! Started logfile: J1336-1852_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:55:05 2017 obs J1336-1852_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1336-1852_S_2015_01_22_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.618605 visibilities/baseline/integration-bin. ! Found source: J1336-1852 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4788 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1336-1852_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.779288Jy sigma=0.007317 ! Fit after self-cal, rms=0.738504Jy sigma=0.006979 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=6.663 mas, bpa=6.81 degrees ! Estimated noise=2083.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233509 Jy ! Component: 100 - total flux cleaned = 0.309479 Jy ! Total flux subtracted in 100 components = 0.309479 Jy ! Clean residual min=-0.021929 max=0.050789 Jy/beam ! Clean residual mean=0.000155 rms=0.008630 Jy/beam ! Combined flux in latest and established models = 0.309479 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.309479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138622Jy sigma=0.001168 ! Fit after self-cal, rms=0.137906Jy sigma=0.001165 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=7.947 mas, bpa=3.761 degrees ! Estimated noise=1082.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (37, -61). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0512396 Jy ! Component: 100 - total flux cleaned = 0.0753985 Jy ! Component: 150 - total flux cleaned = 0.0894575 Jy ! Component: 200 - total flux cleaned = 0.0980457 Jy ! Total flux subtracted in 200 components = 0.0980457 Jy ! Clean residual min=-0.011502 max=0.020131 Jy/beam ! Clean residual mean=-0.000019 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 0.407525 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 38 components and 0.407525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118184Jy sigma=0.000940 ! Fit after self-cal, rms=0.116840Jy sigma=0.000923 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00* HN 1.00* KP 1.09 ! LA 1.05 MK 0.97 NL 1.38 OV 1.00 ! PT 1.07 SC 1.25 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00* KP 1.02 ! LA 1.04 MK 1.00 NL 1.18 OV 1.03 ! PT 1.05 SC 1.17 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.00* KP 0.87 ! LA 0.82 MK 1.04 NL 0.94 OV 0.96 ! PT 1.03 SC 1.38 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 0.80 ! LA 0.88 MK 1.03 NL 0.82 OV 1.00 ! PT 1.04 SC 1.50 ! ! ! Fit before self-cal, rms=0.116840Jy sigma=0.000923 ! Fit after self-cal, rms=0.121246Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=8.403 mas, bpa=1.194 degrees ! Estimated noise=1110.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432962 Jy ! Component: 100 - total flux cleaned = -0.00647529 Jy ! Component: 150 - total flux cleaned = -0.00683393 Jy ! Component: 200 - total flux cleaned = -0.00715001 Jy ! Total flux subtracted in 200 components = -0.00715001 Jy ! Clean residual min=-0.005410 max=0.005052 Jy/beam ! Clean residual mean=0.000014 rms=0.001526 Jy/beam ! Combined flux in latest and established models = 0.400375 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 0.400375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121038Jy sigma=0.000765 ! Fit after self-cal, rms=0.120977Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120977Jy sigma=0.000765 ! Fit after self-cal, rms=0.119320Jy sigma=0.000764 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=8.367 mas, bpa=1.404 degrees ! Estimated noise=1107.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309222 Jy ! Component: 100 - total flux cleaned = -0.00401431 Jy ! Component: 150 - total flux cleaned = -0.00427041 Jy ! Component: 200 - total flux cleaned = -0.00438472 Jy ! Total flux subtracted in 200 components = -0.00438472 Jy ! Clean residual min=-0.004892 max=0.004797 Jy/beam ! Clean residual mean=0.000015 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.39599 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.39599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119205Jy sigma=0.000763 ! Fit after self-cal, rms=0.119180Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000260919 Jy ! Component: 100 - total flux cleaned = -0.000420972 Jy ! Component: 150 - total flux cleaned = -0.000565172 Jy ! Component: 200 - total flux cleaned = -0.000653323 Jy ! Total flux subtracted in 200 components = -0.000653323 Jy ! Clean residual min=-0.005024 max=0.004881 Jy/beam ! Clean residual mean=0.000017 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.395337 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.395337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119128Jy sigma=0.000763 ! Fit after self-cal, rms=0.119114Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119114Jy sigma=0.000763 ! Fit after self-cal, rms=0.117658Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.61 mas, bmaj=8.331 mas, bpa=1.601 degrees ! Estimated noise=1106.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231817 Jy ! Component: 100 - total flux cleaned = -0.00285268 Jy ! Component: 150 - total flux cleaned = -0.00300056 Jy ! Component: 200 - total flux cleaned = -0.00318376 Jy ! Total flux subtracted in 200 components = -0.00318376 Jy ! Clean residual min=-0.004833 max=0.004547 Jy/beam ! Clean residual mean=0.000012 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.392153 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 0.392153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117581Jy sigma=0.000761 ! Fit after self-cal, rms=0.117553Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224781 Jy ! Component: 100 - total flux cleaned = -0.000400508 Jy ! Component: 150 - total flux cleaned = -0.000563823 Jy ! Component: 200 - total flux cleaned = -0.000677618 Jy ! Total flux subtracted in 200 components = -0.000677618 Jy ! Clean residual min=-0.004905 max=0.004602 Jy/beam ! Clean residual mean=0.000015 rms=0.001322 Jy/beam ! Combined flux in latest and established models = 0.391476 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.391476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117515Jy sigma=0.000761 ! Fit after self-cal, rms=0.117500Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117500Jy sigma=0.000761 ! Fit after self-cal, rms=0.116794Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.136 mas, bmaj=17.13 mas, bpa=13.93 degrees ! Estimated noise=1283.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00242054 Jy ! Component: 100 - total flux cleaned = -0.00320651 Jy ! Component: 150 - total flux cleaned = -0.00355051 Jy ! Component: 200 - total flux cleaned = -0.00384789 Jy ! Total flux subtracted in 200 components = -0.00384789 Jy ! Clean residual min=-0.005644 max=0.004438 Jy/beam ! Clean residual mean=0.000030 rms=0.001683 Jy/beam ! Combined flux in latest and established models = 0.387628 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 96 components and 0.387628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116749Jy sigma=0.000760 ! Fit after self-cal, rms=0.116729Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150537 Jy ! Component: 100 - total flux cleaned = -0.00036166 Jy ! Component: 150 - total flux cleaned = -0.000425792 Jy ! Component: 200 - total flux cleaned = -0.000456403 Jy ! Total flux subtracted in 200 components = -0.000456403 Jy ! Clean residual min=-0.005559 max=0.004422 Jy/beam ! Clean residual mean=0.000034 rms=0.001651 Jy/beam ! Combined flux in latest and established models = 0.387171 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 0.387171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116712Jy sigma=0.000760 ! Fit after self-cal, rms=0.116706Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=8.309 mas, bpa=1.726 degrees ! Estimated noise=1105.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 8.309 at 1.726 degrees (North through East) ! Clean map min=-0.0046178 max=0.28362 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=6.9 mas, bpa=4.205 degrees ! Estimated noise=2168.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238901 Jy ! Component: 100 - total flux cleaned = 0.31767 Jy ! Component: 150 - total flux cleaned = 0.3504 Jy ! Component: 200 - total flux cleaned = 0.367812 Jy ! Total flux subtracted in 200 components = 0.367812 Jy ! Clean residual min=-0.009401 max=0.010831 Jy/beam ! Clean residual mean=0.000035 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.367812 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.367812 Jy ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=8.309 mas, bpa=1.726 degrees ! Estimated noise=1105.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, 22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01353 Jy ! Component: 100 - total flux cleaned = 0.0207149 Jy ! Component: 150 - total flux cleaned = 0.0224338 Jy ! Component: 200 - total flux cleaned = 0.0224507 Jy ! Total flux subtracted in 200 components = 0.0224507 Jy ! Clean residual min=-0.005672 max=0.004451 Jy/beam ! Clean residual mean=0.000003 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.390262 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 53 components and 0.390262 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.136 mas, bmaj=17.13 mas, bpa=13.93 degrees ! Estimated noise=1283.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000957628 Jy ! Component: 100 - total flux cleaned = -0.00139894 Jy ! Component: 150 - total flux cleaned = -0.00168528 Jy ! Component: 200 - total flux cleaned = -0.00177019 Jy ! Total flux subtracted in 200 components = -0.00177019 Jy ! Clean residual min=-0.005727 max=0.004464 Jy/beam ! Clean residual mean=0.000020 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 0.388492 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.38653e-05 Jy ! Component: 100 - total flux cleaned = -0.000136997 Jy ! Component: 150 - total flux cleaned = -0.000195491 Jy ! Component: 200 - total flux cleaned = -0.000291207 Jy ! Total flux subtracted in 200 components = -0.000291207 Jy ! Clean residual min=-0.005099 max=0.004572 Jy/beam ! Clean residual mean=0.000022 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.388201 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.388201 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.607 mas, bmaj=8.309 mas, bpa=1.726 degrees ! Estimated noise=1105.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010096 Jy ! Component: 100 - total flux cleaned = 0.0012579 Jy ! Component: 150 - total flux cleaned = 0.00133408 Jy ! Component: 200 - total flux cleaned = 0.00133519 Jy ! Total flux subtracted in 200 components = 0.00133519 Jy ! Clean residual min=-0.004190 max=0.004386 Jy/beam ! Clean residual mean=0.000007 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.389536 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 82 components and 0.389536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116937Jy sigma=0.000758 ! Fit after self-cal, rms=0.116762Jy sigma=0.000757 wmodel J1336-1852_S_2015_01_22_pus_map.mod ! Writing 82 model components to file: J1336-1852_S_2015_01_22_pus_map.mod wobs J1336-1852_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1336-1852_S_2015_01_22_pus_uvs.fits wwins J1336-1852_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1336-1852_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133503 Jy ! Component: 100 - total flux cleaned = -0.000814693 Jy ! Component: 150 - total flux cleaned = -0.00125498 Jy ! Component: 200 - total flux cleaned = -0.00131617 Jy ! Component: 250 - total flux cleaned = -0.00137002 Jy ! Component: 300 - total flux cleaned = -0.00156652 Jy ! Component: 350 - total flux cleaned = -0.00161193 Jy ! Component: 400 - total flux cleaned = -0.00161323 Jy ! Component: 450 - total flux cleaned = -0.00182891 Jy ! Component: 500 - total flux cleaned = -0.0020743 Jy ! Component: 550 - total flux cleaned = -0.00207459 Jy ! Component: 600 - total flux cleaned = -0.00218902 Jy ! Component: 650 - total flux cleaned = -0.00237297 Jy ! Component: 700 - total flux cleaned = -0.00226479 Jy ! Component: 750 - total flux cleaned = -0.0021256 Jy ! Component: 800 - total flux cleaned = -0.0019553 Jy ! Component: 850 - total flux cleaned = -0.00178813 Jy ! Component: 900 - total flux cleaned = -0.00146108 Jy ! Component: 950 - total flux cleaned = -0.00133443 Jy ! Component: 1000 - total flux cleaned = -0.00108342 Jy ! Component: 1050 - total flux cleaned = -0.000960296 Jy ! Component: 1100 - total flux cleaned = -0.000688194 Jy ! Component: 1150 - total flux cleaned = -0.000539379 Jy ! Component: 1200 - total flux cleaned = -0.00030605 Jy ! Component: 1250 - total flux cleaned = -0.000134568 Jy ! Component: 1300 - total flux cleaned = 6.12865e-06 Jy ! Component: 1350 - total flux cleaned = 0.00014438 Jy ! Component: 1400 - total flux cleaned = 0.000307885 Jy ! Component: 1450 - total flux cleaned = 0.000388256 Jy ! Component: 1500 - total flux cleaned = 0.000599621 Jy ! Component: 1550 - total flux cleaned = 0.00072988 Jy ! Component: 1600 - total flux cleaned = 0.000935419 Jy ! Component: 1650 - total flux cleaned = 0.00106208 Jy ! Component: 1700 - total flux cleaned = 0.00121205 Jy ! Component: 1750 - total flux cleaned = 0.00123655 Jy ! Component: 1800 - total flux cleaned = 0.001383 Jy ! Component: 1850 - total flux cleaned = 0.00147918 Jy ! Component: 1900 - total flux cleaned = 0.00152688 Jy ! Component: 1950 - total flux cleaned = 0.00157412 Jy ! Component: 2000 - total flux cleaned = 0.00162097 Jy ! Component: 2050 - total flux cleaned = 0.00162091 Jy ! Component: 2100 - total flux cleaned = 0.00157518 Jy ! Component: 2150 - total flux cleaned = 0.00152982 Jy ! Component: 2200 - total flux cleaned = 0.00150748 Jy ! Component: 2250 - total flux cleaned = 0.00144083 Jy ! Component: 2300 - total flux cleaned = 0.0014409 Jy ! Component: 2350 - total flux cleaned = 0.00141932 Jy ! Component: 2400 - total flux cleaned = 0.00135448 Jy ! Component: 2450 - total flux cleaned = 0.00135454 Jy ! Component: 2500 - total flux cleaned = 0.00129032 Jy ! Component: 2550 - total flux cleaned = 0.00126914 Jy ! Component: 2600 - total flux cleaned = 0.00118515 Jy ! Component: 2650 - total flux cleaned = 0.00118516 Jy ! Component: 2700 - total flux cleaned = 0.00112302 Jy ! Component: 2750 - total flux cleaned = 0.00110233 Jy ! Component: 2800 - total flux cleaned = 0.00108173 Jy ! Component: 2850 - total flux cleaned = 0.00106125 Jy ! Component: 2900 - total flux cleaned = 0.0010411 Jy ! Component: 2950 - total flux cleaned = 0.0010613 Jy ! Component: 3000 - total flux cleaned = 0.00106138 Jy ! Component: 3050 - total flux cleaned = 0.0011013 Jy ! Component: 3100 - total flux cleaned = 0.00112116 Jy ! Component: 3150 - total flux cleaned = 0.00114095 Jy ! Component: 3200 - total flux cleaned = 0.00116062 Jy ! Component: 3250 - total flux cleaned = 0.00121908 Jy ! Component: 3300 - total flux cleaned = 0.00121887 Jy ! Component: 3350 - total flux cleaned = 0.00119947 Jy ! Component: 3400 - total flux cleaned = 0.00121884 Jy ! Component: 3450 - total flux cleaned = 0.00118029 Jy ! Component: 3500 - total flux cleaned = 0.00119948 Jy ! Component: 3550 - total flux cleaned = 0.00114198 Jy ! Component: 3600 - total flux cleaned = 0.00116102 Jy ! Component: 3650 - total flux cleaned = 0.00110392 Jy ! Component: 3700 - total flux cleaned = 0.00106588 Jy ! Component: 3750 - total flux cleaned = 0.00110391 Jy ! Component: 3800 - total flux cleaned = 0.00114185 Jy ! Component: 3850 - total flux cleaned = 0.00112281 Jy ! Component: 3900 - total flux cleaned = 0.00110388 Jy ! Component: 3950 - total flux cleaned = 0.00106601 Jy ! Component: 4000 - total flux cleaned = 0.00104714 Jy ! Component: 4050 - total flux cleaned = 0.00102832 Jy ! Total flux subtracted in 4096 components = 0.000971574 Jy ! Clean residual min=-0.001117 max=0.001164 Jy/beam ! Clean residual mean=0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.390508 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 325 components and 0.390508 Jy ![Exited script file: muppet] wmap "J1336-1852_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 8.309 at 1.726 degrees (North through East) ! Clean map min=-0.0033562 max=0.28275 Jy/beam ! Writing clean map to FITS file: J1336-1852_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.282754 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.365055 0.365055 0.730111 1.46022 2.92044 5.84088 11.6818 23.3635 46.7271 93.4541 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.282 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.607 x 8.309 at 1.726 degrees (North through East) ! Clean map min=-0.0033562 max=0.28275 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1336-1852_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:55:12 2017