! Started logfile: J1333-1950_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:44 2017 obs J1333-1950_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1333-1950_S_2015_01_22_pus_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.553086 visibilities/baseline/integration-bin. ! Found source: J1333-1950 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 5376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1333-1950_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.814686Jy sigma=0.008385 ! Fit after self-cal, rms=0.797334Jy sigma=0.008217 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=8.091 mas, bpa=-3.763 degrees ! Estimated noise=1921.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.151346 Jy ! Component: 100 - total flux cleaned = 0.19212 Jy ! Total flux subtracted in 100 components = 0.19212 Jy ! Clean residual min=-0.012367 max=0.020458 Jy/beam ! Clean residual mean=0.000115 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 0.19212 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.19212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096636Jy sigma=0.000866 ! Fit after self-cal, rms=0.096538Jy sigma=0.000866 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.789 mas, bmaj=11.88 mas, bpa=-7.39 degrees ! Estimated noise=1019.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216101 Jy ! Component: 100 - total flux cleaned = 0.0305537 Jy ! Component: 150 - total flux cleaned = 0.034482 Jy ! Component: 200 - total flux cleaned = 0.0356975 Jy ! Total flux subtracted in 200 components = 0.0356975 Jy ! Clean residual min=-0.009937 max=0.016547 Jy/beam ! Clean residual mean=0.000111 rms=0.003418 Jy/beam ! Combined flux in latest and established models = 0.227818 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 32 components and 0.227818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091175Jy sigma=0.000828 ! Fit after self-cal, rms=0.091008Jy sigma=0.000828 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00* KP 1.07 ! LA 0.96 MK 1.01 NL 1.35 OV 1.00 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 0.99 ! LA 0.95 MK 0.97 NL 1.31 OV 1.02 ! PT 1.01 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00* KP 0.85 ! LA 0.78 MK 1.00 NL 1.17 OV 0.95 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 0.80 ! LA 0.85 MK 1.00 NL 1.04 OV 0.99 ! PT 1.03 SC 1.35 ! ! ! Fit before self-cal, rms=0.091008Jy sigma=0.000828 ! Fit after self-cal, rms=0.087981Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.827 mas, bmaj=12.36 mas, bpa=-8.06 degrees ! Estimated noise=1021.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000685031 Jy ! Component: 100 - total flux cleaned = -0.000854806 Jy ! Component: 150 - total flux cleaned = -0.000930375 Jy ! Component: 200 - total flux cleaned = -0.00103182 Jy ! Total flux subtracted in 200 components = -0.00103182 Jy ! Clean residual min=-0.003654 max=0.004582 Jy/beam ! Clean residual mean=0.000016 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.226786 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.226786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087933Jy sigma=0.000762 ! Fit after self-cal, rms=0.087987Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087987Jy sigma=0.000761 ! Fit after self-cal, rms=0.087744Jy sigma=0.000761 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.824 mas, bmaj=12.36 mas, bpa=-8.06 degrees ! Estimated noise=1020.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000340112 Jy ! Component: 100 - total flux cleaned = -0.000466833 Jy ! Component: 150 - total flux cleaned = -0.000548875 Jy ! Component: 200 - total flux cleaned = -0.000599272 Jy ! Total flux subtracted in 200 components = -0.000599272 Jy ! Clean residual min=-0.003480 max=0.004617 Jy/beam ! Clean residual mean=0.000016 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.226187 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.226187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087714Jy sigma=0.000761 ! Fit after self-cal, rms=0.087708Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400715 Jy ! Component: 100 - total flux cleaned = 0.00584199 Jy ! Component: 150 - total flux cleaned = 0.00647794 Jy ! Component: 200 - total flux cleaned = 0.00670021 Jy ! Total flux subtracted in 200 components = 0.00670021 Jy ! Clean residual min=-0.002877 max=0.002647 Jy/beam ! Clean residual mean=-0.000017 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.232887 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 58 components and 0.232887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087495Jy sigma=0.000759 ! Fit after self-cal, rms=0.087499Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087499Jy sigma=0.000759 ! Fit after self-cal, rms=0.086949Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.822 mas, bmaj=12.33 mas, bpa=-8.042 degrees ! Estimated noise=1017.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785465 Jy ! Component: 100 - total flux cleaned = 0.0009403 Jy ! Component: 150 - total flux cleaned = 0.000972985 Jy ! Component: 200 - total flux cleaned = 0.000942054 Jy ! Total flux subtracted in 200 components = 0.000942054 Jy ! Clean residual min=-0.002512 max=0.002420 Jy/beam ! Clean residual mean=-0.000017 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.233829 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.233829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086905Jy sigma=0.000758 ! Fit after self-cal, rms=0.086892Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138757 Jy ! Component: 100 - total flux cleaned = 0.000197881 Jy ! Component: 150 - total flux cleaned = 0.000141587 Jy ! Component: 200 - total flux cleaned = 0.000169038 Jy ! Total flux subtracted in 200 components = 0.000169038 Jy ! Clean residual min=-0.002383 max=0.002342 Jy/beam ! Clean residual mean=-0.000018 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.233998 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.233998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086865Jy sigma=0.000758 ! Fit after self-cal, rms=0.086855Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086855Jy sigma=0.000758 ! Fit after self-cal, rms=0.086245Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.463 mas, bmaj=18.42 mas, bpa=10.96 degrees ! Estimated noise=1220.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000300862 Jy ! Component: 100 - total flux cleaned = 0.000341111 Jy ! Component: 150 - total flux cleaned = 0.0003409 Jy ! Component: 200 - total flux cleaned = 0.000340407 Jy ! Total flux subtracted in 200 components = 0.000340407 Jy ! Clean residual min=-0.002688 max=0.002536 Jy/beam ! Clean residual mean=-0.000030 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.234338 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.234338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086239Jy sigma=0.000758 ! Fit after self-cal, rms=0.086230Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.55695e-05 Jy ! Component: 100 - total flux cleaned = 8.61592e-05 Jy ! Component: 150 - total flux cleaned = 0.000114617 Jy ! Component: 200 - total flux cleaned = 0.000141142 Jy ! Total flux subtracted in 200 components = 0.000141142 Jy ! Clean residual min=-0.002611 max=0.002439 Jy/beam ! Clean residual mean=-0.000031 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.234479 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 110 components and 0.234479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086227Jy sigma=0.000758 ! Fit after self-cal, rms=0.086221Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=12.29 mas, bpa=-8.006 degrees ! Estimated noise=1016.2 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 12.29 at -8.006 degrees (North through East) ! Clean map min=-0.0022801 max=0.20582 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.989 mas, bmaj=8.624 mas, bpa=-5.446 degrees ! Estimated noise=1955.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152627 Jy ! Component: 100 - total flux cleaned = 0.192725 Jy ! Component: 150 - total flux cleaned = 0.208705 Jy ! Component: 200 - total flux cleaned = 0.217416 Jy ! Total flux subtracted in 200 components = 0.217416 Jy ! Clean residual min=-0.005827 max=0.006157 Jy/beam ! Clean residual mean=0.000028 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.217416 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.217416 Jy ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=12.29 mas, bpa=-8.006 degrees ! Estimated noise=1016.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00672394 Jy ! Component: 100 - total flux cleaned = 0.010452 Jy ! Component: 150 - total flux cleaned = 0.0131658 Jy ! Component: 200 - total flux cleaned = 0.0151865 Jy ! Total flux subtracted in 200 components = 0.0151865 Jy ! Clean residual min=-0.002966 max=0.002678 Jy/beam ! Clean residual mean=-0.000010 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.232603 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 40 components and 0.232603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.463 mas, bmaj=18.42 mas, bpa=10.96 degrees ! Estimated noise=1220.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145745 Jy ! Component: 100 - total flux cleaned = 0.00162721 Jy ! Component: 150 - total flux cleaned = 0.00170214 Jy ! Component: 200 - total flux cleaned = 0.00180416 Jy ! Total flux subtracted in 200 components = 0.00180416 Jy ! Clean residual min=-0.002776 max=0.002708 Jy/beam ! Clean residual mean=-0.000031 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.234407 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02558e-05 Jy ! Component: 100 - total flux cleaned = 5.76453e-05 Jy ! Component: 150 - total flux cleaned = 8.2866e-05 Jy ! Component: 200 - total flux cleaned = 0.000106184 Jy ! Total flux subtracted in 200 components = 0.000106184 Jy ! Clean residual min=-0.002674 max=0.002575 Jy/beam ! Clean residual mean=-0.000032 rms=0.000809 Jy/beam ! Combined flux in latest and established models = 0.234513 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.234513 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=12.29 mas, bpa=-8.006 degrees ! Estimated noise=1016.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.36515e-05 Jy ! Component: 100 - total flux cleaned = -4.73123e-06 Jy ! Component: 150 - total flux cleaned = -4.22624e-06 Jy ! Component: 200 - total flux cleaned = 6.01116e-05 Jy ! Total flux subtracted in 200 components = 6.01116e-05 Jy ! Clean residual min=-0.002287 max=0.002433 Jy/beam ! Clean residual mean=-0.000018 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.234573 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.234573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086353Jy sigma=0.000758 ! Fit after self-cal, rms=0.086418Jy sigma=0.000758 wmodel J1333-1950_S_2015_01_22_pus_map.mod ! Writing 75 model components to file: J1333-1950_S_2015_01_22_pus_map.mod wobs J1333-1950_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1333-1950_S_2015_01_22_pus_uvs.fits wwins J1333-1950_S_2015_01_22_pus_map.win ! wwins: Wrote 2 windows to J1333-1950_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00060414 Jy ! Component: 100 - total flux cleaned = 0.000603601 Jy ! Component: 150 - total flux cleaned = 0.000602675 Jy ! Component: 200 - total flux cleaned = 0.000603155 Jy ! Component: 250 - total flux cleaned = 0.000724766 Jy ! Component: 300 - total flux cleaned = 0.000752981 Jy ! Component: 350 - total flux cleaned = 0.000752806 Jy ! Component: 400 - total flux cleaned = 0.00072636 Jy ! Component: 450 - total flux cleaned = 0.000701858 Jy ! Component: 500 - total flux cleaned = 0.000724854 Jy ! Component: 550 - total flux cleaned = 0.000768882 Jy ! Component: 600 - total flux cleaned = 0.000811284 Jy ! Component: 650 - total flux cleaned = 0.000933189 Jy ! Component: 700 - total flux cleaned = 0.000991742 Jy ! Component: 750 - total flux cleaned = 0.00104898 Jy ! Component: 800 - total flux cleaned = 0.00104949 Jy ! Component: 850 - total flux cleaned = 0.00112089 Jy ! Component: 900 - total flux cleaned = 0.00113805 Jy ! Component: 950 - total flux cleaned = 0.00117205 Jy ! Component: 1000 - total flux cleaned = 0.00123781 Jy ! Component: 1050 - total flux cleaned = 0.00130249 Jy ! Component: 1100 - total flux cleaned = 0.00136563 Jy ! Component: 1150 - total flux cleaned = 0.00144349 Jy ! Component: 1200 - total flux cleaned = 0.0015351 Jy ! Component: 1250 - total flux cleaned = 0.00167026 Jy ! Component: 1300 - total flux cleaned = 0.00178834 Jy ! Component: 1350 - total flux cleaned = 0.00191908 Jy ! Component: 1400 - total flux cleaned = 0.00200497 Jy ! Component: 1450 - total flux cleaned = 0.00211767 Jy ! Component: 1500 - total flux cleaned = 0.00224226 Jy ! Component: 1550 - total flux cleaned = 0.00232408 Jy ! Component: 1600 - total flux cleaned = 0.00241838 Jy ! Component: 1650 - total flux cleaned = 0.00253833 Jy ! Component: 1700 - total flux cleaned = 0.00263066 Jy ! Component: 1750 - total flux cleaned = 0.00263063 Jy ! Component: 1800 - total flux cleaned = 0.00257885 Jy ! Component: 1850 - total flux cleaned = 0.00254042 Jy ! Component: 1900 - total flux cleaned = 0.00252759 Jy ! Component: 1950 - total flux cleaned = 0.00252757 Jy ! Component: 2000 - total flux cleaned = 0.00251492 Jy ! Component: 2050 - total flux cleaned = 0.0025149 Jy ! Component: 2100 - total flux cleaned = 0.00250245 Jy ! Component: 2150 - total flux cleaned = 0.00250248 Jy ! Component: 2200 - total flux cleaned = 0.00253982 Jy ! Component: 2250 - total flux cleaned = 0.00255228 Jy ! Component: 2300 - total flux cleaned = 0.00255231 Jy ! Component: 2350 - total flux cleaned = 0.00256479 Jy ! Component: 2400 - total flux cleaned = 0.00258975 Jy ! Component: 2450 - total flux cleaned = 0.00260224 Jy ! Component: 2500 - total flux cleaned = 0.00265221 Jy ! Component: 2550 - total flux cleaned = 0.00268986 Jy ! Component: 2600 - total flux cleaned = 0.00270251 Jy ! Component: 2650 - total flux cleaned = 0.00271529 Jy ! Component: 2700 - total flux cleaned = 0.00275362 Jy ! Component: 2750 - total flux cleaned = 0.00276644 Jy ! Component: 2800 - total flux cleaned = 0.00281818 Jy ! Component: 2850 - total flux cleaned = 0.00284427 Jy ! Component: 2900 - total flux cleaned = 0.00288351 Jy ! Component: 2950 - total flux cleaned = 0.00290991 Jy ! Component: 3000 - total flux cleaned = 0.00296288 Jy ! Component: 3050 - total flux cleaned = 0.00301616 Jy ! Component: 3100 - total flux cleaned = 0.00306989 Jy ! Component: 3150 - total flux cleaned = 0.00311052 Jy ! Component: 3200 - total flux cleaned = 0.00317872 Jy ! Component: 3250 - total flux cleaned = 0.00321996 Jy ! Component: 3300 - total flux cleaned = 0.00330309 Jy ! Component: 3350 - total flux cleaned = 0.00335899 Jy ! Component: 3400 - total flux cleaned = 0.00340145 Jy ! Component: 3450 - total flux cleaned = 0.00345826 Jy ! Component: 3500 - total flux cleaned = 0.00352992 Jy ! Component: 3550 - total flux cleaned = 0.00358764 Jy ! Component: 3600 - total flux cleaned = 0.00366056 Jy ! Component: 3650 - total flux cleaned = 0.00373415 Jy ! Component: 3700 - total flux cleaned = 0.00379367 Jy ! Component: 3750 - total flux cleaned = 0.00385363 Jy ! Component: 3800 - total flux cleaned = 0.00394442 Jy ! Component: 3850 - total flux cleaned = 0.00402076 Jy ! Component: 3900 - total flux cleaned = 0.00411328 Jy ! Component: 3950 - total flux cleaned = 0.00416032 Jy ! Component: 4000 - total flux cleaned = 0.00423911 Jy ! Component: 4050 - total flux cleaned = 0.00430277 Jy ! Total flux subtracted in 4096 components = 0.0043671 Jy ! Clean residual min=-0.000956 max=0.000931 Jy/beam ! Clean residual mean=0.000034 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.23894 Jy keep ! Adding 176 model components to the UV plane model. ! The established model now contains 251 components and 0.23894 Jy ![Exited script file: muppet] wmap "J1333-1950_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 12.29 at -8.006 degrees (North through East) ! Clean map min=-0.0019367 max=0.20455 Jy/beam ! Writing clean map to FITS file: J1333-1950_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.204553 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274845 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.403092 0.403092 0.806184 1.61237 3.22474 6.44947 12.8989 25.7979 51.5958 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.82 x 12.29 at -8.006 degrees (North through East) ! Clean map min=-0.0019367 max=0.20455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1333-1950_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:51 2017