! Started logfile: J1330+2509_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:54:48 2016 obs J1330+2509_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1330+2509_S_2014_06_09_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.787021 visibilities/baseline/integration-bin. ! Found source: J1330+2509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 16008 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1330+2509_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915431Jy sigma=0.010816 ! Fit after self-cal, rms=0.872017Jy sigma=0.010289 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.01 mas, bmaj=5.601 mas, bpa=-8.295 degrees ! Estimated noise=771.449 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.268094 Jy ! Component: 100 - total flux cleaned = 0.434259 Jy ! Total flux subtracted in 100 components = 0.434259 Jy ! Clean residual min=-0.067917 max=0.139763 Jy/beam ! Clean residual mean=-0.000947 rms=0.025197 Jy/beam ! Combined flux in latest and established models = 0.434259 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.434259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612367Jy sigma=0.007810 ! Fit after self-cal, rms=0.611604Jy sigma=0.007802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=6.818 mas, bpa=-8.074 degrees ! Estimated noise=476.254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267555 Jy ! Component: 100 - total flux cleaned = 0.428353 Jy ! Component: 150 - total flux cleaned = 0.528381 Jy ! Component: 200 - total flux cleaned = 0.590859 Jy ! Total flux subtracted in 200 components = 0.590859 Jy ! Clean residual min=-0.131050 max=0.187202 Jy/beam ! Clean residual mean=-0.001077 rms=0.040876 Jy/beam ! Combined flux in latest and established models = 1.02512 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 61 components and 1.02512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.487060Jy sigma=0.006150 ! Fit after self-cal, rms=0.485588Jy sigma=0.006137 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.84 HN 1.46 KP 1.10 ! LA 0.74 MK 4.80 NL 1.86 OV 1.97 ! PT 0.61 SC 3.67 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.50 KP 1.08 ! LA 0.72 MK 4.78 NL 2.07 OV 2.08 ! PT 0.60 SC 3.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.16 HN 1.45 KP 0.98 ! LA 0.58 MK 5.20 NL 2.03 OV 1.99 ! PT 0.59 SC 4.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.42 KP 0.96 ! LA 0.57 MK 4.46 NL 2.16 OV 2.10 ! PT 0.63 SC 4.55 ! ! ! Fit before self-cal, rms=0.485588Jy sigma=0.006137 ! Fit after self-cal, rms=0.634114Jy sigma=0.003712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.644 mas, bmaj=10.05 mas, bpa=-10.99 degrees ! Estimated noise=724.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00352508 Jy ! Component: 100 - total flux cleaned = 0.00161672 Jy ! Component: 150 - total flux cleaned = 0.00244195 Jy ! Component: 200 - total flux cleaned = 0.00236733 Jy ! Total flux subtracted in 200 components = 0.00236733 Jy ! Clean residual min=-0.121655 max=0.123967 Jy/beam ! Clean residual mean=-0.000223 rms=0.037221 Jy/beam ! Combined flux in latest and established models = 1.02749 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 1.02749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.631784Jy sigma=0.003683 ! Fit after self-cal, rms=0.642524Jy sigma=0.003629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642524Jy sigma=0.003629 ! Fit after self-cal, rms=0.645156Jy sigma=0.002874 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.636 mas, bmaj=9.048 mas, bpa=-15.2 degrees ! Estimated noise=742.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00570934 Jy ! Component: 100 - total flux cleaned = 0.00685214 Jy ! Component: 150 - total flux cleaned = 0.00829361 Jy ! Component: 200 - total flux cleaned = 0.00871492 Jy ! Total flux subtracted in 200 components = 0.00871492 Jy ! Clean residual min=-0.096357 max=0.109005 Jy/beam ! Clean residual mean=-0.000122 rms=0.029380 Jy/beam ! Combined flux in latest and established models = 1.0362 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 71 components and 1.0362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642835Jy sigma=0.002873 ! Fit after self-cal, rms=0.655888Jy sigma=0.002866 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00304537 Jy ! Component: 100 - total flux cleaned = -0.00184806 Jy ! Component: 150 - total flux cleaned = -0.000279671 Jy ! Component: 200 - total flux cleaned = 0.000640308 Jy ! Total flux subtracted in 200 components = 0.000640308 Jy ! Clean residual min=-0.097987 max=0.110571 Jy/beam ! Clean residual mean=-0.000123 rms=0.029442 Jy/beam ! Combined flux in latest and established models = 1.03684 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 1.03684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653291Jy sigma=0.002865 ! Fit after self-cal, rms=0.654573Jy sigma=0.002860 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.654573Jy sigma=0.002860 ! Fit after self-cal, rms=0.622822Jy sigma=0.002858 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.39 mas, bmaj=8.598 mas, bpa=-12.75 degrees ! Estimated noise=723.899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360372 Jy ! Component: 100 - total flux cleaned = 0.00462499 Jy ! Component: 150 - total flux cleaned = 0.00551308 Jy ! Component: 200 - total flux cleaned = 0.00631741 Jy ! Total flux subtracted in 200 components = 0.00631741 Jy ! Clean residual min=-0.096999 max=0.106322 Jy/beam ! Clean residual mean=-0.000116 rms=0.028617 Jy/beam ! Combined flux in latest and established models = 1.04316 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 1.04316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.620909Jy sigma=0.002857 ! Fit after self-cal, rms=0.621392Jy sigma=0.002854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.09669e-06 Jy ! Component: 100 - total flux cleaned = -3.34511e-05 Jy ! Component: 150 - total flux cleaned = 0.00032617 Jy ! Component: 200 - total flux cleaned = 0.00100547 Jy ! Total flux subtracted in 200 components = 0.00100547 Jy ! Clean residual min=-0.097287 max=0.106630 Jy/beam ! Clean residual mean=-0.000114 rms=0.028616 Jy/beam ! Combined flux in latest and established models = 1.04416 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 1.04416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.619834Jy sigma=0.002856 ! Fit after self-cal, rms=0.620327Jy sigma=0.002853 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.620327Jy sigma=0.002853 ! Fit after self-cal, rms=0.655366Jy sigma=0.002851 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.39 mas, bmaj=14.88 mas, bpa=-36.59 degrees ! Estimated noise=615.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429774 Jy ! Component: 100 - total flux cleaned = 0.0042484 Jy ! Component: 150 - total flux cleaned = 0.00524518 Jy ! Component: 200 - total flux cleaned = 0.00582589 Jy ! Total flux subtracted in 200 components = 0.00582589 Jy ! Clean residual min=-0.128464 max=0.132643 Jy/beam ! Clean residual mean=-0.000150 rms=0.038037 Jy/beam ! Combined flux in latest and established models = 1.04999 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 76 components and 1.04999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653960Jy sigma=0.002862 ! Fit after self-cal, rms=0.654495Jy sigma=0.002859 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000640362 Jy ! Component: 100 - total flux cleaned = -0.000641037 Jy ! Component: 150 - total flux cleaned = -0.000647083 Jy ! Component: 200 - total flux cleaned = 0.000134296 Jy ! Total flux subtracted in 200 components = 0.000134296 Jy ! Clean residual min=-0.129108 max=0.133362 Jy/beam ! Clean residual mean=-0.000149 rms=0.038032 Jy/beam ! Combined flux in latest and established models = 1.05012 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 77 components and 1.05012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653636Jy sigma=0.002864 ! Fit after self-cal, rms=0.653919Jy sigma=0.002862 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.535 mas, bmaj=8.818 mas, bpa=-14.4 degrees ! Estimated noise=739.515 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.535 x 8.818 at -14.4 degrees (North through East) ! Clean map min=-0.10116 max=0.53903 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.653919Jy sigma=0.002862 ! Fit after self-cal, rms=1.083285Jy sigma=0.002838 ! Inverting map and beam ! Estimated beam: bmin=5.838 mas, bmaj=9.265 mas, bpa=-14.35 degrees ! Estimated noise=765.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481817 Jy ! Component: 100 - total flux cleaned = 0.00487261 Jy ! Component: 150 - total flux cleaned = 0.00519267 Jy ! Component: 200 - total flux cleaned = 0.00579508 Jy ! Total flux subtracted in 200 components = 0.00579508 Jy ! Clean residual min=-0.101737 max=0.112615 Jy/beam ! Clean residual mean=-0.000104 rms=0.030222 Jy/beam ! Combined flux in latest and established models = 1.05592 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 78 components and 1.05592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082481Jy sigma=0.002837 ! Fit after self-cal, rms=1.082560Jy sigma=0.002834 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681724 Jy ! Component: 100 - total flux cleaned = 0.000270231 Jy ! Component: 150 - total flux cleaned = 0.000302679 Jy ! Component: 200 - total flux cleaned = 0.000292486 Jy ! Total flux subtracted in 200 components = 0.000292486 Jy ! Clean residual min=-0.102017 max=0.112551 Jy/beam ! Clean residual mean=-0.000102 rms=0.030222 Jy/beam ! Combined flux in latest and established models = 1.05621 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 80 components and 1.05621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.081830Jy sigma=0.002837 ! Fit after self-cal, rms=1.082042Jy sigma=0.002833 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.082042Jy sigma=0.002833 ! Fit after self-cal, rms=1.196683Jy sigma=0.002832 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.239 mas, bmaj=7.041 mas, bpa=-14.63 degrees ! Estimated noise=1756.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51283 Jy ! Component: 100 - total flux cleaned = 0.74583 Jy ! Component: 150 - total flux cleaned = 0.875132 Jy ! Component: 200 - total flux cleaned = 0.949468 Jy ! Total flux subtracted in 200 components = 0.949468 Jy ! Clean residual min=-0.077283 max=0.092095 Jy/beam ! Clean residual mean=-0.000361 rms=0.024132 Jy/beam ! Combined flux in latest and established models = 0.949468 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 52 model components to the UV plane model. ! The established model now contains 52 components and 0.949468 Jy ! Inverting map and beam ! Estimated beam: bmin=5.905 mas, bmaj=9.472 mas, bpa=-16.88 degrees ! Estimated noise=776.534 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0581498 Jy ! Component: 100 - total flux cleaned = 0.0823703 Jy ! Component: 150 - total flux cleaned = 0.0851133 Jy ! Component: 200 - total flux cleaned = 0.0876488 Jy ! Total flux subtracted in 200 components = 0.0876488 Jy ! Clean residual min=-0.104896 max=0.112992 Jy/beam ! Clean residual mean=-0.000159 rms=0.030823 Jy/beam ! Combined flux in latest and established models = 1.03712 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 1.03712 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.69 mas, bmaj=15.25 mas, bpa=-38.44 degrees ! Estimated noise=625.647 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160377 Jy ! Component: 100 - total flux cleaned = 0.016765 Jy ! Component: 150 - total flux cleaned = 0.0171308 Jy ! Component: 200 - total flux cleaned = 0.0178224 Jy ! Total flux subtracted in 200 components = 0.0178224 Jy ! Clean residual min=-0.129869 max=0.133739 Jy/beam ! Clean residual mean=-0.000146 rms=0.038703 Jy/beam ! Combined flux in latest and established models = 1.05494 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613414 Jy ! Component: 100 - total flux cleaned = 0.000917279 Jy ! Component: 150 - total flux cleaned = 0.00153643 Jy ! Component: 200 - total flux cleaned = 0.00210915 Jy ! Total flux subtracted in 200 components = 0.00210915 Jy ! Clean residual min=-0.130005 max=0.134306 Jy/beam ! Clean residual mean=-0.000142 rms=0.038705 Jy/beam ! Combined flux in latest and established models = 1.05705 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 1.05705 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.905 mas, bmaj=9.472 mas, bpa=-16.88 degrees ! Estimated noise=776.534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00784987 Jy ! Component: 100 - total flux cleaned = -0.00690174 Jy ! Component: 150 - total flux cleaned = -0.00604433 Jy ! Component: 200 - total flux cleaned = -0.00489073 Jy ! Total flux subtracted in 200 components = -0.00489073 Jy ! Clean residual min=-0.105135 max=0.113918 Jy/beam ! Clean residual mean=-0.000123 rms=0.030670 Jy/beam ! Combined flux in latest and established models = 1.05216 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 1.05216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.197748Jy sigma=0.002837 ! Fit after self-cal, rms=1.197143Jy sigma=0.002833 wmodel J1330+2509_S_2014_06_09_pus_map.mod ! Writing 60 model components to file: J1330+2509_S_2014_06_09_pus_map.mod wobs J1330+2509_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1330+2509_S_2014_06_09_pus_uvs.fits wwins J1330+2509_S_2014_06_09_pus_map.win ! wwins: Wrote 1 windows to J1330+2509_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137285 Jy ! Component: 100 - total flux cleaned = 0.0219398 Jy ! Component: 150 - total flux cleaned = 0.0234573 Jy ! Component: 200 - total flux cleaned = 0.031481 Jy ! Component: 250 - total flux cleaned = 0.0366484 Jy ! Component: 300 - total flux cleaned = 0.0342934 Jy ! Component: 350 - total flux cleaned = 0.0332047 Jy ! Component: 400 - total flux cleaned = 0.0354079 Jy ! Component: 450 - total flux cleaned = 0.0343512 Jy ! Component: 500 - total flux cleaned = 0.0313178 Jy ! Component: 550 - total flux cleaned = 0.0274021 Jy ! Component: 600 - total flux cleaned = 0.0226726 Jy ! Component: 650 - total flux cleaned = 0.0181014 Jy ! Component: 700 - total flux cleaned = 0.014576 Jy ! Component: 750 - total flux cleaned = 0.0102616 Jy ! Component: 800 - total flux cleaned = 0.00525781 Jy ! Component: 850 - total flux cleaned = -0.00204295 Jy ! Component: 900 - total flux cleaned = -0.00597056 Jy ! Component: 950 - total flux cleaned = -0.0105836 Jy ! Component: 1000 - total flux cleaned = -0.0158245 Jy ! Component: 1050 - total flux cleaned = -0.0194512 Jy ! Component: 1100 - total flux cleaned = -0.0222794 Jy ! Component: 1150 - total flux cleaned = -0.025751 Jy ! Component: 1200 - total flux cleaned = -0.0284384 Jy ! Component: 1250 - total flux cleaned = -0.0303944 Jy ! Component: 1300 - total flux cleaned = -0.0297554 Jy ! Component: 1350 - total flux cleaned = -0.0322875 Jy ! Component: 1400 - total flux cleaned = -0.0310589 Jy ! Component: 1450 - total flux cleaned = -0.0310761 Jy ! Component: 1500 - total flux cleaned = -0.0334241 Jy ! Component: 1550 - total flux cleaned = -0.0328387 Jy ! Component: 1600 - total flux cleaned = -0.0328357 Jy ! Component: 1650 - total flux cleaned = -0.03449 Jy ! Component: 1700 - total flux cleaned = -0.032323 Jy ! Component: 1750 - total flux cleaned = -0.0339205 Jy ! Component: 1800 - total flux cleaned = -0.034447 Jy ! Component: 1850 - total flux cleaned = -0.0344444 Jy ! Component: 1900 - total flux cleaned = -0.0364524 Jy ! Component: 1950 - total flux cleaned = -0.0364551 Jy ! Component: 2000 - total flux cleaned = -0.0369497 Jy ! Component: 2050 - total flux cleaned = -0.0398099 Jy ! Component: 2100 - total flux cleaned = -0.0393435 Jy ! Component: 2150 - total flux cleaned = -0.0384108 Jy ! Component: 2200 - total flux cleaned = -0.0379567 Jy ! Component: 2250 - total flux cleaned = -0.03662 Jy ! Component: 2300 - total flux cleaned = -0.0374901 Jy ! Component: 2350 - total flux cleaned = -0.0361934 Jy ! Component: 2400 - total flux cleaned = -0.0361974 Jy ! Component: 2450 - total flux cleaned = -0.0357855 Jy ! Component: 2500 - total flux cleaned = -0.0353721 Jy ! Component: 2550 - total flux cleaned = -0.0345488 Jy ! Component: 2600 - total flux cleaned = -0.0341364 Jy ! Component: 2650 - total flux cleaned = -0.0321268 Jy ! Component: 2700 - total flux cleaned = -0.0317263 Jy ! Component: 2750 - total flux cleaned = -0.0301615 Jy ! Component: 2800 - total flux cleaned = -0.0305462 Jy ! Component: 2850 - total flux cleaned = -0.028636 Jy ! Component: 2900 - total flux cleaned = -0.0278849 Jy ! Component: 2950 - total flux cleaned = -0.0267717 Jy ! Component: 3000 - total flux cleaned = -0.0256764 Jy ! Component: 3050 - total flux cleaned = -0.0260361 Jy ! Component: 3100 - total flux cleaned = -0.0256745 Jy ! Component: 3150 - total flux cleaned = -0.0239044 Jy ! Component: 3200 - total flux cleaned = -0.0232012 Jy ! Component: 3250 - total flux cleaned = -0.0221555 Jy ! Component: 3300 - total flux cleaned = -0.0204405 Jy ! Component: 3350 - total flux cleaned = -0.0201051 Jy ! Component: 3400 - total flux cleaned = -0.0194328 Jy ! Component: 3450 - total flux cleaned = -0.0180979 Jy ! Component: 3500 - total flux cleaned = -0.0174394 Jy ! Component: 3550 - total flux cleaned = -0.0161344 Jy ! Component: 3600 - total flux cleaned = -0.0154872 Jy ! Component: 3650 - total flux cleaned = -0.0135712 Jy ! Component: 3700 - total flux cleaned = -0.0132577 Jy ! Component: 3750 - total flux cleaned = -0.0126299 Jy ! Component: 3800 - total flux cleaned = -0.0113948 Jy ! Component: 3850 - total flux cleaned = -0.0104748 Jy ! Component: 3900 - total flux cleaned = -0.0110823 Jy ! Component: 3950 - total flux cleaned = -0.0104794 Jy ! Component: 4000 - total flux cleaned = -0.00988302 Jy ! Component: 4050 - total flux cleaned = -0.0104766 Jy ! Total flux subtracted in 4096 components = -0.0101813 Jy ! Clean residual min=-0.016526 max=0.015441 Jy/beam ! Clean residual mean=-0.000032 rms=0.006354 Jy/beam ! Combined flux in latest and established models = 1.04198 Jy keep ! Adding 531 model components to the UV plane model. ! The established model now contains 591 components and 1.04198 Jy ![Exited script file: muppet] wmap "J1330+2509_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.905 x 9.472 at -16.88 degrees (North through East) ! Clean map min=-0.052589 max=0.60303 Jy/beam ! Writing clean map to FITS file: J1330+2509_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.603029 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00632776 device "J1330+2509_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1330+2509_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.14799 3.14799 6.29597 12.5919 25.1839 50.3678 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0189 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.603 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.905 x 9.472 at -16.88 degrees (North through East) ! Clean map min=-0.052589 max=0.60303 Jy/beam quit ! Quitting program ! Log file J1330+2509_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:54:54 2016