! Started logfile: J1332-1256_X_2015_03_17_pus_uvs.log on Sat Dec 31 19:06:46 2016 obs J1332-1256_X_2015_03_17_pus_uva.fits ! Reading UV FITS file: J1332-1256_X_2015_03_17_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.887914 visibilities/baseline/integration-bin. ! Found source: J1332-1256 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 338 lines of history. ! ! Reading 54660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1332-1256_X_2015_03_17_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.793088Jy sigma=0.008519 ! Fit after self-cal, rms=0.754588Jy sigma=0.008106 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7461 mas, bmaj=1.664 mas, bpa=-4.239 degrees ! Estimated noise=692.993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.191406 Jy ! Component: 100 - total flux cleaned = 0.23761 Jy ! Total flux subtracted in 100 components = 0.23761 Jy ! Clean residual min=-0.009712 max=0.017495 Jy/beam ! Clean residual mean=-0.000015 rms=0.002886 Jy/beam ! Combined flux in latest and established models = 0.23761 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.23761 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094592Jy sigma=0.000917 ! Fit after self-cal, rms=0.094599Jy sigma=0.000917 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178651 Jy ! Component: 100 - total flux cleaned = 0.026781 Jy ! Total flux subtracted in 100 components = 0.026781 Jy ! Clean residual min=-0.010455 max=0.010848 Jy/beam ! Clean residual mean=-0.000023 rms=0.002382 Jy/beam ! Combined flux in latest and established models = 0.264391 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.264391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090685Jy sigma=0.000873 ! Fit after self-cal, rms=0.090683Jy sigma=0.000873 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9376 mas, bmaj=2.008 mas, bpa=-2.259 degrees ! Estimated noise=286.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00595526 Jy ! Component: 100 - total flux cleaned = 0.0089024 Jy ! Component: 150 - total flux cleaned = 0.0104025 Jy ! Component: 200 - total flux cleaned = 0.0104513 Jy ! Total flux subtracted in 200 components = 0.0104513 Jy ! Clean residual min=-0.010000 max=0.008396 Jy/beam ! Clean residual mean=-0.000085 rms=0.002379 Jy/beam ! Combined flux in latest and established models = 0.274842 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.274842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090242Jy sigma=0.000870 ! Fit after self-cal, rms=0.090247Jy sigma=0.000870 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.13 HN 1.11 KP 0.93 ! LA 1.04 MK 0.96 NL 0.99 OV 0.99 ! PT 1.10 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.12 KP 0.88 ! LA 1.04 MK 0.95 NL 1.00 OV 0.98 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.13 HN 1.11 KP 0.84 ! LA 1.08 MK 0.97 NL 0.98 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.09 KP 0.79 ! LA 1.07 MK 0.98 NL 0.99 OV 0.99 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.10 HN 1.06 KP 0.74 ! LA 1.05 MK 0.99 NL 1.01 OV 1.00 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.11 HN 1.09 KP 0.75 ! LA 1.05 MK 0.99 NL 1.00 OV 1.02 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.12 HN 1.14 KP 0.74 ! LA 1.06 MK 0.99 NL 0.99 OV 1.04 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.17 HN 1.15 KP 0.74 ! LA 1.05 MK 0.97 NL 1.00 OV 1.03 ! PT 1.04 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.16 KP 0.76 ! LA 1.05 MK 0.97 NL 1.00 OV 1.04 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 HN 1.11 KP 0.79 ! LA 1.08 MK 1.01 NL 0.99 OV 1.04 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.11 KP 0.83 ! LA 1.09 MK 0.98 NL 1.00 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 HN 1.11 KP 0.84 ! LA 1.05 MK 0.99 NL 1.00 OV 1.01 ! PT 1.09 SC 0.98 ! ! ! Fit before self-cal, rms=0.090247Jy sigma=0.000870 ! Fit after self-cal, rms=0.082367Jy sigma=0.000792 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9408 mas, bmaj=2.003 mas, bpa=-2.276 degrees ! Estimated noise=285.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102621 Jy ! Component: 100 - total flux cleaned = -0.00108406 Jy ! Component: 150 - total flux cleaned = -0.00118692 Jy ! Component: 200 - total flux cleaned = -0.00132881 Jy ! Total flux subtracted in 200 components = -0.00132881 Jy ! Clean residual min=-0.003103 max=0.003575 Jy/beam ! Clean residual mean=0.000059 rms=0.000799 Jy/beam ! Combined flux in latest and established models = 0.273513 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.273513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082271Jy sigma=0.000792 ! Fit after self-cal, rms=0.082295Jy sigma=0.000791 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082295Jy sigma=0.000791 ! Fit after self-cal, rms=0.084798Jy sigma=0.000782 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9412 mas, bmaj=2.03 mas, bpa=-2.566 degrees ! Estimated noise=286.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344388 Jy ! Component: 100 - total flux cleaned = -0.000343479 Jy ! Component: 150 - total flux cleaned = -0.000286634 Jy ! Component: 200 - total flux cleaned = -0.000235415 Jy ! Total flux subtracted in 200 components = -0.000235415 Jy ! Clean residual min=-0.001408 max=0.001764 Jy/beam ! Clean residual mean=0.000016 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.273278 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.273278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084774Jy sigma=0.000782 ! Fit after self-cal, rms=0.084824Jy sigma=0.000782 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151571 Jy ! Component: 100 - total flux cleaned = 0.001679 Jy ! Component: 150 - total flux cleaned = 0.00178082 Jy ! Component: 200 - total flux cleaned = 0.00175284 Jy ! Total flux subtracted in 200 components = 0.00175284 Jy ! Clean residual min=-0.001289 max=0.001320 Jy/beam ! Clean residual mean=0.000008 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.275031 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 0.275031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084777Jy sigma=0.000781 ! Fit after self-cal, rms=0.084775Jy sigma=0.000781 ! Inverting map ! Added new window around map position (4.4, -21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105961 Jy ! Component: 100 - total flux cleaned = 0.00123094 Jy ! Component: 150 - total flux cleaned = 0.00128321 Jy ! Component: 200 - total flux cleaned = 0.00128326 Jy ! Total flux subtracted in 200 components = 0.00128326 Jy ! Clean residual min=-0.001258 max=0.001073 Jy/beam ! Clean residual mean=0.000006 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.276314 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 70 components and 0.276314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084750Jy sigma=0.000781 ! Fit after self-cal, rms=0.084752Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084752Jy sigma=0.000781 ! Fit after self-cal, rms=0.084700Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9411 mas, bmaj=2.031 mas, bpa=-2.558 degrees ! Estimated noise=285.911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132348 Jy ! Component: 100 - total flux cleaned = 0.000108473 Jy ! Component: 150 - total flux cleaned = 4.13506e-05 Jy ! Component: 200 - total flux cleaned = -1.7244e-08 Jy ! Total flux subtracted in 200 components = -1.7244e-08 Jy ! Clean residual min=-0.001129 max=0.001081 Jy/beam ! Clean residual mean=0.000002 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.276314 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.276314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084687Jy sigma=0.000781 ! Fit after self-cal, rms=0.084687Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.4674e-05 Jy ! Component: 100 - total flux cleaned = 6.42994e-05 Jy ! Component: 150 - total flux cleaned = 6.42455e-05 Jy ! Component: 200 - total flux cleaned = 9.8809e-05 Jy ! Total flux subtracted in 200 components = 9.8809e-05 Jy ! Clean residual min=-0.001058 max=0.001050 Jy/beam ! Clean residual mean=0.000002 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.276413 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 78 components and 0.276413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084679Jy sigma=0.000781 ! Fit after self-cal, rms=0.084679Jy sigma=0.000781 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084679Jy sigma=0.000781 ! Fit after self-cal, rms=0.084653Jy sigma=0.000781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=3.783 mas, bpa=3.749 degrees ! Estimated noise=355.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119828 Jy ! Component: 100 - total flux cleaned = -0.000127054 Jy ! Component: 150 - total flux cleaned = -0.000184674 Jy ! Component: 200 - total flux cleaned = -0.000245554 Jy ! Total flux subtracted in 200 components = -0.000245554 Jy ! Clean residual min=-0.001028 max=0.001192 Jy/beam ! Clean residual mean=0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.276167 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.276167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084653Jy sigma=0.000781 ! Fit after self-cal, rms=0.084654Jy sigma=0.000781 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.07958e-05 Jy ! Component: 100 - total flux cleaned = -9.27785e-05 Jy ! Component: 150 - total flux cleaned = -0.000136866 Jy ! Component: 200 - total flux cleaned = -0.000150342 Jy ! Total flux subtracted in 200 components = -0.000150342 Jy ! Clean residual min=-0.001020 max=0.001161 Jy/beam ! Clean residual mean=0.000002 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.276017 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 0.276017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084654Jy sigma=0.000781 ! Fit after self-cal, rms=0.084654Jy sigma=0.000781 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9413 mas, bmaj=2.032 mas, bpa=-2.563 degrees ! Estimated noise=285.696 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9413 x 2.032 at -2.563 degrees (North through East) ! Clean map min=-0.00094895 max=0.24916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7493 mas, bmaj=1.687 mas, bpa=-4.338 degrees ! Estimated noise=691.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.190973 Jy ! Component: 100 - total flux cleaned = 0.236361 Jy ! Component: 150 - total flux cleaned = 0.253458 Jy ! Component: 200 - total flux cleaned = 0.261377 Jy ! Total flux subtracted in 200 components = 0.261377 Jy ! Clean residual min=-0.003477 max=0.003805 Jy/beam ! Clean residual mean=0.000006 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.261377 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.261377 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9413 mas, bmaj=2.032 mas, bpa=-2.563 degrees ! Estimated noise=285.696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581042 Jy ! Component: 100 - total flux cleaned = 0.00888794 Jy ! Component: 150 - total flux cleaned = 0.0108886 Jy ! Component: 200 - total flux cleaned = 0.0123206 Jy ! Total flux subtracted in 200 components = 0.0123206 Jy ! Clean residual min=-0.001355 max=0.001320 Jy/beam ! Clean residual mean=0.000008 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.273698 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 40 components and 0.273698 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.302 mas, bmaj=3.783 mas, bpa=3.749 degrees ! Estimated noise=355.308 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123258 Jy ! Component: 100 - total flux cleaned = 0.00186615 Jy ! Component: 150 - total flux cleaned = 0.00204739 Jy ! Component: 200 - total flux cleaned = 0.00217544 Jy ! Total flux subtracted in 200 components = 0.00217544 Jy ! Clean residual min=-0.001039 max=0.001112 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.275873 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.29052e-05 Jy ! Component: 100 - total flux cleaned = 0.000186995 Jy ! Component: 150 - total flux cleaned = 0.00022319 Jy ! Component: 200 - total flux cleaned = 0.000255919 Jy ! Total flux subtracted in 200 components = 0.000255919 Jy ! Clean residual min=-0.000977 max=0.001122 Jy/beam ! Clean residual mean=-0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.276129 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 74 components and 0.276129 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9413 mas, bmaj=2.032 mas, bpa=-2.563 degrees ! Estimated noise=285.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200907 Jy ! Component: 100 - total flux cleaned = -0.00013861 Jy ! Component: 150 - total flux cleaned = -0.000139196 Jy ! Component: 200 - total flux cleaned = -0.000140208 Jy ! Total flux subtracted in 200 components = -0.000140208 Jy ! Clean residual min=-0.001107 max=0.001030 Jy/beam ! Clean residual mean=0.000001 rms=0.000265 Jy/beam ! Combined flux in latest and established models = 0.275989 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.275989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084658Jy sigma=0.000781 ! Fit after self-cal, rms=0.084651Jy sigma=0.000781 wmodel J1332-1256_X_2015_03_17_pus_map.mod ! Writing 89 model components to file: J1332-1256_X_2015_03_17_pus_map.mod wobs J1332-1256_X_2015_03_17_pus_uvs.fits ! Writing UV FITS file: J1332-1256_X_2015_03_17_pus_uvs.fits wwins J1332-1256_X_2015_03_17_pus_map.win ! wwins: Wrote 3 windows to J1332-1256_X_2015_03_17_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320744 Jy ! Component: 100 - total flux cleaned = -0.000337698 Jy ! Component: 150 - total flux cleaned = -0.000353875 Jy ! Component: 200 - total flux cleaned = -0.000369109 Jy ! Component: 250 - total flux cleaned = -0.000399192 Jy ! Component: 300 - total flux cleaned = -0.000413819 Jy ! Component: 350 - total flux cleaned = -0.000455906 Jy ! Component: 400 - total flux cleaned = -0.000496681 Jy ! Component: 450 - total flux cleaned = -0.000510129 Jy ! Component: 500 - total flux cleaned = -0.00056182 Jy ! Component: 550 - total flux cleaned = -0.000586945 Jy ! Component: 600 - total flux cleaned = -0.000599328 Jy ! Component: 650 - total flux cleaned = -0.000623278 Jy ! Component: 700 - total flux cleaned = -0.000635217 Jy ! Component: 750 - total flux cleaned = -0.000658436 Jy ! Component: 800 - total flux cleaned = -0.000681188 Jy ! Component: 850 - total flux cleaned = -0.000725282 Jy ! Component: 900 - total flux cleaned = -0.000725144 Jy ! Component: 950 - total flux cleaned = -0.000735682 Jy ! Component: 1000 - total flux cleaned = -0.000766874 Jy ! Component: 1050 - total flux cleaned = -0.000787379 Jy ! Component: 1100 - total flux cleaned = -0.000797601 Jy ! Component: 1150 - total flux cleaned = -0.00085717 Jy ! Component: 1200 - total flux cleaned = -0.000886277 Jy ! Component: 1250 - total flux cleaned = -0.000924532 Jy ! Component: 1300 - total flux cleaned = -0.000962051 Jy ! Component: 1350 - total flux cleaned = -0.000962225 Jy ! Component: 1400 - total flux cleaned = -0.00100801 Jy ! Component: 1450 - total flux cleaned = -0.00103511 Jy ! Component: 1500 - total flux cleaned = -0.00104392 Jy ! Component: 1550 - total flux cleaned = -0.00103524 Jy ! Component: 1600 - total flux cleaned = -0.00102676 Jy ! Component: 1650 - total flux cleaned = -0.00104389 Jy ! Component: 1700 - total flux cleaned = -0.00104392 Jy ! Component: 1750 - total flux cleaned = -0.00105236 Jy ! Component: 1800 - total flux cleaned = -0.00104412 Jy ! Component: 1850 - total flux cleaned = -0.00105238 Jy ! Component: 1900 - total flux cleaned = -0.00105239 Jy ! Component: 1950 - total flux cleaned = -0.00103642 Jy ! Component: 2000 - total flux cleaned = -0.00106024 Jy ! Total flux subtracted in 2048 components = -0.00106017 Jy ! Clean residual min=-0.000523 max=0.000507 Jy/beam ! Clean residual mean=0.000003 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.274929 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 227 components and 0.274929 Jy ![Exited script file: muppet] wmap "J1332-1256_X_2015_03_17_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9413 x 2.032 at -2.563 degrees (North through East) ! Clean map min=-0.00078841 max=0.24878 Jy/beam ! Writing clean map to FITS file: J1332-1256_X_2015_03_17_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.248778 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000143539 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.173093 0.173093 0.346187 0.692374 1.38475 2.7695 5.53899 11.078 22.156 44.3119 88.6239 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.248 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9413 x 2.032 at -2.563 degrees (North through East) ! Clean map min=-0.00078841 max=0.24878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1332-1256_X_2015_03_17_pus_uvs.log closed on Sat Dec 31 19:06:49 2016