! Started logfile: J1330-3122_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:17 2017 obs J1330-3122_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1330-3122_S_2015_01_22_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J1330-3122 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1330-3122_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.634728Jy sigma=0.005421 ! Fit after self-cal, rms=0.618756Jy sigma=0.005290 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.253 mas, bmaj=6.729 mas, bpa=-5.53 degrees ! Estimated noise=2030.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294443 Jy ! Component: 100 - total flux cleaned = 0.36107 Jy ! Total flux subtracted in 100 components = 0.36107 Jy ! Clean residual min=-0.020866 max=0.028810 Jy/beam ! Clean residual mean=-0.000025 rms=0.005225 Jy/beam ! Combined flux in latest and established models = 0.36107 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.36107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127128Jy sigma=0.001009 ! Fit after self-cal, rms=0.127124Jy sigma=0.001009 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.756 mas, bmaj=7.718 mas, bpa=-5.394 degrees ! Estimated noise=1293.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039615 Jy ! Component: 100 - total flux cleaned = 0.0595653 Jy ! Component: 150 - total flux cleaned = 0.0709282 Jy ! Component: 200 - total flux cleaned = 0.0775796 Jy ! Total flux subtracted in 200 components = 0.0775796 Jy ! Clean residual min=-0.015759 max=0.018149 Jy/beam ! Clean residual mean=0.000007 rms=0.003943 Jy/beam ! Combined flux in latest and established models = 0.43865 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 33 components and 0.43865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114964Jy sigma=0.000894 ! Fit after self-cal, rms=0.114957Jy sigma=0.000894 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.18 KP 1.06 ! LA 1.06 MK 0.99 NL 1.11 OV 0.94 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.21 KP 0.99 ! LA 1.03 MK 0.99 NL 1.18 OV 0.97 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.19 KP 0.85 ! LA 0.81 MK 1.03 NL 1.12 OV 0.91 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.18 KP 0.79 ! LA 0.92 MK 1.04 NL 1.01 OV 0.96 ! PT 1.03 SC 0.95 ! ! ! Fit before self-cal, rms=0.114957Jy sigma=0.000894 ! Fit after self-cal, rms=0.103759Jy sigma=0.000780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.69 mas, bpa=-4.893 degrees ! Estimated noise=1302.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123788 Jy ! Component: 100 - total flux cleaned = -0.000403765 Jy ! Component: 150 - total flux cleaned = -0.00065823 Jy ! Component: 200 - total flux cleaned = -0.00083468 Jy ! Total flux subtracted in 200 components = -0.00083468 Jy ! Clean residual min=-0.004462 max=0.004244 Jy/beam ! Clean residual mean=-0.000009 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.437815 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.437815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103662Jy sigma=0.000779 ! Fit after self-cal, rms=0.103822Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103822Jy sigma=0.000779 ! Fit after self-cal, rms=0.103850Jy sigma=0.000779 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.781 mas, bmaj=7.684 mas, bpa=-4.863 degrees ! Estimated noise=1300.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000398807 Jy ! Component: 100 - total flux cleaned = -0.000621454 Jy ! Component: 150 - total flux cleaned = -0.000775324 Jy ! Component: 200 - total flux cleaned = -0.000921899 Jy ! Total flux subtracted in 200 components = -0.000921899 Jy ! Clean residual min=-0.004425 max=0.004195 Jy/beam ! Clean residual mean=-0.000009 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.436893 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.436893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103791Jy sigma=0.000778 ! Fit after self-cal, rms=0.103794Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137967 Jy ! Component: 100 - total flux cleaned = -0.000266296 Jy ! Component: 150 - total flux cleaned = -0.000388071 Jy ! Component: 200 - total flux cleaned = -0.000502865 Jy ! Total flux subtracted in 200 components = -0.000502865 Jy ! Clean residual min=-0.004380 max=0.004182 Jy/beam ! Clean residual mean=-0.000009 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.43639 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.43639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103761Jy sigma=0.000778 ! Fit after self-cal, rms=0.103762Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103762Jy sigma=0.000778 ! Fit after self-cal, rms=0.103846Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=7.684 mas, bpa=-4.851 degrees ! Estimated noise=1299.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00064713 Jy ! Component: 100 - total flux cleaned = -0.000799045 Jy ! Component: 150 - total flux cleaned = -0.000903672 Jy ! Component: 200 - total flux cleaned = -0.00100202 Jy ! Total flux subtracted in 200 components = -0.00100202 Jy ! Clean residual min=-0.004372 max=0.004162 Jy/beam ! Clean residual mean=-0.000009 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.435388 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.435388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103818Jy sigma=0.000778 ! Fit after self-cal, rms=0.103823Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.08641e-05 Jy ! Component: 100 - total flux cleaned = -0.000147482 Jy ! Component: 150 - total flux cleaned = -0.000231453 Jy ! Component: 200 - total flux cleaned = -0.000311258 Jy ! Total flux subtracted in 200 components = -0.000311258 Jy ! Clean residual min=-0.004328 max=0.004150 Jy/beam ! Clean residual mean=-0.000009 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.435077 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.435077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103806Jy sigma=0.000778 ! Fit after self-cal, rms=0.103808Jy sigma=0.000778 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103808Jy sigma=0.000778 ! Fit after self-cal, rms=0.103870Jy sigma=0.000778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.422 mas, bmaj=20.13 mas, bpa=-0.3695 degrees ! Estimated noise=1704.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00137839 Jy ! Component: 100 - total flux cleaned = -0.00141743 Jy ! Component: 150 - total flux cleaned = -0.00148279 Jy ! Component: 200 - total flux cleaned = -0.00147876 Jy ! Total flux subtracted in 200 components = -0.00147876 Jy ! Clean residual min=-0.003799 max=0.004159 Jy/beam ! Clean residual mean=-0.000017 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.433598 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 58 components and 0.433598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103858Jy sigma=0.000778 ! Fit after self-cal, rms=0.103860Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.53315e-05 Jy ! Component: 100 - total flux cleaned = 2.03729e-05 Jy ! Component: 150 - total flux cleaned = 2.38932e-05 Jy ! Component: 200 - total flux cleaned = 2.66069e-05 Jy ! Total flux subtracted in 200 components = 2.66069e-05 Jy ! Clean residual min=-0.003788 max=0.004124 Jy/beam ! Clean residual mean=-0.000017 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.433625 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 61 components and 0.433625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103865Jy sigma=0.000778 ! Fit after self-cal, rms=0.103865Jy sigma=0.000778 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.686 mas, bpa=-4.854 degrees ! Estimated noise=1299.37 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.686 at -4.854 degrees (North through East) ! Clean map min=-0.0039592 max=0.38353 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.263 mas, bmaj=6.654 mas, bpa=-4.927 degrees ! Estimated noise=2061.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298806 Jy ! Component: 100 - total flux cleaned = 0.366762 Jy ! Component: 150 - total flux cleaned = 0.393438 Jy ! Component: 200 - total flux cleaned = 0.407948 Jy ! Total flux subtracted in 200 components = 0.407948 Jy ! Clean residual min=-0.008871 max=0.007447 Jy/beam ! Clean residual mean=-0.000011 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.407948 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.407948 Jy ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.686 mas, bpa=-4.854 degrees ! Estimated noise=1299.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112644 Jy ! Component: 100 - total flux cleaned = 0.0169389 Jy ! Component: 150 - total flux cleaned = 0.0199443 Jy ! Component: 200 - total flux cleaned = 0.021572 Jy ! Total flux subtracted in 200 components = 0.021572 Jy ! Clean residual min=-0.004463 max=0.004181 Jy/beam ! Clean residual mean=-0.000012 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.42952 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 55 components and 0.42952 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.422 mas, bmaj=20.13 mas, bpa=-0.3695 degrees ! Estimated noise=1704.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00216978 Jy ! Component: 100 - total flux cleaned = 0.00227229 Jy ! Component: 150 - total flux cleaned = 0.002368 Jy ! Component: 200 - total flux cleaned = 0.00249824 Jy ! Total flux subtracted in 200 components = 0.00249824 Jy ! Clean residual min=-0.004221 max=0.004294 Jy/beam ! Clean residual mean=-0.000020 rms=0.001234 Jy/beam ! Combined flux in latest and established models = 0.432018 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.05245e-05 Jy ! Component: 100 - total flux cleaned = 0.000117813 Jy ! Component: 150 - total flux cleaned = 0.000189234 Jy ! Component: 200 - total flux cleaned = 0.000223411 Jy ! Total flux subtracted in 200 components = 0.000223411 Jy ! Clean residual min=-0.004206 max=0.004244 Jy/beam ! Clean residual mean=-0.000020 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.432241 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 59 components and 0.432241 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.686 mas, bpa=-4.854 degrees ! Estimated noise=1299.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000814577 Jy ! Component: 100 - total flux cleaned = -0.000870432 Jy ! Component: 150 - total flux cleaned = -0.000913002 Jy ! Component: 200 - total flux cleaned = -0.000987408 Jy ! Total flux subtracted in 200 components = -0.000987408 Jy ! Clean residual min=-0.004462 max=0.004089 Jy/beam ! Clean residual mean=-0.000010 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.431254 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.431254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103967Jy sigma=0.000778 ! Fit after self-cal, rms=0.103951Jy sigma=0.000778 wmodel J1330-3122_S_2015_01_22_pus_map.mod ! Writing 68 model components to file: J1330-3122_S_2015_01_22_pus_map.mod wobs J1330-3122_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1330-3122_S_2015_01_22_pus_uvs.fits wwins J1330-3122_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1330-3122_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181585 Jy ! Component: 100 - total flux cleaned = 0.000798545 Jy ! Component: 150 - total flux cleaned = 0.00143543 Jy ! Component: 200 - total flux cleaned = 0.00215631 Jy ! Component: 250 - total flux cleaned = 0.00284454 Jy ! Component: 300 - total flux cleaned = 0.00356108 Jy ! Component: 350 - total flux cleaned = 0.00414398 Jy ! Component: 400 - total flux cleaned = 0.00470852 Jy ! Component: 450 - total flux cleaned = 0.00530748 Jy ! Component: 500 - total flux cleaned = 0.0058899 Jy ! Component: 550 - total flux cleaned = 0.00641007 Jy ! Component: 600 - total flux cleaned = 0.00700931 Jy ! Component: 650 - total flux cleaned = 0.0074594 Jy ! Component: 700 - total flux cleaned = 0.0078992 Jy ! Component: 750 - total flux cleaned = 0.00828684 Jy ! Component: 800 - total flux cleaned = 0.00866603 Jy ! Component: 850 - total flux cleaned = 0.00891341 Jy ! Component: 900 - total flux cleaned = 0.00907447 Jy ! Component: 950 - total flux cleaned = 0.00931173 Jy ! Component: 1000 - total flux cleaned = 0.00950537 Jy ! Component: 1050 - total flux cleaned = 0.00973411 Jy ! Component: 1100 - total flux cleaned = 0.00995834 Jy ! Component: 1150 - total flux cleaned = 0.0101795 Jy ! Component: 1200 - total flux cleaned = 0.0103606 Jy ! Component: 1250 - total flux cleaned = 0.010716 Jy ! Component: 1300 - total flux cleaned = 0.0108907 Jy ! Component: 1350 - total flux cleaned = 0.0111652 Jy ! Component: 1400 - total flux cleaned = 0.0114016 Jy ! Component: 1450 - total flux cleaned = 0.0115345 Jy ! Component: 1500 - total flux cleaned = 0.0117967 Jy ! Component: 1550 - total flux cleaned = 0.012022 Jy ! Component: 1600 - total flux cleaned = 0.0121485 Jy ! Component: 1650 - total flux cleaned = 0.0124601 Jy ! Component: 1700 - total flux cleaned = 0.0126433 Jy ! Component: 1750 - total flux cleaned = 0.0127636 Jy ! Component: 1800 - total flux cleaned = 0.0129418 Jy ! Component: 1850 - total flux cleaned = 0.0129413 Jy ! Component: 1900 - total flux cleaned = 0.0130859 Jy ! Component: 1950 - total flux cleaned = 0.0131715 Jy ! Component: 2000 - total flux cleaned = 0.0132558 Jy ! Component: 2050 - total flux cleaned = 0.013394 Jy ! Component: 2100 - total flux cleaned = 0.0135577 Jy ! Component: 2150 - total flux cleaned = 0.0136922 Jy ! Component: 2200 - total flux cleaned = 0.0136926 Jy ! Component: 2250 - total flux cleaned = 0.0139286 Jy ! Component: 2300 - total flux cleaned = 0.0139542 Jy ! Component: 2350 - total flux cleaned = 0.0140566 Jy ! Component: 2400 - total flux cleaned = 0.0141581 Jy ! Component: 2450 - total flux cleaned = 0.0142083 Jy ! Component: 2500 - total flux cleaned = 0.0142333 Jy ! Component: 2550 - total flux cleaned = 0.0143556 Jy ! Component: 2600 - total flux cleaned = 0.0144041 Jy ! Component: 2650 - total flux cleaned = 0.0145 Jy ! Component: 2700 - total flux cleaned = 0.0146421 Jy ! Component: 2750 - total flux cleaned = 0.0148059 Jy ! Component: 2800 - total flux cleaned = 0.0149683 Jy ! Component: 2850 - total flux cleaned = 0.0149914 Jy ! Component: 2900 - total flux cleaned = 0.0151055 Jy ! Component: 2950 - total flux cleaned = 0.0152409 Jy ! Component: 3000 - total flux cleaned = 0.0153751 Jy ! Component: 3050 - total flux cleaned = 0.015375 Jy ! Component: 3100 - total flux cleaned = 0.0155506 Jy ! Component: 3150 - total flux cleaned = 0.0156593 Jy ! Component: 3200 - total flux cleaned = 0.0156377 Jy ! Component: 3250 - total flux cleaned = 0.0157233 Jy ! Component: 3300 - total flux cleaned = 0.0158079 Jy ! Component: 3350 - total flux cleaned = 0.015871 Jy ! Component: 3400 - total flux cleaned = 0.0159337 Jy ! Component: 3450 - total flux cleaned = 0.0160163 Jy ! Component: 3500 - total flux cleaned = 0.0160779 Jy ! Component: 3550 - total flux cleaned = 0.0160576 Jy ! Component: 3600 - total flux cleaned = 0.0161183 Jy ! Component: 3650 - total flux cleaned = 0.0162388 Jy ! Component: 3700 - total flux cleaned = 0.0162989 Jy ! Component: 3750 - total flux cleaned = 0.0163583 Jy ! Component: 3800 - total flux cleaned = 0.0164171 Jy ! Component: 3850 - total flux cleaned = 0.0164756 Jy ! Component: 3900 - total flux cleaned = 0.0165144 Jy ! Component: 3950 - total flux cleaned = 0.0165916 Jy ! Component: 4000 - total flux cleaned = 0.0166491 Jy ! Component: 4050 - total flux cleaned = 0.0166874 Jy ! Total flux subtracted in 4096 components = 0.0167633 Jy ! Clean residual min=-0.001101 max=0.001241 Jy/beam ! Clean residual mean=-0.000000 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.448017 Jy keep ! Adding 240 model components to the UV plane model. ! The established model now contains 308 components and 0.448017 Jy ![Exited script file: muppet] wmap "J1330-3122_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.686 at -4.854 degrees (North through East) ! Clean map min=-0.0020521 max=0.38778 Jy/beam ! Writing clean map to FITS file: J1330-3122_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.387779 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000325311 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.251673 0.251673 0.503345 1.00669 2.01338 4.02676 8.05352 16.107 32.2141 64.4282 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.387 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.783 x 7.686 at -4.854 degrees (North through East) ! Clean map min=-0.0020521 max=0.38778 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1330-3122_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:23 2017