! Started logfile: J1322-0937_X_2014_01_04_pus_uvs.log on Fri Jan 13 17:25:43 2017 obs J1322-0937_X_2014_01_04_pus_uva.fits ! Reading UV FITS file: J1322-0937_X_2014_01_04_pus_uva.fits ! AN table 1: 76 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.430556 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1322-0937 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 382 lines of history. ! ! Reading 14136 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1322-0937_X_2014_01_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 228 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.461116Jy sigma=0.005132 ! Fit after self-cal, rms=0.331845Jy sigma=0.003668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.623 mas, bmaj=1.674 mas, bpa=-0.8864 degrees ! Estimated noise=955.643 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.53168 Jy ! Component: 100 - total flux cleaned = 0.648391 Jy ! Total flux subtracted in 100 components = 0.648391 Jy ! Clean residual min=-0.026743 max=0.037174 Jy/beam ! Clean residual mean=0.000219 rms=0.007718 Jy/beam ! Combined flux in latest and established models = 0.648391 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.648391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134003Jy sigma=0.001606 ! Fit after self-cal, rms=0.134004Jy sigma=0.001606 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7623 mas, bmaj=1.913 mas, bpa=-0.5327 degrees ! Estimated noise=534.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520025 Jy ! Component: 100 - total flux cleaned = 0.0736263 Jy ! Component: 150 - total flux cleaned = 0.0847981 Jy ! Component: 200 - total flux cleaned = 0.091027 Jy ! Total flux subtracted in 200 components = 0.091027 Jy ! Clean residual min=-0.023233 max=0.023912 Jy/beam ! Clean residual mean=0.000310 rms=0.006256 Jy/beam ! Combined flux in latest and established models = 0.739418 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 22 components and 0.739418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.118124Jy sigma=0.001375 ! Fit after self-cal, rms=0.118143Jy sigma=0.001375 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 1.00* LA 0.97 ! MK 0.96 NL 1.02 OV 0.97 PT 0.96 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 1.00* LA 0.97 ! MK 0.97 NL 1.03 OV 0.97 PT 0.92 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 KP 1.00* LA 0.99 ! MK 0.99 NL 1.03 OV 0.97 PT 0.89 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 KP 1.00* LA 1.00 ! MK 0.99 NL 1.03 OV 0.95 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 KP 1.00* LA 0.98 ! MK 1.00 NL 1.05 OV 0.98 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 1.00* LA 0.99 ! MK 1.00 NL 1.05 OV 0.99 PT 0.90 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 KP 1.00* LA 1.00 ! MK 1.01 NL 1.05 OV 1.02 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 KP 1.00* LA 0.99 ! MK 1.00 NL 1.06 OV 1.01 PT 0.90 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 1.00* LA 1.00 ! MK 0.98 NL 1.06 OV 1.01 PT 0.91 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 KP 1.00* LA 1.02 ! MK 1.01 NL 1.06 OV 1.00 PT 0.91 ! SC 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 KP 1.00* LA 1.01 ! MK 1.03 NL 1.07 OV 1.00 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 KP 1.00* LA 1.00 ! MK 1.02 NL 1.06 OV 1.00 PT 0.94 ! SC 0.99 ! ! ! Fit before self-cal, rms=0.118143Jy sigma=0.001375 ! Fit after self-cal, rms=0.108389Jy sigma=0.001243 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.763 mas, bmaj=1.917 mas, bpa=-0.5044 degrees ! Estimated noise=532.197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010089 Jy ! Component: 100 - total flux cleaned = -0.00115361 Jy ! Component: 150 - total flux cleaned = -0.00119192 Jy ! Component: 200 - total flux cleaned = -0.00119095 Jy ! Total flux subtracted in 200 components = -0.00119095 Jy ! Clean residual min=-0.006113 max=0.006693 Jy/beam ! Clean residual mean=0.000030 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.738227 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 28 components and 0.738227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108330Jy sigma=0.001243 ! Fit after self-cal, rms=0.108355Jy sigma=0.001243 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108355Jy sigma=0.001243 ! Fit after self-cal, rms=0.107998Jy sigma=0.001237 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7627 mas, bmaj=1.921 mas, bpa=-0.5218 degrees ! Estimated noise=532.447 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109277 Jy ! Component: 100 - total flux cleaned = -0.0013872 Jy ! Component: 150 - total flux cleaned = -0.00143328 Jy ! Component: 200 - total flux cleaned = -0.0014727 Jy ! Total flux subtracted in 200 components = -0.0014727 Jy ! Clean residual min=-0.003807 max=0.004772 Jy/beam ! Clean residual mean=0.000038 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 0.736754 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 32 components and 0.736754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107911Jy sigma=0.001236 ! Fit after self-cal, rms=0.107907Jy sigma=0.001236 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.2, -17.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429108 Jy ! Component: 100 - total flux cleaned = 0.00455609 Jy ! Component: 150 - total flux cleaned = 0.00435684 Jy ! Component: 200 - total flux cleaned = 0.0043561 Jy ! Total flux subtracted in 200 components = 0.0043561 Jy ! Clean residual min=-0.003311 max=0.003813 Jy/beam ! Clean residual mean=0.000027 rms=0.000814 Jy/beam ! Combined flux in latest and established models = 0.74111 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.74111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107703Jy sigma=0.001235 ! Fit after self-cal, rms=0.107690Jy sigma=0.001234 ! Inverting map ! Added new window around map position (-2, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029961 Jy ! Component: 100 - total flux cleaned = 0.00358904 Jy ! Component: 150 - total flux cleaned = 0.00380746 Jy ! Component: 200 - total flux cleaned = 0.00405066 Jy ! Total flux subtracted in 200 components = 0.00405066 Jy ! Clean residual min=-0.002911 max=0.002405 Jy/beam ! Clean residual mean=0.000016 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.745161 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 59 components and 0.745161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107558Jy sigma=0.001233 ! Fit after self-cal, rms=0.107555Jy sigma=0.001233 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107555Jy sigma=0.001233 ! Fit after self-cal, rms=0.107458Jy sigma=0.001233 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7626 mas, bmaj=1.922 mas, bpa=-0.5376 degrees ! Estimated noise=531.952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512022 Jy ! Component: 100 - total flux cleaned = 0.000422221 Jy ! Component: 150 - total flux cleaned = 0.000305659 Jy ! Component: 200 - total flux cleaned = 0.00019888 Jy ! Total flux subtracted in 200 components = 0.00019888 Jy ! Clean residual min=-0.002446 max=0.002291 Jy/beam ! Clean residual mean=0.000009 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.74536 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 67 components and 0.74536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107418Jy sigma=0.001233 ! Fit after self-cal, rms=0.107418Jy sigma=0.001233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000328547 Jy ! Component: 100 - total flux cleaned = 0.0002325 Jy ! Component: 150 - total flux cleaned = 0.000172074 Jy ! Component: 200 - total flux cleaned = 0.00011498 Jy ! Total flux subtracted in 200 components = 0.00011498 Jy ! Clean residual min=-0.002343 max=0.002230 Jy/beam ! Clean residual mean=0.000009 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.745475 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.745475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107397Jy sigma=0.001233 ! Fit after self-cal, rms=0.107398Jy sigma=0.001233 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107398Jy sigma=0.001233 ! Fit after self-cal, rms=0.107371Jy sigma=0.001233 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=4.626 mas, bpa=-5.259 degrees ! Estimated noise=709.218 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000551831 Jy ! Component: 100 - total flux cleaned = 0.000605724 Jy ! Component: 150 - total flux cleaned = 0.000605113 Jy ! Component: 200 - total flux cleaned = 0.000621297 Jy ! Total flux subtracted in 200 components = 0.000621297 Jy ! Clean residual min=-0.001854 max=0.002393 Jy/beam ! Clean residual mean=0.000005 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.746096 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 77 components and 0.746096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107363Jy sigma=0.001233 ! Fit after self-cal, rms=0.107364Jy sigma=0.001233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136645 Jy ! Component: 100 - total flux cleaned = 0.000137319 Jy ! Component: 150 - total flux cleaned = 0.000152751 Jy ! Component: 200 - total flux cleaned = 0.000152922 Jy ! Total flux subtracted in 200 components = 0.000152922 Jy ! Clean residual min=-0.001848 max=0.002373 Jy/beam ! Clean residual mean=0.000006 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.746249 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 0.746249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107358Jy sigma=0.001233 ! Fit after self-cal, rms=0.107358Jy sigma=0.001233 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.7627 mas, bmaj=1.922 mas, bpa=-0.5499 degrees ! Estimated noise=531.799 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7627 x 1.922 at -0.5499 degrees (North through East) ! Clean map min=-0.0020485 max=0.68741 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107358Jy sigma=0.001233 ! Fit after self-cal, rms=0.080784Jy sigma=0.000603 ! Inverting map and beam ! Estimated beam: bmin=0.7625 mas, bmaj=1.922 mas, bpa=-0.5723 degrees ! Estimated noise=531.823 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000427082 Jy ! Component: 100 - total flux cleaned = -0.0005395 Jy ! Component: 150 - total flux cleaned = -0.000590624 Jy ! Component: 200 - total flux cleaned = -0.000637895 Jy ! Total flux subtracted in 200 components = -0.000637895 Jy ! Clean residual min=-0.001939 max=0.001973 Jy/beam ! Clean residual mean=0.000003 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.745611 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 0.745611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080765Jy sigma=0.000602 ! Fit after self-cal, rms=0.080770Jy sigma=0.000602 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.18339e-05 Jy ! Component: 100 - total flux cleaned = -1.11243e-05 Jy ! Component: 150 - total flux cleaned = -6.96272e-05 Jy ! Component: 200 - total flux cleaned = -0.000143814 Jy ! Total flux subtracted in 200 components = -0.000143814 Jy ! Clean residual min=-0.001817 max=0.001872 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.745467 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 0.745467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080760Jy sigma=0.000602 ! Fit after self-cal, rms=0.080761Jy sigma=0.000602 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080761Jy sigma=0.000602 ! Fit after self-cal, rms=0.080921Jy sigma=0.000602 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6215 mas, bmaj=1.675 mas, bpa=-0.9346 degrees ! Estimated noise=956.955 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532388 Jy ! Component: 100 - total flux cleaned = 0.64934 Jy ! Component: 150 - total flux cleaned = 0.687476 Jy ! Component: 200 - total flux cleaned = 0.70455 Jy ! Total flux subtracted in 200 components = 0.70455 Jy ! Clean residual min=-0.006021 max=0.008920 Jy/beam ! Clean residual mean=0.000063 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.70455 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.70455 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7626 mas, bmaj=1.922 mas, bpa=-0.5828 degrees ! Estimated noise=531.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149052 Jy ! Component: 100 - total flux cleaned = 0.0232802 Jy ! Component: 150 - total flux cleaned = 0.0284714 Jy ! Component: 200 - total flux cleaned = 0.0320974 Jy ! Total flux subtracted in 200 components = 0.0320974 Jy ! Clean residual min=-0.003252 max=0.003843 Jy/beam ! Clean residual mean=0.000042 rms=0.000827 Jy/beam ! Combined flux in latest and established models = 0.736647 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.736647 Jy ! Inverting map ! Added new window around map position (-1.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275155 Jy ! Component: 100 - total flux cleaned = 0.0036152 Jy ! Component: 150 - total flux cleaned = 0.00375321 Jy ! Component: 200 - total flux cleaned = 0.00405223 Jy ! Total flux subtracted in 200 components = 0.00405223 Jy ! Clean residual min=-0.002405 max=0.002103 Jy/beam ! Clean residual mean=0.000018 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.740699 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 60 components and 0.740699 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.398 mas, bmaj=4.626 mas, bpa=-5.261 degrees ! Estimated noise=709.442 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124518 Jy ! Component: 100 - total flux cleaned = 0.00145138 Jy ! Component: 150 - total flux cleaned = 0.00163337 Jy ! Component: 200 - total flux cleaned = 0.00184809 Jy ! Total flux subtracted in 200 components = 0.00184809 Jy ! Clean residual min=-0.001788 max=0.001458 Jy/beam ! Clean residual mean=0.000018 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.742548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169851 Jy ! Component: 100 - total flux cleaned = 0.000366757 Jy ! Component: 150 - total flux cleaned = 0.000467482 Jy ! Component: 200 - total flux cleaned = 0.000524419 Jy ! Total flux subtracted in 200 components = 0.000524419 Jy ! Clean residual min=-0.001533 max=0.001426 Jy/beam ! Clean residual mean=0.000012 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.743072 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 83 components and 0.743072 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7626 mas, bmaj=1.922 mas, bpa=-0.5828 degrees ! Estimated noise=531.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357333 Jy ! Component: 100 - total flux cleaned = -0.000615445 Jy ! Component: 150 - total flux cleaned = -0.000807996 Jy ! Component: 200 - total flux cleaned = -0.000912416 Jy ! Total flux subtracted in 200 components = -0.000912416 Jy ! Clean residual min=-0.001943 max=0.001403 Jy/beam ! Clean residual mean=0.000007 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.742159 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 94 components and 0.742159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080901Jy sigma=0.000602 ! Fit after self-cal, rms=0.080889Jy sigma=0.000602 wmodel J1322-0937_X_2014_01_04_pus_map.mod ! Writing 94 model components to file: J1322-0937_X_2014_01_04_pus_map.mod wobs J1322-0937_X_2014_01_04_pus_uvs.fits ! Writing UV FITS file: J1322-0937_X_2014_01_04_pus_uvs.fits wwins J1322-0937_X_2014_01_04_pus_map.win ! wwins: Wrote 4 windows to J1322-0937_X_2014_01_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000836392 Jy ! Component: 100 - total flux cleaned = -0.00152586 Jy ! Component: 150 - total flux cleaned = -0.00209037 Jy ! Component: 200 - total flux cleaned = -0.00251404 Jy ! Component: 250 - total flux cleaned = -0.00280175 Jy ! Component: 300 - total flux cleaned = -0.00304956 Jy ! Component: 350 - total flux cleaned = -0.00324479 Jy ! Component: 400 - total flux cleaned = -0.00341126 Jy ! Component: 450 - total flux cleaned = -0.00353712 Jy ! Component: 500 - total flux cleaned = -0.00362577 Jy ! Component: 550 - total flux cleaned = -0.0037106 Jy ! Component: 600 - total flux cleaned = -0.00379117 Jy ! Component: 650 - total flux cleaned = -0.00385526 Jy ! Component: 700 - total flux cleaned = -0.00389294 Jy ! Component: 750 - total flux cleaned = -0.00391689 Jy ! Component: 800 - total flux cleaned = -0.00392851 Jy ! Component: 850 - total flux cleaned = -0.00386169 Jy ! Component: 900 - total flux cleaned = -0.00382962 Jy ! Component: 950 - total flux cleaned = -0.00385055 Jy ! Component: 1000 - total flux cleaned = -0.00382987 Jy ! Component: 1050 - total flux cleaned = -0.00385972 Jy ! Component: 1100 - total flux cleaned = -0.00384981 Jy ! Component: 1150 - total flux cleaned = -0.00386902 Jy ! Component: 1200 - total flux cleaned = -0.00390627 Jy ! Component: 1250 - total flux cleaned = -0.00395174 Jy ! Component: 1300 - total flux cleaned = -0.00397861 Jy ! Component: 1350 - total flux cleaned = -0.00401356 Jy ! Component: 1400 - total flux cleaned = -0.00403076 Jy ! Component: 1450 - total flux cleaned = -0.00404761 Jy ! Component: 1500 - total flux cleaned = -0.00405606 Jy ! Component: 1550 - total flux cleaned = -0.00409673 Jy ! Component: 1600 - total flux cleaned = -0.00411273 Jy ! Component: 1650 - total flux cleaned = -0.00414419 Jy ! Component: 1700 - total flux cleaned = -0.00419057 Jy ! Component: 1750 - total flux cleaned = -0.00422855 Jy ! Component: 1800 - total flux cleaned = -0.00425845 Jy ! Component: 1850 - total flux cleaned = -0.00428787 Jy ! Component: 1900 - total flux cleaned = -0.00432407 Jy ! Component: 1950 - total flux cleaned = -0.00435977 Jy ! Component: 2000 - total flux cleaned = -0.00438081 Jy ! Total flux subtracted in 2048 components = -0.00436685 Jy ! Clean residual min=-0.000355 max=0.000421 Jy/beam ! Clean residual mean=-0.000002 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.737793 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 222 components and 0.737793 Jy ![Exited script file: muppet] wmap "J1322-0937_X_2014_01_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7626 x 1.922 at -0.5828 degrees (North through East) ! Clean map min=-0.0010835 max=0.68872 Jy/beam ! Writing clean map to FITS file: J1322-0937_X_2014_01_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.688718 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00012463 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0542879 0.0542879 0.108576 0.217151 0.434303 0.868606 1.73721 3.47442 6.94885 13.8977 27.7954 55.5908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.688 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7626 x 1.922 at -0.5828 degrees (North through East) ! Clean map min=-0.0010835 max=0.68872 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1322-0937_X_2014_01_04_pus_uvs.log closed on Fri Jan 13 17:25:44 2017