! Started logfile: J1334-1150_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:59 2017 obs J1334-1150_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1334-1150_S_2015_01_22_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.622222 visibilities/baseline/integration-bin. ! Found source: J1334-1150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4816 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1334-1150_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 86 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.862649Jy sigma=0.009080 ! Fit after self-cal, rms=0.852959Jy sigma=0.008975 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=12.83 mas, bpa=-13.77 degrees ! Estimated noise=1418.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113017 Jy ! Component: 100 - total flux cleaned = 0.150059 Jy ! Total flux subtracted in 100 components = 0.150059 Jy ! Clean residual min=-0.013179 max=0.025006 Jy/beam ! Clean residual mean=0.000097 rms=0.005204 Jy/beam ! Combined flux in latest and established models = 0.150059 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.150059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102066Jy sigma=0.000939 ! Fit after self-cal, rms=0.101918Jy sigma=0.000938 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.76 mas, bmaj=13.52 mas, bpa=-12.41 degrees ! Estimated noise=998.998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233007 Jy ! Component: 100 - total flux cleaned = 0.0348432 Jy ! Component: 150 - total flux cleaned = 0.0380314 Jy ! Component: 200 - total flux cleaned = 0.0392006 Jy ! Total flux subtracted in 200 components = 0.0392006 Jy ! Clean residual min=-0.011885 max=0.024220 Jy/beam ! Clean residual mean=0.000109 rms=0.004514 Jy/beam ! Combined flux in latest and established models = 0.18926 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 52 components and 0.18926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096727Jy sigma=0.000877 ! Fit after self-cal, rms=0.096652Jy sigma=0.000876 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.37 KP 1.02 ! LA 0.95 MK 0.94 NL 1.34 OV 0.89 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.64 KP 0.92 ! LA 0.95 MK 0.95 NL 1.65 OV 0.93 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.38 KP 0.83 ! LA 0.76 MK 0.97 NL 1.50 OV 0.83 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.45 KP 0.74 ! LA 0.83 MK 0.98 NL 1.07 OV 0.92 ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.096652Jy sigma=0.000876 ! Fit after self-cal, rms=0.104508Jy sigma=0.000776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.813 mas, bmaj=13.36 mas, bpa=-12.9 degrees ! Estimated noise=1001.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105632 Jy ! Component: 100 - total flux cleaned = 0.00110076 Jy ! Component: 150 - total flux cleaned = 0.00106222 Jy ! Component: 200 - total flux cleaned = 0.00102647 Jy ! Total flux subtracted in 200 components = 0.00102647 Jy ! Clean residual min=-0.004558 max=0.006443 Jy/beam ! Clean residual mean=0.000002 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.190287 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.190287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104473Jy sigma=0.000776 ! Fit after self-cal, rms=0.105108Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105108Jy sigma=0.000774 ! Fit after self-cal, rms=0.105985Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.804 mas, bmaj=13.34 mas, bpa=-12.94 degrees ! Estimated noise=1001.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813252 Jy ! Component: 100 - total flux cleaned = 0.000778777 Jy ! Component: 150 - total flux cleaned = 0.000717181 Jy ! Component: 200 - total flux cleaned = 0.000690646 Jy ! Total flux subtracted in 200 components = 0.000690646 Jy ! Clean residual min=-0.004706 max=0.005745 Jy/beam ! Clean residual mean=0.000003 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.190977 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 75 components and 0.190977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105962Jy sigma=0.000774 ! Fit after self-cal, rms=0.105974Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335393 Jy ! Component: 100 - total flux cleaned = 0.00471589 Jy ! Component: 150 - total flux cleaned = 0.00569361 Jy ! Component: 200 - total flux cleaned = 0.00647262 Jy ! Total flux subtracted in 200 components = 0.00647262 Jy ! Clean residual min=-0.003903 max=0.003859 Jy/beam ! Clean residual mean=0.000008 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.19745 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 0.19745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105566Jy sigma=0.000771 ! Fit after self-cal, rms=0.105540Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105540Jy sigma=0.000771 ! Fit after self-cal, rms=0.104854Jy sigma=0.000771 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=13.33 mas, bpa=-12.97 degrees ! Estimated noise=993.896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000188268 Jy ! Component: 100 - total flux cleaned = 0.000625185 Jy ! Component: 150 - total flux cleaned = 0.00125704 Jy ! Component: 200 - total flux cleaned = 0.00159271 Jy ! Total flux subtracted in 200 components = 0.00159271 Jy ! Clean residual min=-0.003497 max=0.003282 Jy/beam ! Clean residual mean=0.000004 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.199043 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 134 components and 0.199043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104751Jy sigma=0.000770 ! Fit after self-cal, rms=0.104765Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000252726 Jy ! Component: 100 - total flux cleaned = 9.59471e-05 Jy ! Component: 150 - total flux cleaned = 0.000299576 Jy ! Component: 200 - total flux cleaned = 0.000330803 Jy ! Total flux subtracted in 200 components = 0.000330803 Jy ! Clean residual min=-0.003286 max=0.003326 Jy/beam ! Clean residual mean=0.000004 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.199373 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 146 components and 0.199373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104721Jy sigma=0.000770 ! Fit after self-cal, rms=0.104726Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104726Jy sigma=0.000770 ! Fit after self-cal, rms=0.104393Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=16.57 mas, bpa=7.403 degrees ! Estimated noise=1184.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336098 Jy ! Component: 100 - total flux cleaned = 0.000825835 Jy ! Component: 150 - total flux cleaned = 0.000952511 Jy ! Component: 200 - total flux cleaned = 0.00108952 Jy ! Total flux subtracted in 200 components = 0.00108952 Jy ! Clean residual min=-0.003311 max=0.003736 Jy/beam ! Clean residual mean=-0.000001 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.200463 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 159 components and 0.200463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104366Jy sigma=0.000770 ! Fit after self-cal, rms=0.104376Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.43728e-05 Jy ! Component: 100 - total flux cleaned = -2.90358e-05 Jy ! Component: 150 - total flux cleaned = 9.17014e-05 Jy ! Component: 200 - total flux cleaned = 0.00019643 Jy ! Total flux subtracted in 200 components = 0.00019643 Jy ! Clean residual min=-0.003160 max=0.003789 Jy/beam ! Clean residual mean=-0.000002 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 0.200659 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 168 components and 0.200659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104369Jy sigma=0.000770 ! Fit after self-cal, rms=0.104371Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=13.31 mas, bpa=-12.99 degrees ! Estimated noise=990.104 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 13.31 at -12.99 degrees (North through East) ! Clean map min=-0.0072931 max=0.13185 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=12.8 mas, bpa=-14.4 degrees ! Estimated noise=1391.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11105 Jy ! Component: 100 - total flux cleaned = 0.149062 Jy ! Component: 150 - total flux cleaned = 0.167113 Jy ! Component: 200 - total flux cleaned = 0.176671 Jy ! Total flux subtracted in 200 components = 0.176671 Jy ! Clean residual min=-0.006654 max=0.006898 Jy/beam ! Clean residual mean=0.000010 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 0.176671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.176671 Jy ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=13.31 mas, bpa=-12.99 degrees ! Estimated noise=990.104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00526344 Jy ! Component: 100 - total flux cleaned = 0.00809429 Jy ! Component: 150 - total flux cleaned = 0.00977255 Jy ! Component: 200 - total flux cleaned = 0.0111943 Jy ! Total flux subtracted in 200 components = 0.0111943 Jy ! Clean residual min=-0.004122 max=0.004951 Jy/beam ! Clean residual mean=0.000019 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 0.187866 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 70 components and 0.187866 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.261 mas, bmaj=16.57 mas, bpa=7.403 degrees ! Estimated noise=1184.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316135 Jy ! Component: 100 - total flux cleaned = 0.00435256 Jy ! Component: 150 - total flux cleaned = 0.00535156 Jy ! Component: 200 - total flux cleaned = 0.00601282 Jy ! Total flux subtracted in 200 components = 0.00601282 Jy ! Clean residual min=-0.003754 max=0.004780 Jy/beam ! Clean residual mean=0.000015 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.193879 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000739884 Jy ! Component: 100 - total flux cleaned = 0.00124074 Jy ! Component: 150 - total flux cleaned = 0.0016821 Jy ! Component: 200 - total flux cleaned = 0.00212563 Jy ! Total flux subtracted in 200 components = 0.00212563 Jy ! Clean residual min=-0.003538 max=0.004067 Jy/beam ! Clean residual mean=0.000011 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 0.196004 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 123 components and 0.196004 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=13.31 mas, bpa=-12.99 degrees ! Estimated noise=990.104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140093 Jy ! Component: 100 - total flux cleaned = 0.000205744 Jy ! Component: 150 - total flux cleaned = 0.000371007 Jy ! Component: 200 - total flux cleaned = 0.000611707 Jy ! Total flux subtracted in 200 components = 0.000611707 Jy ! Clean residual min=-0.003182 max=0.003286 Jy/beam ! Clean residual mean=0.000008 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.196616 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 156 components and 0.196616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104494Jy sigma=0.000770 ! Fit after self-cal, rms=0.104494Jy sigma=0.000770 wmodel J1334-1150_S_2015_01_22_pus_map.mod ! Writing 156 model components to file: J1334-1150_S_2015_01_22_pus_map.mod wobs J1334-1150_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1334-1150_S_2015_01_22_pus_uvs.fits wwins J1334-1150_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1334-1150_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.1964e-05 Jy ! Component: 100 - total flux cleaned = 0.000116209 Jy ! Component: 150 - total flux cleaned = 0.000165698 Jy ! Component: 200 - total flux cleaned = 0.000305618 Jy ! Component: 250 - total flux cleaned = 0.00052702 Jy ! Component: 300 - total flux cleaned = 0.000737621 Jy ! Component: 350 - total flux cleaned = 0.000936916 Jy ! Component: 400 - total flux cleaned = 0.00108894 Jy ! Component: 450 - total flux cleaned = 0.00119882 Jy ! Component: 500 - total flux cleaned = 0.00116515 Jy ! Component: 550 - total flux cleaned = 0.00113194 Jy ! Component: 600 - total flux cleaned = 0.00100141 Jy ! Component: 650 - total flux cleaned = 0.000939192 Jy ! Component: 700 - total flux cleaned = 0.000847196 Jy ! Component: 750 - total flux cleaned = 0.00072824 Jy ! Component: 800 - total flux cleaned = 0.000555423 Jy ! Component: 850 - total flux cleaned = 0.000500073 Jy ! Component: 900 - total flux cleaned = 0.000445923 Jy ! Component: 950 - total flux cleaned = 0.000393299 Jy ! Component: 1000 - total flux cleaned = 0.000368202 Jy ! Component: 1050 - total flux cleaned = 0.00039338 Jy ! Component: 1100 - total flux cleaned = 0.000342991 Jy ! Component: 1150 - total flux cleaned = 0.00029426 Jy ! Component: 1200 - total flux cleaned = 0.000270488 Jy ! Component: 1250 - total flux cleaned = 0.000270042 Jy ! Component: 1300 - total flux cleaned = 0.000246811 Jy ! Component: 1350 - total flux cleaned = 0.000246645 Jy ! Component: 1400 - total flux cleaned = 0.000246626 Jy ! Component: 1450 - total flux cleaned = 0.000268636 Jy ! Component: 1500 - total flux cleaned = 0.000247297 Jy ! Component: 1550 - total flux cleaned = 0.000226624 Jy ! Component: 1600 - total flux cleaned = 0.000267511 Jy ! Component: 1650 - total flux cleaned = 0.000327527 Jy ! Component: 1700 - total flux cleaned = 0.0003475 Jy ! Component: 1750 - total flux cleaned = 0.000426268 Jy ! Component: 1800 - total flux cleaned = 0.000465095 Jy ! Component: 1850 - total flux cleaned = 0.000522691 Jy ! Component: 1900 - total flux cleaned = 0.000579399 Jy ! Component: 1950 - total flux cleaned = 0.0006168 Jy ! Component: 2000 - total flux cleaned = 0.000635276 Jy ! Component: 2050 - total flux cleaned = 0.000690034 Jy ! Component: 2100 - total flux cleaned = 0.000726154 Jy ! Component: 2150 - total flux cleaned = 0.00070847 Jy ! Component: 2200 - total flux cleaned = 0.000779137 Jy ! Component: 2250 - total flux cleaned = 0.000779128 Jy ! Component: 2300 - total flux cleaned = 0.00083104 Jy ! Component: 2350 - total flux cleaned = 0.000848232 Jy ! Component: 2400 - total flux cleaned = 0.000882168 Jy ! Component: 2450 - total flux cleaned = 0.000898956 Jy ! Component: 2500 - total flux cleaned = 0.000899062 Jy ! Component: 2550 - total flux cleaned = 0.000931897 Jy ! Component: 2600 - total flux cleaned = 0.000915784 Jy ! Component: 2650 - total flux cleaned = 0.000931971 Jy ! Component: 2700 - total flux cleaned = 0.00094785 Jy ! Component: 2750 - total flux cleaned = 0.000963641 Jy ! Component: 2800 - total flux cleaned = 0.000901019 Jy ! Component: 2850 - total flux cleaned = 0.000947531 Jy ! Component: 2900 - total flux cleaned = 0.000870518 Jy ! Component: 2950 - total flux cleaned = 0.000901017 Jy ! Component: 3000 - total flux cleaned = 0.000886051 Jy ! Component: 3050 - total flux cleaned = 0.000930889 Jy ! Component: 3100 - total flux cleaned = 0.000915983 Jy ! Component: 3150 - total flux cleaned = 0.000901186 Jy ! Component: 3200 - total flux cleaned = 0.000930691 Jy ! Component: 3250 - total flux cleaned = 0.000945259 Jy ! Component: 3300 - total flux cleaned = 0.000959817 Jy ! Component: 3350 - total flux cleaned = 0.000959825 Jy ! Component: 3400 - total flux cleaned = 0.00103182 Jy ! Component: 3450 - total flux cleaned = 0.00101753 Jy ! Component: 3500 - total flux cleaned = 0.00101743 Jy ! Component: 3550 - total flux cleaned = 0.00103171 Jy ! Component: 3600 - total flux cleaned = 0.00100342 Jy ! Component: 3650 - total flux cleaned = 0.00101749 Jy ! Component: 3700 - total flux cleaned = 0.00103157 Jy ! Component: 3750 - total flux cleaned = 0.00105969 Jy ! Component: 3800 - total flux cleaned = 0.00107371 Jy ! Component: 3850 - total flux cleaned = 0.00108775 Jy ! Component: 3900 - total flux cleaned = 0.00112974 Jy ! Component: 3950 - total flux cleaned = 0.0011717 Jy ! Component: 4000 - total flux cleaned = 0.00119957 Jy ! Component: 4050 - total flux cleaned = 0.00119961 Jy ! Total flux subtracted in 4096 components = 0.00121361 Jy ! Clean residual min=-0.000804 max=0.000764 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.197829 Jy keep ! Adding 330 model components to the UV plane model. ! The established model now contains 486 components and 0.197829 Jy ![Exited script file: muppet] wmap "J1334-1150_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 13.31 at -12.99 degrees (North through East) ! Clean map min=-0.0073954 max=0.13685 Jy/beam ! Writing clean map to FITS file: J1334-1150_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.136854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254246 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.557335 0.557335 1.11467 2.22934 4.45868 8.91736 17.8347 35.6694 71.3389 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.136 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.785 x 13.31 at -12.99 degrees (North through East) ! Clean map min=-0.0073954 max=0.13685 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1334-1150_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:55:05 2017