! Started logfile: J1324+3622_S_2014_08_05_pus_uvs.log on Sun Nov 13 17:28:39 2016 obs J1324+3622_S_2014_08_05_pus_uva.fits ! Reading UV FITS file: J1324+3622_S_2014_08_05_pus_uva.fits ! AN table 1: 121 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6955 visibilities/baseline/integration-bin. ! Found source: J1324+3622 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 360 lines of history. ! ! Reading 15148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1324+3622_S_2014_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 196 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959471Jy sigma=0.011013 ! Fit after self-cal, rms=0.940878Jy sigma=0.010844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=7.589 mas, bpa=23.97 degrees ! Estimated noise=932.066 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463486 Jy ! Component: 100 - total flux cleaned = 0.0569012 Jy ! Total flux subtracted in 100 components = 0.0569012 Jy ! Clean residual min=-0.003631 max=0.003930 Jy/beam ! Clean residual mean=0.000007 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0569012 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0569012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075361Jy sigma=0.000769 ! Fit after self-cal, rms=0.075301Jy sigma=0.000768 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.578 mas, bmaj=8.275 mas, bpa=23.23 degrees ! Estimated noise=510.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539502 Jy ! Component: 100 - total flux cleaned = 0.00812456 Jy ! Component: 150 - total flux cleaned = 0.00969835 Jy ! Component: 200 - total flux cleaned = 0.0106823 Jy ! Total flux subtracted in 200 components = 0.0106823 Jy ! Clean residual min=-0.001675 max=0.001646 Jy/beam ! Clean residual mean=0.000005 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.0675835 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 44 components and 0.0675835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074842Jy sigma=0.000765 ! Fit after self-cal, rms=0.074844Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.87 HN 0.96 KP 1.07 ! LA 1.15 MK 1.00* NL 0.98 OV 0.96 ! PT 0.95 SC 0.97 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.02 HN 1.01 KP 1.01 ! LA 1.09 MK 1.00* NL 1.04 OV 1.03 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.12 HN 1.02 KP 0.95 ! LA 0.83 MK 1.00* NL 1.01 OV 0.94 ! PT 1.01 SC 1.09 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.95 HN 0.97 KP 0.89 ! LA 0.83 MK 1.00* NL 1.16 OV 0.97 ! PT 1.03 SC 0.98 ! ! ! Fit before self-cal, rms=0.074844Jy sigma=0.000764 ! Fit after self-cal, rms=0.072621Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.589 mas, bmaj=8.279 mas, bpa=22.92 degrees ! Estimated noise=509.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417301 Jy ! Component: 100 - total flux cleaned = 0.000428226 Jy ! Component: 150 - total flux cleaned = 0.000437879 Jy ! Component: 200 - total flux cleaned = 0.0004464 Jy ! Total flux subtracted in 200 components = 0.0004464 Jy ! Clean residual min=-0.001462 max=0.001370 Jy/beam ! Clean residual mean=0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0680299 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.0680299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072616Jy sigma=0.000761 ! Fit after self-cal, rms=0.072597Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072597Jy sigma=0.000761 ! Fit after self-cal, rms=0.071522Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=8.281 mas, bpa=23.18 degrees ! Estimated noise=509.275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150168 Jy ! Component: 100 - total flux cleaned = -0.000103034 Jy ! Component: 150 - total flux cleaned = -9.42456e-05 Jy ! Component: 200 - total flux cleaned = -0.000110329 Jy ! Total flux subtracted in 200 components = -0.000110329 Jy ! Clean residual min=-0.001251 max=0.001313 Jy/beam ! Clean residual mean=0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0679196 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 53 components and 0.0679196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071519Jy sigma=0.000760 ! Fit after self-cal, rms=0.071515Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.77339e-05 Jy ! Component: 100 - total flux cleaned = -1.97928e-05 Jy ! Component: 150 - total flux cleaned = -2.69948e-05 Jy ! Component: 200 - total flux cleaned = -4.01444e-05 Jy ! Total flux subtracted in 200 components = -4.01444e-05 Jy ! Clean residual min=-0.001284 max=0.001313 Jy/beam ! Clean residual mean=0.000002 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0678795 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0678795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071514Jy sigma=0.000760 ! Fit after self-cal, rms=0.071514Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071514Jy sigma=0.000760 ! Fit after self-cal, rms=0.071425Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=8.285 mas, bpa=23.33 degrees ! Estimated noise=509.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.35339e-05 Jy ! Component: 100 - total flux cleaned = -7.2396e-05 Jy ! Component: 150 - total flux cleaned = -7.2513e-05 Jy ! Component: 200 - total flux cleaned = -7.23304e-05 Jy ! Total flux subtracted in 200 components = -7.23304e-05 Jy ! Clean residual min=-0.001258 max=0.001310 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0678071 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.0678071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071423Jy sigma=0.000760 ! Fit after self-cal, rms=0.071423Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.69358e-06 Jy ! Component: 100 - total flux cleaned = -4.65531e-06 Jy ! Component: 150 - total flux cleaned = -4.72861e-06 Jy ! Component: 200 - total flux cleaned = -1.04429e-05 Jy ! Total flux subtracted in 200 components = -1.04429e-05 Jy ! Clean residual min=-0.001262 max=0.001311 Jy/beam ! Clean residual mean=0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0677967 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 61 components and 0.0677967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071422Jy sigma=0.000760 ! Fit after self-cal, rms=0.071423Jy sigma=0.000760 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071423Jy sigma=0.000760 ! Fit after self-cal, rms=0.071397Jy sigma=0.000760 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.806 mas, bmaj=10.52 mas, bpa=42.83 degrees ! Estimated noise=584.018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.50316e-05 Jy ! Component: 100 - total flux cleaned = 1.51569e-05 Jy ! Component: 150 - total flux cleaned = -4.70941e-06 Jy ! Component: 200 - total flux cleaned = -9.13863e-06 Jy ! Total flux subtracted in 200 components = -9.13863e-06 Jy ! Clean residual min=-0.001491 max=0.001440 Jy/beam ! Clean residual mean=0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0677875 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 66 components and 0.0677875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071398Jy sigma=0.000760 ! Fit after self-cal, rms=0.071397Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10339e-05 Jy ! Component: 100 - total flux cleaned = 1.33062e-05 Jy ! Component: 150 - total flux cleaned = 9.4729e-06 Jy ! Component: 200 - total flux cleaned = 5.77942e-06 Jy ! Total flux subtracted in 200 components = 5.77942e-06 Jy ! Clean residual min=-0.001487 max=0.001432 Jy/beam ! Clean residual mean=0.000004 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.0677933 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.0677933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071397Jy sigma=0.000760 ! Fit after self-cal, rms=0.071397Jy sigma=0.000760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=8.29 mas, bpa=23.45 degrees ! Estimated noise=509.543 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 8.29 at 23.45 degrees (North through East) ! Clean map min=-0.0012665 max=0.06067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=7.584 mas, bpa=24.03 degrees ! Estimated noise=935.547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464499 Jy ! Component: 100 - total flux cleaned = 0.0573604 Jy ! Component: 150 - total flux cleaned = 0.0619121 Jy ! Component: 200 - total flux cleaned = 0.0643543 Jy ! Total flux subtracted in 200 components = 0.0643543 Jy ! Clean residual min=-0.002819 max=0.002482 Jy/beam ! Clean residual mean=0.000004 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.0643543 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0643543 Jy ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=8.29 mas, bpa=23.45 degrees ! Estimated noise=509.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169341 Jy ! Component: 100 - total flux cleaned = 0.00261572 Jy ! Component: 150 - total flux cleaned = 0.00281264 Jy ! Component: 200 - total flux cleaned = 0.00293192 Jy ! Total flux subtracted in 200 components = 0.00293192 Jy ! Clean residual min=-0.001382 max=0.001288 Jy/beam ! Clean residual mean=0.000003 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0672862 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 44 components and 0.0672862 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.806 mas, bmaj=10.52 mas, bpa=42.83 degrees ! Estimated noise=584.018 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333726 Jy ! Component: 100 - total flux cleaned = 0.00037415 Jy ! Component: 150 - total flux cleaned = 0.000387964 Jy ! Component: 200 - total flux cleaned = 0.000400085 Jy ! Total flux subtracted in 200 components = 0.000400085 Jy ! Clean residual min=-0.001471 max=0.001451 Jy/beam ! Clean residual mean=0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0676863 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.44137e-06 Jy ! Component: 100 - total flux cleaned = 1.56892e-05 Jy ! Component: 150 - total flux cleaned = 2.04217e-05 Jy ! Component: 200 - total flux cleaned = 2.03727e-05 Jy ! Total flux subtracted in 200 components = 2.03727e-05 Jy ! Clean residual min=-0.001464 max=0.001447 Jy/beam ! Clean residual mean=0.000004 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0677067 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.0677067 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.592 mas, bmaj=8.29 mas, bpa=23.45 degrees ! Estimated noise=509.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124918 Jy ! Component: 100 - total flux cleaned = -0.000125073 Jy ! Component: 150 - total flux cleaned = -0.000114027 Jy ! Component: 200 - total flux cleaned = -0.000114143 Jy ! Total flux subtracted in 200 components = -0.000114143 Jy ! Clean residual min=-0.001326 max=0.001284 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0675925 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.0675925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071404Jy sigma=0.000760 ! Fit after self-cal, rms=0.071401Jy sigma=0.000760 wmodel J1324+3622_S_2014_08_05_pus_map.mod ! Writing 67 model components to file: J1324+3622_S_2014_08_05_pus_map.mod wobs J1324+3622_S_2014_08_05_pus_uvs.fits ! Writing UV FITS file: J1324+3622_S_2014_08_05_pus_uvs.fits wwins J1324+3622_S_2014_08_05_pus_map.win ! wwins: Wrote 1 windows to J1324+3622_S_2014_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123139 Jy ! Component: 100 - total flux cleaned = -0.000234383 Jy ! Component: 150 - total flux cleaned = -0.000340365 Jy ! Component: 200 - total flux cleaned = -0.000340058 Jy ! Component: 250 - total flux cleaned = -0.000300739 Jy ! Component: 300 - total flux cleaned = -0.000300288 Jy ! Component: 350 - total flux cleaned = -0.000245369 Jy ! Component: 400 - total flux cleaned = -0.000227829 Jy ! Component: 450 - total flux cleaned = -0.000262435 Jy ! Component: 500 - total flux cleaned = -0.000279358 Jy ! Component: 550 - total flux cleaned = -0.000263093 Jy ! Component: 600 - total flux cleaned = -0.000295143 Jy ! Component: 650 - total flux cleaned = -0.000263929 Jy ! Component: 700 - total flux cleaned = -0.000217931 Jy ! Component: 750 - total flux cleaned = -0.000187966 Jy ! Component: 800 - total flux cleaned = -0.000143539 Jy ! Component: 850 - total flux cleaned = -8.53784e-05 Jy ! Component: 900 - total flux cleaned = -2.8093e-05 Jy ! Component: 950 - total flux cleaned = 4.25176e-05 Jy ! Component: 1000 - total flux cleaned = 0.000111717 Jy ! Component: 1050 - total flux cleaned = 0.000152592 Jy ! Component: 1100 - total flux cleaned = 0.000206456 Jy ! Component: 1150 - total flux cleaned = 0.000259451 Jy ! Component: 1200 - total flux cleaned = 0.000337487 Jy ! Component: 1250 - total flux cleaned = 0.00042703 Jy ! Component: 1300 - total flux cleaned = 0.000502706 Jy ! Component: 1350 - total flux cleaned = 0.000540099 Jy ! Component: 1400 - total flux cleaned = 0.000663341 Jy ! Component: 1450 - total flux cleaned = 0.000687759 Jy ! Component: 1500 - total flux cleaned = 0.000795807 Jy ! Component: 1550 - total flux cleaned = 0.000914571 Jy ! Component: 1600 - total flux cleaned = 0.00103185 Jy ! Component: 1650 - total flux cleaned = 0.00112445 Jy ! Component: 1700 - total flux cleaned = 0.00125063 Jy ! Component: 1750 - total flux cleaned = 0.00131868 Jy ! Component: 1800 - total flux cleaned = 0.00147607 Jy ! Component: 1850 - total flux cleaned = 0.00154283 Jy ! Component: 1900 - total flux cleaned = 0.00161994 Jy ! Component: 1950 - total flux cleaned = 0.00171828 Jy ! Component: 2000 - total flux cleaned = 0.00179408 Jy ! Component: 2050 - total flux cleaned = 0.0018907 Jy ! Component: 2100 - total flux cleaned = 0.00200767 Jy ! Component: 2150 - total flux cleaned = 0.00208138 Jy ! Component: 2200 - total flux cleaned = 0.00219619 Jy ! Component: 2250 - total flux cleaned = 0.00226852 Jy ! Component: 2300 - total flux cleaned = 0.00231982 Jy ! Component: 2350 - total flux cleaned = 0.00238089 Jy ! Component: 2400 - total flux cleaned = 0.00244136 Jy ! Component: 2450 - total flux cleaned = 0.00251126 Jy ! Component: 2500 - total flux cleaned = 0.00263014 Jy ! Component: 2550 - total flux cleaned = 0.00268902 Jy ! Component: 2600 - total flux cleaned = 0.00272792 Jy ! Component: 2650 - total flux cleaned = 0.00280509 Jy ! Component: 2700 - total flux cleaned = 0.00286264 Jy ! Component: 2750 - total flux cleaned = 0.00291963 Jy ! Component: 2800 - total flux cleaned = 0.00302334 Jy ! Component: 2850 - total flux cleaned = 0.00306062 Jy ! Component: 2900 - total flux cleaned = 0.00309778 Jy ! Component: 2950 - total flux cleaned = 0.00317149 Jy ! Component: 3000 - total flux cleaned = 0.0031897 Jy ! Component: 3050 - total flux cleaned = 0.00321702 Jy ! Component: 3100 - total flux cleaned = 0.00329824 Jy ! Component: 3150 - total flux cleaned = 0.00336984 Jy ! Component: 3200 - total flux cleaned = 0.00338769 Jy ! Component: 3250 - total flux cleaned = 0.00345835 Jy ! Component: 3300 - total flux cleaned = 0.00347588 Jy ! Component: 3350 - total flux cleaned = 0.0034934 Jy ! Component: 3400 - total flux cleaned = 0.00357127 Jy ! Component: 3450 - total flux cleaned = 0.00359705 Jy ! Component: 3500 - total flux cleaned = 0.00363966 Jy ! Component: 3550 - total flux cleaned = 0.00367357 Jy ! Component: 3600 - total flux cleaned = 0.00372412 Jy ! Component: 3650 - total flux cleaned = 0.00377425 Jy ! Component: 3700 - total flux cleaned = 0.00380744 Jy ! Component: 3750 - total flux cleaned = 0.00382389 Jy ! Component: 3800 - total flux cleaned = 0.00386495 Jy ! Component: 3850 - total flux cleaned = 0.00389764 Jy ! Component: 3900 - total flux cleaned = 0.00393828 Jy ! Component: 3950 - total flux cleaned = 0.00399471 Jy ! Component: 4000 - total flux cleaned = 0.00407478 Jy ! Component: 4050 - total flux cleaned = 0.00410664 Jy ! Total flux subtracted in 4096 components = 0.00411456 Jy ! Clean residual min=-0.000459 max=0.000452 Jy/beam ! Clean residual mean=0.000001 rms=0.000149 Jy/beam ! Combined flux in latest and established models = 0.0717071 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 331 components and 0.0717071 Jy ![Exited script file: muppet] wmap "J1324+3622_S_2014_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 8.29 at 23.45 degrees (North through East) ! Clean map min=-0.001231 max=0.060571 Jy/beam ! Writing clean map to FITS file: J1324+3622_S_2014_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0605705 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146412 device "J1324+3622_S_2014_08_05_pus\_map.eps/VPS" ! Attempting to open device: 'J1324+3622_S_2014_08_05_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.725164 0.725164 1.45033 2.90066 5.80131 11.6026 23.2052 46.4105 92.821 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.592 x 8.29 at 23.45 degrees (North through East) ! Clean map min=-0.001231 max=0.060571 Jy/beam quit ! Quitting program ! Log file J1324+3622_S_2014_08_05_pus_uvs.log closed on Sun Nov 13 17:28:44 2016