! Started logfile: J1341+2816_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:07:01 2016 obs J1341+2816_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1341+2816_S_2014_08_09_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.875789 visibilities/baseline/integration-bin. ! Found source: J1341+2816 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 342 lines of history. ! ! Reading 14976 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1341+2816_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903839Jy sigma=0.011537 ! Fit after self-cal, rms=0.891463Jy sigma=0.011399 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.259 mas, bpa=5.103 degrees ! Estimated noise=694.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859554 Jy ! Component: 100 - total flux cleaned = 0.104762 Jy ! Total flux subtracted in 100 components = 0.104762 Jy ! Clean residual min=-0.004096 max=0.005893 Jy/beam ! Clean residual mean=-0.000001 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.104762 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.104762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069637Jy sigma=0.000806 ! Fit after self-cal, rms=0.069629Jy sigma=0.000806 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=8.071 mas, bpa=4.712 degrees ! Estimated noise=463.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471799 Jy ! Component: 100 - total flux cleaned = 0.00711053 Jy ! Component: 150 - total flux cleaned = 0.00850048 Jy ! Component: 200 - total flux cleaned = 0.00901857 Jy ! Total flux subtracted in 200 components = 0.00901857 Jy ! Clean residual min=-0.003334 max=0.004339 Jy/beam ! Clean residual mean=-0.000010 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.11378 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.11378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069151Jy sigma=0.000804 ! Fit after self-cal, rms=0.069153Jy sigma=0.000804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.15 HN 0.92 KP 1.06 ! LA 1.12 MK 1.01 NL 0.86 OV 0.99 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.28 HN 1.00 KP 1.01 ! LA 1.04 MK 1.04 NL 1.02 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.31 HN 1.05 KP 0.89 ! LA 0.82 MK 1.04 NL 0.98 OV 0.94 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.14 HN 0.96 KP 0.85 ! LA 0.76 MK 1.07 NL 1.03 OV 0.95 ! PT 1.01 SC 1.00 ! ! ! Fit before self-cal, rms=0.069153Jy sigma=0.000804 ! Fit after self-cal, rms=0.067584Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=8.065 mas, bpa=4.644 degrees ! Estimated noise=466.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000862683 Jy ! Component: 100 - total flux cleaned = 0.000862365 Jy ! Component: 150 - total flux cleaned = 0.000862363 Jy ! Component: 200 - total flux cleaned = 0.000881506 Jy ! Total flux subtracted in 200 components = 0.000881506 Jy ! Clean residual min=-0.003062 max=0.002441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.114662 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 38 components and 0.114662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067538Jy sigma=0.000781 ! Fit after self-cal, rms=0.067551Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067551Jy sigma=0.000781 ! Fit after self-cal, rms=0.065366Jy sigma=0.000771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=8.078 mas, bpa=4.627 degrees ! Estimated noise=466.392 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.04245e-05 Jy ! Component: 100 - total flux cleaned = 6.9271e-06 Jy ! Component: 150 - total flux cleaned = 3.88089e-05 Jy ! Component: 200 - total flux cleaned = 5.6463e-05 Jy ! Total flux subtracted in 200 components = 5.6463e-05 Jy ! Clean residual min=-0.001274 max=0.001766 Jy/beam ! Clean residual mean=0.000002 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.114718 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.114718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065360Jy sigma=0.000771 ! Fit after self-cal, rms=0.065353Jy sigma=0.000771 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-107.5, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110723 Jy ! Component: 100 - total flux cleaned = 0.0014711 Jy ! Component: 150 - total flux cleaned = 0.00161952 Jy ! Component: 200 - total flux cleaned = 0.00164019 Jy ! Total flux subtracted in 200 components = 0.00164019 Jy ! Clean residual min=-0.001303 max=0.001426 Jy/beam ! Clean residual mean=0.000002 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.116358 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 66 components and 0.116358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065314Jy sigma=0.000770 ! Fit after self-cal, rms=0.065311Jy sigma=0.000770 ! Inverting map ! Added new window around map position (-48.5, -72). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000734176 Jy ! Component: 100 - total flux cleaned = 0.00089065 Jy ! Component: 150 - total flux cleaned = 0.00095468 Jy ! Component: 200 - total flux cleaned = 0.00103093 Jy ! Total flux subtracted in 200 components = 0.00103093 Jy ! Clean residual min=-0.001224 max=0.001314 Jy/beam ! Clean residual mean=0.000002 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.117389 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 0.117389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065281Jy sigma=0.000770 ! Fit after self-cal, rms=0.065278Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065278Jy sigma=0.000770 ! Fit after self-cal, rms=0.065282Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=8.073 mas, bpa=4.625 degrees ! Estimated noise=466.342 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283812 Jy ! Component: 100 - total flux cleaned = 0.000374475 Jy ! Component: 150 - total flux cleaned = 0.000406706 Jy ! Component: 200 - total flux cleaned = 0.000453611 Jy ! Total flux subtracted in 200 components = 0.000453611 Jy ! Clean residual min=-0.001232 max=0.001296 Jy/beam ! Clean residual mean=0.000002 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.117843 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 0.117843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065271Jy sigma=0.000770 ! Fit after self-cal, rms=0.065271Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142153 Jy ! Component: 100 - total flux cleaned = 0.000170852 Jy ! Component: 150 - total flux cleaned = 0.000225976 Jy ! Component: 200 - total flux cleaned = 0.000265767 Jy ! Total flux subtracted in 200 components = 0.000265767 Jy ! Clean residual min=-0.001223 max=0.001294 Jy/beam ! Clean residual mean=0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.118109 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 103 components and 0.118109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065264Jy sigma=0.000770 ! Fit after self-cal, rms=0.065264Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065264Jy sigma=0.000770 ! Fit after self-cal, rms=0.065287Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=9.975 mas, bpa=-3.307 degrees ! Estimated noise=549.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322079 Jy ! Component: 100 - total flux cleaned = 0.00048404 Jy ! Component: 150 - total flux cleaned = 0.000533039 Jy ! Component: 200 - total flux cleaned = 0.000532812 Jy ! Total flux subtracted in 200 components = 0.000532812 Jy ! Clean residual min=-0.001302 max=0.001566 Jy/beam ! Clean residual mean=0.000003 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.118641 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 132 components and 0.118641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065284Jy sigma=0.000770 ! Fit after self-cal, rms=0.065284Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.14114e-05 Jy ! Component: 100 - total flux cleaned = 8.34768e-05 Jy ! Component: 150 - total flux cleaned = 9.01905e-05 Jy ! Component: 200 - total flux cleaned = 0.000109487 Jy ! Total flux subtracted in 200 components = 0.000109487 Jy ! Clean residual min=-0.001290 max=0.001546 Jy/beam ! Clean residual mean=0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.118751 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 143 components and 0.118751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065283Jy sigma=0.000770 ! Fit after self-cal, rms=0.065283Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=8.072 mas, bpa=4.623 degrees ! Estimated noise=466.549 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 8.072 at 4.623 degrees (North through East) ! Clean map min=-0.0011732 max=0.1093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=7.291 mas, bpa=4.919 degrees ! Estimated noise=687.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850179 Jy ! Component: 100 - total flux cleaned = 0.103577 Jy ! Component: 150 - total flux cleaned = 0.108975 Jy ! Component: 200 - total flux cleaned = 0.111415 Jy ! Total flux subtracted in 200 components = 0.111415 Jy ! Clean residual min=-0.002128 max=0.002094 Jy/beam ! Clean residual mean=0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.111415 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.111415 Jy ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=8.072 mas, bpa=4.623 degrees ! Estimated noise=466.549 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226326 Jy ! Component: 100 - total flux cleaned = 0.00359543 Jy ! Component: 150 - total flux cleaned = 0.00452033 Jy ! Component: 200 - total flux cleaned = 0.00527299 Jy ! Total flux subtracted in 200 components = 0.00527299 Jy ! Clean residual min=-0.001161 max=0.001179 Jy/beam ! Clean residual mean=0.000002 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.116688 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.116688 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.51 mas, bmaj=9.975 mas, bpa=-3.307 degrees ! Estimated noise=549.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956249 Jy ! Component: 100 - total flux cleaned = 0.00142129 Jy ! Component: 150 - total flux cleaned = 0.00180635 Jy ! Component: 200 - total flux cleaned = 0.00201757 Jy ! Total flux subtracted in 200 components = 0.00201757 Jy ! Clean residual min=-0.001381 max=0.001399 Jy/beam ! Clean residual mean=0.000003 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.118706 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000123797 Jy ! Component: 100 - total flux cleaned = 0.000179467 Jy ! Component: 150 - total flux cleaned = 0.000231107 Jy ! Component: 200 - total flux cleaned = 0.000279559 Jy ! Total flux subtracted in 200 components = 0.000279559 Jy ! Clean residual min=-0.001349 max=0.001376 Jy/beam ! Clean residual mean=0.000003 rms=0.000351 Jy/beam ! Combined flux in latest and established models = 0.118986 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 106 components and 0.118986 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=8.072 mas, bpa=4.623 degrees ! Estimated noise=466.549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181255 Jy ! Component: 100 - total flux cleaned = 5.93105e-05 Jy ! Component: 150 - total flux cleaned = 5.89508e-05 Jy ! Component: 200 - total flux cleaned = 9.92202e-05 Jy ! Total flux subtracted in 200 components = 9.92202e-05 Jy ! Clean residual min=-0.001103 max=0.001165 Jy/beam ! Clean residual mean=0.000002 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.119085 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 125 components and 0.119085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065290Jy sigma=0.000770 ! Fit after self-cal, rms=0.065284Jy sigma=0.000770 wmodel J1341+2816_S_2014_08_09_pus_map.mod ! Writing 125 model components to file: J1341+2816_S_2014_08_09_pus_map.mod wobs J1341+2816_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1341+2816_S_2014_08_09_pus_uvs.fits wwins J1341+2816_S_2014_08_09_pus_map.win ! wwins: Wrote 4 windows to J1341+2816_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026183 Jy ! Component: 100 - total flux cleaned = 0.000261746 Jy ! Component: 150 - total flux cleaned = 0.00020411 Jy ! Component: 200 - total flux cleaned = 0.000167717 Jy ! Component: 250 - total flux cleaned = 0.000203869 Jy ! Component: 300 - total flux cleaned = 0.000238463 Jy ! Component: 350 - total flux cleaned = 0.00025516 Jy ! Component: 400 - total flux cleaned = 0.00027144 Jy ! Component: 450 - total flux cleaned = 0.000255351 Jy ! Component: 500 - total flux cleaned = 0.000224096 Jy ! Component: 550 - total flux cleaned = 0.000208686 Jy ! Component: 600 - total flux cleaned = 0.00013333 Jy ! Component: 650 - total flux cleaned = 8.93465e-05 Jy ! Component: 700 - total flux cleaned = 4.57182e-05 Jy ! Component: 750 - total flux cleaned = -2.58338e-05 Jy ! Component: 800 - total flux cleaned = -3.97544e-05 Jy ! Component: 850 - total flux cleaned = -9.55194e-05 Jy ! Component: 900 - total flux cleaned = -0.000136572 Jy ! Component: 950 - total flux cleaned = -0.000217288 Jy ! Component: 1000 - total flux cleaned = -0.000257084 Jy ! Component: 1050 - total flux cleaned = -0.000335595 Jy ! Component: 1100 - total flux cleaned = -0.000348427 Jy ! Component: 1150 - total flux cleaned = -0.000411991 Jy ! Component: 1200 - total flux cleaned = -0.000424394 Jy ! Component: 1250 - total flux cleaned = -0.000486172 Jy ! Component: 1300 - total flux cleaned = -0.000510333 Jy ! Component: 1350 - total flux cleaned = -0.00052214 Jy ! Component: 1400 - total flux cleaned = -0.000533858 Jy ! Component: 1450 - total flux cleaned = -0.000522025 Jy ! Component: 1500 - total flux cleaned = -0.0005683 Jy ! Component: 1550 - total flux cleaned = -0.000613788 Jy ! Component: 1600 - total flux cleaned = -0.000602626 Jy ! Component: 1650 - total flux cleaned = -0.000624892 Jy ! Component: 1700 - total flux cleaned = -0.000690868 Jy ! Component: 1750 - total flux cleaned = -0.000723548 Jy ! Component: 1800 - total flux cleaned = -0.000734448 Jy ! Component: 1850 - total flux cleaned = -0.000766424 Jy ! Component: 1900 - total flux cleaned = -0.00082951 Jy ! Component: 1950 - total flux cleaned = -0.00085032 Jy ! Component: 2000 - total flux cleaned = -0.00089157 Jy ! Component: 2050 - total flux cleaned = -0.000901848 Jy ! Component: 2100 - total flux cleaned = -0.000952293 Jy ! Component: 2150 - total flux cleaned = -0.000962237 Jy ! Component: 2200 - total flux cleaned = -0.000971949 Jy ! Component: 2250 - total flux cleaned = -0.000991548 Jy ! Component: 2300 - total flux cleaned = -0.00100124 Jy ! Component: 2350 - total flux cleaned = -0.00102995 Jy ! Component: 2400 - total flux cleaned = -0.00103947 Jy ! Component: 2450 - total flux cleaned = -0.000983091 Jy ! Component: 2500 - total flux cleaned = -0.00102061 Jy ! Component: 2550 - total flux cleaned = -0.00102986 Jy ! Component: 2600 - total flux cleaned = -0.00103001 Jy ! Component: 2650 - total flux cleaned = -0.0010481 Jy ! Component: 2700 - total flux cleaned = -0.0010571 Jy ! Component: 2750 - total flux cleaned = -0.00104815 Jy ! Component: 2800 - total flux cleaned = -0.0010748 Jy ! Component: 2850 - total flux cleaned = -0.00106605 Jy ! Component: 2900 - total flux cleaned = -0.00110094 Jy ! Component: 2950 - total flux cleaned = -0.00111821 Jy ! Component: 3000 - total flux cleaned = -0.00115251 Jy ! Component: 3050 - total flux cleaned = -0.00111859 Jy ! Component: 3100 - total flux cleaned = -0.00117793 Jy ! Component: 3150 - total flux cleaned = -0.00119475 Jy ! Component: 3200 - total flux cleaned = -0.00118653 Jy ! Component: 3250 - total flux cleaned = -0.00120315 Jy ! Component: 3300 - total flux cleaned = -0.00126073 Jy ! Component: 3350 - total flux cleaned = -0.00129335 Jy ! Component: 3400 - total flux cleaned = -0.00126091 Jy ! Component: 3450 - total flux cleaned = -0.00128506 Jy ! Component: 3500 - total flux cleaned = -0.00129316 Jy ! Component: 3550 - total flux cleaned = -0.00132503 Jy ! Component: 3600 - total flux cleaned = -0.00132496 Jy ! Component: 3650 - total flux cleaned = -0.00133281 Jy ! Component: 3700 - total flux cleaned = -0.00132495 Jy ! Component: 3750 - total flux cleaned = -0.00137141 Jy ! Component: 3800 - total flux cleaned = -0.00133287 Jy ! Component: 3850 - total flux cleaned = -0.00135589 Jy ! Component: 3900 - total flux cleaned = -0.00136339 Jy ! Component: 3950 - total flux cleaned = -0.00135587 Jy ! Component: 4000 - total flux cleaned = -0.00137093 Jy ! Component: 4050 - total flux cleaned = -0.00134854 Jy ! Total flux subtracted in 4096 components = -0.0013708 Jy ! Clean residual min=-0.000470 max=0.000514 Jy/beam ! Clean residual mean=-0.000000 rms=0.000140 Jy/beam ! Combined flux in latest and established models = 0.117714 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 434 components and 0.117714 Jy ![Exited script file: muppet] wmap "J1341+2816_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 8.072 at 4.623 degrees (North through East) ! Clean map min=-0.00085814 max=0.10939 Jy/beam ! Writing clean map to FITS file: J1341+2816_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109389 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000137112 device "J1341+2816_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1341+2816_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.376029 0.376029 0.752058 1.50412 3.00823 6.01647 12.0329 24.0659 48.1317 96.2635 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 8.072 at 4.623 degrees (North through East) ! Clean map min=-0.00085814 max=0.10939 Jy/beam quit ! Quitting program ! Log file J1341+2816_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:07:06 2016