! Started logfile: J1325-1117_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:54:10 2017 obs J1325-1117_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1325-1117_S_2015_01_22_pus_uva.fits ! AN table 1: 49 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1325-1117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 4116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1325-1117_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 166 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 147 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929982Jy sigma=0.008614 ! Fit after self-cal, rms=0.902580Jy sigma=0.008446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.553 mas, bmaj=7.253 mas, bpa=0.3525 degrees ! Estimated noise=1796.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0769289 Jy ! Component: 100 - total flux cleaned = 0.0987884 Jy ! Total flux subtracted in 100 components = 0.0987884 Jy ! Clean residual min=-0.007603 max=0.012782 Jy/beam ! Clean residual mean=0.000071 rms=0.002598 Jy/beam ! Combined flux in latest and established models = 0.0987884 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0987884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106412Jy sigma=0.000790 ! Fit after self-cal, rms=0.106448Jy sigma=0.000790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.162 mas, bmaj=8.932 mas, bpa=-3.687 degrees ! Estimated noise=1299.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135613 Jy ! Component: 100 - total flux cleaned = 0.0197882 Jy ! Component: 150 - total flux cleaned = 0.0228151 Jy ! Component: 200 - total flux cleaned = 0.024354 Jy ! Total flux subtracted in 200 components = 0.024354 Jy ! Clean residual min=-0.005443 max=0.008459 Jy/beam ! Clean residual mean=0.000055 rms=0.002115 Jy/beam ! Combined flux in latest and established models = 0.123142 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 41 components and 0.123142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105040Jy sigma=0.000771 ! Fit after self-cal, rms=0.104788Jy sigma=0.000770 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.25 KP 1.06 ! LA 1.00 MK 1.04 NL 1.00* OV 1.01 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.57 KP 0.98 ! LA 0.95 MK 1.00 NL 1.00* OV 1.02 ! PT 1.05 SC 1.20 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.17 KP 0.88 ! LA 0.79 MK 1.03 NL 1.00* OV 0.93 ! PT 1.05 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.23 KP 0.80 ! LA 0.82 MK 0.96 NL 1.00* OV 1.03 ! PT 1.05 SC 0.87 ! ! ! Fit before self-cal, rms=0.104788Jy sigma=0.000770 ! Fit after self-cal, rms=0.111158Jy sigma=0.000755 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.187 mas, bmaj=8.905 mas, bpa=-3.402 degrees ! Estimated noise=1293.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000313124 Jy ! Component: 100 - total flux cleaned = -0.000365706 Jy ! Component: 150 - total flux cleaned = -0.000415703 Jy ! Component: 200 - total flux cleaned = -0.000464738 Jy ! Total flux subtracted in 200 components = -0.000464738 Jy ! Clean residual min=-0.003367 max=0.003930 Jy/beam ! Clean residual mean=0.000011 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.122678 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.122678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111124Jy sigma=0.000755 ! Fit after self-cal, rms=0.111475Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111475Jy sigma=0.000754 ! Fit after self-cal, rms=0.112402Jy sigma=0.000754 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.917 mas, bpa=-3.428 degrees ! Estimated noise=1292.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237631 Jy ! Component: 100 - total flux cleaned = -0.000304706 Jy ! Component: 150 - total flux cleaned = -0.000347516 Jy ! Component: 200 - total flux cleaned = -0.000368947 Jy ! Total flux subtracted in 200 components = -0.000368947 Jy ! Clean residual min=-0.003385 max=0.003891 Jy/beam ! Clean residual mean=0.000010 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.122309 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 46 components and 0.122309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112377Jy sigma=0.000754 ! Fit after self-cal, rms=0.112380Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.07341e-05 Jy ! Component: 100 - total flux cleaned = -8.45904e-05 Jy ! Component: 150 - total flux cleaned = -0.000124563 Jy ! Component: 200 - total flux cleaned = -0.000163502 Jy ! Total flux subtracted in 200 components = -0.000163502 Jy ! Clean residual min=-0.003410 max=0.003904 Jy/beam ! Clean residual mean=0.000011 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.122145 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.122145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112359Jy sigma=0.000754 ! Fit after self-cal, rms=0.112343Jy sigma=0.000754 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112343Jy sigma=0.000754 ! Fit after self-cal, rms=0.112439Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.929 mas, bpa=-3.467 degrees ! Estimated noise=1291.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205566 Jy ! Component: 100 - total flux cleaned = -0.000311813 Jy ! Component: 150 - total flux cleaned = -0.00035113 Jy ! Component: 200 - total flux cleaned = -0.000370568 Jy ! Total flux subtracted in 200 components = -0.000370568 Jy ! Clean residual min=-0.003418 max=0.003895 Jy/beam ! Clean residual mean=0.000010 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.121775 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.121775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112417Jy sigma=0.000754 ! Fit after self-cal, rms=0.112401Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.01173e-07 Jy ! Component: 100 - total flux cleaned = -8.18839e-05 Jy ! Component: 150 - total flux cleaned = -0.000120487 Jy ! Component: 200 - total flux cleaned = -0.000157874 Jy ! Total flux subtracted in 200 components = -0.000157874 Jy ! Clean residual min=-0.003427 max=0.003904 Jy/beam ! Clean residual mean=0.000011 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.121617 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.121617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112381Jy sigma=0.000754 ! Fit after self-cal, rms=0.112365Jy sigma=0.000754 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112365Jy sigma=0.000754 ! Fit after self-cal, rms=0.112397Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.322 mas, bmaj=19.51 mas, bpa=3.065 degrees ! Estimated noise=1608.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000291992 Jy ! Component: 100 - total flux cleaned = -0.000292003 Jy ! Component: 150 - total flux cleaned = -0.000293209 Jy ! Component: 200 - total flux cleaned = -0.000292981 Jy ! Total flux subtracted in 200 components = -0.000292981 Jy ! Clean residual min=-0.003634 max=0.003285 Jy/beam ! Clean residual mean=0.000020 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.121324 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 53 components and 0.121324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112387Jy sigma=0.000754 ! Fit after self-cal, rms=0.112385Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.46658e-06 Jy ! Component: 100 - total flux cleaned = 3.62862e-06 Jy ! Component: 150 - total flux cleaned = 2.81993e-06 Jy ! Component: 200 - total flux cleaned = 3.9685e-06 Jy ! Total flux subtracted in 200 components = 3.9685e-06 Jy ! Clean residual min=-0.003628 max=0.003279 Jy/beam ! Clean residual mean=0.000020 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.121328 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 53 components and 0.121328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112379Jy sigma=0.000754 ! Fit after self-cal, rms=0.112381Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.94 mas, bpa=-3.499 degrees ! Estimated noise=1290.06 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.94 at -3.499 degrees (North through East) ! Clean map min=-0.0032977 max=0.10632 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=7.219 mas, bpa=0.7456 degrees ! Estimated noise=1799.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0766708 Jy ! Component: 100 - total flux cleaned = 0.0996877 Jy ! Component: 150 - total flux cleaned = 0.109353 Jy ! Component: 200 - total flux cleaned = 0.114855 Jy ! Total flux subtracted in 200 components = 0.114855 Jy ! Clean residual min=-0.004892 max=0.004646 Jy/beam ! Clean residual mean=0.000017 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.114855 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.114855 Jy ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.94 mas, bpa=-3.499 degrees ! Estimated noise=1290.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421619 Jy ! Component: 100 - total flux cleaned = 0.00609368 Jy ! Component: 150 - total flux cleaned = 0.00648178 Jy ! Component: 200 - total flux cleaned = 0.00661427 Jy ! Total flux subtracted in 200 components = 0.00661427 Jy ! Clean residual min=-0.003549 max=0.004018 Jy/beam ! Clean residual mean=0.000010 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.121469 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 38 components and 0.121469 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.322 mas, bmaj=19.51 mas, bpa=3.065 degrees ! Estimated noise=1608.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014058 Jy ! Component: 100 - total flux cleaned = 0.000144719 Jy ! Component: 150 - total flux cleaned = 0.000147702 Jy ! Component: 200 - total flux cleaned = 0.000149736 Jy ! Total flux subtracted in 200 components = 0.000149736 Jy ! Clean residual min=-0.003576 max=0.003338 Jy/beam ! Clean residual mean=0.000019 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.121619 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.6149e-07 Jy ! Component: 100 - total flux cleaned = -1.83026e-06 Jy ! Component: 150 - total flux cleaned = -2.2637e-06 Jy ! Component: 200 - total flux cleaned = 7.47796e-06 Jy ! Total flux subtracted in 200 components = 7.47796e-06 Jy ! Clean residual min=-0.003571 max=0.003241 Jy/beam ! Clean residual mean=0.000019 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.121626 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.121626 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.94 mas, bpa=-3.499 degrees ! Estimated noise=1290.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000147955 Jy ! Component: 100 - total flux cleaned = -0.000119294 Jy ! Component: 150 - total flux cleaned = -0.000120237 Jy ! Component: 200 - total flux cleaned = -0.000119353 Jy ! Total flux subtracted in 200 components = -0.000119353 Jy ! Clean residual min=-0.003501 max=0.003850 Jy/beam ! Clean residual mean=0.000010 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.121507 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 0.121507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112414Jy sigma=0.000754 ! Fit after self-cal, rms=0.112465Jy sigma=0.000754 wmodel J1325-1117_S_2015_01_22_pus_map.mod ! Writing 59 model components to file: J1325-1117_S_2015_01_22_pus_map.mod wobs J1325-1117_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1325-1117_S_2015_01_22_pus_uvs.fits wwins J1325-1117_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1325-1117_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000650129 Jy ! Component: 100 - total flux cleaned = 0.000701449 Jy ! Component: 150 - total flux cleaned = 0.000862835 Jy ! Component: 200 - total flux cleaned = 0.001169 Jy ! Component: 250 - total flux cleaned = 0.00116828 Jy ! Component: 300 - total flux cleaned = 0.00112214 Jy ! Component: 350 - total flux cleaned = 0.00107823 Jy ! Component: 400 - total flux cleaned = 0.00116155 Jy ! Component: 450 - total flux cleaned = 0.00116047 Jy ! Component: 500 - total flux cleaned = 0.00112163 Jy ! Component: 550 - total flux cleaned = 0.00104771 Jy ! Component: 600 - total flux cleaned = 0.000939697 Jy ! Component: 650 - total flux cleaned = 0.000800766 Jy ! Component: 700 - total flux cleaned = 0.000630464 Jy ! Component: 750 - total flux cleaned = 0.000397413 Jy ! Component: 800 - total flux cleaned = 0.000235221 Jy ! Component: 850 - total flux cleaned = 7.58178e-05 Jy ! Component: 900 - total flux cleaned = -4.88925e-05 Jy ! Component: 950 - total flux cleaned = -0.000230949 Jy ! Component: 1000 - total flux cleaned = -0.000349309 Jy ! Component: 1050 - total flux cleaned = -0.000494493 Jy ! Component: 1100 - total flux cleaned = -0.000608243 Jy ! Component: 1150 - total flux cleaned = -0.000552404 Jy ! Component: 1200 - total flux cleaned = -0.000497814 Jy ! Component: 1250 - total flux cleaned = -0.000443897 Jy ! Component: 1300 - total flux cleaned = -0.000443845 Jy ! Component: 1350 - total flux cleaned = -0.000390558 Jy ! Component: 1400 - total flux cleaned = -0.000259343 Jy ! Component: 1450 - total flux cleaned = -0.000207634 Jy ! Component: 1500 - total flux cleaned = -0.000156082 Jy ! Component: 1550 - total flux cleaned = -5.4326e-05 Jy ! Component: 1600 - total flux cleaned = -4.0364e-06 Jy ! Component: 1650 - total flux cleaned = 2.09481e-05 Jy ! Component: 1700 - total flux cleaned = 0.000120174 Jy ! Component: 1750 - total flux cleaned = 0.000193849 Jy ! Component: 1800 - total flux cleaned = 0.000193728 Jy ! Component: 1850 - total flux cleaned = 0.000242417 Jy ! Component: 1900 - total flux cleaned = 0.000266446 Jy ! Component: 1950 - total flux cleaned = 0.000315033 Jy ! Component: 2000 - total flux cleaned = 0.000315075 Jy ! Component: 2050 - total flux cleaned = 0.000387623 Jy ! Component: 2100 - total flux cleaned = 0.00046005 Jy ! Component: 2150 - total flux cleaned = 0.000556658 Jy ! Component: 2200 - total flux cleaned = 0.00067711 Jy ! Component: 2250 - total flux cleaned = 0.000798108 Jy ! Component: 2300 - total flux cleaned = 0.000870666 Jy ! Component: 2350 - total flux cleaned = 0.000992522 Jy ! Component: 2400 - total flux cleaned = 0.00104143 Jy ! Component: 2450 - total flux cleaned = 0.00113927 Jy ! Component: 2500 - total flux cleaned = 0.00118895 Jy ! Component: 2550 - total flux cleaned = 0.00118896 Jy ! Component: 2600 - total flux cleaned = 0.00121441 Jy ! Component: 2650 - total flux cleaned = 0.00121467 Jy ! Component: 2700 - total flux cleaned = 0.00118883 Jy ! Component: 2750 - total flux cleaned = 0.00116217 Jy ! Component: 2800 - total flux cleaned = 0.00116248 Jy ! Component: 2850 - total flux cleaned = 0.00116258 Jy ! Component: 2900 - total flux cleaned = 0.0011622 Jy ! Component: 2950 - total flux cleaned = 0.00116245 Jy ! Component: 3000 - total flux cleaned = 0.00119121 Jy ! Component: 3050 - total flux cleaned = 0.00116185 Jy ! Component: 3100 - total flux cleaned = 0.00116166 Jy ! Component: 3150 - total flux cleaned = 0.00113146 Jy ! Component: 3200 - total flux cleaned = 0.00116274 Jy ! Component: 3250 - total flux cleaned = 0.00116274 Jy ! Component: 3300 - total flux cleaned = 0.00116254 Jy ! Component: 3350 - total flux cleaned = 0.00116286 Jy ! Component: 3400 - total flux cleaned = 0.00112769 Jy ! Component: 3450 - total flux cleaned = 0.00116374 Jy ! Component: 3500 - total flux cleaned = 0.00116458 Jy ! Component: 3550 - total flux cleaned = 0.00112677 Jy ! Component: 3600 - total flux cleaned = 0.00116618 Jy ! Component: 3650 - total flux cleaned = 0.00116645 Jy ! Component: 3700 - total flux cleaned = 0.00112558 Jy ! Component: 3750 - total flux cleaned = 0.00112587 Jy ! Component: 3800 - total flux cleaned = 0.00112674 Jy ! Component: 3850 - total flux cleaned = 0.00107985 Jy ! Component: 3900 - total flux cleaned = 0.00107861 Jy ! Component: 3950 - total flux cleaned = 0.00102952 Jy ! Component: 4000 - total flux cleaned = 0.00103034 Jy ! Component: 4050 - total flux cleaned = 0.00103025 Jy ! Total flux subtracted in 4096 components = 0.000976602 Jy ! Clean residual min=-0.003387 max=0.003161 Jy/beam ! Clean residual mean=0.000016 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.122484 Jy keep ! Adding 208 model components to the UV plane model. ! The established model now contains 267 components and 0.122484 Jy ![Exited script file: muppet] wmap "J1325-1117_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.94 at -3.499 degrees (North through East) ! Clean map min=-0.0043502 max=0.10511 Jy/beam ! Writing clean map to FITS file: J1325-1117_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10511 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000868344 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.47839 2.47839 4.95677 9.91355 19.8271 39.6542 79.3084 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.105 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.94 at -3.499 degrees (North through East) ! Clean map min=-0.0043502 max=0.10511 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1325-1117_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:16 2017