! Started logfile: J1339-2401_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:55:12 2017 obs J1339-2401_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1339-2401_S_2015_01_22_pus_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J1339-2401 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 5580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1339-2401_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.673625Jy sigma=0.006543 ! Fit after self-cal, rms=0.651391Jy sigma=0.006341 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.3 mas, bmaj=6.335 mas, bpa=2.668 degrees ! Estimated noise=1372.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268425 Jy ! Component: 100 - total flux cleaned = 0.327835 Jy ! Total flux subtracted in 100 components = 0.327835 Jy ! Clean residual min=-0.015461 max=0.024807 Jy/beam ! Clean residual mean=-0.000057 rms=0.004579 Jy/beam ! Combined flux in latest and established models = 0.327835 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.327835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112332Jy sigma=0.000993 ! Fit after self-cal, rms=0.112329Jy sigma=0.000993 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=7.332 mas, bpa=2.045 degrees ! Estimated noise=993.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317601 Jy ! Component: 100 - total flux cleaned = 0.0483988 Jy ! Component: 150 - total flux cleaned = 0.057681 Jy ! Component: 200 - total flux cleaned = 0.0630204 Jy ! Total flux subtracted in 200 components = 0.0630204 Jy ! Clean residual min=-0.013478 max=0.018199 Jy/beam ! Clean residual mean=-0.000028 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 0.390856 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 37 components and 0.390856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102728Jy sigma=0.000903 ! Fit after self-cal, rms=0.102738Jy sigma=0.000902 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.09 KP 1.06 ! LA 1.06 MK 1.01 NL 1.22 OV 0.94 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.21 KP 0.97 ! LA 1.05 MK 0.99 NL 1.30 OV 0.97 ! PT 1.03 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.15 KP 0.85 ! LA 0.82 MK 1.01 NL 1.22 OV 0.91 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.09 KP 0.79 ! LA 0.91 MK 1.01 NL 1.02 OV 0.97 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.102738Jy sigma=0.000902 ! Fit after self-cal, rms=0.089609Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=7.325 mas, bpa=2.432 degrees ! Estimated noise=994.284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054735 Jy ! Component: 100 - total flux cleaned = -0.000623974 Jy ! Component: 150 - total flux cleaned = -0.000622394 Jy ! Component: 200 - total flux cleaned = -0.000813358 Jy ! Total flux subtracted in 200 components = -0.000813358 Jy ! Clean residual min=-0.003753 max=0.003466 Jy/beam ! Clean residual mean=-0.000011 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.390042 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.390043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089480Jy sigma=0.000770 ! Fit after self-cal, rms=0.089572Jy sigma=0.000769 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089572Jy sigma=0.000769 ! Fit after self-cal, rms=0.089671Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.784 mas, bmaj=7.318 mas, bpa=2.367 degrees ! Estimated noise=992.932 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000622788 Jy ! Component: 100 - total flux cleaned = -0.000686814 Jy ! Component: 150 - total flux cleaned = -0.000739705 Jy ! Component: 200 - total flux cleaned = -0.000841048 Jy ! Total flux subtracted in 200 components = -0.000841048 Jy ! Clean residual min=-0.003614 max=0.003154 Jy/beam ! Clean residual mean=-0.000012 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.389201 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.389201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089590Jy sigma=0.000769 ! Fit after self-cal, rms=0.089590Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107977 Jy ! Component: 100 - total flux cleaned = -0.000240091 Jy ! Component: 150 - total flux cleaned = -0.0003219 Jy ! Component: 200 - total flux cleaned = -0.000399823 Jy ! Total flux subtracted in 200 components = -0.000399823 Jy ! Clean residual min=-0.003607 max=0.003042 Jy/beam ! Clean residual mean=-0.000013 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.388802 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.388802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089551Jy sigma=0.000768 ! Fit after self-cal, rms=0.089549Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089549Jy sigma=0.000768 ! Fit after self-cal, rms=0.089746Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.313 mas, bpa=2.324 degrees ! Estimated noise=992.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659354 Jy ! Component: 100 - total flux cleaned = -0.000660511 Jy ! Component: 150 - total flux cleaned = -0.00070196 Jy ! Component: 200 - total flux cleaned = -0.000739742 Jy ! Total flux subtracted in 200 components = -0.000739742 Jy ! Clean residual min=-0.003456 max=0.002916 Jy/beam ! Clean residual mean=-0.000014 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 0.388062 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.388062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089705Jy sigma=0.000768 ! Fit after self-cal, rms=0.089708Jy sigma=0.000768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.16649e-05 Jy ! Component: 100 - total flux cleaned = -0.000133818 Jy ! Component: 150 - total flux cleaned = -0.000221302 Jy ! Component: 200 - total flux cleaned = -0.000276547 Jy ! Total flux subtracted in 200 components = -0.000276547 Jy ! Clean residual min=-0.003471 max=0.002896 Jy/beam ! Clean residual mean=-0.000015 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.387785 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.387785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089687Jy sigma=0.000768 ! Fit after self-cal, rms=0.089686Jy sigma=0.000768 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089686Jy sigma=0.000768 ! Fit after self-cal, rms=0.089864Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.682 mas, bmaj=18.52 mas, bpa=7.796 degrees ! Estimated noise=1305.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044619 Jy ! Component: 100 - total flux cleaned = -0.00054525 Jy ! Component: 150 - total flux cleaned = -0.000631403 Jy ! Component: 200 - total flux cleaned = -0.000705616 Jy ! Total flux subtracted in 200 components = -0.000705616 Jy ! Clean residual min=-0.004353 max=0.002777 Jy/beam ! Clean residual mean=-0.000037 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.38708 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 53 components and 0.38708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089851Jy sigma=0.000767 ! Fit after self-cal, rms=0.089851Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0025e-05 Jy ! Component: 100 - total flux cleaned = -1.135e-05 Jy ! Component: 150 - total flux cleaned = -7.31493e-05 Jy ! Component: 200 - total flux cleaned = -0.000113671 Jy ! Total flux subtracted in 200 components = -0.000113671 Jy ! Clean residual min=-0.004326 max=0.002773 Jy/beam ! Clean residual mean=-0.000038 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.386966 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 53 components and 0.386966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089849Jy sigma=0.000768 ! Fit after self-cal, rms=0.089847Jy sigma=0.000768 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.312 mas, bpa=2.286 degrees ! Estimated noise=991.871 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.312 at 2.286 degrees (North through East) ! Clean map min=-0.0032349 max=0.34982 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.306 mas, bmaj=6.282 mas, bpa=3.409 degrees ! Estimated noise=1381.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270185 Jy ! Component: 100 - total flux cleaned = 0.329332 Jy ! Component: 150 - total flux cleaned = 0.350799 Jy ! Component: 200 - total flux cleaned = 0.363606 Jy ! Total flux subtracted in 200 components = 0.363606 Jy ! Clean residual min=-0.005445 max=0.007056 Jy/beam ! Clean residual mean=-0.000023 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.363605 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.363605 Jy ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.312 mas, bpa=2.286 degrees ! Estimated noise=991.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108563 Jy ! Component: 100 - total flux cleaned = 0.0162023 Jy ! Component: 150 - total flux cleaned = 0.0190968 Jy ! Component: 200 - total flux cleaned = 0.0207482 Jy ! Total flux subtracted in 200 components = 0.0207482 Jy ! Clean residual min=-0.003591 max=0.002895 Jy/beam ! Clean residual mean=-0.000022 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.384354 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 55 components and 0.384354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.682 mas, bmaj=18.52 mas, bpa=7.796 degrees ! Estimated noise=1305.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164004 Jy ! Component: 100 - total flux cleaned = 0.00213602 Jy ! Component: 150 - total flux cleaned = 0.00214619 Jy ! Component: 200 - total flux cleaned = 0.00215594 Jy ! Total flux subtracted in 200 components = 0.00215594 Jy ! Clean residual min=-0.004294 max=0.002991 Jy/beam ! Clean residual mean=-0.000040 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.38651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.55843e-06 Jy ! Component: 100 - total flux cleaned = 1.96436e-05 Jy ! Component: 150 - total flux cleaned = 2.03076e-05 Jy ! Component: 200 - total flux cleaned = 2.96445e-05 Jy ! Total flux subtracted in 200 components = 2.96445e-05 Jy ! Clean residual min=-0.004282 max=0.002990 Jy/beam ! Clean residual mean=-0.000040 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.386539 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.386539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.312 mas, bpa=2.286 degrees ! Estimated noise=991.871 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391677 Jy ! Component: 100 - total flux cleaned = -0.000266676 Jy ! Component: 150 - total flux cleaned = -0.000213172 Jy ! Component: 200 - total flux cleaned = -0.000198931 Jy ! Total flux subtracted in 200 components = -0.000198931 Jy ! Clean residual min=-0.003449 max=0.003001 Jy/beam ! Clean residual mean=-0.000017 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.38634 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.38634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089804Jy sigma=0.000767 ! Fit after self-cal, rms=0.089801Jy sigma=0.000767 wmodel J1339-2401_S_2015_01_22_pus_map.mod ! Writing 68 model components to file: J1339-2401_S_2015_01_22_pus_map.mod wobs J1339-2401_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1339-2401_S_2015_01_22_pus_uvs.fits wwins J1339-2401_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1339-2401_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000986181 Jy ! Component: 100 - total flux cleaned = -0.00138672 Jy ! Component: 150 - total flux cleaned = -0.00179807 Jy ! Component: 200 - total flux cleaned = -0.00221793 Jy ! Component: 250 - total flux cleaned = -0.00261018 Jy ! Component: 300 - total flux cleaned = -0.00294325 Jy ! Component: 350 - total flux cleaned = -0.00329722 Jy ! Component: 400 - total flux cleaned = -0.00363617 Jy ! Component: 450 - total flux cleaned = -0.00396171 Jy ! Component: 500 - total flux cleaned = -0.00427517 Jy ! Component: 550 - total flux cleaned = -0.00466934 Jy ! Component: 600 - total flux cleaned = -0.00499276 Jy ! Component: 650 - total flux cleaned = -0.00533624 Jy ! Component: 700 - total flux cleaned = -0.00564282 Jy ! Component: 750 - total flux cleaned = -0.00599563 Jy ! Component: 800 - total flux cleaned = -0.00631327 Jy ! Component: 850 - total flux cleaned = -0.00659804 Jy ! Component: 900 - total flux cleaned = -0.00687667 Jy ! Component: 950 - total flux cleaned = -0.00712421 Jy ! Component: 1000 - total flux cleaned = -0.00729355 Jy ! Component: 1050 - total flux cleaned = -0.00743601 Jy ! Component: 1100 - total flux cleaned = -0.00752911 Jy ! Component: 1150 - total flux cleaned = -0.00768893 Jy ! Component: 1200 - total flux cleaned = -0.00771139 Jy ! Component: 1250 - total flux cleaned = -0.00786627 Jy ! Component: 1300 - total flux cleaned = -0.00793124 Jy ! Component: 1350 - total flux cleaned = -0.00799536 Jy ! Component: 1400 - total flux cleaned = -0.00814168 Jy ! Component: 1450 - total flux cleaned = -0.00820335 Jy ! Component: 1500 - total flux cleaned = -0.00826386 Jy ! Component: 1550 - total flux cleaned = -0.00832376 Jy ! Component: 1600 - total flux cleaned = -0.00838285 Jy ! Component: 1650 - total flux cleaned = -0.00846013 Jy ! Component: 1700 - total flux cleaned = -0.00842172 Jy ! Component: 1750 - total flux cleaned = -0.00849711 Jy ! Component: 1800 - total flux cleaned = -0.00855271 Jy ! Component: 1850 - total flux cleaned = -0.00857104 Jy ! Component: 1900 - total flux cleaned = -0.00862517 Jy ! Component: 1950 - total flux cleaned = -0.00862497 Jy ! Component: 2000 - total flux cleaned = -0.00867794 Jy ! Component: 2050 - total flux cleaned = -0.0087127 Jy ! Component: 2100 - total flux cleaned = -0.00878164 Jy ! Component: 2150 - total flux cleaned = -0.00881583 Jy ! Component: 2200 - total flux cleaned = -0.00891705 Jy ! Component: 2250 - total flux cleaned = -0.00895053 Jy ! Component: 2300 - total flux cleaned = -0.00908299 Jy ! Component: 2350 - total flux cleaned = -0.00918153 Jy ! Component: 2400 - total flux cleaned = -0.00923059 Jy ! Component: 2450 - total flux cleaned = -0.00931148 Jy ! Component: 2500 - total flux cleaned = -0.00940755 Jy ! Component: 2550 - total flux cleaned = -0.00947107 Jy ! Component: 2600 - total flux cleaned = -0.00953398 Jy ! Component: 2650 - total flux cleaned = -0.00953407 Jy ! Component: 2700 - total flux cleaned = -0.00958082 Jy ! Component: 2750 - total flux cleaned = -0.00964256 Jy ! Component: 2800 - total flux cleaned = -0.00973446 Jy ! Component: 2850 - total flux cleaned = -0.00978011 Jy ! Component: 2900 - total flux cleaned = -0.00981039 Jy ! Component: 2950 - total flux cleaned = -0.00988563 Jy ! Component: 3000 - total flux cleaned = -0.0099305 Jy ! Component: 3050 - total flux cleaned = -0.0100196 Jy ! Component: 3100 - total flux cleaned = -0.0100197 Jy ! Component: 3150 - total flux cleaned = -0.0100637 Jy ! Component: 3200 - total flux cleaned = -0.0100783 Jy ! Component: 3250 - total flux cleaned = -0.010151 Jy ! Component: 3300 - total flux cleaned = -0.01018 Jy ! Component: 3350 - total flux cleaned = -0.0101369 Jy ! Component: 3400 - total flux cleaned = -0.0101656 Jy ! Component: 3450 - total flux cleaned = -0.0102083 Jy ! Component: 3500 - total flux cleaned = -0.0101516 Jy ! Component: 3550 - total flux cleaned = -0.0101657 Jy ! Component: 3600 - total flux cleaned = -0.0101517 Jy ! Component: 3650 - total flux cleaned = -0.0101378 Jy ! Component: 3700 - total flux cleaned = -0.0101101 Jy ! Component: 3750 - total flux cleaned = -0.0101101 Jy ! Component: 3800 - total flux cleaned = -0.0100688 Jy ! Component: 3850 - total flux cleaned = -0.0100414 Jy ! Component: 3900 - total flux cleaned = -0.0100003 Jy ! Component: 3950 - total flux cleaned = -0.00995938 Jy ! Component: 4000 - total flux cleaned = -0.00991867 Jy ! Component: 4050 - total flux cleaned = -0.00990511 Jy ! Total flux subtracted in 4096 components = -0.00989165 Jy ! Clean residual min=-0.000854 max=0.000803 Jy/beam ! Clean residual mean=-0.000003 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.376449 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 330 components and 0.376448 Jy ![Exited script file: muppet] wmap "J1339-2401_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.312 at 2.286 degrees (North through East) ! Clean map min=-0.0024786 max=0.35007 Jy/beam ! Writing clean map to FITS file: J1339-2401_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.350068 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000246007 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.210822 0.210822 0.421644 0.843288 1.68658 3.37315 6.74631 13.4926 26.9852 53.9705 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.35 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.312 at 2.286 degrees (North through East) ! Clean map min=-0.0024786 max=0.35007 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1339-2401_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:55:19 2017