! Started logfile: J1333-2356_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:51 2017 obs J1333-2356_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1333-2356_S_2015_01_22_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1333-2356 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8928 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1333-2356_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.933581Jy sigma=0.009141 ! Fit after self-cal, rms=0.916779Jy sigma=0.009000 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.255 mas, bmaj=6.379 mas, bpa=0.699 degrees ! Estimated noise=1464.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0626536 Jy ! Component: 100 - total flux cleaned = 0.0803719 Jy ! Total flux subtracted in 100 components = 0.0803719 Jy ! Clean residual min=-0.005997 max=0.009846 Jy/beam ! Clean residual mean=-0.000021 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 0.0803719 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0803719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089751Jy sigma=0.000787 ! Fit after self-cal, rms=0.089633Jy sigma=0.000786 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=7.494 mas, bpa=1.759 degrees ! Estimated noise=793.932 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21, 48.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123575 Jy ! Component: 100 - total flux cleaned = 0.0192707 Jy ! Component: 150 - total flux cleaned = 0.0236391 Jy ! Component: 200 - total flux cleaned = 0.0265655 Jy ! Total flux subtracted in 200 components = 0.0265655 Jy ! Clean residual min=-0.003281 max=0.003863 Jy/beam ! Clean residual mean=0.000006 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.106937 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 64 components and 0.106937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087781Jy sigma=0.000768 ! Fit after self-cal, rms=0.087691Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 1.08 KP 1.05 ! LA 1.08 MK 1.09 NL 1.16 OV 0.97 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.17 KP 0.99 ! LA 1.01 MK 0.95 NL 1.13 OV 1.02 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.05 KP 0.86 ! LA 0.81 MK 1.12 NL 0.99 OV 0.95 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.11 KP 0.78 ! LA 0.91 MK 0.96 NL 0.91 OV 0.94 ! PT 1.04 SC 1.02 ! ! ! Fit before self-cal, rms=0.087691Jy sigma=0.000767 ! Fit after self-cal, rms=0.086735Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.523 mas, bpa=2.091 degrees ! Estimated noise=789.781 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119096 Jy ! Component: 100 - total flux cleaned = -0.00141713 Jy ! Component: 150 - total flux cleaned = -0.00147027 Jy ! Component: 200 - total flux cleaned = -0.00151856 Jy ! Total flux subtracted in 200 components = -0.00151856 Jy ! Clean residual min=-0.002369 max=0.002651 Jy/beam ! Clean residual mean=0.000007 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.105419 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 78 components and 0.105419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086710Jy sigma=0.000759 ! Fit after self-cal, rms=0.086739Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086739Jy sigma=0.000759 ! Fit after self-cal, rms=0.087196Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.522 mas, bpa=2.098 degrees ! Estimated noise=790.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000612852 Jy ! Component: 100 - total flux cleaned = -0.000709416 Jy ! Component: 150 - total flux cleaned = -0.000774999 Jy ! Component: 200 - total flux cleaned = -0.000837466 Jy ! Total flux subtracted in 200 components = -0.000837466 Jy ! Clean residual min=-0.002305 max=0.002510 Jy/beam ! Clean residual mean=0.000006 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.104581 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.104581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087185Jy sigma=0.000758 ! Fit after self-cal, rms=0.087186Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157547 Jy ! Component: 100 - total flux cleaned = 0.00152263 Jy ! Component: 150 - total flux cleaned = 0.00155439 Jy ! Component: 200 - total flux cleaned = 0.00163586 Jy ! Total flux subtracted in 200 components = 0.00163586 Jy ! Clean residual min=-0.002027 max=0.002075 Jy/beam ! Clean residual mean=0.000008 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.106217 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 101 components and 0.106217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087129Jy sigma=0.000758 ! Fit after self-cal, rms=0.087125Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087125Jy sigma=0.000758 ! Fit after self-cal, rms=0.087299Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.52 mas, bpa=2.066 degrees ! Estimated noise=790.484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000217506 Jy ! Component: 100 - total flux cleaned = 9.73602e-05 Jy ! Component: 150 - total flux cleaned = -1.18514e-05 Jy ! Component: 200 - total flux cleaned = -0.000129338 Jy ! Total flux subtracted in 200 components = -0.000129338 Jy ! Clean residual min=-0.001944 max=0.002057 Jy/beam ! Clean residual mean=0.000008 rms=0.000488 Jy/beam ! Combined flux in latest and established models = 0.106088 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.106088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087287Jy sigma=0.000758 ! Fit after self-cal, rms=0.087292Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.22574e-05 Jy ! Component: 100 - total flux cleaned = -0.00011771 Jy ! Component: 150 - total flux cleaned = -0.000203122 Jy ! Component: 200 - total flux cleaned = -0.000234919 Jy ! Total flux subtracted in 200 components = -0.000234919 Jy ! Clean residual min=-0.001881 max=0.002039 Jy/beam ! Clean residual mean=0.000008 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.105853 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 123 components and 0.105853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087286Jy sigma=0.000758 ! Fit after self-cal, rms=0.087285Jy sigma=0.000758 ! Inverting map ! Added new window around map position (-48.5, 24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116908 Jy ! Component: 100 - total flux cleaned = 0.00101193 Jy ! Component: 150 - total flux cleaned = 0.0010093 Jy ! Component: 200 - total flux cleaned = 0.00105323 Jy ! Total flux subtracted in 200 components = 0.00105323 Jy ! Clean residual min=-0.001699 max=0.001755 Jy/beam ! Clean residual mean=0.000008 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.106906 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 138 components and 0.106906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087248Jy sigma=0.000757 ! Fit after self-cal, rms=0.087247Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087247Jy sigma=0.000757 ! Fit after self-cal, rms=0.087270Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.232 mas, bmaj=18.51 mas, bpa=7.418 degrees ! Estimated noise=1015.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316486 Jy ! Component: 100 - total flux cleaned = 0.000291104 Jy ! Component: 150 - total flux cleaned = 0.000310681 Jy ! Component: 200 - total flux cleaned = 0.000330976 Jy ! Total flux subtracted in 200 components = 0.000330976 Jy ! Clean residual min=-0.001582 max=0.001660 Jy/beam ! Clean residual mean=0.000018 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.107237 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 148 components and 0.107237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087267Jy sigma=0.000757 ! Fit after self-cal, rms=0.087267Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.58402e-05 Jy ! Component: 100 - total flux cleaned = -3.93995e-05 Jy ! Component: 150 - total flux cleaned = -6.19369e-06 Jy ! Component: 200 - total flux cleaned = 9.03631e-06 Jy ! Total flux subtracted in 200 components = 9.03631e-06 Jy ! Clean residual min=-0.001501 max=0.001603 Jy/beam ! Clean residual mean=0.000017 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.107246 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 154 components and 0.107246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087267Jy sigma=0.000757 ! Fit after self-cal, rms=0.087264Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.522 mas, bpa=2.026 degrees ! Estimated noise=790.007 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.853 x 7.522 at 2.026 degrees (North through East) ! Clean map min=-0.0021804 max=0.079602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.275 mas, bmaj=6.379 mas, bpa=0.8852 degrees ! Estimated noise=1460.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621216 Jy ! Component: 100 - total flux cleaned = 0.0801446 Jy ! Component: 150 - total flux cleaned = 0.088994 Jy ! Component: 200 - total flux cleaned = 0.094483 Jy ! Total flux subtracted in 200 components = 0.094483 Jy ! Clean residual min=-0.004723 max=0.004945 Jy/beam ! Clean residual mean=-0.000007 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.094483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.094483 Jy ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.522 mas, bpa=2.026 degrees ! Estimated noise=790.007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548427 Jy ! Component: 100 - total flux cleaned = 0.00848626 Jy ! Component: 150 - total flux cleaned = 0.0107097 Jy ! Component: 200 - total flux cleaned = 0.011935 Jy ! Total flux subtracted in 200 components = 0.011935 Jy ! Clean residual min=-0.002371 max=0.002243 Jy/beam ! Clean residual mean=0.000006 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.106418 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 70 components and 0.106418 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.232 mas, bmaj=18.51 mas, bpa=7.418 degrees ! Estimated noise=1015.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707607 Jy ! Component: 100 - total flux cleaned = 0.000925091 Jy ! Component: 150 - total flux cleaned = 0.0012167 Jy ! Component: 200 - total flux cleaned = 0.00137892 Jy ! Total flux subtracted in 200 components = 0.00137892 Jy ! Clean residual min=-0.001766 max=0.001839 Jy/beam ! Clean residual mean=0.000020 rms=0.000583 Jy/beam ! Combined flux in latest and established models = 0.107797 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.37064e-05 Jy ! Component: 100 - total flux cleaned = 1.01938e-06 Jy ! Component: 150 - total flux cleaned = -8.62022e-05 Jy ! Component: 200 - total flux cleaned = -8.5358e-05 Jy ! Total flux subtracted in 200 components = -8.5358e-05 Jy ! Clean residual min=-0.001623 max=0.001686 Jy/beam ! Clean residual mean=0.000020 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.107712 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 104 components and 0.107712 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=7.522 mas, bpa=2.026 degrees ! Estimated noise=790.007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000292835 Jy ! Component: 100 - total flux cleaned = 0.00033361 Jy ! Component: 150 - total flux cleaned = 0.000216059 Jy ! Component: 200 - total flux cleaned = 0.000215631 Jy ! Total flux subtracted in 200 components = 0.000215631 Jy ! Clean residual min=-0.001693 max=0.001827 Jy/beam ! Clean residual mean=0.000009 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.107927 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 122 components and 0.107927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087310Jy sigma=0.000758 ! Fit after self-cal, rms=0.087313Jy sigma=0.000757 wmodel J1333-2356_S_2015_01_22_pus_map.mod ! Writing 122 model components to file: J1333-2356_S_2015_01_22_pus_map.mod wobs J1333-2356_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1333-2356_S_2015_01_22_pus_uvs.fits wwins J1333-2356_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1333-2356_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488046 Jy ! Component: 100 - total flux cleaned = 0.000751943 Jy ! Component: 150 - total flux cleaned = 0.000863896 Jy ! Component: 200 - total flux cleaned = 0.000943907 Jy ! Component: 250 - total flux cleaned = 0.00104627 Jy ! Component: 300 - total flux cleaned = 0.00116992 Jy ! Component: 350 - total flux cleaned = 0.00133531 Jy ! Component: 400 - total flux cleaned = 0.00140388 Jy ! Component: 450 - total flux cleaned = 0.00149231 Jy ! Component: 500 - total flux cleaned = 0.00151388 Jy ! Component: 550 - total flux cleaned = 0.00155565 Jy ! Component: 600 - total flux cleaned = 0.00155585 Jy ! Component: 650 - total flux cleaned = 0.0015358 Jy ! Component: 700 - total flux cleaned = 0.0014775 Jy ! Component: 750 - total flux cleaned = 0.00144009 Jy ! Component: 800 - total flux cleaned = 0.001385 Jy ! Component: 850 - total flux cleaned = 0.001313 Jy ! Component: 900 - total flux cleaned = 0.00126085 Jy ! Component: 950 - total flux cleaned = 0.0011921 Jy ! Component: 1000 - total flux cleaned = 0.00115869 Jy ! Component: 1050 - total flux cleaned = 0.00114217 Jy ! Component: 1100 - total flux cleaned = 0.00109357 Jy ! Component: 1150 - total flux cleaned = 0.0010938 Jy ! Component: 1200 - total flux cleaned = 0.00109388 Jy ! Component: 1250 - total flux cleaned = 0.00114049 Jy ! Component: 1300 - total flux cleaned = 0.00117116 Jy ! Component: 1350 - total flux cleaned = 0.00117124 Jy ! Component: 1400 - total flux cleaned = 0.00115675 Jy ! Component: 1450 - total flux cleaned = 0.00120016 Jy ! Component: 1500 - total flux cleaned = 0.00122907 Jy ! Component: 1550 - total flux cleaned = 0.00128582 Jy ! Component: 1600 - total flux cleaned = 0.00134179 Jy ! Component: 1650 - total flux cleaned = 0.00138333 Jy ! Component: 1700 - total flux cleaned = 0.00143812 Jy ! Component: 1750 - total flux cleaned = 0.0014924 Jy ! Component: 1800 - total flux cleaned = 0.00155927 Jy ! Component: 1850 - total flux cleaned = 0.00163853 Jy ! Component: 1900 - total flux cleaned = 0.00167769 Jy ! Component: 1950 - total flux cleaned = 0.00175501 Jy ! Component: 2000 - total flux cleaned = 0.00175496 Jy ! Component: 2050 - total flux cleaned = 0.00180564 Jy ! Component: 2100 - total flux cleaned = 0.00185572 Jy ! Component: 2150 - total flux cleaned = 0.00190515 Jy ! Component: 2200 - total flux cleaned = 0.00190526 Jy ! Component: 2250 - total flux cleaned = 0.00196597 Jy ! Component: 2300 - total flux cleaned = 0.00201388 Jy ! Component: 2350 - total flux cleaned = 0.00206144 Jy ! Component: 2400 - total flux cleaned = 0.00208501 Jy ! Component: 2450 - total flux cleaned = 0.00210826 Jy ! Component: 2500 - total flux cleaned = 0.0021544 Jy ! Component: 2550 - total flux cleaned = 0.00217719 Jy ! Component: 2600 - total flux cleaned = 0.00218837 Jy ! Component: 2650 - total flux cleaned = 0.00221086 Jy ! Component: 2700 - total flux cleaned = 0.00221081 Jy ! Component: 2750 - total flux cleaned = 0.00218863 Jy ! Component: 2800 - total flux cleaned = 0.00218873 Jy ! Component: 2850 - total flux cleaned = 0.00218873 Jy ! Component: 2900 - total flux cleaned = 0.00218866 Jy ! Component: 2950 - total flux cleaned = 0.00219949 Jy ! Component: 3000 - total flux cleaned = 0.00217797 Jy ! Component: 3050 - total flux cleaned = 0.00215662 Jy ! Component: 3100 - total flux cleaned = 0.00214602 Jy ! Component: 3150 - total flux cleaned = 0.00213544 Jy ! Component: 3200 - total flux cleaned = 0.00213548 Jy ! Component: 3250 - total flux cleaned = 0.00206216 Jy ! Component: 3300 - total flux cleaned = 0.00205179 Jy ! Component: 3350 - total flux cleaned = 0.00203095 Jy ! Component: 3400 - total flux cleaned = 0.00198958 Jy ! Component: 3450 - total flux cleaned = 0.00196894 Jy ! Component: 3500 - total flux cleaned = 0.00190729 Jy ! Component: 3550 - total flux cleaned = 0.0018765 Jy ! Component: 3600 - total flux cleaned = 0.00186622 Jy ! Component: 3650 - total flux cleaned = 0.00180512 Jy ! Component: 3700 - total flux cleaned = 0.00176445 Jy ! Component: 3750 - total flux cleaned = 0.001734 Jy ! Component: 3800 - total flux cleaned = 0.00169348 Jy ! Component: 3850 - total flux cleaned = 0.0016328 Jy ! Component: 3900 - total flux cleaned = 0.001653 Jy ! Component: 3950 - total flux cleaned = 0.00161271 Jy ! Component: 4000 - total flux cleaned = 0.00159255 Jy ! Component: 4050 - total flux cleaned = 0.00156238 Jy ! Total flux subtracted in 4096 components = 0.00153223 Jy ! Clean residual min=-0.000553 max=0.000618 Jy/beam ! Clean residual mean=-0.000000 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.10946 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 384 components and 0.109459 Jy ![Exited script file: muppet] wmap "J1333-2356_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.853 x 7.522 at 2.026 degrees (North through East) ! Clean map min=-0.0015728 max=0.080037 Jy/beam ! Writing clean map to FITS file: J1333-2356_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.080037 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160069 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.59998 0.59998 1.19996 2.39992 4.79984 9.59968 19.1994 38.3987 76.7974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.08 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.853 x 7.522 at 2.026 degrees (North through East) ! Clean map min=-0.0015728 max=0.080037 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1333-2356_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:58 2017