! Started logfile: J1327+1223_S_2014_01_04_pus_uvs.log on Thu Jan 12 18:28:23 2017 obs J1327+1223_S_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1327+1223_S_2014_01_04_pus_uva.fits ! AN table 1: 60 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.597222 visibilities/baseline/integration-bin. ! Found source: J1327+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 370 lines of history. ! ! Reading 5160 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1327+1223_S_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.819138Jy sigma=0.011049 ! Fit after self-cal, rms=0.809966Jy sigma=0.010909 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=5.509 mas, bpa=-1.289 degrees ! Estimated noise=984.652 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148701 Jy ! Component: 100 - total flux cleaned = 0.181128 Jy ! Total flux subtracted in 100 components = 0.181128 Jy ! Clean residual min=-0.006632 max=0.009689 Jy/beam ! Clean residual mean=-0.000025 rms=0.001788 Jy/beam ! Combined flux in latest and established models = 0.181128 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.181128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076454Jy sigma=0.000923 ! Fit after self-cal, rms=0.076440Jy sigma=0.000923 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=6.22 mas, bpa=0.6426 degrees ! Estimated noise=775.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00962533 Jy ! Component: 100 - total flux cleaned = 0.015295 Jy ! Component: 150 - total flux cleaned = 0.0189671 Jy ! Component: 200 - total flux cleaned = 0.021351 Jy ! Total flux subtracted in 200 components = 0.021351 Jy ! Clean residual min=-0.004893 max=0.004947 Jy/beam ! Clean residual mean=-0.000034 rms=0.001300 Jy/beam ! Combined flux in latest and established models = 0.202479 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.202479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074801Jy sigma=0.000910 ! Fit after self-cal, rms=0.074743Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.84 KP 1.00* LA 1.01 ! MK 1.01 NL 0.99 OV 0.95 PT 1.04 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 KP 1.00* LA 1.00 ! MK 0.99 NL 1.06 OV 0.99 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.16 KP 1.00* LA 0.83 ! MK 1.00 NL 1.05 OV 0.93 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.99 KP 1.00* LA 0.90 ! MK 0.95 NL 1.10 OV 0.98 PT 1.00 ! SC 0.92 ! ! ! Fit before self-cal, rms=0.074743Jy sigma=0.000910 ! Fit after self-cal, rms=0.070917Jy sigma=0.000877 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.26 mas, bmaj=6.255 mas, bpa=1.063 degrees ! Estimated noise=775.099 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142526 Jy ! Component: 100 - total flux cleaned = -0.00160406 Jy ! Component: 150 - total flux cleaned = -0.00176338 Jy ! Component: 200 - total flux cleaned = -0.00190567 Jy ! Total flux subtracted in 200 components = -0.00190567 Jy ! Clean residual min=-0.002947 max=0.003061 Jy/beam ! Clean residual mean=-0.000009 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.200573 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.200573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070818Jy sigma=0.000876 ! Fit after self-cal, rms=0.070651Jy sigma=0.000875 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070651Jy sigma=0.000875 ! Fit after self-cal, rms=0.070888Jy sigma=0.000873 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.274 mas, bmaj=6.227 mas, bpa=0.7197 degrees ! Estimated noise=775.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570783 Jy ! Component: 100 - total flux cleaned = -0.000681539 Jy ! Component: 150 - total flux cleaned = -0.000812956 Jy ! Component: 200 - total flux cleaned = -0.000932329 Jy ! Total flux subtracted in 200 components = -0.000932329 Jy ! Clean residual min=-0.002747 max=0.002300 Jy/beam ! Clean residual mean=-0.000012 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.199641 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.199641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070846Jy sigma=0.000872 ! Fit after self-cal, rms=0.070837Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167669 Jy ! Component: 100 - total flux cleaned = -0.00027207 Jy ! Component: 150 - total flux cleaned = -0.000371206 Jy ! Component: 200 - total flux cleaned = -0.00046457 Jy ! Total flux subtracted in 200 components = -0.00046457 Jy ! Clean residual min=-0.002581 max=0.002298 Jy/beam ! Clean residual mean=-0.000013 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.199177 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 26 components and 0.199177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070817Jy sigma=0.000872 ! Fit after self-cal, rms=0.070818Jy sigma=0.000872 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070818Jy sigma=0.000872 ! Fit after self-cal, rms=0.070805Jy sigma=0.000872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.268 mas, bmaj=6.221 mas, bpa=0.668 degrees ! Estimated noise=776.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.11501e-05 Jy ! Component: 100 - total flux cleaned = -0.000165702 Jy ! Component: 150 - total flux cleaned = -0.000267039 Jy ! Component: 200 - total flux cleaned = -0.000384453 Jy ! Total flux subtracted in 200 components = -0.000384453 Jy ! Clean residual min=-0.002451 max=0.002211 Jy/beam ! Clean residual mean=-0.000012 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.198792 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 26 components and 0.198792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070780Jy sigma=0.000872 ! Fit after self-cal, rms=0.070768Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131879 Jy ! Component: 100 - total flux cleaned = -0.000213664 Jy ! Component: 150 - total flux cleaned = -0.000311665 Jy ! Component: 200 - total flux cleaned = -0.000386416 Jy ! Total flux subtracted in 200 components = -0.000386416 Jy ! Clean residual min=-0.002343 max=0.002185 Jy/beam ! Clean residual mean=-0.000013 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.198406 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.198406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070754Jy sigma=0.000872 ! Fit after self-cal, rms=0.070757Jy sigma=0.000872 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070757Jy sigma=0.000872 ! Fit after self-cal, rms=0.070780Jy sigma=0.000872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.709 mas, bmaj=10.09 mas, bpa=-5.317 degrees ! Estimated noise=907.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262382 Jy ! Component: 100 - total flux cleaned = 0.000194478 Jy ! Component: 150 - total flux cleaned = 0.000138937 Jy ! Component: 200 - total flux cleaned = 0.000103385 Jy ! Total flux subtracted in 200 components = 0.000103385 Jy ! Clean residual min=-0.002704 max=0.002279 Jy/beam ! Clean residual mean=-0.000023 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.198509 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 34 components and 0.198509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070786Jy sigma=0.000872 ! Fit after self-cal, rms=0.070770Jy sigma=0.000872 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180341 Jy ! Component: 100 - total flux cleaned = 0.000133474 Jy ! Component: 150 - total flux cleaned = 8.53964e-05 Jy ! Component: 200 - total flux cleaned = 5.36959e-05 Jy ! Total flux subtracted in 200 components = 5.36959e-05 Jy ! Clean residual min=-0.002695 max=0.002281 Jy/beam ! Clean residual mean=-0.000022 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.198563 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 35 components and 0.198563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070776Jy sigma=0.000872 ! Fit after self-cal, rms=0.070775Jy sigma=0.000872 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=6.218 mas, bpa=0.6463 degrees ! Estimated noise=776.722 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.263 x 6.218 at 0.6463 degrees (North through East) ! Clean map min=-0.0022728 max=0.1877 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=5.492 mas, bpa=-0.8338 degrees ! Estimated noise=984.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14873 Jy ! Component: 100 - total flux cleaned = 0.181162 Jy ! Component: 150 - total flux cleaned = 0.188849 Jy ! Component: 200 - total flux cleaned = 0.19246 Jy ! Total flux subtracted in 200 components = 0.19246 Jy ! Clean residual min=-0.002612 max=0.003103 Jy/beam ! Clean residual mean=-0.000012 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.19246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.19246 Jy ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=6.218 mas, bpa=0.6463 degrees ! Estimated noise=776.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285738 Jy ! Component: 100 - total flux cleaned = 0.0039634 Jy ! Component: 150 - total flux cleaned = 0.00466453 Jy ! Component: 200 - total flux cleaned = 0.00513347 Jy ! Total flux subtracted in 200 components = 0.00513347 Jy ! Clean residual min=-0.002176 max=0.002086 Jy/beam ! Clean residual mean=-0.000015 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.197593 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 33 components and 0.197593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.709 mas, bmaj=10.09 mas, bpa=-5.317 degrees ! Estimated noise=907.541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153656 Jy ! Component: 100 - total flux cleaned = 0.000154318 Jy ! Component: 150 - total flux cleaned = 0.000154491 Jy ! Component: 200 - total flux cleaned = 0.000166643 Jy ! Total flux subtracted in 200 components = 0.000166643 Jy ! Clean residual min=-0.002656 max=0.002220 Jy/beam ! Clean residual mean=-0.000029 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.19776 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00555e-05 Jy ! Component: 100 - total flux cleaned = 1.06008e-05 Jy ! Component: 150 - total flux cleaned = 2.96538e-06 Jy ! Component: 200 - total flux cleaned = -4.54099e-06 Jy ! Total flux subtracted in 200 components = -4.54099e-06 Jy ! Clean residual min=-0.002653 max=0.002209 Jy/beam ! Clean residual mean=-0.000029 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.197755 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.197755 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=6.218 mas, bpa=0.6463 degrees ! Estimated noise=776.722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247257 Jy ! Component: 100 - total flux cleaned = 0.000296247 Jy ! Component: 150 - total flux cleaned = 0.000296088 Jy ! Component: 200 - total flux cleaned = 0.000316141 Jy ! Total flux subtracted in 200 components = 0.000316141 Jy ! Clean residual min=-0.002128 max=0.002097 Jy/beam ! Clean residual mean=-0.000014 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.198071 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.198071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070691Jy sigma=0.000871 ! Fit after self-cal, rms=0.070686Jy sigma=0.000871 wmodel J1327+1223_S_2014_01_04_pus_map.mod ! Writing 75 model components to file: J1327+1223_S_2014_01_04_pus_map.mod wobs J1327+1223_S_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1327+1223_S_2014_01_04_pus_uvs.fits wwins J1327+1223_S_2014_01_04_pus_map.win ! wwins: Wrote 2 windows to J1327+1223_S_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000162561 Jy ! Component: 100 - total flux cleaned = 5.77014e-05 Jy ! Component: 150 - total flux cleaned = -9.38363e-06 Jy ! Component: 200 - total flux cleaned = -7.073e-05 Jy ! Component: 250 - total flux cleaned = -7.04907e-05 Jy ! Component: 300 - total flux cleaned = -1.44853e-05 Jy ! Component: 350 - total flux cleaned = -1.40558e-05 Jy ! Component: 400 - total flux cleaned = 0.000118364 Jy ! Component: 450 - total flux cleaned = 0.000142861 Jy ! Component: 500 - total flux cleaned = 9.36549e-05 Jy ! Component: 550 - total flux cleaned = 9.39631e-05 Jy ! Component: 600 - total flux cleaned = 9.41736e-05 Jy ! Component: 650 - total flux cleaned = 9.41089e-05 Jy ! Component: 700 - total flux cleaned = 2.70885e-05 Jy ! Component: 750 - total flux cleaned = 5.51914e-06 Jy ! Component: 800 - total flux cleaned = -1.53959e-05 Jy ! Component: 850 - total flux cleaned = -5.64171e-05 Jy ! Component: 900 - total flux cleaned = -5.59708e-05 Jy ! Component: 950 - total flux cleaned = -5.59219e-05 Jy ! Component: 1000 - total flux cleaned = -0.000114254 Jy ! Component: 1050 - total flux cleaned = -0.00017107 Jy ! Component: 1100 - total flux cleaned = -0.000151536 Jy ! Component: 1150 - total flux cleaned = -0.000133371 Jy ! Component: 1200 - total flux cleaned = -0.000151086 Jy ! Component: 1250 - total flux cleaned = -0.000133547 Jy ! Component: 1300 - total flux cleaned = -0.000116307 Jy ! Component: 1350 - total flux cleaned = -0.000116645 Jy ! Component: 1400 - total flux cleaned = -8.31835e-05 Jy ! Component: 1450 - total flux cleaned = -3.39543e-05 Jy ! Component: 1500 - total flux cleaned = -3.39856e-05 Jy ! Component: 1550 - total flux cleaned = 1.37351e-05 Jy ! Component: 1600 - total flux cleaned = 4.49382e-05 Jy ! Component: 1650 - total flux cleaned = 7.54755e-05 Jy ! Component: 1700 - total flux cleaned = 9.0849e-05 Jy ! Component: 1750 - total flux cleaned = 0.000105829 Jy ! Component: 1800 - total flux cleaned = 0.000150089 Jy ! Component: 1850 - total flux cleaned = 0.000164453 Jy ! Component: 1900 - total flux cleaned = 0.000193117 Jy ! Component: 1950 - total flux cleaned = 0.000178818 Jy ! Component: 2000 - total flux cleaned = 0.000206691 Jy ! Component: 2050 - total flux cleaned = 0.000192943 Jy ! Component: 2100 - total flux cleaned = 0.000233831 Jy ! Component: 2150 - total flux cleaned = 0.000247258 Jy ! Component: 2200 - total flux cleaned = 0.000260576 Jy ! Component: 2250 - total flux cleaned = 0.00031309 Jy ! Component: 2300 - total flux cleaned = 0.000352189 Jy ! Component: 2350 - total flux cleaned = 0.000377959 Jy ! Component: 2400 - total flux cleaned = 0.000416461 Jy ! Component: 2450 - total flux cleaned = 0.000467131 Jy ! Component: 2500 - total flux cleaned = 0.000504853 Jy ! Component: 2550 - total flux cleaned = 0.000529698 Jy ! Component: 2600 - total flux cleaned = 0.000566658 Jy ! Component: 2650 - total flux cleaned = 0.000591094 Jy ! Component: 2700 - total flux cleaned = 0.000591175 Jy ! Component: 2750 - total flux cleaned = 0.000615265 Jy ! Component: 2800 - total flux cleaned = 0.000615228 Jy ! Component: 2850 - total flux cleaned = 0.00063897 Jy ! Component: 2900 - total flux cleaned = 0.00065074 Jy ! Component: 2950 - total flux cleaned = 0.000615788 Jy ! Component: 3000 - total flux cleaned = 0.000627399 Jy ! Component: 3050 - total flux cleaned = 0.000604429 Jy ! Component: 3100 - total flux cleaned = 0.000615827 Jy ! Component: 3150 - total flux cleaned = 0.000604507 Jy ! Component: 3200 - total flux cleaned = 0.000570786 Jy ! Component: 3250 - total flux cleaned = 0.000559662 Jy ! Component: 3300 - total flux cleaned = 0.000559745 Jy ! Component: 3350 - total flux cleaned = 0.000592926 Jy ! Component: 3400 - total flux cleaned = 0.000559993 Jy ! Component: 3450 - total flux cleaned = 0.000549072 Jy ! Component: 3500 - total flux cleaned = 0.000570741 Jy ! Component: 3550 - total flux cleaned = 0.000527509 Jy ! Component: 3600 - total flux cleaned = 0.000527582 Jy ! Component: 3650 - total flux cleaned = 0.000516906 Jy ! Component: 3700 - total flux cleaned = 0.0004958 Jy ! Component: 3750 - total flux cleaned = 0.00051687 Jy ! Component: 3800 - total flux cleaned = 0.000495869 Jy ! Component: 3850 - total flux cleaned = 0.000475033 Jy ! Component: 3900 - total flux cleaned = 0.000475004 Jy ! Component: 3950 - total flux cleaned = 0.000475042 Jy ! Component: 4000 - total flux cleaned = 0.000464853 Jy ! Component: 4050 - total flux cleaned = 0.000485295 Jy ! Total flux subtracted in 4096 components = 0.000485257 Jy ! Clean residual min=-0.000706 max=0.000551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.198557 Jy keep ! Adding 217 model components to the UV plane model. ! The established model now contains 292 components and 0.198557 Jy ![Exited script file: muppet] wmap "J1327+1223_S_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.263 x 6.218 at 0.6463 degrees (North through East) ! Clean map min=-0.0014894 max=0.18927 Jy/beam ! Writing clean map to FITS file: J1327+1223_S_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.189273 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000168041 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.266348 0.266348 0.532695 1.06539 2.13078 4.26156 8.52313 17.0463 34.0925 68.185 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.189 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.263 x 6.218 at 0.6463 degrees (North through East) ! Clean map min=-0.0014894 max=0.18927 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1327+1223_S_2014_01_04_pus_uvs.log closed on Thu Jan 12 18:28:28 2017