! Started logfile: J1327+2210_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:28 2017 obs J1327+2210_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1327+2210_S_2014_01_04_pus_uva.fits ! AN table 1: 59 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.539077 visibilities/baseline/integration-bin. ! Found source: J1327+2210 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 4580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1327+2210_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.395308Jy sigma=0.004981 ! Fit after self-cal, rms=0.371672Jy sigma=0.004581 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=4.647 mas, bpa=6.747 degrees ! Estimated noise=1131.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.993568 Jy ! Component: 100 - total flux cleaned = 1.21023 Jy ! Total flux subtracted in 100 components = 1.21023 Jy ! Clean residual min=-0.046209 max=0.060428 Jy/beam ! Clean residual mean=-0.000199 rms=0.012059 Jy/beam ! Combined flux in latest and established models = 1.21023 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.21023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219659Jy sigma=0.002685 ! Fit after self-cal, rms=0.219659Jy sigma=0.002685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.728 mas, bmaj=6.085 mas, bpa=3.421 degrees ! Estimated noise=773.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0792678 Jy ! Component: 100 - total flux cleaned = 0.125888 Jy ! Component: 150 - total flux cleaned = 0.155875 Jy ! Component: 200 - total flux cleaned = 0.175162 Jy ! Total flux subtracted in 200 components = 0.175162 Jy ! Clean residual min=-0.033644 max=0.040288 Jy/beam ! Clean residual mean=-0.000073 rms=0.008926 Jy/beam ! Combined flux in latest and established models = 1.38539 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.38539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175067Jy sigma=0.002347 ! Fit after self-cal, rms=0.175030Jy sigma=0.002347 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.83 KP 1.00* LA 1.02 ! MK 0.96 NL 0.98 OV 0.97 PT 1.00 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 KP 1.00* LA 1.00 ! MK 0.98 NL 1.05 OV 1.00 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.15 KP 1.00* LA 0.82 ! MK 1.00 NL 1.01 OV 0.93 PT 0.96 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.01 KP 1.00* LA 0.88 ! MK 1.00 NL 1.10 OV 1.00 PT 1.01 ! SC 0.97 ! ! ! Fit before self-cal, rms=0.175030Jy sigma=0.002347 ! Fit after self-cal, rms=0.100201Jy sigma=0.001340 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.697 mas, bmaj=6.149 mas, bpa=3.824 degrees ! Estimated noise=772.641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00800198 Jy ! Component: 100 - total flux cleaned = -0.00879363 Jy ! Component: 150 - total flux cleaned = -0.00972395 Jy ! Component: 200 - total flux cleaned = -0.0107754 Jy ! Total flux subtracted in 200 components = -0.0107754 Jy ! Clean residual min=-0.012047 max=0.011258 Jy/beam ! Clean residual mean=0.000089 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 1.37462 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 1.37462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098844Jy sigma=0.001322 ! Fit after self-cal, rms=0.098670Jy sigma=0.001322 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098670Jy sigma=0.001322 ! Fit after self-cal, rms=0.097542Jy sigma=0.001298 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.704 mas, bmaj=6.136 mas, bpa=3.503 degrees ! Estimated noise=772.041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00662758 Jy ! Component: 100 - total flux cleaned = -0.00744239 Jy ! Component: 150 - total flux cleaned = -0.00836435 Jy ! Component: 200 - total flux cleaned = -0.00921305 Jy ! Total flux subtracted in 200 components = -0.00921305 Jy ! Clean residual min=-0.009469 max=0.010354 Jy/beam ! Clean residual mean=0.000064 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 1.3654 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 1.3654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096509Jy sigma=0.001288 ! Fit after self-cal, rms=0.096499Jy sigma=0.001288 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-28.5, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645349 Jy ! Component: 100 - total flux cleaned = 0.00684468 Jy ! Component: 150 - total flux cleaned = 0.00717933 Jy ! Component: 200 - total flux cleaned = 0.00702999 Jy ! Total flux subtracted in 200 components = 0.00702999 Jy ! Clean residual min=-0.009541 max=0.007408 Jy/beam ! Clean residual mean=0.000053 rms=0.001817 Jy/beam ! Combined flux in latest and established models = 1.37243 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 42 components and 1.37243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095348Jy sigma=0.001276 ! Fit after self-cal, rms=0.095302Jy sigma=0.001276 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095302Jy sigma=0.001276 ! Fit after self-cal, rms=0.095124Jy sigma=0.001274 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.705 mas, bmaj=6.13 mas, bpa=3.449 degrees ! Estimated noise=771.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00270072 Jy ! Component: 100 - total flux cleaned = -0.00329642 Jy ! Component: 150 - total flux cleaned = -0.00384876 Jy ! Component: 200 - total flux cleaned = -0.00423176 Jy ! Total flux subtracted in 200 components = -0.00423176 Jy ! Clean residual min=-0.008197 max=0.006409 Jy/beam ! Clean residual mean=0.000043 rms=0.001578 Jy/beam ! Combined flux in latest and established models = 1.3682 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 48 components and 1.3682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094572Jy sigma=0.001269 ! Fit after self-cal, rms=0.094561Jy sigma=0.001269 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00057813 Jy ! Component: 100 - total flux cleaned = -0.000697486 Jy ! Component: 150 - total flux cleaned = -0.000919401 Jy ! Component: 200 - total flux cleaned = -0.00113013 Jy ! Total flux subtracted in 200 components = -0.00113013 Jy ! Clean residual min=-0.007484 max=0.006099 Jy/beam ! Clean residual mean=0.000042 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 1.36707 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 1.36707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094247Jy sigma=0.001266 ! Fit after self-cal, rms=0.094240Jy sigma=0.001266 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094240Jy sigma=0.001266 ! Fit after self-cal, rms=0.094122Jy sigma=0.001266 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.988 mas, bmaj=9.548 mas, bpa=8.804 degrees ! Estimated noise=873.049 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327685 Jy ! Component: 100 - total flux cleaned = -0.00397794 Jy ! Component: 150 - total flux cleaned = -0.00411126 Jy ! Component: 200 - total flux cleaned = -0.00417421 Jy ! Total flux subtracted in 200 components = -0.00417421 Jy ! Clean residual min=-0.006910 max=0.005172 Jy/beam ! Clean residual mean=0.000060 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 1.3629 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 58 components and 1.3629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093985Jy sigma=0.001264 ! Fit after self-cal, rms=0.093958Jy sigma=0.001263 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031558 Jy ! Component: 100 - total flux cleaned = -0.000427082 Jy ! Component: 150 - total flux cleaned = -0.000429866 Jy ! Component: 200 - total flux cleaned = -0.000430179 Jy ! Total flux subtracted in 200 components = -0.000430179 Jy ! Clean residual min=-0.006522 max=0.005135 Jy/beam ! Clean residual mean=0.000058 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 1.36247 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 1.36247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093917Jy sigma=0.001263 ! Fit after self-cal, rms=0.093899Jy sigma=0.001263 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.706 mas, bmaj=6.128 mas, bpa=3.424 degrees ! Estimated noise=770.695 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.706 x 6.128 at 3.424 degrees (North through East) ! Clean map min=-0.0059241 max=1.2666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093899Jy sigma=0.001263 ! Fit after self-cal, rms=0.063064Jy sigma=0.000779 ! Inverting map and beam ! Estimated beam: bmin=4.707 mas, bmaj=6.129 mas, bpa=3.54 degrees ! Estimated noise=770.402 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00199663 Jy ! Component: 100 - total flux cleaned = -0.002676 Jy ! Component: 150 - total flux cleaned = -0.00303092 Jy ! Component: 200 - total flux cleaned = -0.00328255 Jy ! Total flux subtracted in 200 components = -0.00328255 Jy ! Clean residual min=-0.005689 max=0.004892 Jy/beam ! Clean residual mean=0.000032 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 1.35918 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 1.35918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062714Jy sigma=0.000776 ! Fit after self-cal, rms=0.062711Jy sigma=0.000776 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406974 Jy ! Component: 100 - total flux cleaned = -0.000640553 Jy ! Component: 150 - total flux cleaned = -0.000713689 Jy ! Component: 200 - total flux cleaned = -0.000855412 Jy ! Total flux subtracted in 200 components = -0.000855412 Jy ! Clean residual min=-0.005441 max=0.004845 Jy/beam ! Clean residual mean=0.000032 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 1.35833 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 1.35833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062482Jy sigma=0.000774 ! Fit after self-cal, rms=0.062480Jy sigma=0.000774 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062480Jy sigma=0.000774 ! Fit after self-cal, rms=0.062397Jy sigma=0.000773 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.52 mas, bmaj=4.66 mas, bpa=7.053 degrees ! Estimated noise=1138.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.999347 Jy ! Component: 100 - total flux cleaned = 1.21727 Jy ! Component: 150 - total flux cleaned = 1.27053 Jy ! Component: 200 - total flux cleaned = 1.29296 Jy ! Total flux subtracted in 200 components = 1.29296 Jy ! Clean residual min=-0.011339 max=0.014371 Jy/beam ! Clean residual mean=-0.000036 rms=0.002542 Jy/beam ! Combined flux in latest and established models = 1.29296 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 1.29296 Jy ! Inverting map and beam ! Estimated beam: bmin=4.706 mas, bmaj=6.128 mas, bpa=3.541 degrees ! Estimated noise=770.121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195972 Jy ! Component: 100 - total flux cleaned = 0.0314934 Jy ! Component: 150 - total flux cleaned = 0.0402114 Jy ! Component: 200 - total flux cleaned = 0.0465213 Jy ! Total flux subtracted in 200 components = 0.0465213 Jy ! Clean residual min=-0.006175 max=0.005974 Jy/beam ! Clean residual mean=0.000003 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 1.33948 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 1.33948 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.997 mas, bmaj=9.557 mas, bpa=9.064 degrees ! Estimated noise=871.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632433 Jy ! Component: 100 - total flux cleaned = 0.00852284 Jy ! Component: 150 - total flux cleaned = 0.00979096 Jy ! Component: 200 - total flux cleaned = 0.0105916 Jy ! Total flux subtracted in 200 components = 0.0105916 Jy ! Clean residual min=-0.005061 max=0.004547 Jy/beam ! Clean residual mean=0.000032 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 1.35007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000462979 Jy ! Component: 100 - total flux cleaned = 0.000769787 Jy ! Component: 150 - total flux cleaned = 0.00103361 Jy ! Component: 200 - total flux cleaned = 0.00120132 Jy ! Total flux subtracted in 200 components = 0.00120132 Jy ! Clean residual min=-0.004403 max=0.004055 Jy/beam ! Clean residual mean=0.000037 rms=0.001263 Jy/beam ! Combined flux in latest and established models = 1.35127 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 1.35127 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.706 mas, bmaj=6.128 mas, bpa=3.541 degrees ! Estimated noise=770.121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245599 Jy ! Component: 100 - total flux cleaned = -0.0002479 Jy ! Component: 150 - total flux cleaned = -6.85096e-05 Jy ! Component: 200 - total flux cleaned = 1.60705e-05 Jy ! Total flux subtracted in 200 components = 1.60705e-05 Jy ! Clean residual min=-0.004159 max=0.004224 Jy/beam ! Clean residual mean=0.000020 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 1.35129 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 1.35129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061730Jy sigma=0.000769 ! Fit after self-cal, rms=0.061612Jy sigma=0.000767 wmodel J1327+2210_S_2014_01_04_pus_map.mod ! Writing 122 model components to file: J1327+2210_S_2014_01_04_pus_map.mod wobs J1327+2210_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1327+2210_S_2014_01_04_pus_uvs.fits wwins J1327+2210_S_2014_01_04_pus_map.win ! wwins: Wrote 3 windows to J1327+2210_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151937 Jy ! Component: 100 - total flux cleaned = 0.00203996 Jy ! Component: 150 - total flux cleaned = 0.00234103 Jy ! Component: 200 - total flux cleaned = 0.00245644 Jy ! Component: 250 - total flux cleaned = 0.00223839 Jy ! Component: 300 - total flux cleaned = 0.00208266 Jy ! Component: 350 - total flux cleaned = 0.00218119 Jy ! Component: 400 - total flux cleaned = 0.00232619 Jy ! Component: 450 - total flux cleaned = 0.0024656 Jy ! Component: 500 - total flux cleaned = 0.00277897 Jy ! Component: 550 - total flux cleaned = 0.00299463 Jy ! Component: 600 - total flux cleaned = 0.00320368 Jy ! Component: 650 - total flux cleaned = 0.00340604 Jy ! Component: 700 - total flux cleaned = 0.00364296 Jy ! Component: 750 - total flux cleaned = 0.00375805 Jy ! Component: 800 - total flux cleaned = 0.00390616 Jy ! Component: 850 - total flux cleaned = 0.00397845 Jy ! Component: 900 - total flux cleaned = 0.00411861 Jy ! Component: 950 - total flux cleaned = 0.00422139 Jy ! Component: 1000 - total flux cleaned = 0.00438754 Jy ! Component: 1050 - total flux cleaned = 0.00442006 Jy ! Component: 1100 - total flux cleaned = 0.00451478 Jy ! Component: 1150 - total flux cleaned = 0.00457706 Jy ! Component: 1200 - total flux cleaned = 0.00457756 Jy ! Component: 1250 - total flux cleaned = 0.00475453 Jy ! Component: 1300 - total flux cleaned = 0.00478377 Jy ! Component: 1350 - total flux cleaned = 0.00489638 Jy ! Component: 1400 - total flux cleaned = 0.00500703 Jy ! Component: 1450 - total flux cleaned = 0.00503476 Jy ! Component: 1500 - total flux cleaned = 0.00522173 Jy ! Component: 1550 - total flux cleaned = 0.0053784 Jy ! Component: 1600 - total flux cleaned = 0.00550614 Jy ! Component: 1650 - total flux cleaned = 0.00558101 Jy ! Component: 1700 - total flux cleaned = 0.00572957 Jy ! Component: 1750 - total flux cleaned = 0.00585149 Jy ! Component: 1800 - total flux cleaned = 0.00604396 Jy ! Component: 1850 - total flux cleaned = 0.00613842 Jy ! Component: 1900 - total flux cleaned = 0.00634794 Jy ! Component: 1950 - total flux cleaned = 0.00639342 Jy ! Component: 2000 - total flux cleaned = 0.00657388 Jy ! Component: 2050 - total flux cleaned = 0.00672971 Jy ! Component: 2100 - total flux cleaned = 0.00686135 Jy ! Component: 2150 - total flux cleaned = 0.00703459 Jy ! Component: 2200 - total flux cleaned = 0.00714166 Jy ! Component: 2250 - total flux cleaned = 0.00730962 Jy ! Component: 2300 - total flux cleaned = 0.00743406 Jy ! Component: 2350 - total flux cleaned = 0.00755707 Jy ! Component: 2400 - total flux cleaned = 0.00773883 Jy ! Component: 2450 - total flux cleaned = 0.00781863 Jy ! Component: 2500 - total flux cleaned = 0.0079567 Jy ! Component: 2550 - total flux cleaned = 0.0080732 Jy ! Component: 2600 - total flux cleaned = 0.00824557 Jy ! Component: 2650 - total flux cleaned = 0.00837788 Jy ! Component: 2700 - total flux cleaned = 0.00848946 Jy ! Component: 2750 - total flux cleaned = 0.00852623 Jy ! Component: 2800 - total flux cleaned = 0.0086175 Jy ! Component: 2850 - total flux cleaned = 0.00872523 Jy ! Component: 2900 - total flux cleaned = 0.00886748 Jy ! Component: 2950 - total flux cleaned = 0.00892009 Jy ! Component: 3000 - total flux cleaned = 0.00902421 Jy ! Component: 3050 - total flux cleaned = 0.00910991 Jy ! Component: 3100 - total flux cleaned = 0.00917756 Jy ! Component: 3150 - total flux cleaned = 0.00922793 Jy ! Component: 3200 - total flux cleaned = 0.00926115 Jy ! Component: 3250 - total flux cleaned = 0.00932664 Jy ! Component: 3300 - total flux cleaned = 0.00931033 Jy ! Component: 3350 - total flux cleaned = 0.00932645 Jy ! Component: 3400 - total flux cleaned = 0.00939011 Jy ! Component: 3450 - total flux cleaned = 0.00937435 Jy ! Component: 3500 - total flux cleaned = 0.00937445 Jy ! Component: 3550 - total flux cleaned = 0.00942076 Jy ! Component: 3600 - total flux cleaned = 0.00937498 Jy ! Component: 3650 - total flux cleaned = 0.00945054 Jy ! Component: 3700 - total flux cleaned = 0.00937541 Jy ! Component: 3750 - total flux cleaned = 0.00934603 Jy ! Component: 3800 - total flux cleaned = 0.0093608 Jy ! Component: 3850 - total flux cleaned = 0.00931733 Jy ! Component: 3900 - total flux cleaned = 0.00933173 Jy ! Component: 3950 - total flux cleaned = 0.00936049 Jy ! Component: 4000 - total flux cleaned = 0.00931779 Jy ! Component: 4050 - total flux cleaned = 0.00927553 Jy ! Total flux subtracted in 4096 components = 0.00927576 Jy ! Clean residual min=-0.000732 max=0.000930 Jy/beam ! Clean residual mean=-0.000001 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 1.36056 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 349 components and 1.36056 Jy ![Exited script file: muppet] wmap "J1327+2210_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.706 x 6.128 at 3.541 degrees (North through East) ! Clean map min=-0.003381 max=1.2768 Jy/beam ! Writing clean map to FITS file: J1327+2210_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.27676 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000241276 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0566924 0.0566924 0.113385 0.22677 0.453539 0.907079 1.81416 3.62832 7.25663 14.5133 29.0265 58.0531 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.276 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.706 x 6.128 at 3.541 degrees (North through East) ! Clean map min=-0.003381 max=1.2768 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1327+2210_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:28:32 2017