ! Fit after self-cal, rms=0.103908Jy sigma=0.001572 wmodel J1343+6602_S_2015_01_23_pus_map.mod ! Writing 211 model components to file: J1343+6602_S_2015_01_23_pus_map.mod wobs J1343+6602_S_2015_01_23_pus_uvs.fits ! Writing UV FITS file: J1343+6602_S_2015_01_23_pus_uvs.fits wwins J1343+6602_S_2015_01_23_pus_map.win ! wwins: Wrote 13 windows to J1343+6602_S_2015_01_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152508 Jy ! Component: 100 - total flux cleaned = 0.00205729 Jy ! Component: 150 - total flux cleaned = 0.00256335 Jy ! Component: 200 - total flux cleaned = 0.00311166 Jy ! Component: 250 - total flux cleaned = 0.00381917 Jy ! Component: 300 - total flux cleaned = 0.00427619 Jy ! Component: 350 - total flux cleaned = 0.00483157 Jy ! Component: 400 - total flux cleaned = 0.00548091 Jy ! Component: 450 - total flux cleaned = 0.00616726 Jy ! Component: 500 - total flux cleaned = 0.00668328 Jy ! Component: 550 - total flux cleaned = 0.00723993 Jy ! Component: 600 - total flux cleaned = 0.00783668 Jy ! Component: 650 - total flux cleaned = 0.00827704 Jy ! Component: 700 - total flux cleaned = 0.00885382 Jy ! Component: 750 - total flux cleaned = 0.00918491 Jy ! Component: 800 - total flux cleaned = 0.00969722 Jy ! Component: 850 - total flux cleaned = 0.0101093 Jy ! Component: 900 - total flux cleaned = 0.0106505 Jy ! Component: 950 - total flux cleaned = 0.0110059 Jy ! Component: 1000 - total flux cleaned = 0.0114448 Jy ! Component: 1050 - total flux cleaned = 0.0119209 Jy ! Component: 1100 - total flux cleaned = 0.0122616 Jy ! Component: 1150 - total flux cleaned = 0.0128079 Jy ! Component: 1200 - total flux cleaned = 0.0131392 Jy ! Component: 1250 - total flux cleaned = 0.0133841 Jy ! Component: 1300 - total flux cleaned = 0.0135865 Jy ! Component: 1350 - total flux cleaned = 0.0139857 Jy ! Component: 1400 - total flux cleaned = 0.0141832 Jy ! Component: 1450 - total flux cleaned = 0.0144953 Jy ! Component: 1500 - total flux cleaned = 0.0148418 Jy ! Component: 1550 - total flux cleaned = 0.0150706 Jy ! Component: 1600 - total flux cleaned = 0.0152589 Jy ! Component: 1650 - total flux cleaned = 0.0154824 Jy ! Component: 1700 - total flux cleaned = 0.0157043 Jy ! Component: 1750 - total flux cleaned = 0.01596 Jy ! Component: 1800 - total flux cleaned = 0.0161042 Jy ! Component: 1850 - total flux cleaned = 0.0163542 Jy ! Component: 1900 - total flux cleaned = 0.0164958 Jy ! Component: 1950 - total flux cleaned = 0.0166009 Jy ! Component: 2000 - total flux cleaned = 0.0167049 Jy ! Component: 2050 - total flux cleaned = 0.0168771 Jy ! Component: 2100 - total flux cleaned = 0.0168769 Jy ! Component: 2150 - total flux cleaned = 0.0169108 Jy ! Component: 2200 - total flux cleaned = 0.0169775 Jy ! Component: 2250 - total flux cleaned = 0.0169446 Jy ! Component: 2300 - total flux cleaned = 0.0170767 Jy ! Component: 2350 - total flux cleaned = 0.0170116 Jy ! Component: 2400 - total flux cleaned = 0.0170764 Jy ! Component: 2450 - total flux cleaned = 0.0170766 Jy ! Component: 2500 - total flux cleaned = 0.0171083 Jy ! Component: 2550 - total flux cleaned = 0.0171403 Jy ! Component: 2600 - total flux cleaned = 0.0172345 Jy ! Component: 2650 - total flux cleaned = 0.0171717 Jy ! Component: 2700 - total flux cleaned = 0.0172646 Jy ! Component: 2750 - total flux cleaned = 0.0172645 Jy ! Component: 2800 - total flux cleaned = 0.0173254 Jy ! Component: 2850 - total flux cleaned = 0.0173857 Jy ! Component: 2900 - total flux cleaned = 0.0174755 Jy ! Component: 2950 - total flux cleaned = 0.0174756 Jy ! Component: 3000 - total flux cleaned = 0.0175056 Jy ! Component: 3050 - total flux cleaned = 0.0175646 Jy ! Component: 3100 - total flux cleaned = 0.017506 Jy ! Component: 3150 - total flux cleaned = 0.0174766 Jy ! Component: 3200 - total flux cleaned = 0.0175058 Jy ! Component: 3250 - total flux cleaned = 0.0175632 Jy ! Component: 3300 - total flux cleaned = 0.0174204 Jy ! Component: 3350 - total flux cleaned = 0.0173639 Jy ! Component: 3400 - total flux cleaned = 0.0173641 Jy ! Component: 3450 - total flux cleaned = 0.017336 Jy ! Component: 3500 - total flux cleaned = 0.0173079 Jy ! Component: 3550 - total flux cleaned = 0.0173358 Jy ! Component: 3600 - total flux cleaned = 0.0172804 Jy ! Component: 3650 - total flux cleaned = 0.0171978 Jy ! Component: 3700 - total flux cleaned = 0.0171978 Jy ! Component: 3750 - total flux cleaned = 0.017225 Jy ! Component: 3800 - total flux cleaned = 0.0170899 Jy ! Component: 3850 - total flux cleaned = 0.0170899 Jy ! Component: 3900 - total flux cleaned = 0.0169831 Jy ! Component: 3950 - total flux cleaned = 0.0169565 Jy ! Component: 4000 - total flux cleaned = 0.016877 Jy ! Component: 4050 - total flux cleaned = 0.0168772 Jy ! Total flux subtracted in 4096 components = 0.0168246 Jy ! Clean residual min=-0.001597 max=0.001430 Jy/beam ! Clean residual mean=0.000013 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.389744 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 525 components and 0.389744 Jy ![Exited script file: muppet] wmap "J1343+6602_S_2015_01_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.292 at 83.9 degrees (North through East) ! Clean map min=-0.0082386 max=0.26588 Jy/beam ! Writing clean map to FITS file: J1343+6602_S_2015_01_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.265878 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00047381 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.534617 0.534617 1.06923 2.13847 4.27694 8.55387 17.1077 34.2155 68.431 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.265 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.628 x 4.292 at 83.9 degrees (North through East) ! Clean map min=-0.0082386 max=0.26588 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1343+6602_S_2015_01_23_pus_uvs.log closed on Mon Jan 2 19:26:10 2017