! Started logfile: J1326-0500_S_2014_08_09_pus_uvs.log on Tue Nov 29 23:06:14 2016 obs J1326-0500_S_2014_08_09_pus_uva.fits ! Reading UV FITS file: J1326-0500_S_2014_08_09_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.803122 visibilities/baseline/integration-bin. ! Found source: J1326-0500 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 346 lines of history. ! ! Reading 17492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1326-0500_S_2014_08_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 129 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.920186Jy sigma=0.008873 ! Fit after self-cal, rms=0.886297Jy sigma=0.008653 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.709 mas, bpa=4.66 degrees ! Estimated noise=1279.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.090915 Jy ! Component: 100 - total flux cleaned = 0.111545 Jy ! Total flux subtracted in 100 components = 0.111545 Jy ! Clean residual min=-0.005095 max=0.007102 Jy/beam ! Clean residual mean=0.000010 rms=0.001225 Jy/beam ! Combined flux in latest and established models = 0.111545 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.111545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104900Jy sigma=0.000779 ! Fit after self-cal, rms=0.104784Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=8.208 mas, bpa=1.584 degrees ! Estimated noise=607.419 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00756212 Jy ! Component: 100 - total flux cleaned = 0.0105023 Jy ! Component: 150 - total flux cleaned = 0.0121213 Jy ! Component: 200 - total flux cleaned = 0.0130245 Jy ! Total flux subtracted in 200 components = 0.0130245 Jy ! Clean residual min=-0.004164 max=0.004322 Jy/beam ! Clean residual mean=0.000005 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 0.12457 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.12457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104164Jy sigma=0.000774 ! Fit after self-cal, rms=0.104120Jy sigma=0.000774 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.84 HN 0.98 KP 1.08 ! LA 1.17 MK 1.07 NL 0.88 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.11 HN 1.01 KP 1.08 ! LA 1.12 MK 1.05 NL 0.95 OV 1.02 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.17 HN 1.01 KP 0.87 ! LA 0.82 MK 1.00 NL 1.01 OV 0.93 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 0.96 KP 0.86 ! LA 0.77 MK 0.97 NL 1.06 OV 0.96 ! PT 0.99 SC 0.98 ! ! ! Fit before self-cal, rms=0.104120Jy sigma=0.000774 ! Fit after self-cal, rms=0.099658Jy sigma=0.000759 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=8.258 mas, bpa=1.722 degrees ! Estimated noise=608.633 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.04955e-05 Jy ! Component: 100 - total flux cleaned = 3.52905e-05 Jy ! Component: 150 - total flux cleaned = 3.50698e-05 Jy ! Component: 200 - total flux cleaned = 2.22138e-05 Jy ! Total flux subtracted in 200 components = 2.22138e-05 Jy ! Clean residual min=-0.002962 max=0.003084 Jy/beam ! Clean residual mean=0.000003 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.124592 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.124592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099651Jy sigma=0.000759 ! Fit after self-cal, rms=0.099613Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099613Jy sigma=0.000758 ! Fit after self-cal, rms=0.098942Jy sigma=0.000752 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=8.267 mas, bpa=1.689 degrees ! Estimated noise=607.493 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000367416 Jy ! Component: 100 - total flux cleaned = -0.000409061 Jy ! Component: 150 - total flux cleaned = -0.000432235 Jy ! Component: 200 - total flux cleaned = -0.000453788 Jy ! Total flux subtracted in 200 components = -0.000453788 Jy ! Clean residual min=-0.001589 max=0.001601 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.124138 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.124138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098934Jy sigma=0.000752 ! Fit after self-cal, rms=0.098941Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.65524e-05 Jy ! Component: 100 - total flux cleaned = -6.5539e-05 Jy ! Component: 150 - total flux cleaned = -8.42535e-05 Jy ! Component: 200 - total flux cleaned = -0.000111456 Jy ! Total flux subtracted in 200 components = -0.000111456 Jy ! Clean residual min=-0.001559 max=0.001599 Jy/beam ! Clean residual mean=-0.000001 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.124027 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.124027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098937Jy sigma=0.000751 ! Fit after self-cal, rms=0.098936Jy sigma=0.000751 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098936Jy sigma=0.000751 ! Fit after self-cal, rms=0.099056Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.902 mas, bmaj=8.281 mas, bpa=1.702 degrees ! Estimated noise=607.173 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279506 Jy ! Component: 100 - total flux cleaned = -0.000314652 Jy ! Component: 150 - total flux cleaned = -0.000333309 Jy ! Component: 200 - total flux cleaned = -0.000342176 Jy ! Total flux subtracted in 200 components = -0.000342176 Jy ! Clean residual min=-0.001574 max=0.001583 Jy/beam ! Clean residual mean=-0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.123685 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.123685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099051Jy sigma=0.000751 ! Fit after self-cal, rms=0.099058Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23754e-06 Jy ! Component: 100 - total flux cleaned = -1.75621e-05 Jy ! Component: 150 - total flux cleaned = -3.35989e-05 Jy ! Component: 200 - total flux cleaned = -5.69988e-05 Jy ! Total flux subtracted in 200 components = -5.69988e-05 Jy ! Clean residual min=-0.001566 max=0.001584 Jy/beam ! Clean residual mean=-0.000001 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.123628 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.123628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099055Jy sigma=0.000751 ! Fit after self-cal, rms=0.099055Jy sigma=0.000751 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099055Jy sigma=0.000751 ! Fit after self-cal, rms=0.099091Jy sigma=0.000751 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.367 mas, bmaj=13.4 mas, bpa=1.357 degrees ! Estimated noise=712.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000481157 Jy ! Component: 100 - total flux cleaned = -0.000522328 Jy ! Component: 150 - total flux cleaned = -0.000577838 Jy ! Component: 200 - total flux cleaned = -0.000613398 Jy ! Total flux subtracted in 200 components = -0.000613398 Jy ! Clean residual min=-0.001506 max=0.001823 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.123014 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.123014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099086Jy sigma=0.000751 ! Fit after self-cal, rms=0.099096Jy sigma=0.000751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.85566e-05 Jy ! Component: 100 - total flux cleaned = -8.96247e-05 Jy ! Component: 150 - total flux cleaned = -0.000122801 Jy ! Component: 200 - total flux cleaned = -0.000138506 Jy ! Total flux subtracted in 200 components = -0.000138506 Jy ! Clean residual min=-0.001509 max=0.001827 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.122876 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 57 components and 0.122876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099095Jy sigma=0.000751 ! Fit after self-cal, rms=0.099098Jy sigma=0.000751 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=8.293 mas, bpa=1.706 degrees ! Estimated noise=607.002 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 8.293 at 1.706 degrees (North through East) ! Clean map min=-0.0015544 max=0.11665 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.963 mas, bmaj=6.748 mas, bpa=4.458 degrees ! Estimated noise=1278.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0907895 Jy ! Component: 100 - total flux cleaned = 0.111666 Jy ! Component: 150 - total flux cleaned = 0.11868 Jy ! Component: 200 - total flux cleaned = 0.121569 Jy ! Total flux subtracted in 200 components = 0.121569 Jy ! Clean residual min=-0.003004 max=0.003117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000721 Jy/beam ! Combined flux in latest and established models = 0.121569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.121569 Jy ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=8.293 mas, bpa=1.706 degrees ! Estimated noise=607.002 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015704 Jy ! Component: 100 - total flux cleaned = 0.00186508 Jy ! Component: 150 - total flux cleaned = 0.00188301 Jy ! Component: 200 - total flux cleaned = 0.00188261 Jy ! Total flux subtracted in 200 components = 0.00188261 Jy ! Clean residual min=-0.001528 max=0.001621 Jy/beam ! Clean residual mean=-0.000001 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.123452 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.123452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.367 mas, bmaj=13.4 mas, bpa=1.357 degrees ! Estimated noise=712.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223858 Jy ! Component: 100 - total flux cleaned = -0.000294313 Jy ! Component: 150 - total flux cleaned = -0.000351977 Jy ! Component: 200 - total flux cleaned = -0.000400423 Jy ! Total flux subtracted in 200 components = -0.000400423 Jy ! Clean residual min=-0.001577 max=0.001814 Jy/beam ! Clean residual mean=-0.000002 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.123051 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.06115e-05 Jy ! Component: 100 - total flux cleaned = -5.77808e-05 Jy ! Component: 150 - total flux cleaned = -8.14287e-05 Jy ! Component: 200 - total flux cleaned = -9.55829e-05 Jy ! Total flux subtracted in 200 components = -9.55829e-05 Jy ! Clean residual min=-0.001566 max=0.001810 Jy/beam ! Clean residual mean=-0.000002 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.122956 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.122956 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=8.293 mas, bpa=1.706 degrees ! Estimated noise=607.002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213528 Jy ! Component: 100 - total flux cleaned = 0.0002903 Jy ! Component: 150 - total flux cleaned = 0.000336921 Jy ! Component: 200 - total flux cleaned = 0.000362759 Jy ! Total flux subtracted in 200 components = 0.000362759 Jy ! Clean residual min=-0.001536 max=0.001575 Jy/beam ! Clean residual mean=-0.000001 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.123318 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.123318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099102Jy sigma=0.000751 ! Fit after self-cal, rms=0.099095Jy sigma=0.000751 wmodel J1326-0500_S_2014_08_09_pus_map.mod ! Writing 47 model components to file: J1326-0500_S_2014_08_09_pus_map.mod wobs J1326-0500_S_2014_08_09_pus_uvs.fits ! Writing UV FITS file: J1326-0500_S_2014_08_09_pus_uvs.fits wwins J1326-0500_S_2014_08_09_pus_map.win ! wwins: Wrote 1 windows to J1326-0500_S_2014_08_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330496 Jy ! Component: 100 - total flux cleaned = 0.000384266 Jy ! Component: 150 - total flux cleaned = 0.00033419 Jy ! Component: 200 - total flux cleaned = 0.000358788 Jy ! Component: 250 - total flux cleaned = 0.000287636 Jy ! Component: 300 - total flux cleaned = 0.000219182 Jy ! Component: 350 - total flux cleaned = 0.000241183 Jy ! Component: 400 - total flux cleaned = 0.000262712 Jy ! Component: 450 - total flux cleaned = 0.000262336 Jy ! Component: 500 - total flux cleaned = 0.000200593 Jy ! Component: 550 - total flux cleaned = 0.000160866 Jy ! Component: 600 - total flux cleaned = 0.000101803 Jy ! Component: 650 - total flux cleaned = 0.000101802 Jy ! Component: 700 - total flux cleaned = 0.00019643 Jy ! Component: 750 - total flux cleaned = 0.000196382 Jy ! Component: 800 - total flux cleaned = 0.000214676 Jy ! Component: 850 - total flux cleaned = 0.00023243 Jy ! Component: 900 - total flux cleaned = 0.000285698 Jy ! Component: 950 - total flux cleaned = 0.000285548 Jy ! Component: 1000 - total flux cleaned = 0.000285641 Jy ! Component: 1050 - total flux cleaned = 0.00033616 Jy ! Component: 1100 - total flux cleaned = 0.000335723 Jy ! Component: 1150 - total flux cleaned = 0.00033578 Jy ! Component: 1200 - total flux cleaned = 0.00033596 Jy ! Component: 1250 - total flux cleaned = 0.00031986 Jy ! Component: 1300 - total flux cleaned = 0.000351132 Jy ! Component: 1350 - total flux cleaned = 0.000288581 Jy ! Component: 1400 - total flux cleaned = 0.000273429 Jy ! Component: 1450 - total flux cleaned = 0.000273567 Jy ! Component: 1500 - total flux cleaned = 0.000288448 Jy ! Component: 1550 - total flux cleaned = 0.000273401 Jy ! Component: 1600 - total flux cleaned = 0.000170884 Jy ! Component: 1650 - total flux cleaned = 0.0001712 Jy ! Component: 1700 - total flux cleaned = 0.000171171 Jy ! Component: 1750 - total flux cleaned = 0.000171041 Jy ! Component: 1800 - total flux cleaned = 0.0001569 Jy ! Component: 1850 - total flux cleaned = 0.000142741 Jy ! Component: 1900 - total flux cleaned = 8.78484e-05 Jy ! Component: 1950 - total flux cleaned = 6.08918e-05 Jy ! Component: 2000 - total flux cleaned = 7.43588e-05 Jy ! Component: 2050 - total flux cleaned = 6.11231e-05 Jy ! Component: 2100 - total flux cleaned = 4.79539e-05 Jy ! Component: 2150 - total flux cleaned = 4.78993e-05 Jy ! Component: 2200 - total flux cleaned = 4.78667e-05 Jy ! Component: 2250 - total flux cleaned = 4.77267e-05 Jy ! Component: 2300 - total flux cleaned = 4.77851e-05 Jy ! Component: 2350 - total flux cleaned = 1.01237e-05 Jy ! Component: 2400 - total flux cleaned = -2.70657e-05 Jy ! Component: 2450 - total flux cleaned = -2.69315e-05 Jy ! Component: 2500 - total flux cleaned = -1.486e-05 Jy ! Component: 2550 - total flux cleaned = -6.35741e-05 Jy ! Component: 2600 - total flux cleaned = -9.98974e-05 Jy ! Component: 2650 - total flux cleaned = -0.000159771 Jy ! Component: 2700 - total flux cleaned = -0.00019555 Jy ! Component: 2750 - total flux cleaned = -0.000207324 Jy ! Component: 2800 - total flux cleaned = -0.000301038 Jy ! Component: 2850 - total flux cleaned = -0.000301073 Jy ! Component: 2900 - total flux cleaned = -0.000358823 Jy ! Component: 2950 - total flux cleaned = -0.000381634 Jy ! Component: 3000 - total flux cleaned = -0.0004272 Jy ! Component: 3050 - total flux cleaned = -0.000483853 Jy ! Component: 3100 - total flux cleaned = -0.000495116 Jy ! Component: 3150 - total flux cleaned = -0.0005175 Jy ! Component: 3200 - total flux cleaned = -0.000584184 Jy ! Component: 3250 - total flux cleaned = -0.000606204 Jy ! Component: 3300 - total flux cleaned = -0.000639095 Jy ! Component: 3350 - total flux cleaned = -0.000693617 Jy ! Component: 3400 - total flux cleaned = -0.000726207 Jy ! Component: 3450 - total flux cleaned = -0.000747726 Jy ! Component: 3500 - total flux cleaned = -0.000822685 Jy ! Component: 3550 - total flux cleaned = -0.000854587 Jy ! Component: 3600 - total flux cleaned = -0.000896941 Jy ! Component: 3650 - total flux cleaned = -0.000949635 Jy ! Component: 3700 - total flux cleaned = -0.00101254 Jy ! Component: 3750 - total flux cleaned = -0.00101249 Jy ! Component: 3800 - total flux cleaned = -0.00110575 Jy ! Component: 3850 - total flux cleaned = -0.00113655 Jy ! Component: 3900 - total flux cleaned = -0.00112636 Jy ! Component: 3950 - total flux cleaned = -0.0011978 Jy ! Component: 4000 - total flux cleaned = -0.0012586 Jy ! Component: 4050 - total flux cleaned = -0.00125851 Jy ! Total flux subtracted in 4096 components = -0.00127856 Jy ! Clean residual min=-0.000619 max=0.000640 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.12204 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 345 components and 0.12204 Jy ![Exited script file: muppet] wmap "J1326-0500_S_2014_08_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 8.293 at 1.706 degrees (North through East) ! Clean map min=-0.0011354 max=0.11648 Jy/beam ! Writing clean map to FITS file: J1326-0500_S_2014_08_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116484 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000183987 device "J1326-0500_S_2014_08_09_pus\_map.eps/VPS" ! Attempting to open device: 'J1326-0500_S_2014_08_09_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.473851 0.473851 0.947703 1.89541 3.79081 7.58162 15.1632 30.3265 60.653 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.906 x 8.293 at 1.706 degrees (North through East) ! Clean map min=-0.0011354 max=0.11648 Jy/beam quit ! Quitting program ! Log file J1326-0500_S_2014_08_09_pus_uvs.log closed on Tue Nov 29 23:06:18 2016