! Started logfile: J1323-3849_S_2015_01_22_pus_uvs.log on Tue Jan 3 22:53:56 2017 obs J1323-3849_S_2015_01_22_pus_uva.fits ! Reading UV FITS file: J1323-3849_S_2015_01_22_pus_uva.fits ! AN table 1: 63 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.545679 visibilities/baseline/integration-bin. ! Found source: J1323-3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 281 lines of history. ! ! Reading 6188 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1323-3849_S_2015_01_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 157 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 189 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.852815Jy sigma=0.006646 ! Fit after self-cal, rms=0.824179Jy sigma=0.006451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.067 mas, bmaj=6.307 mas, bpa=-7.197 degrees ! Estimated noise=1795.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.131081 Jy ! Component: 100 - total flux cleaned = 0.161948 Jy ! Total flux subtracted in 100 components = 0.161948 Jy ! Clean residual min=-0.017844 max=0.022912 Jy/beam ! Clean residual mean=-0.000082 rms=0.004242 Jy/beam ! Combined flux in latest and established models = 0.161948 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.161948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119016Jy sigma=0.000853 ! Fit after self-cal, rms=0.118990Jy sigma=0.000853 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=7.423 mas, bpa=-6.338 degrees ! Estimated noise=1234.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275985 Jy ! Component: 100 - total flux cleaned = 0.0406074 Jy ! Component: 150 - total flux cleaned = 0.0470226 Jy ! Component: 200 - total flux cleaned = 0.0502239 Jy ! Total flux subtracted in 200 components = 0.0502239 Jy ! Clean residual min=-0.013274 max=0.017992 Jy/beam ! Clean residual mean=-0.000132 rms=0.003952 Jy/beam ! Combined flux in latest and established models = 0.212172 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.212172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113357Jy sigma=0.000801 ! Fit after self-cal, rms=0.113141Jy sigma=0.000800 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 1.01 MK 1.00 NL 1.34 OV 0.96 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.96 ! LA 1.00 MK 0.97 NL 1.36 OV 0.99 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 2.28 KP 0.83 ! LA 0.78 MK 1.00 NL 1.31 OV 0.92 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.77 ! LA 0.89 MK 1.03 NL 1.18 OV 0.96 ! PT 1.03 SC 0.99 ! ! ! Fit before self-cal, rms=0.113141Jy sigma=0.000800 ! Fit after self-cal, rms=0.126422Jy sigma=0.000756 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.61 mas, bmaj=7.4 mas, bpa=-5.974 degrees ! Estimated noise=1233.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.94067e-05 Jy ! Component: 100 - total flux cleaned = -9.26556e-05 Jy ! Component: 150 - total flux cleaned = -0.000120537 Jy ! Component: 200 - total flux cleaned = -0.000169406 Jy ! Total flux subtracted in 200 components = -0.000169406 Jy ! Clean residual min=-0.005752 max=0.007600 Jy/beam ! Clean residual mean=-0.000070 rms=0.001815 Jy/beam ! Combined flux in latest and established models = 0.212002 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 31 components and 0.212002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126409Jy sigma=0.000756 ! Fit after self-cal, rms=0.127205Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127205Jy sigma=0.000755 ! Fit after self-cal, rms=0.128675Jy sigma=0.000755 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.4 mas, bpa=-5.987 degrees ! Estimated noise=1233.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.02973e-05 Jy ! Component: 100 - total flux cleaned = -8.67835e-05 Jy ! Component: 150 - total flux cleaned = -0.000132333 Jy ! Component: 200 - total flux cleaned = -0.000170847 Jy ! Total flux subtracted in 200 components = -0.000170847 Jy ! Clean residual min=-0.005661 max=0.007569 Jy/beam ! Clean residual mean=-0.000069 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.211831 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.211831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128666Jy sigma=0.000755 ! Fit after self-cal, rms=0.128691Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69527e-05 Jy ! Component: 100 - total flux cleaned = -4.69735e-05 Jy ! Component: 150 - total flux cleaned = -8.29078e-05 Jy ! Component: 200 - total flux cleaned = -9.86522e-05 Jy ! Total flux subtracted in 200 components = -9.86522e-05 Jy ! Clean residual min=-0.005562 max=0.007562 Jy/beam ! Clean residual mean=-0.000069 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.211733 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.211733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128686Jy sigma=0.000755 ! Fit after self-cal, rms=0.128690Jy sigma=0.000755 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128690Jy sigma=0.000755 ! Fit after self-cal, rms=0.128748Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.401 mas, bpa=-6.003 degrees ! Estimated noise=1232.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.40546e-05 Jy ! Component: 100 - total flux cleaned = -0.000110544 Jy ! Component: 150 - total flux cleaned = -0.000140345 Jy ! Component: 200 - total flux cleaned = -0.000166631 Jy ! Total flux subtracted in 200 components = -0.000166631 Jy ! Clean residual min=-0.005472 max=0.007575 Jy/beam ! Clean residual mean=-0.000069 rms=0.001794 Jy/beam ! Combined flux in latest and established models = 0.211566 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.211566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128744Jy sigma=0.000755 ! Fit after self-cal, rms=0.128748Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.34109e-05 Jy ! Component: 100 - total flux cleaned = -4.38482e-05 Jy ! Component: 150 - total flux cleaned = -8.15493e-05 Jy ! Component: 200 - total flux cleaned = -0.000103019 Jy ! Total flux subtracted in 200 components = -0.000103019 Jy ! Clean residual min=-0.005408 max=0.007566 Jy/beam ! Clean residual mean=-0.000069 rms=0.001791 Jy/beam ! Combined flux in latest and established models = 0.211463 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.211463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128745Jy sigma=0.000755 ! Fit after self-cal, rms=0.128747Jy sigma=0.000755 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128747Jy sigma=0.000755 ! Fit after self-cal, rms=0.128758Jy sigma=0.000755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.984 mas, bmaj=24.89 mas, bpa=-4.629 degrees ! Estimated noise=1698.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000320086 Jy ! Component: 100 - total flux cleaned = -0.000324283 Jy ! Component: 150 - total flux cleaned = -0.000326463 Jy ! Component: 200 - total flux cleaned = -0.000327882 Jy ! Total flux subtracted in 200 components = -0.000327882 Jy ! Clean residual min=-0.008491 max=0.012879 Jy/beam ! Clean residual mean=-0.000167 rms=0.003666 Jy/beam ! Combined flux in latest and established models = 0.211135 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.211135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128763Jy sigma=0.000755 ! Fit after self-cal, rms=0.128746Jy sigma=0.000754 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.1791e-05 Jy ! Component: 100 - total flux cleaned = -6.58364e-05 Jy ! Component: 150 - total flux cleaned = -6.76973e-05 Jy ! Component: 200 - total flux cleaned = -6.89416e-05 Jy ! Total flux subtracted in 200 components = -6.89416e-05 Jy ! Clean residual min=-0.008502 max=0.012860 Jy/beam ! Clean residual mean=-0.000167 rms=0.003661 Jy/beam ! Combined flux in latest and established models = 0.211066 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.211066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128757Jy sigma=0.000755 ! Fit after self-cal, rms=0.128744Jy sigma=0.000754 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.402 mas, bpa=-6.015 degrees ! Estimated noise=1232.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.611 x 7.402 at -6.015 degrees (North through East) ! Clean map min=-0.0050677 max=0.18254 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.061 mas, bmaj=6.172 mas, bpa=-6.656 degrees ! Estimated noise=1841.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133886 Jy ! Component: 100 - total flux cleaned = 0.166609 Jy ! Component: 150 - total flux cleaned = 0.182851 Jy ! Component: 200 - total flux cleaned = 0.193189 Jy ! Total flux subtracted in 200 components = 0.193189 Jy ! Clean residual min=-0.006909 max=0.006267 Jy/beam ! Clean residual mean=-0.000039 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.193189 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.193189 Jy ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.402 mas, bpa=-6.015 degrees ! Estimated noise=1232.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102892 Jy ! Component: 100 - total flux cleaned = 0.015127 Jy ! Component: 150 - total flux cleaned = 0.0169847 Jy ! Component: 200 - total flux cleaned = 0.0172039 Jy ! Total flux subtracted in 200 components = 0.0172039 Jy ! Clean residual min=-0.005426 max=0.007318 Jy/beam ! Clean residual mean=-0.000071 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.210393 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.210393 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.984 mas, bmaj=24.89 mas, bpa=-4.629 degrees ! Estimated noise=1698.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000831341 Jy ! Component: 100 - total flux cleaned = 0.000832003 Jy ! Component: 150 - total flux cleaned = 0.000830376 Jy ! Component: 200 - total flux cleaned = 0.000828577 Jy ! Total flux subtracted in 200 components = 0.000828577 Jy ! Clean residual min=-0.008519 max=0.012916 Jy/beam ! Clean residual mean=-0.000166 rms=0.003676 Jy/beam ! Combined flux in latest and established models = 0.211221 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.6359e-06 Jy ! Component: 100 - total flux cleaned = -2.49738e-06 Jy ! Component: 150 - total flux cleaned = -2.89483e-06 Jy ! Component: 200 - total flux cleaned = -4.35703e-06 Jy ! Total flux subtracted in 200 components = -4.35703e-06 Jy ! Clean residual min=-0.008541 max=0.012853 Jy/beam ! Clean residual mean=-0.000166 rms=0.003653 Jy/beam ! Combined flux in latest and established models = 0.211217 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.211217 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.402 mas, bpa=-6.015 degrees ! Estimated noise=1232.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114517 Jy ! Component: 100 - total flux cleaned = 3.46468e-05 Jy ! Component: 150 - total flux cleaned = 2.78504e-05 Jy ! Component: 200 - total flux cleaned = 5.54582e-05 Jy ! Total flux subtracted in 200 components = 5.54582e-05 Jy ! Clean residual min=-0.005383 max=0.007340 Jy/beam ! Clean residual mean=-0.000068 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.211272 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.211272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128797Jy sigma=0.000755 ! Fit after self-cal, rms=0.128845Jy sigma=0.000754 wmodel J1323-3849_S_2015_01_22_pus_map.mod ! Writing 39 model components to file: J1323-3849_S_2015_01_22_pus_map.mod wobs J1323-3849_S_2015_01_22_pus_uvs.fits ! Writing UV FITS file: J1323-3849_S_2015_01_22_pus_uvs.fits wwins J1323-3849_S_2015_01_22_pus_map.win ! wwins: Wrote 1 windows to J1323-3849_S_2015_01_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314645 Jy ! Component: 100 - total flux cleaned = 0.00514623 Jy ! Component: 150 - total flux cleaned = 0.00591746 Jy ! Component: 200 - total flux cleaned = 0.00652376 Jy ! Component: 250 - total flux cleaned = 0.00693239 Jy ! Component: 300 - total flux cleaned = 0.00706011 Jy ! Component: 350 - total flux cleaned = 0.0068267 Jy ! Component: 400 - total flux cleaned = 0.00654948 Jy ! Component: 450 - total flux cleaned = 0.00623604 Jy ! Component: 500 - total flux cleaned = 0.00613648 Jy ! Component: 550 - total flux cleaned = 0.00608892 Jy ! Component: 600 - total flux cleaned = 0.00581424 Jy ! Component: 650 - total flux cleaned = 0.00555052 Jy ! Component: 700 - total flux cleaned = 0.00517095 Jy ! Component: 750 - total flux cleaned = 0.00492697 Jy ! Component: 800 - total flux cleaned = 0.0046524 Jy ! Component: 850 - total flux cleaned = 0.00457583 Jy ! Component: 900 - total flux cleaned = 0.00435418 Jy ! Component: 950 - total flux cleaned = 0.00428185 Jy ! Component: 1000 - total flux cleaned = 0.00414271 Jy ! Component: 1050 - total flux cleaned = 0.00414317 Jy ! Component: 1100 - total flux cleaned = 0.00424206 Jy ! Component: 1150 - total flux cleaned = 0.00437031 Jy ! Component: 1200 - total flux cleaned = 0.00443284 Jy ! Component: 1250 - total flux cleaned = 0.00452445 Jy ! Component: 1300 - total flux cleaned = 0.00455341 Jy ! Component: 1350 - total flux cleaned = 0.00461157 Jy ! Component: 1400 - total flux cleaned = 0.00458217 Jy ! Component: 1450 - total flux cleaned = 0.00461041 Jy ! Component: 1500 - total flux cleaned = 0.00466528 Jy ! Component: 1550 - total flux cleaned = 0.00471902 Jy ! Component: 1600 - total flux cleaned = 0.00479855 Jy ! Component: 1650 - total flux cleaned = 0.00479887 Jy ! Component: 1700 - total flux cleaned = 0.00477372 Jy ! Component: 1750 - total flux cleaned = 0.00472365 Jy ! Component: 1800 - total flux cleaned = 0.00479795 Jy ! Component: 1850 - total flux cleaned = 0.0047739 Jy ! Component: 1900 - total flux cleaned = 0.00484621 Jy ! Component: 1950 - total flux cleaned = 0.00482211 Jy ! Component: 2000 - total flux cleaned = 0.00477442 Jy ! Component: 2050 - total flux cleaned = 0.00479778 Jy ! Component: 2100 - total flux cleaned = 0.00475068 Jy ! Component: 2150 - total flux cleaned = 0.00479766 Jy ! Component: 2200 - total flux cleaned = 0.00479756 Jy ! Component: 2250 - total flux cleaned = 0.00479757 Jy ! Component: 2300 - total flux cleaned = 0.00472799 Jy ! Component: 2350 - total flux cleaned = 0.00468155 Jy ! Component: 2400 - total flux cleaned = 0.00461199 Jy ! Component: 2450 - total flux cleaned = 0.00461213 Jy ! Component: 2500 - total flux cleaned = 0.00456586 Jy ! Component: 2550 - total flux cleaned = 0.0044964 Jy ! Component: 2600 - total flux cleaned = 0.00440367 Jy ! Component: 2650 - total flux cleaned = 0.00433387 Jy ! Component: 2700 - total flux cleaned = 0.0042408 Jy ! Component: 2750 - total flux cleaned = 0.00424071 Jy ! Component: 2800 - total flux cleaned = 0.00414712 Jy ! Component: 2850 - total flux cleaned = 0.00400636 Jy ! Component: 2900 - total flux cleaned = 0.00395924 Jy ! Component: 2950 - total flux cleaned = 0.0039828 Jy ! Component: 3000 - total flux cleaned = 0.00395923 Jy ! Component: 3050 - total flux cleaned = 0.00391166 Jy ! Component: 3100 - total flux cleaned = 0.00388785 Jy ! Component: 3150 - total flux cleaned = 0.0038398 Jy ! Component: 3200 - total flux cleaned = 0.00381577 Jy ! Component: 3250 - total flux cleaned = 0.00379186 Jy ! Component: 3300 - total flux cleaned = 0.0036948 Jy ! Component: 3350 - total flux cleaned = 0.00367044 Jy ! Component: 3400 - total flux cleaned = 0.00357249 Jy ! Component: 3450 - total flux cleaned = 0.00357242 Jy ! Component: 3500 - total flux cleaned = 0.00349806 Jy ! Component: 3550 - total flux cleaned = 0.00344799 Jy ! Component: 3600 - total flux cleaned = 0.00337244 Jy ! Component: 3650 - total flux cleaned = 0.00329641 Jy ! Component: 3700 - total flux cleaned = 0.00332183 Jy ! Component: 3750 - total flux cleaned = 0.00321928 Jy ! Component: 3800 - total flux cleaned = 0.00314175 Jy ! Component: 3850 - total flux cleaned = 0.00308978 Jy ! Component: 3900 - total flux cleaned = 0.00308958 Jy ! Component: 3950 - total flux cleaned = 0.00298399 Jy ! Component: 4000 - total flux cleaned = 0.00298368 Jy ! Component: 4050 - total flux cleaned = 0.00290288 Jy ! Total flux subtracted in 4096 components = 0.0028756 Jy ! Clean residual min=-0.001720 max=0.001658 Jy/beam ! Clean residual mean=-0.000009 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.214148 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 277 components and 0.214148 Jy ![Exited script file: muppet] wmap "J1323-3849_S_2015_01_22_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.611 x 7.402 at -6.015 degrees (North through East) ! Clean map min=-0.0025464 max=0.18121 Jy/beam ! Writing clean map to FITS file: J1323-3849_S_2015_01_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181212 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00043932 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.727302 0.727302 1.4546 2.90921 5.81842 11.6368 23.2737 46.5473 93.0946 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.611 x 7.402 at -6.015 degrees (North through East) ! Clean map min=-0.0025464 max=0.18121 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1323-3849_S_2015_01_22_pus_uvs.log closed on Tue Jan 3 22:54:03 2017