! Started logfile: J1331-2639_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:24 2017 obs J1331-2639_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1331-2639_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1331-2639 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 9072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1331-2639_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 94 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.916207Jy sigma=0.008644 ! Fit after self-cal, rms=0.903687Jy sigma=0.008535 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.193 mas, bmaj=6.354 mas, bpa=1.308 degrees ! Estimated noise=1430.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0744129 Jy ! Component: 100 - total flux cleaned = 0.0921347 Jy ! Total flux subtracted in 100 components = 0.0921347 Jy ! Clean residual min=-0.005891 max=0.009488 Jy/beam ! Clean residual mean=-0.000048 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 0.0921347 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0921347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095421Jy sigma=0.000812 ! Fit after self-cal, rms=0.095413Jy sigma=0.000812 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.463 mas, bpa=2.469 degrees ! Estimated noise=839.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127771 Jy ! Component: 100 - total flux cleaned = 0.0186064 Jy ! Component: 150 - total flux cleaned = 0.0216152 Jy ! Component: 200 - total flux cleaned = 0.0227924 Jy ! Total flux subtracted in 200 components = 0.0227924 Jy ! Clean residual min=-0.005187 max=0.007861 Jy/beam ! Clean residual mean=-0.000064 rms=0.001606 Jy/beam ! Combined flux in latest and established models = 0.114927 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 33 components and 0.114927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093849Jy sigma=0.000796 ! Fit after self-cal, rms=0.093848Jy sigma=0.000796 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.18 KP 1.06 ! LA 1.02 MK 1.00 NL 1.30 OV 0.98 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.31 KP 0.95 ! LA 1.04 MK 1.02 NL 1.29 OV 0.99 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.32 KP 0.84 ! LA 0.79 MK 1.05 NL 1.17 OV 0.89 ! PT 0.93 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 0.78 ! LA 0.88 MK 1.00 NL 1.02 OV 0.95 ! PT 0.96 SC 0.99 ! ! ! Fit before self-cal, rms=0.093848Jy sigma=0.000796 ! Fit after self-cal, rms=0.098027Jy sigma=0.000779 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=7.454 mas, bpa=3.062 degrees ! Estimated noise=840.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430618 Jy ! Component: 100 - total flux cleaned = 0.00597975 Jy ! Component: 150 - total flux cleaned = 0.00628705 Jy ! Component: 200 - total flux cleaned = 0.00635852 Jy ! Total flux subtracted in 200 components = 0.00635852 Jy ! Clean residual min=-0.002451 max=0.002376 Jy/beam ! Clean residual mean=0.000008 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.121286 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.121286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097860Jy sigma=0.000777 ! Fit after self-cal, rms=0.098089Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098089Jy sigma=0.000776 ! Fit after self-cal, rms=0.097856Jy sigma=0.000776 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.831 mas, bmaj=7.431 mas, bpa=3.051 degrees ! Estimated noise=836.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123419 Jy ! Component: 100 - total flux cleaned = 0.00155408 Jy ! Component: 150 - total flux cleaned = 0.00152961 Jy ! Component: 200 - total flux cleaned = 0.00150609 Jy ! Total flux subtracted in 200 components = 0.00150609 Jy ! Clean residual min=-0.002258 max=0.002322 Jy/beam ! Clean residual mean=0.000005 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.122792 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.122792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097829Jy sigma=0.000776 ! Fit after self-cal, rms=0.097842Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294628 Jy ! Component: 100 - total flux cleaned = 0.000273489 Jy ! Component: 150 - total flux cleaned = 0.000253741 Jy ! Component: 200 - total flux cleaned = 0.000235271 Jy ! Total flux subtracted in 200 components = 0.000235271 Jy ! Clean residual min=-0.002283 max=0.002329 Jy/beam ! Clean residual mean=0.000005 rms=0.000552 Jy/beam ! Combined flux in latest and established models = 0.123027 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 79 components and 0.123027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097830Jy sigma=0.000776 ! Fit after self-cal, rms=0.097831Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097831Jy sigma=0.000776 ! Fit after self-cal, rms=0.097408Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=7.428 mas, bpa=3.091 degrees ! Estimated noise=835.489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494242 Jy ! Component: 100 - total flux cleaned = 0.000475355 Jy ! Component: 150 - total flux cleaned = 0.000442706 Jy ! Component: 200 - total flux cleaned = 0.000458264 Jy ! Total flux subtracted in 200 components = 0.000458264 Jy ! Clean residual min=-0.002247 max=0.002361 Jy/beam ! Clean residual mean=0.000003 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.123485 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.123485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097397Jy sigma=0.000775 ! Fit after self-cal, rms=0.097393Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (94.5, -76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016624 Jy ! Component: 100 - total flux cleaned = 0.00147439 Jy ! Component: 150 - total flux cleaned = 0.00135284 Jy ! Component: 200 - total flux cleaned = 0.00124586 Jy ! Total flux subtracted in 200 components = 0.00124586 Jy ! Clean residual min=-0.002233 max=0.001918 Jy/beam ! Clean residual mean=0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.124731 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.124731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097339Jy sigma=0.000775 ! Fit after self-cal, rms=0.097336Jy sigma=0.000775 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097336Jy sigma=0.000775 ! Fit after self-cal, rms=0.097033Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=19.85 mas, bpa=7.765 degrees ! Estimated noise=1077.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552474 Jy ! Component: 100 - total flux cleaned = 0.000693577 Jy ! Component: 150 - total flux cleaned = 0.000705473 Jy ! Component: 200 - total flux cleaned = 0.000716651 Jy ! Total flux subtracted in 200 components = 0.000716651 Jy ! Clean residual min=-0.001951 max=0.002004 Jy/beam ! Clean residual mean=-0.000001 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.125448 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 114 components and 0.125448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097028Jy sigma=0.000775 ! Fit after self-cal, rms=0.097021Jy sigma=0.000775 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022932 Jy ! Component: 100 - total flux cleaned = 0.000239192 Jy ! Component: 150 - total flux cleaned = 0.000248567 Jy ! Component: 200 - total flux cleaned = 0.000257471 Jy ! Total flux subtracted in 200 components = 0.000257471 Jy ! Clean residual min=-0.001950 max=0.001983 Jy/beam ! Clean residual mean=-0.000002 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.125705 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 120 components and 0.125705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097019Jy sigma=0.000775 ! Fit after self-cal, rms=0.097019Jy sigma=0.000775 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.429 mas, bpa=3.132 degrees ! Estimated noise=834.92 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.429 at 3.132 degrees (North through East) ! Clean map min=-0.002052 max=0.097664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.189 mas, bmaj=6.251 mas, bpa=2.232 degrees ! Estimated noise=1439.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0744605 Jy ! Component: 100 - total flux cleaned = 0.0933326 Jy ! Component: 150 - total flux cleaned = 0.101053 Jy ! Component: 200 - total flux cleaned = 0.106025 Jy ! Total flux subtracted in 200 components = 0.106025 Jy ! Clean residual min=-0.004232 max=0.003781 Jy/beam ! Clean residual mean=-0.000021 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.106025 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.106025 Jy ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.429 mas, bpa=3.132 degrees ! Estimated noise=834.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00657196 Jy ! Component: 100 - total flux cleaned = 0.0105113 Jy ! Component: 150 - total flux cleaned = 0.0133124 Jy ! Component: 200 - total flux cleaned = 0.0154078 Jy ! Total flux subtracted in 200 components = 0.0154078 Jy ! Clean residual min=-0.002621 max=0.001983 Jy/beam ! Clean residual mean=-0.000015 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.121433 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 63 components and 0.121433 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.637 mas, bmaj=19.85 mas, bpa=7.765 degrees ! Estimated noise=1077.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199911 Jy ! Component: 100 - total flux cleaned = 0.00286464 Jy ! Component: 150 - total flux cleaned = 0.0031265 Jy ! Component: 200 - total flux cleaned = 0.00336087 Jy ! Total flux subtracted in 200 components = 0.00336087 Jy ! Clean residual min=-0.002119 max=0.002121 Jy/beam ! Clean residual mean=-0.000007 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.124794 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196734 Jy ! Component: 100 - total flux cleaned = 0.000322832 Jy ! Component: 150 - total flux cleaned = 0.000386148 Jy ! Component: 200 - total flux cleaned = 0.000421983 Jy ! Total flux subtracted in 200 components = 0.000421983 Jy ! Clean residual min=-0.002027 max=0.002070 Jy/beam ! Clean residual mean=-0.000006 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.125216 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 98 components and 0.125216 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.429 mas, bpa=3.132 degrees ! Estimated noise=834.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167238 Jy ! Component: 100 - total flux cleaned = 6.64167e-05 Jy ! Component: 150 - total flux cleaned = 3.51437e-05 Jy ! Component: 200 - total flux cleaned = 3.47878e-05 Jy ! Total flux subtracted in 200 components = 3.47878e-05 Jy ! Clean residual min=-0.002281 max=0.001969 Jy/beam ! Clean residual mean=-0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.12525 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 0.12525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097027Jy sigma=0.000775 ! Fit after self-cal, rms=0.097030Jy sigma=0.000775 wmodel J1331-2639_S_2015_01_22_pus_map.mod ! Writing 124 model components to file: J1331-2639_S_2015_01_22_pus_map.mod wobs J1331-2639_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1331-2639_S_2015_01_22_pus_uvs.fits wwins J1331-2639_S_2015_01_22_pus_map.win ! wwins: Wrote 3 windows to J1331-2639_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000687353 Jy ! Component: 100 - total flux cleaned = -0.00079389 Jy ! Component: 150 - total flux cleaned = -0.000636945 Jy ! Component: 200 - total flux cleaned = -0.000547131 Jy ! Component: 250 - total flux cleaned = -0.000490535 Jy ! Component: 300 - total flux cleaned = -0.000489369 Jy ! Component: 350 - total flux cleaned = -0.000515847 Jy ! Component: 400 - total flux cleaned = -0.000540684 Jy ! Component: 450 - total flux cleaned = -0.00058862 Jy ! Component: 500 - total flux cleaned = -0.000681007 Jy ! Component: 550 - total flux cleaned = -0.000747926 Jy ! Component: 600 - total flux cleaned = -0.000791308 Jy ! Component: 650 - total flux cleaned = -0.000854556 Jy ! Component: 700 - total flux cleaned = -0.000916295 Jy ! Component: 750 - total flux cleaned = -0.000996522 Jy ! Component: 800 - total flux cleaned = -0.00109421 Jy ! Component: 850 - total flux cleaned = -0.0011704 Jy ! Component: 900 - total flux cleaned = -0.00124497 Jy ! Component: 950 - total flux cleaned = -0.00126316 Jy ! Component: 1000 - total flux cleaned = -0.0012812 Jy ! Component: 1050 - total flux cleaned = -0.00128118 Jy ! Component: 1100 - total flux cleaned = -0.00128104 Jy ! Component: 1150 - total flux cleaned = -0.00126399 Jy ! Component: 1200 - total flux cleaned = -0.00128054 Jy ! Component: 1250 - total flux cleaned = -0.00124783 Jy ! Component: 1300 - total flux cleaned = -0.00124816 Jy ! Component: 1350 - total flux cleaned = -0.00124831 Jy ! Component: 1400 - total flux cleaned = -0.00124854 Jy ! Component: 1450 - total flux cleaned = -0.00126385 Jy ! Component: 1500 - total flux cleaned = -0.00123392 Jy ! Component: 1550 - total flux cleaned = -0.00123394 Jy ! Component: 1600 - total flux cleaned = -0.00121936 Jy ! Component: 1650 - total flux cleaned = -0.00123368 Jy ! Component: 1700 - total flux cleaned = -0.00121934 Jy ! Component: 1750 - total flux cleaned = -0.00121932 Jy ! Component: 1800 - total flux cleaned = -0.00123322 Jy ! Component: 1850 - total flux cleaned = -0.00123338 Jy ! Component: 1900 - total flux cleaned = -0.00117932 Jy ! Component: 1950 - total flux cleaned = -0.00113924 Jy ! Component: 2000 - total flux cleaned = -0.00105957 Jy ! Component: 2050 - total flux cleaned = -0.00104649 Jy ! Component: 2100 - total flux cleaned = -0.000968423 Jy ! Component: 2150 - total flux cleaned = -0.000929773 Jy ! Component: 2200 - total flux cleaned = -0.000878629 Jy ! Component: 2250 - total flux cleaned = -0.000827895 Jy ! Component: 2300 - total flux cleaned = -0.000727155 Jy ! Component: 2350 - total flux cleaned = -0.000652273 Jy ! Component: 2400 - total flux cleaned = -0.000615103 Jy ! Component: 2450 - total flux cleaned = -0.000553498 Jy ! Component: 2500 - total flux cleaned = -0.000443705 Jy ! Component: 2550 - total flux cleaned = -0.000383039 Jy ! Component: 2600 - total flux cleaned = -0.000310856 Jy ! Component: 2650 - total flux cleaned = -0.000227122 Jy ! Component: 2700 - total flux cleaned = -0.000167632 Jy ! Component: 2750 - total flux cleaned = -2.58144e-05 Jy ! Component: 2800 - total flux cleaned = 7.98997e-05 Jy ! Component: 2850 - total flux cleaned = 0.00016172 Jy ! Component: 2900 - total flux cleaned = 0.000277835 Jy ! Component: 2950 - total flux cleaned = 0.00034723 Jy ! Component: 3000 - total flux cleaned = 0.00043921 Jy ! Component: 3050 - total flux cleaned = 0.000542211 Jy ! Component: 3100 - total flux cleaned = 0.000621902 Jy ! Component: 3150 - total flux cleaned = 0.000689938 Jy ! Component: 3200 - total flux cleaned = 0.000735115 Jy ! Component: 3250 - total flux cleaned = 0.000813948 Jy ! Component: 3300 - total flux cleaned = 0.000914826 Jy ! Component: 3350 - total flux cleaned = 0.000970676 Jy ! Component: 3400 - total flux cleaned = 0.00105989 Jy ! Component: 3450 - total flux cleaned = 0.00111548 Jy ! Component: 3500 - total flux cleaned = 0.00121528 Jy ! Component: 3550 - total flux cleaned = 0.00127057 Jy ! Component: 3600 - total flux cleaned = 0.00136985 Jy ! Component: 3650 - total flux cleaned = 0.00145786 Jy ! Component: 3700 - total flux cleaned = 0.00152376 Jy ! Component: 3750 - total flux cleaned = 0.00160053 Jy ! Component: 3800 - total flux cleaned = 0.00169905 Jy ! Component: 3850 - total flux cleaned = 0.00176465 Jy ! Component: 3900 - total flux cleaned = 0.0018411 Jy ! Component: 3950 - total flux cleaned = 0.00190657 Jy ! Component: 4000 - total flux cleaned = 0.00193931 Jy ! Component: 4050 - total flux cleaned = 0.00203732 Jy ! Total flux subtracted in 4096 components = 0.00208085 Jy ! Clean residual min=-0.000668 max=0.000618 Jy/beam ! Clean residual mean=0.000007 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.127331 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 420 components and 0.127331 Jy ![Exited script file: muppet] wmap "J1331-2639_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.429 at 3.132 degrees (North through East) ! Clean map min=-0.0015517 max=0.098367 Jy/beam ! Writing clean map to FITS file: J1331-2639_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0983672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000190981 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.582453 0.582453 1.16491 2.32981 4.65962 9.31925 18.6385 37.277 74.554 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.098 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.833 x 7.429 at 3.132 degrees (North through East) ! Clean map min=-0.0015517 max=0.098367 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1331-2639_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:30 2017