! Started logfile: J1340-0335_S_2014_12_20_pus_uvs.log on Wed Dec 28 13:37:12 2016 obs J1340-0335_S_2014_12_20_pus_uva.fits ! Reading UV FITS file: J1340-0335_S_2014_12_20_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979744 visibilities/baseline/integration-bin. ! Found source: J1340-0335 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 344 lines of history. ! ! Reading 19928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1340-0335_S_2014_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.796376Jy sigma=0.008023 ! Fit after self-cal, rms=0.727114Jy sigma=0.007303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.624 mas, bmaj=6.616 mas, bpa=-2.569 degrees ! Estimated noise=798.566 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197631 Jy ! Component: 100 - total flux cleaned = 0.270198 Jy ! Total flux subtracted in 100 components = 0.270198 Jy ! Clean residual min=-0.029711 max=0.082502 Jy/beam ! Clean residual mean=0.000014 rms=0.008169 Jy/beam ! Combined flux in latest and established models = 0.270198 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.270198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205864Jy sigma=0.001998 ! Fit after self-cal, rms=0.205787Jy sigma=0.001996 ! Inverting map ! Added new window around map position (-6, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747827 Jy ! Component: 100 - total flux cleaned = 0.118896 Jy ! Total flux subtracted in 100 components = 0.118896 Jy ! Clean residual min=-0.021586 max=0.058721 Jy/beam ! Clean residual mean=0.000006 rms=0.005837 Jy/beam ! Combined flux in latest and established models = 0.389094 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 0.389093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160579Jy sigma=0.001519 ! Fit after self-cal, rms=0.155952Jy sigma=0.001476 ! Inverting map ! Added new window around map position (4.5, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527301 Jy ! Component: 100 - total flux cleaned = 0.0872008 Jy ! Total flux subtracted in 100 components = 0.0872008 Jy ! Clean residual min=-0.015021 max=0.020574 Jy/beam ! Clean residual mean=0.000002 rms=0.003741 Jy/beam ! Combined flux in latest and established models = 0.476294 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 0.476294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127028Jy sigma=0.001172 ! Fit after self-cal, rms=0.125481Jy sigma=0.001158 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287958 Jy ! Component: 100 - total flux cleaned = 0.0495163 Jy ! Total flux subtracted in 100 components = 0.0495163 Jy ! Clean residual min=-0.010948 max=0.012208 Jy/beam ! Clean residual mean=-0.000000 rms=0.002785 Jy/beam ! Combined flux in latest and established models = 0.525811 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.525811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113435Jy sigma=0.001037 ! Fit after self-cal, rms=0.113069Jy sigma=0.001034 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.165 mas, bmaj=7.673 mas, bpa=-2.802 degrees ! Estimated noise=507.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0281929 Jy ! Component: 100 - total flux cleaned = 0.0473696 Jy ! Component: 150 - total flux cleaned = 0.0613044 Jy ! Component: 200 - total flux cleaned = 0.0716007 Jy ! Total flux subtracted in 200 components = 0.0716007 Jy ! Clean residual min=-0.011305 max=0.010672 Jy/beam ! Clean residual mean=0.000000 rms=0.002809 Jy/beam ! Combined flux in latest and established models = 0.597411 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 106 components and 0.597411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102726Jy sigma=0.000947 ! Fit after self-cal, rms=0.102557Jy sigma=0.000945 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.84 HN 0.96 KP 1.06 ! LA 0.92 MK 1.01 NL 0.96 OV 0.96 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.05 KP 1.04 ! LA 0.90 MK 0.99 NL 1.07 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.17 HN 1.06 KP 0.93 ! LA 0.75 MK 1.02 NL 1.28 OV 0.93 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.00 HN 0.98 KP 0.90 ! LA 0.82 MK 1.03 NL 1.02 OV 1.01 ! PT 1.08 SC 0.99 ! ! ! Fit before self-cal, rms=0.102557Jy sigma=0.000945 ! Fit after self-cal, rms=0.087121Jy sigma=0.000825 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=7.727 mas, bpa=-2.565 degrees ! Estimated noise=503.291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131341 Jy ! Component: 100 - total flux cleaned = 0.00144079 Jy ! Component: 150 - total flux cleaned = 0.00155279 Jy ! Component: 200 - total flux cleaned = 0.00164835 Jy ! Total flux subtracted in 200 components = 0.00164835 Jy ! Clean residual min=-0.006097 max=0.005823 Jy/beam ! Clean residual mean=0.000000 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.59906 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 128 components and 0.59906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086770Jy sigma=0.000822 ! Fit after self-cal, rms=0.086737Jy sigma=0.000821 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086737Jy sigma=0.000821 ! Fit after self-cal, rms=0.084035Jy sigma=0.000800 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=7.748 mas, bpa=-2.763 degrees ! Estimated noise=500.682 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000855906 Jy ! Component: 100 - total flux cleaned = 0.00131745 Jy ! Component: 150 - total flux cleaned = 0.00182074 Jy ! Component: 200 - total flux cleaned = 0.00219561 Jy ! Total flux subtracted in 200 components = 0.00219561 Jy ! Clean residual min=-0.002848 max=0.002493 Jy/beam ! Clean residual mean=0.000002 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.601255 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 144 components and 0.601255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083917Jy sigma=0.000799 ! Fit after self-cal, rms=0.083920Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000293437 Jy ! Component: 100 - total flux cleaned = 0.000598191 Jy ! Component: 150 - total flux cleaned = 0.000869985 Jy ! Component: 200 - total flux cleaned = 0.00103406 Jy ! Total flux subtracted in 200 components = 0.00103406 Jy ! Clean residual min=-0.002672 max=0.002376 Jy/beam ! Clean residual mean=0.000002 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.602289 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 149 components and 0.602289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083869Jy sigma=0.000798 ! Fit after self-cal, rms=0.083866Jy sigma=0.000798 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083866Jy sigma=0.000798 ! Fit after self-cal, rms=0.083821Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=7.753 mas, bpa=-2.788 degrees ! Estimated noise=500.504 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124283 Jy ! Component: 100 - total flux cleaned = 0.000378538 Jy ! Component: 150 - total flux cleaned = 0.000569203 Jy ! Component: 200 - total flux cleaned = 0.000706465 Jy ! Total flux subtracted in 200 components = 0.000706465 Jy ! Clean residual min=-0.002565 max=0.002293 Jy/beam ! Clean residual mean=0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.602996 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 156 components and 0.602995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083785Jy sigma=0.000798 ! Fit after self-cal, rms=0.083783Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011577 Jy ! Component: 100 - total flux cleaned = 0.000255621 Jy ! Component: 150 - total flux cleaned = 0.000382802 Jy ! Component: 200 - total flux cleaned = 0.000469866 Jy ! Total flux subtracted in 200 components = 0.000469866 Jy ! Clean residual min=-0.002456 max=0.002284 Jy/beam ! Clean residual mean=0.000001 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.603465 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 160 components and 0.603465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083759Jy sigma=0.000798 ! Fit after self-cal, rms=0.083757Jy sigma=0.000798 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083757Jy sigma=0.000798 ! Fit after self-cal, rms=0.083718Jy sigma=0.000798 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=12.88 mas, bpa=1.746 degrees ! Estimated noise=629.177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00057888 Jy ! Component: 100 - total flux cleaned = 0.000758346 Jy ! Component: 150 - total flux cleaned = 0.000882688 Jy ! Component: 200 - total flux cleaned = 0.000984099 Jy ! Total flux subtracted in 200 components = 0.000984099 Jy ! Clean residual min=-0.002382 max=0.002682 Jy/beam ! Clean residual mean=0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.604449 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 170 components and 0.604449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083710Jy sigma=0.000798 ! Fit after self-cal, rms=0.083709Jy sigma=0.000798 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.39983e-05 Jy ! Component: 100 - total flux cleaned = 7.92071e-05 Jy ! Component: 150 - total flux cleaned = 0.000123716 Jy ! Component: 200 - total flux cleaned = 0.000162201 Jy ! Total flux subtracted in 200 components = 0.000162201 Jy ! Clean residual min=-0.002361 max=0.002716 Jy/beam ! Clean residual mean=0.000002 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.604611 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 176 components and 0.604612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083707Jy sigma=0.000798 ! Fit after self-cal, rms=0.083706Jy sigma=0.000798 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.755 mas, bpa=-2.797 degrees ! Estimated noise=500.343 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.755 at -2.797 degrees (North through East) ! Clean map min=-0.0021873 max=0.25584 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.641 mas, bmaj=6.661 mas, bpa=-2.557 degrees ! Estimated noise=790.297 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199345 Jy ! Component: 100 - total flux cleaned = 0.290648 Jy ! Component: 150 - total flux cleaned = 0.357532 Jy ! Component: 200 - total flux cleaned = 0.408306 Jy ! Total flux subtracted in 200 components = 0.408306 Jy ! Clean residual min=-0.013995 max=0.029540 Jy/beam ! Clean residual mean=0.000014 rms=0.004260 Jy/beam ! Combined flux in latest and established models = 0.408306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.408306 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.755 mas, bpa=-2.797 degrees ! Estimated noise=500.343 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603139 Jy ! Component: 100 - total flux cleaned = 0.09933 Jy ! Component: 150 - total flux cleaned = 0.125587 Jy ! Component: 200 - total flux cleaned = 0.143943 Jy ! Total flux subtracted in 200 components = 0.143943 Jy ! Clean residual min=-0.004935 max=0.010257 Jy/beam ! Clean residual mean=0.000006 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.552249 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 76 components and 0.552249 Jy ! Inverting map ! Added new window around map position (-3, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132587 Jy ! Component: 100 - total flux cleaned = 0.0230226 Jy ! Component: 150 - total flux cleaned = 0.0302756 Jy ! Component: 200 - total flux cleaned = 0.0356966 Jy ! Total flux subtracted in 200 components = 0.0356966 Jy ! Clean residual min=-0.002940 max=0.003648 Jy/beam ! Clean residual mean=0.000002 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.587946 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 114 components and 0.587946 Jy ! Inverting map ! Added new window around map position (7.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432029 Jy ! Component: 100 - total flux cleaned = 0.00756617 Jy ! Component: 150 - total flux cleaned = 0.0100623 Jy ! Component: 200 - total flux cleaned = 0.0120124 Jy ! Total flux subtracted in 200 components = 0.0120124 Jy ! Clean residual min=-0.002320 max=0.002275 Jy/beam ! Clean residual mean=0.000001 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.599958 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 151 components and 0.599958 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.519 mas, bmaj=12.88 mas, bpa=1.746 degrees ! Estimated noise=629.177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218427 Jy ! Component: 100 - total flux cleaned = 0.00351735 Jy ! Component: 150 - total flux cleaned = 0.00437439 Jy ! Component: 200 - total flux cleaned = 0.00462414 Jy ! Total flux subtracted in 200 components = 0.00462414 Jy ! Clean residual min=-0.002503 max=0.002766 Jy/beam ! Clean residual mean=0.000002 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.604582 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000214663 Jy ! Component: 100 - total flux cleaned = 0.000400137 Jy ! Component: 150 - total flux cleaned = 0.000549246 Jy ! Component: 200 - total flux cleaned = 0.000652905 Jy ! Total flux subtracted in 200 components = 0.000652905 Jy ! Clean residual min=-0.002443 max=0.002834 Jy/beam ! Clean residual mean=0.000002 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.605235 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 189 components and 0.605235 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=7.755 mas, bpa=-2.797 degrees ! Estimated noise=500.343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000354363 Jy ! Component: 100 - total flux cleaned = -0.00019751 Jy ! Component: 150 - total flux cleaned = -0.000128439 Jy ! Component: 200 - total flux cleaned = -6.57605e-05 Jy ! Total flux subtracted in 200 components = -6.57605e-05 Jy ! Clean residual min=-0.001991 max=0.002429 Jy/beam ! Clean residual mean=0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.605169 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 207 components and 0.605169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083598Jy sigma=0.000797 ! Fit after self-cal, rms=0.083583Jy sigma=0.000797 wmodel J1340-0335_S_2014_12_20_pus_map.mod ! Writing 207 model components to file: J1340-0335_S_2014_12_20_pus_map.mod wobs J1340-0335_S_2014_12_20_pus_uvs.fits ! Writing UV FITS file: J1340-0335_S_2014_12_20_pus_uvs.fits wwins J1340-0335_S_2014_12_20_pus_map.win ! wwins: Wrote 5 windows to J1340-0335_S_2014_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000826607 Jy ! Component: 100 - total flux cleaned = 0.000902258 Jy ! Component: 150 - total flux cleaned = 0.000901672 Jy ! Component: 200 - total flux cleaned = 0.000965333 Jy ! Component: 250 - total flux cleaned = 0.0010554 Jy ! Component: 300 - total flux cleaned = 0.00105526 Jy ! Component: 350 - total flux cleaned = 0.00113991 Jy ! Component: 400 - total flux cleaned = 0.00127605 Jy ! Component: 450 - total flux cleaned = 0.00132798 Jy ! Component: 500 - total flux cleaned = 0.00125143 Jy ! Component: 550 - total flux cleaned = 0.00132745 Jy ! Component: 600 - total flux cleaned = 0.00135242 Jy ! Component: 650 - total flux cleaned = 0.00140068 Jy ! Component: 700 - total flux cleaned = 0.00137695 Jy ! Component: 750 - total flux cleaned = 0.00128448 Jy ! Component: 800 - total flux cleaned = 0.00128508 Jy ! Component: 850 - total flux cleaned = 0.00112933 Jy ! Component: 900 - total flux cleaned = 0.00112997 Jy ! Component: 950 - total flux cleaned = 0.00110837 Jy ! Component: 1000 - total flux cleaned = 0.00102369 Jy ! Component: 1050 - total flux cleaned = 0.000981934 Jy ! Component: 1100 - total flux cleaned = 0.000982134 Jy ! Component: 1150 - total flux cleaned = 0.000941209 Jy ! Component: 1200 - total flux cleaned = 0.000941043 Jy ! Component: 1250 - total flux cleaned = 0.00090168 Jy ! Component: 1300 - total flux cleaned = 0.000843085 Jy ! Component: 1350 - total flux cleaned = 0.000747658 Jy ! Component: 1400 - total flux cleaned = 0.000785673 Jy ! Component: 1450 - total flux cleaned = 0.000729504 Jy ! Component: 1500 - total flux cleaned = 0.000674276 Jy ! Component: 1550 - total flux cleaned = 0.000692622 Jy ! Component: 1600 - total flux cleaned = 0.000602755 Jy ! Component: 1650 - total flux cleaned = 0.00063819 Jy ! Component: 1700 - total flux cleaned = 0.000515507 Jy ! Component: 1750 - total flux cleaned = 0.000567447 Jy ! Component: 1800 - total flux cleaned = 0.000498855 Jy ! Component: 1850 - total flux cleaned = 0.000499259 Jy ! Component: 1900 - total flux cleaned = 0.000532729 Jy ! Component: 1950 - total flux cleaned = 0.000532554 Jy ! Component: 2000 - total flux cleaned = 0.000516215 Jy ! Component: 2050 - total flux cleaned = 0.000451591 Jy ! Component: 2100 - total flux cleaned = 0.000467598 Jy ! Component: 2150 - total flux cleaned = 0.000372728 Jy ! Component: 2200 - total flux cleaned = 0.000357295 Jy ! Component: 2250 - total flux cleaned = 0.000310842 Jy ! Component: 2300 - total flux cleaned = 0.000326165 Jy ! Component: 2350 - total flux cleaned = 0.000341308 Jy ! Component: 2400 - total flux cleaned = 0.000235745 Jy ! Component: 2450 - total flux cleaned = 0.000220819 Jy ! Component: 2500 - total flux cleaned = 0.000161994 Jy ! Component: 2550 - total flux cleaned = 0.000162097 Jy ! Component: 2600 - total flux cleaned = 0.000118885 Jy ! Component: 2650 - total flux cleaned = 0.000161712 Jy ! Component: 2700 - total flux cleaned = 4.81715e-05 Jy ! Component: 2750 - total flux cleaned = -7.61982e-06 Jy ! Component: 2800 - total flux cleaned = -7.55847e-06 Jy ! Component: 2850 - total flux cleaned = -7.69651e-06 Jy ! Component: 2900 - total flux cleaned = -7.6483e-06 Jy ! Component: 2950 - total flux cleaned = -4.82498e-05 Jy ! Component: 3000 - total flux cleaned = -0.00012876 Jy ! Component: 3050 - total flux cleaned = -0.000128968 Jy ! Component: 3100 - total flux cleaned = -0.000207866 Jy ! Component: 3150 - total flux cleaned = -0.000260088 Jy ! Component: 3200 - total flux cleaned = -0.00032458 Jy ! Component: 3250 - total flux cleaned = -0.00035029 Jy ! Component: 3300 - total flux cleaned = -0.000350491 Jy ! Component: 3350 - total flux cleaned = -0.000363084 Jy ! Component: 3400 - total flux cleaned = -0.000375656 Jy ! Component: 3450 - total flux cleaned = -0.000462566 Jy ! Component: 3500 - total flux cleaned = -0.000413388 Jy ! Component: 3550 - total flux cleaned = -0.000401373 Jy ! Component: 3600 - total flux cleaned = -0.000425788 Jy ! Component: 3650 - total flux cleaned = -0.00046175 Jy ! Component: 3700 - total flux cleaned = -0.000413848 Jy ! Component: 3750 - total flux cleaned = -0.000425753 Jy ! Component: 3800 - total flux cleaned = -0.000449198 Jy ! Component: 3850 - total flux cleaned = -0.00037905 Jy ! Component: 3900 - total flux cleaned = -0.000379222 Jy ! Component: 3950 - total flux cleaned = -0.000402196 Jy ! Component: 4000 - total flux cleaned = -0.000379276 Jy ! Component: 4050 - total flux cleaned = -0.000379161 Jy ! Total flux subtracted in 4096 components = -0.000390331 Jy ! Clean residual min=-0.000744 max=0.000560 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.604779 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 482 components and 0.604779 Jy ![Exited script file: muppet] wmap "J1340-0335_S_2014_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.755 at -2.797 degrees (North through East) ! Clean map min=-0.0012153 max=0.25633 Jy/beam ! Writing clean map to FITS file: J1340-0335_S_2014_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.256325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204916 device "J1340-0335_S_2014_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J1340-0335_S_2014_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23983 0.23983 0.479661 0.959322 1.91864 3.83729 7.67457 15.3491 30.6983 61.3966 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.256 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 7.755 at -2.797 degrees (North through East) ! Clean map min=-0.0012153 max=0.25633 Jy/beam quit ! Quitting program ! Log file J1340-0335_S_2014_12_20_pus_uvs.log closed on Wed Dec 28 13:37:19 2016