! Started logfile: J1327+2210_S_2014_06_09_pus_uvs.log on Wed Nov 16 19:54:44 2016 obs J1327+2210_S_2014_06_09_pus_uva.fits ! Reading UV FITS file: J1327+2210_S_2014_06_09_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.768056 visibilities/baseline/integration-bin. ! Found source: J1327+2210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 2212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1327+2210_S_2014_06_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.193775Jy sigma=0.002157 ! Fit after self-cal, rms=0.150364Jy sigma=0.001597 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.163 mas, bmaj=8.125 mas, bpa=19.37 degrees ! Estimated noise=1766.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.740231 Jy ! Component: 100 - total flux cleaned = 0.905042 Jy ! Total flux subtracted in 100 components = 0.905042 Jy ! Clean residual min=-0.028339 max=0.056602 Jy/beam ! Clean residual mean=-0.000102 rms=0.009856 Jy/beam ! Combined flux in latest and established models = 0.905041 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.905041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162812Jy sigma=0.001735 ! Fit after self-cal, rms=0.162815Jy sigma=0.001735 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.759 mas, bmaj=9.132 mas, bpa=17.98 degrees ! Estimated noise=1328.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0762176 Jy ! Component: 100 - total flux cleaned = 0.111449 Jy ! Component: 150 - total flux cleaned = 0.13123 Jy ! Component: 200 - total flux cleaned = 0.142985 Jy ! Total flux subtracted in 200 components = 0.142985 Jy ! Clean residual min=-0.020580 max=0.018860 Jy/beam ! Clean residual mean=0.000023 rms=0.004862 Jy/beam ! Combined flux in latest and established models = 1.04803 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 1.04803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122282Jy sigma=0.001330 ! Fit after self-cal, rms=0.122195Jy sigma=0.001328 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 0.95 KP 1.04 ! LA 1.17 MK 1.05 NL 0.96 OV 0.97 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00 KP 1.01 ! LA 1.13 MK 1.05 NL 1.02 OV 1.01 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.01 KP 0.92 ! LA 0.89 MK 1.06 NL 0.98 OV 0.93 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.99 KP 0.88 ! LA 0.87 MK 1.07 NL 1.06 OV 1.00 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.122195Jy sigma=0.001328 ! Fit after self-cal, rms=0.071321Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=9.14 mas, bpa=17.97 degrees ! Estimated noise=1325.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31, 55.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758712 Jy ! Component: 100 - total flux cleaned = 0.00920634 Jy ! Component: 150 - total flux cleaned = 0.00994158 Jy ! Component: 200 - total flux cleaned = 0.0103061 Jy ! Total flux subtracted in 200 components = 0.0103061 Jy ! Clean residual min=-0.005130 max=0.004060 Jy/beam ! Clean residual mean=-0.000004 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 1.05833 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 1.05833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070295Jy sigma=0.000770 ! Fit after self-cal, rms=0.070289Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070289Jy sigma=0.000770 ! Fit after self-cal, rms=0.070277Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=9.14 mas, bpa=17.96 degrees ! Estimated noise=1324.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125551 Jy ! Component: 100 - total flux cleaned = 0.00161938 Jy ! Component: 150 - total flux cleaned = 0.00161424 Jy ! Component: 200 - total flux cleaned = 0.00162227 Jy ! Total flux subtracted in 200 components = 0.00162227 Jy ! Clean residual min=-0.004253 max=0.003638 Jy/beam ! Clean residual mean=-0.000005 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 1.05995 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 1.05995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070088Jy sigma=0.000767 ! Fit after self-cal, rms=0.070083Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.10302e-05 Jy ! Component: 100 - total flux cleaned = -6.81438e-05 Jy ! Component: 150 - total flux cleaned = -6.81652e-05 Jy ! Component: 200 - total flux cleaned = -0.000115903 Jy ! Total flux subtracted in 200 components = -0.000115903 Jy ! Clean residual min=-0.003881 max=0.003749 Jy/beam ! Clean residual mean=-0.000005 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 1.05984 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 1.05984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070009Jy sigma=0.000767 ! Fit after self-cal, rms=0.070007Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070007Jy sigma=0.000767 ! Fit after self-cal, rms=0.070030Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.785 mas, bmaj=9.14 mas, bpa=17.95 degrees ! Estimated noise=1325.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198932 Jy ! Component: 100 - total flux cleaned = 0.000286408 Jy ! Component: 150 - total flux cleaned = 0.000363696 Jy ! Component: 200 - total flux cleaned = 0.000293436 Jy ! Total flux subtracted in 200 components = 0.000293436 Jy ! Clean residual min=-0.003629 max=0.003770 Jy/beam ! Clean residual mean=-0.000005 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 1.06013 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 1.06013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069987Jy sigma=0.000766 ! Fit after self-cal, rms=0.069985Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.58889e-05 Jy ! Component: 100 - total flux cleaned = -8.59263e-05 Jy ! Component: 150 - total flux cleaned = -5.60692e-05 Jy ! Component: 200 - total flux cleaned = -8.539e-05 Jy ! Total flux subtracted in 200 components = -8.539e-05 Jy ! Clean residual min=-0.003498 max=0.003796 Jy/beam ! Clean residual mean=-0.000005 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 1.06005 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 1.06005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069961Jy sigma=0.000766 ! Fit after self-cal, rms=0.069961Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069961Jy sigma=0.000766 ! Fit after self-cal, rms=0.069968Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.026 mas, bmaj=14.41 mas, bpa=2.785 degrees ! Estimated noise=1572.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00038959 Jy ! Component: 100 - total flux cleaned = -0.000391355 Jy ! Component: 150 - total flux cleaned = -0.00032895 Jy ! Component: 200 - total flux cleaned = -0.000271692 Jy ! Total flux subtracted in 200 components = -0.000271692 Jy ! Clean residual min=-0.003763 max=0.004629 Jy/beam ! Clean residual mean=-0.000009 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 1.05978 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 1.05978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069955Jy sigma=0.000765 ! Fit after self-cal, rms=0.069954Jy sigma=0.000765 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123002 Jy ! Component: 100 - total flux cleaned = -9.56915e-05 Jy ! Component: 150 - total flux cleaned = -7.00616e-05 Jy ! Component: 200 - total flux cleaned = -4.55789e-05 Jy ! Total flux subtracted in 200 components = -4.55789e-05 Jy ! Clean residual min=-0.003707 max=0.004587 Jy/beam ! Clean residual mean=-0.000008 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 1.05973 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 1.05973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069948Jy sigma=0.000765 ! Fit after self-cal, rms=0.069947Jy sigma=0.000765 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=9.139 mas, bpa=17.93 degrees ! Estimated noise=1325.41 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 9.139 at 17.93 degrees (North through East) ! Clean map min=-0.0033682 max=0.95988 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069947Jy sigma=0.000765 ! Fit after self-cal, rms=0.065390Jy sigma=0.000711 ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=9.138 mas, bpa=17.92 degrees ! Estimated noise=1325.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212336 Jy ! Component: 100 - total flux cleaned = -0.000156769 Jy ! Component: 150 - total flux cleaned = -0.000130007 Jy ! Component: 200 - total flux cleaned = -0.000104837 Jy ! Total flux subtracted in 200 components = -0.000104837 Jy ! Clean residual min=-0.003347 max=0.003651 Jy/beam ! Clean residual mean=-0.000005 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 1.05963 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 1.05963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065367Jy sigma=0.000711 ! Fit after self-cal, rms=0.065367Jy sigma=0.000711 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.32128e-05 Jy ! Component: 100 - total flux cleaned = -7.02869e-07 Jy ! Component: 150 - total flux cleaned = -1.52164e-07 Jy ! Component: 200 - total flux cleaned = 2.06044e-05 Jy ! Total flux subtracted in 200 components = 2.06044e-05 Jy ! Clean residual min=-0.003351 max=0.003653 Jy/beam ! Clean residual mean=-0.000005 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 1.05965 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 142 components and 1.05965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065353Jy sigma=0.000711 ! Fit after self-cal, rms=0.065352Jy sigma=0.000711 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065352Jy sigma=0.000711 ! Fit after self-cal, rms=0.065355Jy sigma=0.000711 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.113 mas, bpa=19.49 degrees ! Estimated noise=1766.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.739945 Jy ! Component: 100 - total flux cleaned = 0.903916 Jy ! Component: 150 - total flux cleaned = 0.960761 Jy ! Component: 200 - total flux cleaned = 0.990818 Jy ! Total flux subtracted in 200 components = 0.990818 Jy ! Clean residual min=-0.009655 max=0.015098 Jy/beam ! Clean residual mean=-0.000045 rms=0.003072 Jy/beam ! Combined flux in latest and established models = 0.990818 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.990818 Jy ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=9.138 mas, bpa=17.91 degrees ! Estimated noise=1325.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0250024 Jy ! Component: 100 - total flux cleaned = 0.0388691 Jy ! Component: 150 - total flux cleaned = 0.047908 Jy ! Component: 200 - total flux cleaned = 0.0545936 Jy ! Total flux subtracted in 200 components = 0.0545936 Jy ! Clean residual min=-0.005479 max=0.004951 Jy/beam ! Clean residual mean=-0.000013 rms=0.001388 Jy/beam ! Combined flux in latest and established models = 1.04541 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 53 components and 1.04541 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.025 mas, bmaj=14.41 mas, bpa=2.77 degrees ! Estimated noise=1572.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00621744 Jy ! Component: 100 - total flux cleaned = 0.00886317 Jy ! Component: 150 - total flux cleaned = 0.0104269 Jy ! Component: 200 - total flux cleaned = 0.0112397 Jy ! Total flux subtracted in 200 components = 0.0112397 Jy ! Clean residual min=-0.004882 max=0.004241 Jy/beam ! Clean residual mean=-0.000012 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 1.05665 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000749777 Jy ! Component: 100 - total flux cleaned = 0.00116491 Jy ! Component: 150 - total flux cleaned = 0.00139384 Jy ! Component: 200 - total flux cleaned = 0.00153998 Jy ! Total flux subtracted in 200 components = 0.00153998 Jy ! Clean residual min=-0.004016 max=0.004481 Jy/beam ! Clean residual mean=-0.000009 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 1.05819 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 113 components and 1.05819 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=9.138 mas, bpa=17.91 degrees ! Estimated noise=1325.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00054465 Jy ! Component: 100 - total flux cleaned = 0.000536097 Jy ! Component: 150 - total flux cleaned = 0.00053488 Jy ! Component: 200 - total flux cleaned = 0.000590652 Jy ! Total flux subtracted in 200 components = 0.000590652 Jy ! Clean residual min=-0.003659 max=0.003622 Jy/beam ! Clean residual mean=-0.000005 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 1.05878 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 1.05878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065561Jy sigma=0.000712 ! Fit after self-cal, rms=0.065552Jy sigma=0.000712 wmodel J1327+2210_S_2014_06_09_pus_map.mod ! Writing 132 model components to file: J1327+2210_S_2014_06_09_pus_map.mod wobs J1327+2210_S_2014_06_09_pus_uvs.fits ! Writing UV FITS file: J1327+2210_S_2014_06_09_pus_uvs.fits wwins J1327+2210_S_2014_06_09_pus_map.win ! wwins: Wrote 2 windows to J1327+2210_S_2014_06_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188262 Jy ! Component: 100 - total flux cleaned = 0.000311691 Jy ! Component: 150 - total flux cleaned = 0.000313673 Jy ! Component: 200 - total flux cleaned = 0.000569514 Jy ! Component: 250 - total flux cleaned = 0.000567453 Jy ! Component: 300 - total flux cleaned = 0.000708896 Jy ! Component: 350 - total flux cleaned = 0.000888314 Jy ! Component: 400 - total flux cleaned = 0.00114599 Jy ! Component: 450 - total flux cleaned = 0.00151802 Jy ! Component: 500 - total flux cleaned = 0.00163799 Jy ! Component: 550 - total flux cleaned = 0.00186879 Jy ! Component: 600 - total flux cleaned = 0.00205454 Jy ! Component: 650 - total flux cleaned = 0.00219861 Jy ! Component: 700 - total flux cleaned = 0.00237334 Jy ! Component: 750 - total flux cleaned = 0.00247498 Jy ! Component: 800 - total flux cleaned = 0.00264139 Jy ! Component: 850 - total flux cleaned = 0.00280304 Jy ! Component: 900 - total flux cleaned = 0.00289793 Jy ! Component: 950 - total flux cleaned = 0.00302137 Jy ! Component: 1000 - total flux cleaned = 0.0030214 Jy ! Component: 1050 - total flux cleaned = 0.00317002 Jy ! Component: 1100 - total flux cleaned = 0.00328638 Jy ! Component: 1150 - total flux cleaned = 0.00337141 Jy ! Component: 1200 - total flux cleaned = 0.00342738 Jy ! Component: 1250 - total flux cleaned = 0.0035376 Jy ! Component: 1300 - total flux cleaned = 0.00359146 Jy ! Component: 1350 - total flux cleaned = 0.0036439 Jy ! Component: 1400 - total flux cleaned = 0.00374736 Jy ! Component: 1450 - total flux cleaned = 0.00382384 Jy ! Component: 1500 - total flux cleaned = 0.00392455 Jy ! Component: 1550 - total flux cleaned = 0.00399869 Jy ! Component: 1600 - total flux cleaned = 0.00404764 Jy ! Component: 1650 - total flux cleaned = 0.00414422 Jy ! Component: 1700 - total flux cleaned = 0.00421575 Jy ! Component: 1750 - total flux cleaned = 0.00423929 Jy ! Component: 1800 - total flux cleaned = 0.00430904 Jy ! Component: 1850 - total flux cleaned = 0.0043547 Jy ! Component: 1900 - total flux cleaned = 0.00442244 Jy ! Component: 1950 - total flux cleaned = 0.00444476 Jy ! Component: 2000 - total flux cleaned = 0.00444482 Jy ! Component: 2050 - total flux cleaned = 0.00453249 Jy ! Component: 2100 - total flux cleaned = 0.0046192 Jy ! Component: 2150 - total flux cleaned = 0.00474767 Jy ! Component: 2200 - total flux cleaned = 0.00479003 Jy ! Component: 2250 - total flux cleaned = 0.00485311 Jy ! Component: 2300 - total flux cleaned = 0.00501895 Jy ! Component: 2350 - total flux cleaned = 0.00506002 Jy ! Component: 2400 - total flux cleaned = 0.00520231 Jy ! Component: 2450 - total flux cleaned = 0.00524257 Jy ! Component: 2500 - total flux cleaned = 0.00534229 Jy ! Component: 2550 - total flux cleaned = 0.00542148 Jy ! Component: 2600 - total flux cleaned = 0.00546096 Jy ! Component: 2650 - total flux cleaned = 0.00557773 Jy ! Component: 2700 - total flux cleaned = 0.00561627 Jy ! Component: 2750 - total flux cleaned = 0.00567386 Jy ! Component: 2800 - total flux cleaned = 0.00571203 Jy ! Component: 2850 - total flux cleaned = 0.00573095 Jy ! Component: 2900 - total flux cleaned = 0.00580588 Jy ! Component: 2950 - total flux cleaned = 0.00586169 Jy ! Component: 3000 - total flux cleaned = 0.00595406 Jy ! Component: 3050 - total flux cleaned = 0.00595408 Jy ! Component: 3100 - total flux cleaned = 0.00604543 Jy ! Component: 3150 - total flux cleaned = 0.00609992 Jy ! Component: 3200 - total flux cleaned = 0.00615406 Jy ! Component: 3250 - total flux cleaned = 0.00624392 Jy ! Component: 3300 - total flux cleaned = 0.0063154 Jy ! Component: 3350 - total flux cleaned = 0.006351 Jy ! Component: 3400 - total flux cleaned = 0.00643973 Jy ! Component: 3450 - total flux cleaned = 0.00647501 Jy ! Component: 3500 - total flux cleaned = 0.0065453 Jy ! Component: 3550 - total flux cleaned = 0.00659782 Jy ! Component: 3600 - total flux cleaned = 0.0066153 Jy ! Component: 3650 - total flux cleaned = 0.00670211 Jy ! Component: 3700 - total flux cleaned = 0.00677129 Jy ! Component: 3750 - total flux cleaned = 0.00680563 Jy ! Component: 3800 - total flux cleaned = 0.00689133 Jy ! Component: 3850 - total flux cleaned = 0.00694265 Jy ! Component: 3900 - total flux cleaned = 0.00697672 Jy ! Component: 3950 - total flux cleaned = 0.00702761 Jy ! Component: 4000 - total flux cleaned = 0.00704456 Jy ! Component: 4050 - total flux cleaned = 0.00717934 Jy ! Total flux subtracted in 4096 components = 0.00719615 Jy ! Clean residual min=-0.000922 max=0.001015 Jy/beam ! Clean residual mean=-0.000002 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 1.06598 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 371 components and 1.06598 Jy ![Exited script file: muppet] wmap "J1327+2210_S_2014_06_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 9.138 at 17.91 degrees (North through East) ! Clean map min=-0.0026237 max=0.96167 Jy/beam ! Writing clean map to FITS file: J1327+2210_S_2014_06_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.961666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000269309 device "J1327+2210_S_2014_06_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1327+2210_S_2014_06_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0840132 0.0840132 0.168026 0.336053 0.672106 1.34421 2.68842 5.37685 10.7537 21.5074 43.0148 86.0295 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.961 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.786 x 9.138 at 17.91 degrees (North through East) ! Clean map min=-0.0026237 max=0.96167 Jy/beam quit ! Quitting program ! Log file J1327+2210_S_2014_06_09_pus_uvs.log closed on Wed Nov 16 19:54:48 2016