! Started logfile: J1332-1256_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:30 2017 obs J1332-1256_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1332-1256_S_2015_01_22_pus_uva.fits ! AN table 1: 59 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1332-1256 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 8496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1332-1256_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914486Jy sigma=0.010128 ! Fit after self-cal, rms=0.902002Jy sigma=0.010017 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.031 mas, bmaj=7.894 mas, bpa=-4.757 degrees ! Estimated noise=1440.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0735773 Jy ! Component: 100 - total flux cleaned = 0.0905351 Jy ! Total flux subtracted in 100 components = 0.0905351 Jy ! Clean residual min=-0.009106 max=0.015923 Jy/beam ! Clean residual mean=0.000026 rms=0.002859 Jy/beam ! Combined flux in latest and established models = 0.0905351 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0905351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090862Jy sigma=0.000833 ! Fit after self-cal, rms=0.090869Jy sigma=0.000833 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.653 mas, bmaj=9.96 mas, bpa=-7.41 degrees ! Estimated noise=820.329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43.5, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157505 Jy ! Component: 100 - total flux cleaned = 0.0234555 Jy ! Component: 150 - total flux cleaned = 0.02843 Jy ! Component: 200 - total flux cleaned = 0.0305725 Jy ! Total flux subtracted in 200 components = 0.0305725 Jy ! Clean residual min=-0.004773 max=0.008413 Jy/beam ! Clean residual mean=0.000014 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.121108 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 66 components and 0.121108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088172Jy sigma=0.000796 ! Fit after self-cal, rms=0.087813Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.13 KP 1.07 ! LA 0.98 MK 1.02 NL 1.54 OV 0.96 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00* KP 1.02 ! LA 0.99 MK 0.99 NL 1.26 OV 0.98 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 1.20 KP 0.86 ! LA 0.81 MK 1.02 NL 0.91 OV 0.93 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.12 KP 0.80 ! LA 0.83 MK 1.03 NL 0.80 OV 1.02 ! PT 1.03 SC 1.05 ! ! ! Fit before self-cal, rms=0.087813Jy sigma=0.000792 ! Fit after self-cal, rms=0.086416Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=9.961 mas, bpa=-7.451 degrees ! Estimated noise=822.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210431 Jy ! Component: 100 - total flux cleaned = -0.00240829 Jy ! Component: 150 - total flux cleaned = -0.00252955 Jy ! Component: 200 - total flux cleaned = -0.00252972 Jy ! Total flux subtracted in 200 components = -0.00252972 Jy ! Clean residual min=-0.002649 max=0.003305 Jy/beam ! Clean residual mean=0.000012 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.118578 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 0.118578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086347Jy sigma=0.000768 ! Fit after self-cal, rms=0.086387Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086387Jy sigma=0.000767 ! Fit after self-cal, rms=0.086530Jy sigma=0.000767 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=9.972 mas, bpa=-7.463 degrees ! Estimated noise=823.776 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114746 Jy ! Component: 100 - total flux cleaned = -0.00154008 Jy ! Component: 150 - total flux cleaned = -0.00160462 Jy ! Component: 200 - total flux cleaned = -0.00157723 Jy ! Total flux subtracted in 200 components = -0.00157723 Jy ! Clean residual min=-0.002512 max=0.003218 Jy/beam ! Clean residual mean=0.000011 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.117001 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 98 components and 0.117001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086492Jy sigma=0.000767 ! Fit after self-cal, rms=0.086493Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-74.5, 104.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155858 Jy ! Component: 100 - total flux cleaned = 0.00189014 Jy ! Component: 150 - total flux cleaned = 0.00202247 Jy ! Component: 200 - total flux cleaned = 0.00221385 Jy ! Total flux subtracted in 200 components = 0.00221385 Jy ! Clean residual min=-0.002245 max=0.002374 Jy/beam ! Clean residual mean=0.000007 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.119215 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 125 components and 0.119215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086368Jy sigma=0.000765 ! Fit after self-cal, rms=0.086360Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086360Jy sigma=0.000765 ! Fit after self-cal, rms=0.086084Jy sigma=0.000765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=9.951 mas, bpa=-7.378 degrees ! Estimated noise=826.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.10821e-05 Jy ! Component: 100 - total flux cleaned = 4.57905e-05 Jy ! Component: 150 - total flux cleaned = 0.000136475 Jy ! Component: 200 - total flux cleaned = 0.000249191 Jy ! Total flux subtracted in 200 components = 0.000249191 Jy ! Clean residual min=-0.002153 max=0.002326 Jy/beam ! Clean residual mean=0.000005 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.119464 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 140 components and 0.119464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086039Jy sigma=0.000765 ! Fit after self-cal, rms=0.086031Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-89, 31). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017812 Jy ! Component: 100 - total flux cleaned = 0.00243952 Jy ! Component: 150 - total flux cleaned = 0.00272377 Jy ! Component: 200 - total flux cleaned = 0.0030154 Jy ! Total flux subtracted in 200 components = 0.0030154 Jy ! Clean residual min=-0.002102 max=0.001814 Jy/beam ! Clean residual mean=0.000003 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.122479 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 166 components and 0.122479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085967Jy sigma=0.000764 ! Fit after self-cal, rms=0.085966Jy sigma=0.000764 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085966Jy sigma=0.000764 ! Fit after self-cal, rms=0.085666Jy sigma=0.000764 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.123 mas, bmaj=16.75 mas, bpa=9.371 degrees ! Estimated noise=975.958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.37131e-05 Jy ! Component: 100 - total flux cleaned = 1.268e-05 Jy ! Component: 150 - total flux cleaned = 0.000134172 Jy ! Component: 200 - total flux cleaned = 0.00025811 Jy ! Total flux subtracted in 200 components = 0.00025811 Jy ! Clean residual min=-0.001640 max=0.001548 Jy/beam ! Clean residual mean=0.000004 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.122737 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 202 components and 0.122737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085651Jy sigma=0.000764 ! Fit after self-cal, rms=0.085651Jy sigma=0.000764 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.0036e-05 Jy ! Component: 100 - total flux cleaned = 0.000206205 Jy ! Component: 150 - total flux cleaned = 0.000305547 Jy ! Component: 200 - total flux cleaned = 0.000396856 Jy ! Total flux subtracted in 200 components = 0.000396856 Jy ! Clean residual min=-0.001559 max=0.001547 Jy/beam ! Clean residual mean=0.000003 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.123134 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 213 components and 0.123134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085644Jy sigma=0.000764 ! Fit after self-cal, rms=0.085644Jy sigma=0.000764 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=9.956 mas, bpa=-7.375 degrees ! Estimated noise=824.764 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.714 x 9.956 at -7.375 degrees (North through East) ! Clean map min=-0.0033281 max=0.091535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=7.914 mas, bpa=-4.814 degrees ! Estimated noise=1470.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0747716 Jy ! Component: 100 - total flux cleaned = 0.0933701 Jy ! Component: 150 - total flux cleaned = 0.101241 Jy ! Component: 200 - total flux cleaned = 0.105118 Jy ! Total flux subtracted in 200 components = 0.105118 Jy ! Clean residual min=-0.004572 max=0.004781 Jy/beam ! Clean residual mean=0.000015 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.105118 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.105118 Jy ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=9.956 mas, bpa=-7.375 degrees ! Estimated noise=824.764 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599606 Jy ! Component: 100 - total flux cleaned = 0.00918497 Jy ! Component: 150 - total flux cleaned = 0.0108827 Jy ! Component: 200 - total flux cleaned = 0.0119155 Jy ! Total flux subtracted in 200 components = 0.0119155 Jy ! Clean residual min=-0.002365 max=0.002261 Jy/beam ! Clean residual mean=0.000013 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.117033 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 64 components and 0.117033 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.123 mas, bmaj=16.75 mas, bpa=9.371 degrees ! Estimated noise=975.958 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254081 Jy ! Component: 100 - total flux cleaned = 0.00414087 Jy ! Component: 150 - total flux cleaned = 0.00490385 Jy ! Component: 200 - total flux cleaned = 0.00511929 Jy ! Total flux subtracted in 200 components = 0.00511929 Jy ! Clean residual min=-0.002078 max=0.001726 Jy/beam ! Clean residual mean=0.000007 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.122153 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022306 Jy ! Component: 100 - total flux cleaned = 0.000425512 Jy ! Component: 150 - total flux cleaned = 0.000609745 Jy ! Component: 200 - total flux cleaned = 0.000749334 Jy ! Total flux subtracted in 200 components = 0.000749334 Jy ! Clean residual min=-0.001791 max=0.001653 Jy/beam ! Clean residual mean=0.000005 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.122902 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 127 components and 0.122902 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=9.956 mas, bpa=-7.375 degrees ! Estimated noise=824.764 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.07547e-05 Jy ! Component: 100 - total flux cleaned = -1.36407e-05 Jy ! Component: 150 - total flux cleaned = 0.000141092 Jy ! Component: 200 - total flux cleaned = 0.000355578 Jy ! Total flux subtracted in 200 components = 0.000355578 Jy ! Clean residual min=-0.001900 max=0.001755 Jy/beam ! Clean residual mean=0.000002 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.123257 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 0.123257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085652Jy sigma=0.000764 ! Fit after self-cal, rms=0.085648Jy sigma=0.000764 wmodel J1332-1256_S_2015_01_22_pus_map.mod ! Writing 148 model components to file: J1332-1256_S_2015_01_22_pus_map.mod wobs J1332-1256_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1332-1256_S_2015_01_22_pus_uvs.fits wwins J1332-1256_S_2015_01_22_pus_map.win ! wwins: Wrote 4 windows to J1332-1256_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000567547 Jy ! Component: 100 - total flux cleaned = -0.000844333 Jy ! Component: 150 - total flux cleaned = -0.000900134 Jy ! Component: 200 - total flux cleaned = -0.000953471 Jy ! Component: 250 - total flux cleaned = -0.000952552 Jy ! Component: 300 - total flux cleaned = -0.000953259 Jy ! Component: 350 - total flux cleaned = -0.000906996 Jy ! Component: 400 - total flux cleaned = -0.000840631 Jy ! Component: 450 - total flux cleaned = -0.000819098 Jy ! Component: 500 - total flux cleaned = -0.000818849 Jy ! Component: 550 - total flux cleaned = -0.000818612 Jy ! Component: 600 - total flux cleaned = -0.00085682 Jy ! Component: 650 - total flux cleaned = -0.000819177 Jy ! Component: 700 - total flux cleaned = -0.000801389 Jy ! Component: 750 - total flux cleaned = -0.000819206 Jy ! Component: 800 - total flux cleaned = -0.000767793 Jy ! Component: 850 - total flux cleaned = -0.000751418 Jy ! Component: 900 - total flux cleaned = -0.00070225 Jy ! Component: 950 - total flux cleaned = -0.000670226 Jy ! Component: 1000 - total flux cleaned = -0.000623333 Jy ! Component: 1050 - total flux cleaned = -0.000593014 Jy ! Component: 1100 - total flux cleaned = -0.000652566 Jy ! Component: 1150 - total flux cleaned = -0.000666881 Jy ! Component: 1200 - total flux cleaned = -0.000695587 Jy ! Component: 1250 - total flux cleaned = -0.000738314 Jy ! Component: 1300 - total flux cleaned = -0.000780201 Jy ! Component: 1350 - total flux cleaned = -0.000807573 Jy ! Component: 1400 - total flux cleaned = -0.000861643 Jy ! Component: 1450 - total flux cleaned = -0.00090157 Jy ! Component: 1500 - total flux cleaned = -0.0009409 Jy ! Component: 1550 - total flux cleaned = -0.0010053 Jy ! Component: 1600 - total flux cleaned = -0.00101787 Jy ! Component: 1650 - total flux cleaned = -0.00106806 Jy ! Component: 1700 - total flux cleaned = -0.00113005 Jy ! Component: 1750 - total flux cleaned = -0.00119125 Jy ! Component: 1800 - total flux cleaned = -0.00125176 Jy ! Component: 1850 - total flux cleaned = -0.0013116 Jy ! Component: 1900 - total flux cleaned = -0.00141804 Jy ! Component: 1950 - total flux cleaned = -0.00147638 Jy ! Component: 2000 - total flux cleaned = -0.00155744 Jy ! Component: 2050 - total flux cleaned = -0.00164911 Jy ! Component: 2100 - total flux cleaned = -0.00171729 Jy ! Component: 2150 - total flux cleaned = -0.00178485 Jy ! Component: 2200 - total flux cleaned = -0.00186301 Jy ! Component: 2250 - total flux cleaned = -0.00189613 Jy ! Component: 2300 - total flux cleaned = -0.00197294 Jy ! Component: 2350 - total flux cleaned = -0.0020274 Jy ! Component: 2400 - total flux cleaned = -0.00205975 Jy ! Component: 2450 - total flux cleaned = -0.00204899 Jy ! Component: 2500 - total flux cleaned = -0.00208086 Jy ! Component: 2550 - total flux cleaned = -0.0020598 Jy ! Component: 2600 - total flux cleaned = -0.00208078 Jy ! Component: 2650 - total flux cleaned = -0.00212244 Jy ! Component: 2700 - total flux cleaned = -0.00216359 Jy ! Component: 2750 - total flux cleaned = -0.0021636 Jy ! Component: 2800 - total flux cleaned = -0.00218394 Jy ! Component: 2850 - total flux cleaned = -0.00215358 Jy ! Component: 2900 - total flux cleaned = -0.00214348 Jy ! Component: 2950 - total flux cleaned = -0.00214362 Jy ! Component: 3000 - total flux cleaned = -0.00214356 Jy ! Component: 3050 - total flux cleaned = -0.00212379 Jy ! Component: 3100 - total flux cleaned = -0.00213362 Jy ! Component: 3150 - total flux cleaned = -0.00212389 Jy ! Component: 3200 - total flux cleaned = -0.00212389 Jy ! Component: 3250 - total flux cleaned = -0.00212386 Jy ! Component: 3300 - total flux cleaned = -0.00209499 Jy ! Component: 3350 - total flux cleaned = -0.00209503 Jy ! Component: 3400 - total flux cleaned = -0.00207591 Jy ! Component: 3450 - total flux cleaned = -0.00206642 Jy ! Component: 3500 - total flux cleaned = -0.00206645 Jy ! Component: 3550 - total flux cleaned = -0.00206647 Jy ! Component: 3600 - total flux cleaned = -0.00207586 Jy ! Component: 3650 - total flux cleaned = -0.00206652 Jy ! Component: 3700 - total flux cleaned = -0.00208526 Jy ! Component: 3750 - total flux cleaned = -0.00209462 Jy ! Component: 3800 - total flux cleaned = -0.00208529 Jy ! Component: 3850 - total flux cleaned = -0.00210391 Jy ! Component: 3900 - total flux cleaned = -0.0020946 Jy ! Component: 3950 - total flux cleaned = -0.00211312 Jy ! Component: 4000 - total flux cleaned = -0.00212233 Jy ! Component: 4050 - total flux cleaned = -0.00212234 Jy ! Total flux subtracted in 4096 components = -0.00211314 Jy ! Clean residual min=-0.000577 max=0.000529 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.121144 Jy keep ! Adding 227 model components to the UV plane model. ! The established model now contains 375 components and 0.121144 Jy ![Exited script file: muppet] wmap "J1332-1256_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.714 x 9.956 at -7.375 degrees (North through East) ! Clean map min=-0.0024549 max=0.092711 Jy/beam ! Writing clean map to FITS file: J1332-1256_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0927111 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000169816 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.5495 0.5495 1.099 2.198 4.396 8.79201 17.584 35.168 70.3361 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.714 x 9.956 at -7.375 degrees (North through East) ! Clean map min=-0.0024549 max=0.092711 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1332-1256_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:37 2017